Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹31.4 L
EMD Value
₹62,800
Closing Date
1 Jul 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Providing Extension to Reception Building at RWR / DC, HAL Including Electrical Works.
7168
TENDER NOTICE/NCP/02/24-25 /04
Works
Contract Section Civil-FMD-Bangalore
₹0
₹62,800
1 Jul 2024
30 Apr 2024
30 Apr 2024
1 Jul 2024
HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION
NAME OF THE WORK: “Providing Extension to Reception Building at RWR & DC, HAL [DC] – [Including Electrical Works]." CONTRACT NO. HAL/FMD/C-05/24-25
Name of the Tenderer:
Sl. No Specification Quantity Unit Rate in Figs [Excluding GST] Rate in words Amount
Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The tenderer shall abide by prevailing GST act. (2) This BOQ specifications have to be read in conjunction with detailed technical specification and tender drawings if any. (3) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (4) The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST based on the quoted percentage.
PART - 'A' - CIVIL WORKS
1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) complete as per direction of Engineer in Charge. 16.00 Cu m 2313.57 Rupees Two Thousand Three Hundred Thirteen and Fifty Seven Paise Only 37017.12
2 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. In cement mortar complete as per direction of Engineer in Charge. 5.00 Cu m 1958.06 Rupees One Thousand Nine Hundred Fifty Eight and Six Paise Only 9790.30
3 Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge 5000.00 Kgs 3.66 Rupees Three and Sixty Six Paise Only 18300.00
4 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet 25.00 Sq m 156.77 Rupees One Hundred Fifty Six and Seventy Seven Paise Only 3919.25
5 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. All kinds of soil 130.00 Cu m 168.70 Rupees One Hundred Sixty Eight and Seventy Paise Only 21931.00
6 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m complete as per direction of Engineer in Charge. 40.00 Cu m 186.28 Rupees One Hundred Eighty Six and Twenty Eight Paise Only 7451.20
7 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved complete as per direction of Engineer in Charge. 20.00 Cu m 250.86 Rupees Two Hundred Fifty and Eighty Six Paise Only 5017.20
8 Providing and laying 1:4:8 (1 Cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal size). For Foundation complete as per direction of Engineer in Charge. 12.00 Cu m 6474.29 Rupees Six Thousand Four Hundred Seventy Four and Twenty Nine Paise Only 77691.48
9 Providing and laying 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) For Plinth Course 3.00 Cu m 7487.92 Rupees Seven Thousand Four Hundred Eighty Seven and Ninety Two Paise Only 22463.76
10 Providing and laying cement concrete for floor tiling, 1:2:4 (1Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) complete as per direction of Engineer in Charge. 5.00 Cu m 9404.64 Rupees Nine Thousand Four Hundred Four and Sixty Four Paise Only 47023.20
11 Providing and laying in position ready mixed cement concrete M25 grade for plain cement concrete work;using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS:9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete.
a) All works upto plinth level 16.00 Cu m 9033.54 Rupees Nine Thousand Thirty Three and Fifty Four Paise Only 144536.64
b) All works above plinth 20.00 Cu m 9371.56 Rupees Nine Thousand Three Hundred Seventy One and Fifty Six Paise Only 187431.20
12 Centering and shuttering including strutting, propping etc. and removal of form work complete as per direction of Engineer in Charge for :
a) For foundations, footings, bases of columns,Pedestal and plinth beams, Plinth bands and similar work; vertical or to batter. 70.00 Sq m 372.71 Rupees Three Hundred Seventy Two and Seventy One Paise Only 26089.70
b) form work to sides of columns. 40.00 Sq m 913.64 Rupees Nine Hundred Thirteen and Sixty Four Paise Only 36545.60
c) form work to sides and soffits of floor or roof beams, beams haunchings, girders, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams, etc 35.00 Sq m 881.28 Rupees Eight Hundred Eighty One and Twenty Eight Paise Only 30844.80
d) form work to chullah hoods, chajjas, troughs and similar items including edges 6.00 Sq m 903.95 Rupees Nine Hundred Three and Ninety Five Paise Only 5423.70
e) form work to sides and soffits of floor or roof slabs, beams haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams, etc 70.00 Sq m 881.28 Rupees Eight Hundred Eighty One and Twenty Eight Paise Only 61689.60
13 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more complete as per direction of Engineer in Charge. 6000.00 Kgs 102.50 Rupees One Hundred Two and Fifty Paise Only 615000.00
14 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) complete as per direction of Engineer in Charge. 20.00 Cu m 8654.51 Rupees Eight Thousand Six Hundred Fifty Four and Fifty One Paise Only 173090.20
15 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) complete as per direction of Engineer in Charge. 8.00 Cu m 6948.79 Rupees Six Thousand Nine Hundred Forty Eight and Seventy Nine Paise Only 55590.32
16 Plastering in cement mortar 1:6 (1 cement : 6 fine sand) 15mm thick to internal brick work or concrete surfaces finished smooth with neeru finish including scaffolding, curing etc., all complete as directed by the EIC. 110.00 Sq m 375.75 Rupees Three Hundred Seventy Five and Seventy Five Paise Only 41332.50
17 Plastering in cement mortar 1:4 (1 cement : 4 fine sand) 12mm thick to ceiling, finished smooth with neeru finish including scaffolding, curing etc., all complete as directed by the Engineer-in-Charge. 220.00 Sq m 329.85 Rupees Three Hundred Twenty Nine and Eighty Five Paise Only 72567.00
18 Plastering18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 finished with a top layer 6mm thick cement plaster 1:6. external brick work or concrete surfaces finished smooth with trowel and fair finish for exterior surfaces of walls or concrete surfaces including scaffolding, curing etc., all complete as directed by the Engineer-in-Charge. 60.00 Sq m 492.84 Rupees Four Hundred Ninety Two and Eighty Four Paise Only 29570.40
19 Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).etc., all complete as directed by the Engineer-in-Charge. 60.00 Sq m 505.67 Rupees Five Hundred Five and Sixty Seven Paise Only 30340.20
20 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. 110 mm diameter complete as per direction of Engineer in Charge. 15.00 R m 358.69 Rupees Three Hundred Fifty Eight and Sixty Nine Paise Only 5380.35
21 Providing and fixing 25 mm dia nominal bore G.I. Pipes complete with G.I. fittings and clamps,i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall complete as per direction of Engineer in Charge. 18.00 R m 444.56 Rupees Four Hundred Forty Four and Fifty Six Paise Only 8002.08
22 Supplying and fixing 25 mm dia gun metal gate Valves with iron wheel head screwed both ends for Iron pipes and fixed, of approved brand fixed to GI pipe etc., all complete as directed by Engineer-In-Charge. 2.00 Nos 562.08 Rupees Five Hundred Sixty Two and Eight Paise Only 1124.16
23 Supplying and fixing in position as per direction of EIC second class hard wood (Mathi wood) as approved by HAL, Plain, solid, straight chowkats frame work for doors of approved design,framed rebated on solid, rounded or chamfered, put together with glue pinned at joints. The timber shall be seasoned to a moisture content not more than 12% as per IS 287 and conforming to IS 1141 and treated with anti termite treatment by painting with tar or coal tar black paint (approved make) the ends of posts and back of chowkats complete, including rebating for fixing the shutters and fixing necessary holdfasts with screws etc., as directed by Engineer-In-Charge (Sample to be got approved before ordering). 0.20 Cu m 110743.66 Rupees One Lakh Ten Thousand Seven Hundred Forty Three and Sixty Six Paise Only 22148.73
24 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters,30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws complete as per direction of Engineer in Charge. 6.00 Sq m 3010.90 Rupees Three Thousand Ten and Ninety Paise Only 18065.40
25 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete as per direction of Engineer in Charge. 2.00 Nos 934.41 Rupees Nine Hundred Thirty Four and Forty One Paise Only 1868.82
26 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete as per direction of Engineer in Charge. 2.00 Nos 812.28 Rupees Eight Hundred Twelve and Twenty Eight Paise Only 1624.56
27 Supplying and fixing the following fittings and fixtures of approved manufacture to door with all required screws, bolts, nuts and washers of approved manufacture all complete as directed by the Engineer-In-Charge.
a) Providing and fixing 150mm long aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of Engineer in Charge. 2.00 Nos 78.46 Rupees Seventy Eight and Forty Six Paise Only 156.92
b) Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete as per direction of Engineer in Charge. 2.00 Nos 37.64 Rupees Thirty Seven and Sixty Four Paise Only 75.28
c) Providing and fixing125mm dia aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of Engineer in Charge. 2.00 Nos 62.97 Rupees Sixty Two and Ninety Seven Paise Only 125.94
28 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,
shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) complete as per direction of Engineer in Charge. 40.00 Sq m 1288.58 Rupees One Thousand Two Hundred Eighty Eight and Fifty Eight Paise Only 51543.20
29 Providing, fixing, testing and commissioning trap ( floor trap ) of approved make with 100 mm inlet and 75 mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors , connection with PVC soil / waste pipe, necessary 150 mm thick cement concrete (1:2:4) for embedding the trap,etc.,all complete as directed by the Engineer-in-Charge. 2.00 Nos 562.08 Rupees Five Hundred Sixty Two and Eight Paise Only 1124.16
30 Providing and fixing toilet paper holder : C.P. brass complete as per direction of Engineer in Charge. 1.00 No 763.86 Rupees Seven Hundred Sixty Three and Eighty Six Paise Only 763.86
31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per direction of Engineer in Charge. 1.00 No 1528.24 Rupees One Thousand Five Hundred Twenty Eight and Twenty Four Paise Only 1528.24
32 Providing and fixing 20mm dia chromium plated brass curtain rod /Towel rail of 600mm long having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete as per direction of Engineer in Charge. 2.00 Nos 373.75 Rupees Three Hundred Seventy Three and Seventy Five Paise Only 747.50
33 Supplying and fixing 15mm dia CP brass bib tap with wall flange of approved manufacture fixed to GI pipe with all required GI specials etc., all complete as directed by Engineer in Charge. 2.00 Nos 481.68 Rupees Four Hundred Eighty One and Sixty Eight Paise Only 963.36
34 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 80mm dia, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 12.00 R m 2058.95 Rupees Two Thousand Fifty Eight and Ninety Five Paise Only 24707.40
35 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 100mm dia, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 12.00 R m 3109.50 Rupees Three Thousand One Hundred Nine and Fifty Paise Only 37314.00
36 Supplying and fixing of High intensity retro - reflective sheet as per IRC 67-2001 sticked to glass panes as per instructions of manufacturer etc., all complete as directed by the Engineer-in-Charge. 6.00 Sq m 677.97 Rupees Six Hundred Seventy Seven and Ninety Seven Paise Only 4067.82
37 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 100.00 Kgs 226.53 Rupees Two Hundred Twenty Six and Fifty Three Paise Only 22653.00
38 Supplying and Fixing of "SUNLOCK / PRESTER / HILUX or other equivalent" delux model 100mm width fabric washable scotch guard vertical blinds using powder coated aluminium channel and fittings with complete accessories including capping on both sides etc., all complete as directed by the Engineer-In-Charge. (MR) 30.00 Sq m 1355.93 Rupees One Thousand Three Hundred Fifty Five and Ninety Three Paise Only 40677.90
39 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer in-Charge 12.00 R m 468.27 Rupees Four Hundred Sixty Eight and Twenty Seven Paise Only 5619.24
40 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing 30 mm thick plain PVC door shutterscomplete as per direction of Engineer-in-charge. 4.00 Sq m 3025.15 Rupees Three Thousand Twenty Five and Fifteen Paise Only 12100.60
41 Providing and laying Vitrified tiles- Anti skid in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 600 x 600 mm,complete as per direction of Engineer-in-charge. 4.00 Sq m 1392.23 Rupees One Thousand Three Hundred Ninety Two and Twenty Three Paise Only 5568.92
42 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as per direction of Engineer-in-charge. 6.00 Sq m 1205.09 Rupees One Thousand Two Hundred Five and Nine Paise Only 7230.54
43 15 mm cement plaster on the rough side of single or half brick wall of mix : (1 cement: 4 fine sand) 50.00 Sq m 379.64 Rupees Three Hundred Seventy Nine and Sixty Four Paise Only 18982.00
44 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid complete as per direction of Engineer-in-charge. 1.00 No 6192.53 Rupees Six Thousand One Hundred Ninety Two and Fifty Three Paise Only 6192.53
45 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern 1.00 No 5948.47 Rupees Five Thousand Nine Hundred Forty Eight and Forty Seven Paise Only 5948.47
46 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps complete as per direction of Engineer-in-charge. 1.00 No 2187.64 Rupees Two Thousand One Hundred Eighty Seven and Sixty Four Paise Only 2187.64
47 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms complete as per direction of Engineer-in-charge. 1.00 No 160.00 Rupees One Hundred Sixty Only 160.00
48 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture complete as per direction of Engineer-in-charge. 6.00 Sq m 162.24 Rupees One Hundred Sixty Two and Twenty Four Paise Only 973.44
49 Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50grams/ litre after applying white cement based putty of average thickness 1mm over the plastered wall surface including preparation of the surfces, with a coat of low VOC primer with emery paper to bring to smooth and even including applying additional coats wherever required to achieve even shade and colour of approved brand,complete as per direction of Engineer-in-charge. 200.00 Sq m 354.32 Rupees Three Hundred Fifty Four and Thirty Two Paise Only 70864.00
50 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm, complete as per direction of Engineer-in-charge. 300.00 Sq m 172.26 Rupees One Hundred Seventy Two and Twenty Six Paise Only 51678.00
51 Providing and laying Vitrified tiles in floor / skirting with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 500x500 mm complete as per direction of Engineer-in-charge. 46.00 Sq m 1612.11 Rupees One Thousand Six Hundred Twelve and Eleven Paise Only 74157.06
52 Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod pf approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge.
Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS:16231 shall be paid separately. Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (98mm & above) x (40mm & above) & both glazed and fly screen sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system, (Height upto 1.8m). 9.00 Sq m 10335.10 Rupees Ten Thousand Three Hundred Thirty Five and Ten Paise Only 93015.90
Sub-Total of Part 'A' - Civil Works (Excluding GST) Rupees Twenty Three Lakh Fifty Nine Thousand Nine Hundred Ninety Seven and Thirty Nine Paise Only 2359997.39
PART - 'B' - ELECTRICAL WORKS
1 Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of suitable rating tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:
a) 8 way (4+24) double door (Ref: DSR no.2.5.2) 1.00 Each 10178.89 Rupees Ten Thousand One Hundred Seventy Eight and Eighty Eight Paise Only 10178.89
b) 6 way double door (Ref: DSR no.2.3.1) 1.00 Each 2209.02 Rupees Two Thousand Two Hundred Nine and One Paise Only 2209.02
c) 125A, 36KA, FP MCCB (Ref: DSR no.2.2.14) 1.00 Each 8220.21 Rupees Eight Thousand Two Hundred Twenty and Twenty One Paise Only 8220.21
d) Supply and fixing 16 A rating , 240/415V, 10kA, "C" curve, miiniature circuit bracker suitable for inducive load of Single Pole in the exesting MCB DB complete with connections, testing and commessioning etc., as required. (Ref: DSR no.2.10.1) 15.00 Each 256.34 Rupees Two Hundred Fifty Six and Thirty Four Paise Only 3845.10
e) Supply and fixing 32 A rating , 240/415V, 10kA, "C" curve, miiniature circuit bracker suitable for inducive load of Triple Pole and neutral in the exesting MCB DB complete with connections, testing and commessioning etc., as required. (Ref: DSR no.2.10.5) 3.00 Each 1229.67 Rupees One Thousand Two Hundred Twenty Nine and Sixty Seven Paise Only 3689.01
f) Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 3.00 Each 1623.22 Rupees One Thousand Six Hundred Twenty Three and Twenty Two Paise Only 4869.66
2 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.(including supply of wiring and PVC Conduit)
a) Light points (Switch control) at three locations (Ref: DSR no.1.10.3) 20.00 Pts 1469.00 Rupees One Thousand Four Hundred Sixty Nine Only 29380.00
b) Exhaust/Wall mounting Fan points (Ref: DSR no.1.10.3) 5.00 Pts 1469.00 Rupees One Thousand Four Hundred Sixty Nine Only 7345.00
3 Wiring for submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
a) 3 x 2.5 sq. mm (Ref: DSR no.1.14.2) 50.00 Mtr 275.37 Rupees Two Hundred Seventy Five and Thirty Seven Paise Only 13768.64
b) 3 x 4 sq. mm(For 6A & 16A power points) (Ref: DSR no.1.14.3) 70.00 Mtr 334.46 Rupees Three Hundred Thirty Four and Forty Five Paise Only 23412.03
4 Supplying and fixing following modular switch/ socket
a) Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular Switch connections etc. as required (Ref: DSR no.1.31) 25.00 Each 477.64 Rupees Four Hundred Seventy Seven and Sixty Four Paise Only 11941.00
b) Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular Switch connections etc. as required (Ref: DSR no.1.32) 6.00 Each 586.83 Rupees Five Hundred Eighty Six and Eighty Three Paise Only 3520.98
5 Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess as required.
a) 3 Module (Ref: DSR no.1.27.2) 5.00 Each 327.40 Rupees Three Hundred Twenty Seven and Forty Paise Only 1637.00
b) 6 Module (Ref: DSR no.1.27.4) 2.00 Each 402.50 Rupees Four Hundred Two and Fifty Paise Only 805.00
c) 8 Module (Ref: DSR no.1.27.5) 15.00 Each 454.60 Rupees Four Hundred Fifty Four and Sixty Paise Only 6819.00
6 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
a) 25MM PVC Conduit (Ref: DSR no.1.21.2) 80.00 Mtr 145.19 Rupees One Hundred Forty Five and Nineteen Paise Only 11615.59
7 Supplying of following size and conductor XLPE insulated armoured power cable of 1.1 KV grade confirming to IS: 7098 ( part-I)/1998 with upto date amendment including stacking at site, proper storage complete etc. as required
a) 3.5 CX 70 Sqmm Aluminium armoured conductor of approved make. (MR Ref: Havells Make) 70.00 Meter 639.83 Rupees Six Hundred Thirty Nine and Eighty Three Paise Only 44788.14
b) MV Cable Laying ( 35 Sqmm & UP to 95Sqmm) 70.00 Meter 45.06 Rupees Forty Five and Five Paise Only 3154.15
c) Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC shielded/XLPE aluminium conductor cable of 1.1 KV grade 3.5 C X 70Sq. mm 2.00 Each 468.64 Rupees Four Hundred Sixty Eight and Sixty Three Paise Only 937.27
8 Supply, installation, testing and commissioning of 36W (2' x2') recess mounted glare free LED Panel light fixture(full glow 2' x2' recess/surface mounted LED Panel light) of approved make. (MR Ref: Model No:CROMPTON- LCTLRNE-36-FO-CDL ) 8.00 Each 4341.53 Rupees Four Thousand Three Hundred Forty One and Fifty Two Paise Only 34732.20
9 LED diffuser light recess/surface mounted of approved make (MR Ref: Model No: CROMPTON- LCDSPLN-S-18-CDL) 8.00 Each 1784.75 Rupees One Thousand Seven Hundred Eighty Four and Seventy Four Paise Only 14277.97
10 Supply, installation, testing and commissioning of surface mounted 10W LED mirror light fixture (MR Ref: Model No:BAJAJ BCLSB 10 WH) 1.00 Each 547.46 Rupees Five Hundred Forty Seven and Forty Five Paise Only 547.46
11 Supply, installation, testing and commissioning of Wall Mounting Fans of approved make (MR REF: Wall Mounting Fans Model No:HAVELLS ) 4.00 Each 3945.76 Rupees Three Thousand Nine Hundred Forty Five and Seventy Six Paise Only 15783.05
12 Supply, installation, testing & commissioning of 250mm dia modular exhaust fan of any approved make with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge.(MR REF: 250MM HAVELLS Model: Ventil Air Dx off-white) 1.00 Each 1421.19 Rupees One Thousand Four Hundred Twenty One and Eighteen Paise Only 1421.19
a) Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. (Ref: DSR no.5.4) 1.00 Each 7482.21 Rupees Seven Thousand Four Hundred Eighty Two and Twenty One Paise Only 7482.21
b) Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. (Ref: DSR no.5.18) 100.00 Meter 42.06 Rupees Forty Two and Five Paise Only 4205.93
a) Supply & fixing of RJ 45 LAN Point (Dual) (RJ 45 (CAT 6A) socket outlet of approved make.(MR REF: Legrand Make) 6.00 Each 1361.86 Rupees One Thousand Three Hundred Sixty One and Eighty Six Paise Only 8171.19
b) Supply & drawing of Cat-6 Lan cable (Ref: DSR no.1.53.1) 100.00 Meter 57.08 Rupees Fifty Seven and Eight Paise Only 5708.47
a) Twin RJ 11 Telephone jack (Telephone Socket Outlet) (Ref: DSR no.1.24.6) 3.00 each 148.20 Rupees One Hundred Forty Eight and Twenty Paise Only 444.61
b) 10 pair unarmoured 0.5mm telephone cable of approved make. (MR Ref: Market rate of Polycab cable) 100.00 Mtr 120.34 Rupees One Hundred Twenty and Thirty Three Paise Only 12033.90
c) Cable Laying ( UP to 35Sqmm) (Ref: DSR no.7.6.1) 100.00 Meter 28.03 Rupees Twenty Eight and Three Paise Only 2803.39
Sub-Total of Part 'B' - Electrical Works (Excluding GST) Rupees Two Lakh Ninety Nine Thousand Seven Hundred Forty Seven and Twenty Six Paise Only 299747.27
Total of Part 'A' + 'B' - [Civil + Electrical Works] (Excluding GST) Rupees Twenty Six Lakh Fifty Nine Thousand Seven Hundred Forty Four and Sixty Five Paise Only 2659744.66
The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount
Tenderer's Quote (Excluding GST) 2659744.66 BELOW % 2659744.66
Add 18% GST Rupees Four Lakh Seventy Eight Thousand Seven Hundred Fifty Four and Three Paise Only 478754.04
Grand Total (Including GST) Rupees Thirty One Lakh Thirty Eight Thousand Four Hundred Ninety Eight and Sixty Nine Paise Only 3138498.70
Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.
Important Note: PLEASE ENTER PERCENTAGE QUOTE
HINDUSTAN AERONAUTICS LIMITED
Facilities Management Division
Pre-Qulification Profile (To Be uploaded along with Part A)
Tender Ref No. or Contract No.: HAL/FMD/C-05/24-25
Name of Work: Providing Extension to Reception Building at RWR & DC, HAL [DC] – [Including Electrical Works].
Estimated Amount in Rs.: 3140000
Tender Notice Date : 19.04.2024
PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3
Sl.No Description Details Enclosed / Not Enclosed Remarks
1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company
2 Type of ownership PlsEnter Type of Ownership
If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution
4 Address for correspondence: Pls Enter Address
5 (a) PAN No.: Pls Enter Pan NO
5 (b) Service Tax Registration No
5 (c ) Goods and Service Tax ID No.
6 Contact details
Contact person name Please Enter Contact person Name
Mobile No. Pls Enter Mobile No
Ph. No. with STD code
FAX No. with STD code 3 #N/A
7 Registered Contractor
If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1
Registration No. 199999 7 F 2
Category 200000 6 G 3
PEMD Amount ( If paid ) 499999 6 H 4
8 I.T Returns for past 03 years 999999 5 J 6
2023-24 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7
9 Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3
YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2
2022- 2023 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2
Average annual Financial turn over 0.00 942000.00
Avg Annual Turnover criteria is not met 10000000 1
10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed
ESI Registration No/. with proof if any Remarks if any
PF Registration No. with proof if any
Indemnity for any liability arising on account of ESI & PF act as per pro forma in tender document
11 Bank(s) details: [Copy of the cheque leaf to be uploaded]
Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Name of the Bank
Type of Account
12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal
Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000
Date of Issue 200000 40000
Value in Rs. 200001 150000
Solvency value is NOT as per NIT
13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. 1256000 500001 250000
Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000
Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000
Brief Description of Work: Please enter Details for Work No 1 2000000 500000
Completed value of Work in Rs. 2000001 1000000
Date of Commencement of Work 4000000 1000000
Date of Actual Completion of Work: 4000001 2000000
Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000
Brief Description of Work: Pls Enter Details for Work No II
Completed value of Work in Rs.
Date of Commencement of Work:
Date of Actual Completion of Work: work done
Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555
Brief Description of Work: Pls Enter Details for Work No III #REF!
Completed value of Work in Rs.
Date of Commencement of Work:
Date of Actual Completion of Work:
14 Details of person holding the power of Attorney (If different from contact person)
Name Related Document to be Uploaded to eProcurement Portal
Mobile No. Pls Enter Details for Person holding Power of Attorney
Ph. No. with STD code
FAX No. with STD code
15 DECLARATION I
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.
16 DECLARATION II
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN02.pdf
TENDER_DOCUMENT • 2.71 MB
05TBF.pdf
TENDER_DOCUMENT • 3.30 MB
05Amd.pdf
TENDER_DOCUMENT • 0.52 MB
05PQ.pdf
TENDER_DOCUMENT • 0.22 MB
05ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
CivilDrawing.pdf
TENDER_DOCUMENT • 0.46 MB
05PBF.xlsm
TENDER_DOCUMENT • 0.07 MB
05Checklist.pdf
TENDER_DOCUMENT • 0.16 MB
05PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
05Undertalimg.pdf
TENDER_DOCUMENT • 0.55 MB
05PB.pdf
TENDER_DOCUMENT • 0.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .