Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.2 LAccepted-AOC | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹45.0 L+₹1.8 L (4.06%)Rejected-Finance | L2 | Rejected-Finance Higher bid value. | |
| 3 | L3₹45.1 L+₹1.8 L (4.28%)Rejected-Finance | L3 | Rejected-Finance Higher bid value. | |
| 4 | L4₹45.3 L+₹2.1 L (4.86%)Rejected-Finance | L4 | Rejected-Finance Higher bid value. | |
| 5 | L5₹45.6 L+₹2.4 L (5.53%)Rejected-Finance | L5 | Rejected-Finance Higher bid value. |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
13 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim PIN-737102
PROVN OF 02 X SINGLE OFFR ACCN AT 17 MTN DIV ARTY BDE CAMP AT PENANGLA UNDER GE GANGTOK
2023_MES_602750_1
8134/A/E8
Open Tender
Civil Works
Works
182 days
GE Gangtok New Mil Stn Gangtok
As per tender documents
8 documents required · 8 mandatory
₹500
GE Gangtok
₹87,000
Yes
4 Sept 2023
12 Jun 2023
14 Jul 2023
13 Jun 2023
13 Jul 2023
20 Jun 2023
Amount
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil soil
Rough excavation not exceeding 1.5 m deep and getting out
Excavation in trenches n.exc 1.5 m in depth and 1.5 m in width for foundation etc and getting out in soft / loose soil
Removing excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m the starting point
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregare) as in foundation filling & mass concrete
M&L for RR uncoursed well bonded beded and solidly hearted built in 1:6 CM
M&L for design mix concrete grade M-25 for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete
M&L for design mix concrete grade M-25 for columns, pillars, piers, posts and struts
M&L for design mix concrete grade M-25 for slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and in RCC band etc all as specified and directed.
M&L for fair rough finished formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter
M&L for fair rough finished formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M&L for fair rough finished formwork to sides of pillars, posts, struts, piers, columns and stanchions
M&L for cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate as in intel,coping etc complete all as specified.
M&L for TMT bars 10 mm dia and over cut to length and bent to shape required including cranking, hooking ends and binding with and MS wire not less than 0.9 mm dia or securing with clips
All as per item No 15 above but 5mm dia and over upto and including 10mm dia in stirrups spacers and binders etc as specified and directed.
M/L for precast hollow block massonary of 1:3:6 type C1 using 20 mm graded stone aggregate exe 10 CM width and setting in CM morter 1:6
M&L for 20 mm thick rendering in two layers 10 mm each in cement mortar (1:4) with using water proofing compound in external layer as per manufacturer instructions on other than fair faces of brick / concrete surfaces, top layer finishes even and smooth using without extra cement complete all as specified and directed. Note : Liquid WPC measured and paid saperately in relevent items
M&L for rendering 15mm thick on fair face of brick or concrete surfaces in cement mortar (1:6) finished even and smooth using without extra cement complete all as specified and directed
M&L for preparation of new plaster surfaces and aplying three coats of white wash on walls
Supply only integral water proofing compound
Sand filling under floor in layers n.exc 25 cm thick including watering, ramming and consolidation etc complete
M&L for 75mm PCC 1:4:8 type D-2 using 40mm graded stone aggregare as in sub base of floor
M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate finished and even as in floor
M&L for 20mm thick screed bed in cement mortar (1:6) for laying floor finishes etc
M&L Non skid ceramic coloured tiles 7 to 8 mm thick(square/rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 sqm , in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match.
M&L for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match
M&L for Vtirified Ceramic tiles 10 mm thick (square/ rectangular) polished dark shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match
M&L For Green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of green.
S/F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.45mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified and directed by Engr-in-Charge
S/F Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.45 mm thick of any colour having tensile strength of 550 mpa as in roof covering,ridges, valley, vally gutter, as in eaves and in cladding to wall fixed with self tapping screws as specified and all as directed by Engr-in-Charge
M&L rolled section steel work in Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410 -W (Gde- E- 250) quality- A completed.
