PROVN OF INFRASTRUCTURE FOR HOT MOCK UP OF MPR AT AF STN PALAM UNDER GE (AF) GURGAON NO.1

Amount

Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150 mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed.

Dismantling of brick work or stone/ boulders masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etac but excluding ashlars facings, dressed stone work and precast concrete articles, complete in all respect as specified and directed by Engineer-in-Charge.

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation, shaft, manholes, etc. not exc. 10 sqm on plan and getting out in soft/ loose soil complete in all respect as specified and directed.

All as per item No 3 here-in-before but for depth exc 1.5 mtr and not exc 3.00 mtr complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming (RFR) in layers not exc 25 cm, complete in all respect complete all as specified and directed.

Removal of excavated soil/ Malwa/ Debris to a distance exc 1.5 KM and not exc 10.00 KM including loading, unloading and stacking etc as per NGT Norms complete all as specified and directed.

M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area, complete in all respect as specified and directed by Engr-in-Charge.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured), complete in all respect as specified and directed by Engr-in-Charge.

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete in all respect as specified and directed by Engr-in-Charge.

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete in all respect as specified and directed by Engr-in-Charge.

M&L for PCC type D-2, 1:4:8 (using 40 mm nominal size crushed and graded stone aggregate) in foundations, filling and mass concret, complete in all respect as specified and directed.

M&L for RCC M-25 (using 20 mm graded aggregates) design mix in foundations, including rafts, footings, foundation beams, plinth beams;bases for columns, etc.; basement slabs under-reamed piles and mass concrete, complete and all as specified and as directed by Engr-in charge.

M&L for RCC M-25 (using 20 mm graded aggregates) design mix in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses, complete and all as specified and as directed by Engr-in charge.

M&L for RCC M-25 (20 mm grades aggreages) design mix in columns, pillars, piers, psts and struts, complete and all as specified and as directed by Engr-in charge.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in rough finished flat surface of concrete complete in all respect as specifified and directed.

M & L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, complete in all respect as specifified and directed.

M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished flat surface of concrete complete in all respect as specifified and directed.

M&L for deformed TMT steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete in all respect as specified and directed.

M&L for deformed TMT steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete in all respect as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete in all respect as specified and directed by Engr-in-charge.

M&L for broken stone or boulders hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface.

M&L for 100 mm thick PCC 1:4:8 Type D-2 (using 40 mm graded stone aggregate) as sub-floor etc., including rough top surface to receive tiles finish, complete all as specified and as directed.

M&L for 100 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in floor etc., including rough top surface to receive floor finish, complete all as specified and as directed.

Forming Contration (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound Grade "A" complete all as specified and as directed.

M & L for brickwork with subclass `B’ bricks, in straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without extra cement complete all as specified and as directed by Engineer in Charge.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for applying two coat of exterior Acrylic emulsion paint (100% acrylic) of approved colour and shade over a coat of primer and over 1 to 2 mm thick birla putty punning including preparation of new plastered surface complete all as specified and as directed by Engineer-in-charge. (Note:-including necessary scaffolding upto 4th Storey)

M&L for 75 mm thick PCC, type C-2, 1:3:6 (using 40 mm crushed and graded stone aggregate) as in plinth protection and finished surface even and smooth without using extra cement complete in all respect as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular/hollow section, channel or flat sections) including distance pieces, cleats etc. using FE-410W (Grade E-250 quality "A") complete all as specified and directed.

S&F plate girder or single stanchions, built up of one beam or channel section with flange plates, caps bases, splices, agnle brackets cleats and other connection confirming to Fe-410-W (Gde-E-250) quality-A, complete all as specified and directed.

S & F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment using Fe-410W (Grade E-250 quality "A") complete in all respect as specified and directed.

S&F 16 to 20mm dia of neck of MS Bolt screw bolts (purpose made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/ eves gutter covering or of similar type, fixed with self tapping screws including necessary mild steel flats and screws for fixing with framed structure complete all as specified and directed.

M&L for applying two coats synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of new steel/iron surfaces exc 10cm in width or girth all as specified and as directed by Engineer-in-charge.

M&L for PCC 1:3:6, type C2 (using 40 mm graded stone aggregates) as in drain surface channel, benching and rain water drain, complete in all respecte as specified and as directed.

M & L for extra forming fair finished drain or channel any girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc for 300mm girth .complete in all respect as specified and directed.

M&L for PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregates) as in coping including necessary form work, complete in all respect as specified and as directed by Engr-in-charge.

M&L for Rendering 15mm thick in CM 1:4 on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

S&F Precast Cement concrete perforated drain cover of size 900mm x 450mm x 70mm thick surrounded with steel strip 70x2mm Reinforced as per manufacturer's design in Manufactured proccess laid over existing drain, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing 120 watt energy , saving environmental friendly, long life exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural features or retail spaces, including taking out of old unserviceable one, complete all as specified and directed by Engineer-in-Charge.

Material and labour for XLPE insulated armoured heavy duty electric cable with ISI Marked aluminium conductor 1100 volts grade with cross sectional area of the size 10 Sqmm 2 core complete all as specified and directed.

M&L for cable PVC insulated FRLS unsheathed copper conductor cable of size 2.5 Sqmm 2 single core phase and neutral including 2.5 sqmm earth continuty conductor complete all as specified and directed. NOTE : PVC caping/conduit and three run of 2.5 Sqmm PVC wire will be measured separately

Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtrs below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to galvanised iron strips 32 x 6 mm by means of nuts both check nuts and washers made of galvanised iron or steel earth strip protected by galvanised iron pipe 40 mm bore medium grade upto ground level as directed and including concrete pit in PCC ( 1 : 3 : 6) type C1 pre cast RCC cover slab 30 cm x 30 cm x 10 cm thick including reinforcement with 8 mm dia steel deformed bars at the rate of 10 cm both ways with one lifting handle made of 8 mm dia MS bar funnel, wire mesh 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal on coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 5 of MES schedule Pt-I and testing on completion complete all as specified and directed.

Supply and fixing non transparent looping SMC kiosks pole box 2 phase of size 310×210×120 mm made out of engineering plastic one piece moulding siemens gray colour with hold fast including 04 Nos aluminium strips 60 amp of requird size fixed on unbrakable insulator and one no single pole MCB 1 to 3 amp 'C' curve and boz fitted on pole with clamp made out of MS flat size 25x5 mm with nuts and bolts complete all as specified and directed.

Material and labour in replacement for point wiring (concealed) in and including rigid non metallic PVC heavy duty conduit, 19/20 mm dia/suitable size as per site reqmt including cutting chases for conduits, sinking for boxes for concealed conduit wiring with 1.5 sqmm FRLS PVC insulated unsheathed multi stranded copper conductor cable in and including flush type metal boxes modular type suitable for fixing modular switches, sockets, fan regulators etc with brass screw, cup washer and including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as earth wire connected to common earth and earth dolly as per IS specification and as specified for the One light/fan/bell point controlled by one switch.

All as per item No-48 here-in-before but for one 3 pin socket outlet 5 Amps, independent board.

All as per item No-48 here-in-before but for one 3 pin socket outlet 5 Amps,on the same board.

All as per item No-48 here-in-before but for one 3 pin socket outlet, 15 Amps, on the independent board with cables 4.0 Sqmm.

M&L for concealed sub main wiring alongwith earth wire,concealed in walls/ floors or fixed in wall/ceiling, including the cutting of chases and provision of PVC conduit (heavy grade), and making good to surface to match the original surface, with the following sizes of FRLSH PVC insulated unsheathed copper conductor, single core cable in PVC conduit (Heavy grade) of size 2 x 4.0 Sqmm + 1 x 4.0 Sqmm earth wire complete all as specified and directed.

M&L for modular switch 1 way, 6A, 1 module complete all as specified and directed.

M&L for modular switch 1 way, 16A, 1 module complete all as specified and directed.

M&L for socket, modular, 6A-2/3 pin combined, 2 module complete all as specified and directed.

M&L for socket, modular, 6A/16A -2/3 pin combined, 2 module complete all as specified and directed.

M&L for ceiling rose 63.5x23.5 mm 3 terminals, PVC/Polycarbonate, isolated body complete all as specified and directed.

M&L for modular white cover plate with frame, 6 module complete all as specified and directed.

M&L for modular white cover plate with frame, 3 module complete all as specified and directed.

M&L for modular metal flush box, 6 module complete all as specified and directed.

M&L for modular metal flush box, 3 module complete all as specified and directed.

S&Fsheet metal eoclosure for DBs when MCBs to be used single pole neutral 8 way, double door 415 V rating including fixed on pole with necessary clamp on flush in wall complete all as specified and directed.

S&F MCB, islolator , breaking capacity min 10KA,'C' curve 230V, 40 Amps complete all as specified and directed.

S&F MCB, SP, breaking capacity min 10KA,'C' curve 230V, 5 to 32 Amps complete all as specified and directed.

Supply and fixing air termination single pointed aluminium rod 12 mm dia and 300 mm long

Supplying and fixing aluminium strip 25 x 3.15 mm with sadles and fixing screws etc for roof conductors and down conductors above groundcomplete all as specified and directed.

Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex. Head screw complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtrs below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to galvanised iron strips 32 x 6 mm by means of nuts both check nuts and washers made of galvanised iron or steel earth strip protected by galvanised iron pipe 40 mm bore light grade upto ground level as directed and including concrete pit in PCC ( 1 : 3 : 6) type C1 pre cast RCC cover slab 30 cm x 30 cm x 8 cm thick including reinforcement with 8 mm dia steel deformed bars at the rate of 10 cm both ways with one lifting handle made of 8 mm dia MS bar funnel, wire mesh, 20 mm bore galvanised iron pipe medium grade for watering charcoal on coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 5 of MES schedule Pt-I and testing on completion complete all as specified and directed.

Supply and fix steel tubular swaged poles type 410 SP-22 (12 meter long) complete with CI base plate bolts nuts, screws complete confirming to IS 2713 (Part-I,II & III) errecting totally vertical, weldd and reduced section including painting througout internally and externally upto standing depth and remaining portion of pole with two coat of red oxide primer and numbering of pole and final including foundation and coping complete all as specified and directed.

Supply, installation, testing and commissioning of Isolation Transformer, 3 Phase, 50 Hz, indoor type, Copper Wound, Oil cooled, Class of insulation A, metallic body powder coated designed for Input Voltage range 415V,+ - 5% and Output Voltage range 415V, + - 5%, with ratio of 1:1, Vector Group : Dyn 11, Delta - Star with first filling of transformer oil of requisite dielectric strength up to level, efficiency more than 95%, separate neutral bushing shall be brought out for earthing. Potential difference between neutral to earth less than one volt with all standard fittings like, digital temperature meter, lifting hooks one set, Earthing terminals two nos of capcity 30 KVA complete all as specified and directed.

Supply, install commissioning and testing cubical out door feeder LT panel board of suitable size , platform mounted, factory made totally enclosed dust and vermin proof (protection class IP-54, CPRI Approved) double shutter front and back opening with locking arrangement complete supported on angle iron 50 mm x 50 mm x 6 mm thick frame work and 3.15 mm thick CRCA sheet duly painted with powder coated paint to all steel surfaces over outside and inside complete including necessary PCC 1:2:4 foundation and necessary electrical connection of incomming and outgoing cable with necessary lugs complete all as specified and directed. The panel board shall be suitable for 415 volt, 50 Hz, 3 phase, 4 wire system with epoxy type copper bus bar of appropriate size and internal control wiring shall be of insulated multi stranded copper conductor cables :-

Supply, install commissioning and testing cubical out door feeder LT panel board of suitable size , platform mounted, factory made totally enclosed dust and vermin proof (protection class IP-54, CPRI Approved) double shutter front and back opening with locking arrangement complete supported on angle iron 50 mm x 50 mm x 6 mm thick frame work and 3.15 mm thick CRCA sheet duly painted with powder coated paint to all steel surfaces over outside and inside complete including necessary PCC 1:2:4 foundation and necessary electrical connection of incomming and outgoing cable with necessary lugs complete all as specified and directed. The panel board shall be suitable for 415 volt, 50 Hz, 3 phase, 4 wire system with epoxy type copper bus bar of appropriate size and internal control wiring shall be of insulated multi stranded copper conductor cables :-

Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtrs below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to galvanised iron strips 32 x 6 mm by means of nuts both check nuts and washers made of galvanised iron or steel earth strip protected by galvanised iron pipe 40 mm bore light grade upto ground level as directed and including concrete pit in PCC ( 1 : 3 : 6) type C1 pre cast RCC cover slab 30 cm x 30 cm x 8 cm thick including reinforcement with 8 mm dia steel deformed bars at the rate of 10 cm both ways with one lifting handle made of 8 mm dia MS bar funnel, wire mesh, 20 mm bore galvanised iron pipe medium grade for watering charcoal on coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 5 of MES schedule Pt-I and testing on completion complete all as specified and directed.

Supply, laying, testing and commissioning LT UG armoured, XLPE insulated, inner and outer sheathed, PVC insulated with multi stranded aluminium conductor cable of cross sectional area 95 Sqmm x 3.5 Core, 1100 volts grade, ISI marked with IS-7098, laid in trenches/floor/duct/wall including aluminium lugs of suitable sizes complete all as specified and as directed.

Supply, laying, jointing and testing in replacement of HT XLPE insulated ,screened,PVC bedded galvanised steel strip or wire armoured ,electric power cables(heavy duty) with aluminium conductor,11000 volts(earthed) , grade cross sectional area 150 sqmm 3 core for working voltage upto 11000 Volts, including cable lugs for providing connections as in repair complete all as specified and as directed.

Boring of holes under road, pavement, hard standing for more than 5 mtr in length by trenchless, technology using ultra sound technique and necessary machine, including HDPE pipe of 80 mm dia suitable for 0.4 mpa working pressure.

M&L for cutting the existing bitumen us road/payment/footpath upto 0.75 mtr in depth, 0.45 mtr in width and getting out excavated material and making good the damaged portion after laying the pipe, returning filling in mass concrete PCC 1:2:4 type B2 upto top of the road all as directed by Engr-in-Charge. Note :-M&L for laying of pipe shall be measured and paid separately.

M & L for chemical earthing complete with copper plate earth electrode 20mm dia and 03 mtr long thick buried directly in ground (earth pit not less than 4.00 mtr below ground level with top edge of plate not less than 3.25 mtr below ground level) brazed with copper strip 50x6 mm size 7.5 mtr long and connected to copper strip of any size by means of copper bolts, nuts, check nuts and washers complete all as specified and directed. Note:- The rated quoted is deemed to the inclusive of the followings:- (a) The excavation and earth work (filling in, ramming in layers, watering etc as directed) in any type of soil for earth pit (pit size 1.20x 1.20x4.0mtr). (b) Perforated GI tubing (ISI marked) light grade 80mm bore 7.0 mtr long for strip protection and watering. (c) Common salt charcoal dust in alternative layers of 15cm, up to 90cm above the top of copper plate and one layers of 15cm Magnesium sulphate (MgSo4) all as directed (Salt - 500Kg, Charcoal dust - 1000 Kg & MgSo4 - 150 Kg). (d) Earth chamber of internal size 600mmx600mmx600mm, built in PCC (1:3:6) type C2 bed 15cm thick at bottom, brick work in CM 1:6 upto 45cm over PCC bed and PCC (1:3:6) type C1 coping 15cm above, embedded with MS angle 50mmx50mmx3mm frame work duly painted with anti corrosive bituminous paint, with and including RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with XPM (weight not less than 4Kg per Sqm) having lifting arrangement duly painted in green and making earth pit as directed. (e) On testing, after completion, if the earth resistance < 2 ohms is not obtained, earthing will be regenerated at no extra cost till the desired earth resistance is obtained. (f) GI tubing, bib tap etc for provisioning of continuous water supply at earthing pit will be measured and paid seperately under respective schedule of the contract.

M& L for test point terminal block made out of gun metal or phosphorous bronze of size 75x75x25 mm drilled & screwed including 3 hole,8mm dia 25mm long hexagonal head with nuts & washers complete as specified and directed.

M & L in replacement of testing point box of size 100 x 100 x 50 mm depth as per sample complete all as specified.

Supply and fix in replacement of Copper Strip of size 50 X 6mm buried/laid in trenches/fixed on wall/tower etc complete all as specified.

S&F in replacement of 15 mm bore GI tubing, medium grade ISI marked galvanized with all fitting and laid in trenches complete all as specified and directed.

S&F in replacement gun-metal, globe or gate valves, with iron wheel head, screwed both ends to iron pipe and fixed to 15 mm bore pipe complete all as specified and directed.

M & L for copper brazing with copper strip/copper rod complete all as specified and directed.

Supply & Fix in replacement of PVC insulator supporter with nut bolts / screws for fixing of copper / aluminium strips / GI strips on walls/PCC blocks etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregates for filling in road cuts/hard standing etc complete all as specified and directed.

Removing excavated material soil n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point all as directed.

Supply and laying reinforced precast concrete cable cover, class HV,type 1,flat ,size 300 mm X 180mm X 40 mm of approved make complete all as specified and as directed.

M&L for sand filling in trenches for cushioning to the full width of trenches for protecion of cable including spreading and ramming down complete all as specified and directed. Note:- Thickness of sand coushioing of shall be thickness after punning down.

Material and labour for fly ash/burnt Bricks, sub class 'B' dry, well brunt bricks laid in trenches for cable protection complete all as specified and directed.

Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm ISI marked complete all as specified and directed.

Schedule of Credit

Sumit Enterprises (BID ID -3263701)