M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide completed.
M&L preparation of new or previously untreated wooden surfaces of any description exc 10 cm in width and grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & as directed.
S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tub fixing in opening as per specification and drawing
S&F factory made solid panel PVC door shutter 30mm th (style) consisting of frame made out of MS tubes for top & bootom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rails on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the stiles & rails with suitable PVC sheet beading & joined together with solvent cement suppling & fixing in the frame at site as specification & drawing
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F for power coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screwsetc. complete all as specified
S&F for 5.5mm thick sheet glass, ordinary quality in square n exc 0.5 sq. m in each pane
S&F for 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long
S&F Gl frame work for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm ixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
Supply and fix 4mm thick Non asbestos fibre cement building boards (E-board) of approved texture, for insulation and acoustic purpose of size 595 x 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surfaces and applying two coats of oil emulsion diatemper over a coat of primer including preparation of surfaces complete all as specified and directed by the Engr-in Charge.
M&L for providing, 1:2:4 type B1 20mm graded cement concrete in kerbs or mud stops, rounded or chamfered on edges
S&F 100mm long butt hinges, medium weight, cold rolled, mild steel complete all as specified.
S&F for 75mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed tuype C-21
S&F for 150 mm long aluminimum anodised barrel tower bolt
S&F for 100 mm long aluminimum anodised barrel tower bolt
S&F for 150 mm long extruded aluminium alloy handles, fabricated type, anodised
S&F for 15 mm bore steel tubing medium grade galvanised with all fittinged complete to walls & laid in floors
S&F for 20 mm bore steel tubing medium grade galvanised with all fittinged complete to walls & laid in floors
S&F 150mm dia Laying of CPVC pipes & fittings any grade in trenches
S&F of PVC 'P' or 'S' trap 110mm bore complete all as specified and directed by the Engr-in-Charge.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by the Engr-in-Charge.
S&F for 110mm dia PVC (SWR) bends any radius
S&F for 75mm dia PVC (SWR) bends any radius
S&F for 110mm dia PVC (SWR) junction single (Single T) any radius
S&F for 500 Liter rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified. Including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed
S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
M&L for 150mm dia pipe cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required
S& FSoap dish, vitreous China white, approximate size 160x 160x90mm. any type, fixed to plugs with chromium plated brass screw complete all as specified and directed.
S&F CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified
Concrete bed to drain pipe of 150 m dia including packing under and haunching against the side or pipe after they are laid and tested in
M&L for hard core of gauge n.exc .63 mm deposited spead, levelled, watered well rammed toa uniform smooth surface n.exc 15 cm thick using broken stone or boulder
M&L for PCC 1:3:6 type C-2 (using 40mm stone agg) as in plinth protection, path etc 75 mm thick finishing surfaces even and smooth without using extra cement including construction joints at every 3 m interval and each coner and provition of mastic filling
S&F for vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified
S&F for PVC low level flushing cistern of 10 ltrs capacity action type white body with intel ball valve float handle bracket flush pipe etc complete and connecting to WC with PVC flushing pipe ( Make :- Paryware/Hindware/Cera) complete all as specified and directed by the Engr-in-Charge.
S&F for Grating doom 100mm dia of PTMT
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.
S&F for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides
S&F for second class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. supplied and fitted to chowkats
S&f for toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.
M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey pigment cement and pigments in floors
Supply and fixing fancy typeCP 15 mm bore bib taps cast copper alloy with crtuch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified.
S&F of cast iron Nahani trap 100 mm mm bore
S&F 75mm dia PVC (SWR) pipes single socketed in any lenth with rubber ring joints, fixed with wall etc
S&F 75mm PVC (SWR) vent cowl etc.
S & F Brass chromium plated shower rose 125mm size
S&F stop valves fancy type 15 mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for pipe or for unions and fixed.
M&L for precast RCC 1:2:4 manhole cover extra set in cement mortar 1:6
S/F for CP basin mixer with with all fittings complete all as specified and directed by the Engr-in-Charge. Model No KUP -35051BPM Make Jaquar or equivlant
S&F 08-10mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, coner cove,F/J edge trims where required fixed including screws to steel/wooden frame work complete all as specified and as directed.
S/F for wall mixer with bend pipe with built in non return valve with all fittings complete all as specified and directed
S/F Wash basins, Vitreous China (flat back or angle back type) of size 630x450mm inlcuding matching pedastal fixed with and including cp brackets with complete fitting complete all as specified and directed
M&L for Plain cement concrete 1:3:6,concrete , type C-2 as in retaining walls etc complete all as specified and as directed.
S/F 75mm bore PVC pipe (SWR) single socketed, in any length with rubber ring joints, as in weep holes complete all as specified and directed..
Hand packing using Broken stone or boulders (any thickness) at back of bock masonary retaining wall and raising or lowering to the required level complete all as specified.
M/L form work to faces of walls, retaining walls, etc vertical or to batter rough finished surfaces of concrete (flat) complete all as specified and as directed.
M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels/drain including forming fair finished to drain channel.completed all as specified and as directed.
M/L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including formwork moulds mitres/stopped ends etc complete al specified and directed. ( Note:- add and deduct for each 25 mm girth por part of over or under 30 cm shall be considered in measurement calculation in MB.
S/F of geosynthetic materials 75 mm dia as in weep holes cover as directed.
M & L for point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) Cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25 mm size PVC casing caping (Double lock) with all casing capping fittings & accessories with 1.60 mm thick pressed steel or mild steel sheet sunk box covered with 3 mm thick backelite sheet fixed with brass screws & cup washers including 1.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch / DB's or common earth dolly complete for for light point/ fan point/ exhaust fan point/ call bell point controlled by one No 5/6 Amp one way switch complete all as specified and directed.
All as per Sl item No. 102 here-in-above but one exhaust fan/ceiling fan controlled by one, one way 5/6 Amp switch.
All as per Sl item No. 102 here-in-above but one call bell/buzzer point controlled by one bell push
All as per Sl item No. 102 here-in-above but one 3 pin 5 Amps switch socket outlet point on independent board.
All as per Item Sl No 102 here-in-before but wiring with 2.5 Sqmm multistranded cable and earth wire with copper conductor of size 2.5 Sqmm for 15 amps power point.
All as per Item Sl No 102 here-in-before but wiring with 4 Sqmm multistranded cable and earth wire with copper conductor of size 4Sqmm for Metal clad socket.
Supply and fix modular switch 1 way 6 A, 1 module 230 Volts, 50 Hz, ISI marked all as specified and as directed.
Supply and fix Modular Socket, 6A-2/3 pin combined 2 module 230 Volts, 50 Hz, ISI marked all as specified and as directed.
Supply and fix Modular switch 1 way 16 A, 1 module 230 Volts, 50 Hz, ISI marked all as specified and as directed.
Supply and fix Modular Socket, 6A/16A-2/3 pin combined 2 module 230 Volts, 50 Hz ISI Marked all as specified and as directed.
Supply and fix Modular bell push 6A module 230 Volts, 50Hz, ISI Marked all as specified and as directed.
Supply and fix Bell, AC 230 volts, single pole all as specified and as directed.
S&F in repairs ceiling rose, PVC/polycarbonate insulated body, 3 terminal and 230 volts, ISI marked surface bakelite suitable for batten fitting complete all as specified and directed
Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
Supply & fix Color changing LED tube light batten 20 watts with options of 3000 K, 4000 K & 6500 K, all in one fixture, with suitable fixing arrangements complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size all as specified and as directed.
Supply & fix LED Mirror light along with fixture, 5 watts with suitable fixing arrangements complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size all as specified and as directed.
Supply and fixing LED light fitting 1x9W/1x10W bulk head luminairies including LED light driver holder connecting connecting up with three core flexible copper flexible copper conductor cable of suitable size complete all as directed.
Supply & fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 16 amps all as specified.
Supply & fix MCB DB, TPN 4 way, double door incommer MCB 63 A TPN 415 Volts 16 KA, with 200 A bus bar and separate link for common link for neutral and earth, complete all as specified and directed by Engr-In-Charge.
S&F Sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 12 Way with 200 Amps rated copper bus bar double door type complete all as specified and as directed.
S&F MCB Triple pole & neutral 63 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge.
S&F MCB single pole & neutral 40 to 63 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge.
S&F MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge.
Material & Labour for Sub Main Wiring with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 6 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. NOTE two run of 6 sq.mm & One run of 6 sq.mm & One run of PVC condult with accessories shall be measured as One length.
Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level connected with galvanised Iron/steel earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to TPN DB Including necessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc complete all as specified and directed by Engineer-in-Charge including testing on completion.
Supply and fox exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm
Supply, installation, testing and commissioning of electric water heater, storage vertical type, BEE 5 star rated, 25 Ltr capacity 230 volts AC, 50 Hz comprising of high wattage heating element for instant heating, extra thick SS inner tank of superior 304 grade, rust & sock proof ABS outer body, non-ferrous pressure plate with & including provision of Pressure relief valve and grouting bolts suitably flushed to wall or any other surface including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/flexible chord complete all as specified and as directed.Make Model No GHWAMGTWH025 of Havells or eqv as approved make.
M&L for Galvanised strip 32 x 6 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and as directed.
M&L for Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and as directed.
M&L for Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified.
M&L for Air Epoxy insulator with hole for suitable screw fitting and all screw and nut accessories fo fixing strip complete all as specified and as directed.
Material & Labour for PCC 1:32:4 type B1 (using 20 mm aggreated) as in platform plinth and misc sikilar works including necessary former finishing the surface even and smooth without using extra cemnt complete all as specified and directed.
M&L for light grade galvanized pipe (ISI markded) with all fittifngs fixed to pole, laid in trenches, floor pipes etc bore of siz 40mm dia complete all as specified and directed.
M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex head screw.
Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate electrode not less than 1.5 m below normal ground level, connected to including galvanised iron strip size 32 x 6 mm by means of bolts, nuts, and washers of galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part I connected to earth test point including provision of earth strip protected by 40 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of strata, PCC pit with RCC cover, Cl frame, char coal, salt & funnel etc complete all as specified or indicated including testing on completion. Rate to be considered for earth strip to be fixed 7.5 m Complete all as specified and directed
Supply, Laying, jointing & testing in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with cable size aluminum lugs and testing. XLPE insulated, armoured heavy duty electric cables with aluminum conductor, 1100 volt grade, all as specified directed by Engineer In charge of cross sectional area of 16 Sqmm 2 core
Supply and laying DWC pipe SN-4 with coupler 50 mm OD,ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. laid in trenches/ fixed to pole /laying under road crossing/fixed on pavement walls with clamps complete all as specified and as directed.
Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for laying cable, pole foundation etc complete all as specified.
Returning filling in soft/loose soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and as directed.
Removal of surplus excavated (soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed.
Supply and laying steel water tubing medium grade galvanised with all fittings such as elbow, union, reducer, tees bends etc and short length fixed on wall/floor/ceiling complete all as specified and as directed of size 25mm bore
S & F Gun Metal valve of dia 25 mm
KARMA TSETEN BHUTIA
M/S ANIL KUMAR THAKUR
KARMA SHERPA
KAMLESH ENTERPRISE
MAHENDRA KHAWAS
DHARMINDER SINGH
BIJAY MITTAL
M/S S. S CHETTRI AND SONS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .