ADDN ALTN UPGRADATION OF EXISTING OTM ACCN WITH

Amount

(A) BUILDING WORK Dismantling of asbestos cement (corrugated or semi corrugated etc) sheet in roof covering including ridge complete all as specified and directed

Dismentling timber framed scantling 40 sq cm and over in section, framed in any position complete all as specified and directed.

S&F Pre - painted galvalume aluminum zink coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed.

S&F Pre - painted galvalume aluminum zink coating GI based plain steel sheeting 0.50 mm thick for ridge/ vally gutter of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc.complete all as specified and directed.

M & L for 15mm thick plaster in C.M. 1:6 on other than fair surfaces of walls finished even and smooth without using extra cement complete all as specified and directed.

M & L for 5mm thick rendering in C.M. 1:3 on fair surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed.

M & L for 15 mm thick rendering in C.M 1:4 on other than fair surfaces of wall finished even or smooth without using extra cement by mixing of WPC as per manufacture's instruction all as specified (WPC shall be measured and paid in separately) complete all as specified and directed.

Supply only integral water proofing compound .

Removing building materials etc. (other than spoil ) to a distance of exc 1km but not exc 5km , including loading, unloading and stacking at the destination complete all as specified and directed.

M & L for preparation of surface and applying three coats of white wash on newly plastered surface of wall complete all as specified and directed..

M &L for prepration of new surfaces and applying two coats of oil bound distemper over one coat of putty and one coat of primer on walls complete all as specified and directed.

M & L for preparation of new plastered /concrete surfaces of Ceiling and applying three coats of White wash complete all as specified and directed.

Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed

Taking down existing treatment any type/any thickness on roof including taking down/removing the backing bed concrete if any and disposed off at a distance exc 100m complete all as specified and directed

M&L for brushing neat cement slurry with 3.0 Kg./Sqm over roof slab complete all as specified and directed

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in filling/roof padding or Krebs on roof or chamfered on edge including trawling slightly complete all as specified and directed.

Supply only water proofing compound (PIDIPROOF LW of M/s Pidilite Industries or STP No 1 (liquid) of M/s STP Ltd complete all as spesified and directed.

M & L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- (a) 10 mm thick plastering in CM (1:3) using coarse sand on roof / parapet walls with WPC @ 3 % by weight of cement. (b) Applying a coat of bitumenous primer confirming to IS-3384-1986 @ 0.40 ltrs/Sqm on prepared surfaces and allow to dry. (c) Supply and laying of 3mm thick (Minimum) polymeric water proofing membrane weighing not less than 3 Kgs/Sqm. (d) applying two coat of bituminous aluminium paint, complete all as specified and directed. Note : (i) The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates. (ii) Water proofing compound shall be measured and paid seperatly .

Dismantling framed trusses of span exc 10m but n exc 15 mtr including unbolting, dismantling framed work into two or more portable parts and marking members for re-errection complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for including unbolting, dismantling framed work into two or more portable parts and marking members for re-errection complete all as specified and directed.

Fabrication, Erection and fixing only rolled mild steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.Note : Steel obtained from item No 21 Shall be used.

S&F rolled mild steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F MS Screw bolts 12mm dia (Machine Made ) with hexagonal or square heads at one end and screwedat the other end or screwed both ends,each screwed end to be fitted with washers and one ehexagonal or square nut, diameter of shank 11 to 15 mm, length of bolt not exc 5 cm long complete all as specified and directed.

Dismantling floor, hearth wall tiling/stone cladding including cement mortar bedding (but not backing)/ cement plaster including rubbish off the premises complete all as specified and directed.

M&L for 20-25 mm thick machine cut kota stone slab flooring with 100 mm wide marble border over 20 mm thick screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror finish over and including 25 mm thich PCC sub base type B0, 12.5 mm graded stone aggregate complete all as specified and directed

M&L for 20-25 mm thick machine cut kota stone as in skirting/riser etc. with 15 mm thick rendering in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L for non-skid jointless ceramic coloured tiles 400x400x 7mm thick in floors etc. with and including 15mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 15mm thick plaster in c.m. 1:4 on other than fair surfaces of walls finished even and smooth with neeru finish using extra cement over plastered surface complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450x300x7mm thick including 10mm thick screed bed in CM 1:3 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and drected

M&L for glazed ceramic coloured tiles of size 300x600x 7mm thick including 10mm thick screed bed in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and drected

M & L vitrified ceramic tiles light shade 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick rendering in CM 1:4 complete all as specified and directed.

All as per item No 32 above but on vertical surface.

M&L for second class hard-wood clean sawn timber framed and fixed in scantlings complete all as specified and directed

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars , etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.

M & L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed.

Description all as per item No 36 above but except bricks

M&L fly ash Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connections, including removal from site complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections, including cremoval from site complete all as specified and directed.

S&F 15mm dia tubes medium grade galvanised, with and including all GI fittings(ISI) marked and fixed complete to walls and ceilings or laid in floors complete all as specified and directed

S&F 20 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed

S&F rotational moulded polyethylene water storage tank of capacity 500 Litre, three layer construction, white colour, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings including dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc. and removing from site complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank of capacity 1000 Litre, three layer construction, white colour, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings including dismantling PVC water tanks and removing for capacity exceeding 500 litres & not exceeding 1000 litres etc. and removing from site complete all as specified and as directed.

S&F 20 mm dia brass gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F 20 mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S & F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed

S & F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed

S & F 110 mm bore PVC (SWR) junction single T, equal or unequal complete all as specified and directed

S & F110 mm bore PVC (SWR) vent cowl complete all as specified and directed

S & F PVC (SWR) floor trap, plain with grat-ing including joint-ing with solvent cement ( Diameter of outlet 75mm) complete all as specified and directed.

S & F in repair Long body Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle sc-rewed down screwed for iron pipe or for brass ferrule and fixed (15mm bore dia of pipe ) complete all as specified and directed.

S&F Vitreous China wash hand basin of size 550x400mm with and including MS brackets complete all as specified and directed.

S & F in repair pillar taps cast copper alloy with capstan heads chromium plated screwed down hidh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed (15mm Bore dia of pipe ) complete all as specified and directed.

S&F in repair 15mm dia C P stop valve/angle cock chromium plated with curtch or butterfly handle screwed down, screwed for iron pipe of brass ferrule and fixed in repair complete all as specified and directed.

All as per item no 59 above but concealed type for shower complete all as specified.

S&F brass chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed ( 32mm) complete all as specified and directed.

S&F Vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed

S&F in water closet (Orissa pattern) vitreous china 580X440mm,white with integral foot rests with and including setting / bedding to 'P' or 'S' trap pan in lime concrete,flushing pipe of steel tube or polythene including jointing of socket of flushing rim & connecting pipe to union of flushing cistern,inlet/over flow etc including all subsidary materials required for proper fixing of applainces & fittings etc complete for its smooth functioningcomplete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, seat cover and flush pipe 'P' or 'S' trap, including connection to trap and flushing pipe, EWC pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of capacity 10 litre ISI marked complete all as specified and directed.

S&F in repair PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed

S&F in repairs PVC(SWR) 75 mm bore floor trap plan with grating including jointing with solvant cement complete all as specified and directed.

S&F in repair CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes incl bedding in cement mortor to dwarf wall or cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160mm complete , all as specified and directed.

M&L for RCC 1:1½ :3 type A1 (using 20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors roofs, landing, balconies canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed.

M&L for 18 to 20 mm thick granite ( of any type ) work (table rubbed and polished) in steps, jambs, pillars window cills, cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down Chowkhats or frames not exc 1.5 sq. m each with shutters from the frames and removing from site complete all as specified and directed.

Taking downChowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters from the frames and removing from site complete all as specified and directed.

Taking down Shutter area not exc1 sqm each and removing from site complete all as specified and directed.

Taking down Shutter area exc. 1 sqm and not exc . 2 sqm each and removing from site complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed

S & F factory made 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F factory made 35 mm thick II nd class hard wood glazed and skeleton door shutters open rebated and prepared to receive glass, gauze etc divided in square with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, all as specified in SSR Part-I section 8. clause 8.24 (a) fitted to chowkhat complete all as specified and directed

S&F to chowhkats factory made 30mm thick glazed and skeleton shutters of IInd class hard wood for windows, ventilator , open rebated and prepared to receive glass,gauze, etc.with sash bars, edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters for windows, ventilator etc are provied with stiles and rails as specified in SSR Part I, Section 8, clause 8.24 (b).complete all as specified and directed

S & F 100 mm size butt hinges, medium weight, stainless steel, and fixed complete all as specified and directed.

S & F 75 mm size butt hinges, medium weight, stainless steel, and fixed complete all as specified and directed.

S&F hold fasts; supports or stays for rainwater, knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed

M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed

S&F 300 mm long Aluminum alloy, anodised sliding door bolts, plate type, ,and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminum alloy complete all as specified and directed

S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

All as per item No 88 above but 150 mm size

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

All as per item No 90 above but 125 mm size

S&F PVC coated 25mm dia anodized aluminium alloy pipe as in curtain rods including brackets and fancy type end knobs, complete, all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed

S&F : powder coated aluminium door with frame of size 100X44.5X 1.5mm, style, middle and top rails of size 82X44.5X1.5mm thick and bottom rail of size 114X44.5X1.5mm thick including 5.5mm thick tinted glass panes with all fittings/ fixtures such as cleats, tower bolt, hinges, locking arrangement, pull and push handle of aluminium anodized, hydraulic door closer etc., complete including aluminium and rubber beading all as specified and directed.

S & F powder coated Aluminum glazed window with 3.8 mm thick plain / tinted glass consisting of frame of size 63.5 x 44mm and shutter sections weighing not less than 0.55 kg/m with locking arrangement as approved fixed including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 Nos). hinges type B-21, 100mm long (2 Nos) suitable handle (1 Nos), tower bolt 150 mm long (02 Nos) including powder coated aluminum grills of aperture 75 mm and fixed in frame of window with stainless steel wiremesh including necessary fixing arrangement complete all as specified and directed

S &F : powder coated aluminium partition wall with 5.50mm thick glass and/or 12mm thick prelaminated particle board exterior grade decorated both side and 38mmx63mm size anodised aluminium section frame work fixed with aluminium and rubber beading and fixing arrangement for fixing the framework to wall/floor and frame to frame complete all as specified and directed

Taking down and refixing in same opening of aluminum door shutter of area exc 1.00 sqm but n exc 2.00 sqm including necessary repair with replacement of rubber beading, and other small articles such as cleats, hinges, screws etc complete all as specified and directed

S&F in repair Double action floor spring hydraulically regulated made up of aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed

S&F in repairs Aluminum (Die cast body) hydraulic door closer regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg complete all as specified and directed.

S&F MS work for chimney bars, bearing bars, window guard bars, plain, let in and fixed independently in wooden frames, and similar articles including making holes in chowkats or welding in iron frame etc complete all as specified and directed

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer on new steel Surfaces of any description, over 10cm in width orgirth,not otherwise described including preparation of surfaces complete all as specified and directed

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed

S&F 3 mm thick Sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and directed

Demolition of cement Concrete in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection with expansion joints 30x10 mm filled with mixture of hot bitumen and sand (Bays n.exc 1.50 M) complete all as specified and directed

Dismentling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F false ceiling with 4mm thick E-Board white pre laminated set embosed reinforced designer ceiling board of oceanic texture fixed with GI embosed grid frame work of size not more than 600mmx600mm having 24mm wide T-section, runner made of 0.33mm GI sheets and angle made of 0.45mm GI sheet suspended with 4 mm dia GI wire and leveling clips with and including two coats of oil bound distemper complete all as specified and directed )Note: all exposed surface of grid work shall be powder coated white after taking down old ceiling complete all as specified and directed.)

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed

M&L for cement concrete type B-1 (1:2:4) as in cills, steps; Seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for RCC 1:1½ :3 type A1(using 20 mm graded stone aggregate) as in Column, pillars, piers, posts and struts etc complete all as specified and directed

Description all as per item No 113 but as in Roof beam, bands, lintel beam, etc complete all as specified and directed

Use and waste of formwork to sides of concrete of pillars, posts, struts, piers, columns etc complete all as specified and directed

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over as in reinforcement cut to length, bent in shape required including cranking, bending, spirally hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips Complete all as specified and directed

All as per item No 117 above but mild steel TMT bar 6 mm to 8 mm dia.

All as per item No 117 but 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed.

Demolition of reinforced cement Concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (below or above ground level) complete all as specified and directed

Cutting chases pining in brick,concrete walls built in cement mortar or cement lime mortar making good to facings where required and pointing in cement mortor 1:3 to ends or edges of shelves lintels etc and cutting chases for concealed water tubing cutting not exc 10 cm girth all as spcefied and directed

M & L for preparing old steel and iron surface of any description not otherwise descirbed over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparing old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc and applying one coat of colour wash on walls complete all as specified and directed.

M&L for preparation of old decorated plastered surface of walls cornices, pilasters etc by brooming down scraping, and applying two coat of weather proof exterior emulsion paint of approved shade/tint on walls complete all as specified and directed

M & L for preparation of old decorated surface of walls, cornices, pilasters etc by washing rubbing down and stopping old distempered and painted surfaces and applying one coat of oil bound distemper on walls, cornice, pilasters etc complete all as specified and directed.

All as per item No. 126 above but applying two coats coat of oil bound distemper (OBD) on wall surfaces.

M&L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, and applying one coat of cement base paint on walls tinted or white including complete all as specified and directed

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other mean and applying three coat of white wash on walls complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of primer over a coat of Birla white wall putty after complete removal of existing treatment on old plastered surface including necessary preparation complete all as specified and directed

Surface excavation soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soil complete all as specified and directed

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 M in depth and getting out in soft/loose soil complete all as specified and directed

Removing of excavated materials to a distance n exc. 50m and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed

Earth filling under floor, including spreading, leveling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed. Note : Earth obtaind from excavation under item No 133 shall be used

M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling, etc complete all as specified and directed

M&L for RCC 1:1½ :3 type A1(using 20 mm graded stone aggregate) as in foundations, footings, plinth beams; bases for columns, etc.complete all as specified and directed

M & L for RCC 1:1½ :3 type A1 (using 20 mm graded stone aggregate) as in Chajja etc all as specified and directed.

Use and waste of formwork to sides of concrete in foundations, footings, bases of columns, sides and soffits (if any) plinth beams, and similar work complete all as specified and directed

Use and waste of Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed

Use and waste of formwork to edges of concrete flats, roofs and sides of RCC/ PCC bands in walls, and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

All as per item No 142 but exc 5 cm but n exc 10cm wide complete all as specified

M & L PCC 1:2:4, type B-0, with 12.5mm stone aggregate 40 mm thick in Damp Proof Course to horizontal or vertical surfaces including necessary formwork with and including water proofing compound as per manufacture's instruction complete all as specified and directed.

M&L for plastering 15 mm thick in CM 1:4 on fair faces of brick or concrete surfaces, finished the surface even and smooth with using WPC @ 2% by weight of cement (Note- WPC shall be measured and paid separately) complete all as specified and directed.

M&L for 10mm thick cement plaster on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth complete all as specified and directed

M & L rendering 5mm thick in CM 1:3 as in ceiling ,soffits of slab and finish the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for factory made moulded door shutter consisting of solid core single leaf flush door of 30mm thickness lipped with 15mm(5mmx3mm) thick x30mm width on one stiles and top rails & 10mm (5mmx2)thick x30mm width on the other stiles and bottom rails. the inner panel laminated with 2mm thick termite proof, water proof and fire resistance moulded PVC sheet with2, 4, 6 raised panel design in different prelam colours on one side after routing the moulded design on flush door & 2 mm prelaminated PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the PVC lipping etc complete as per direction of Engr-in- charge & manufacturer's specification.

M&L for 100mm thick PCC 1:5:10 type E-2 using 40mm graded stone aggregates as in sub base of floors complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates as in base of floors, finished the surface even and rough complete all as specified and directed.

M&L for hard core broken stone of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, water and rammed to a true surface complete all as specified and directed.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over one coat of Primer on wall complete all as specified and directed

S & F 32 mm bore Low density polyethylene pipes for Wash hand basin etc complete all as specified and directed.

S & F Long body Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle sc-rewed down screwed for iron pipe or for brass ferrule and fixed (15mm bore dia of pipe ) complete all as specified and directed.

S&F hand shower (Health faucet) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality complete all as specified and directed.

S&F CP Brass toilet paper holder of superior quality complete all as specified and directed.

S&F CP Brass Jet spray with hand hold arrangement incl 1.5 m long flexible pipe with hook of superior quality complete all as specified and directed.

S&F CP Grating doom of 125 mm dia complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube incl 75mm long MS screws for fixing to walls all as per specified in SSR. complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel’ having a PVC sheet strip’ of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the fame at site as per specification & drawing. complete all as specified and directed.

M&L for precast cement concrete type B-1 , 1:2:4(using 20mm graded aggregate), as in kerb stones etc and set in cm 1:4 complete all as directed and specified.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed .

M&L for PCC 1:4:8 type D-2, using 40mm graded stone aggregate as in bed of drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150mm dia of pipe complete all as specified and directed

M&L for 150 mm dia salt glzed stoneware drain pipes grade ‘A’ laid in trenches and jointed in cm 1:1 complete all as specified and directed.

M&L for providing pre-cast RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for man holes and drains) including necessary form work set in CM 1:4 complete all as specified and directed.(Note :- Reinforcement shall be measured and paid separately)

Provn of Septic tank for 10 users including necessary earth work complete all as specified ,directed and shown on Standared Drawing No TD/217, Sheet 1/2 & 2/2

Provn of Soak well 1.80 meter dia and 3.0 meter depth including necessary earth work complete all as specified ,directed and shown on Standared Drawing No TD/576, Sheet 1/2 & 2/2

M&L for rendering 15 mm thick in CM (1:4) on fair faces of bricks wall or concrete surfaces and finished even and smooth complete all as sepcified and directed.

Rolling consolidation formation surface in cutting using power roller of capacity exceeding 8 tonne not exceeding 12 tonne complete all as specified and directed .

Soling (or sub base) 150mm (Spread thickness) with broken boulder or quarried stone, interstices filled surface formed and rolled and consolidated to required gradient and cambercomplete all as specified and directed .

M&L for Water bound macdam (WBM) 150 thick (compacted thickness) in 2 layers each layer 75mm thick with coarse aggregate of granite, trap or basalt of grading 2 (63 to 40mm size) or of grading 3(50 to 20mm size), spread rolled and consolidated using 8 to 10 tonne capacity vibrator roller to required gradient and camber complete all as specified and directed .

M&L for preparing WBM surface by brushing with brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, and applying evenly priming tack coat with paving Bitumen VG-10 grade over the prepared surface by mechanical sprayer @ 10 kgs/10 Sqm of surface area complete all as specified and directed.

M&L premix bituminous macadem laid using 40mm well graded crushed stone , rolled and compacted to required gradient and camber consolidated thickness not exceeding 75 mm with 4% binder of paving Bitumen VG-30 grade , content by weight of total mix, mixed in hot mix plant and laid by mechanical paver finisher , rolled compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient complete all as specified and directed.

M&L for applying bituminous premixed semi dense asphaltic concrete 40 mm thick (consolidated thickness) with 5.50% binder of paving Bitumen VG-30 grade, content by weight of total mix including cement filler, on surfaces, rolled compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechnaical paver finisher complete all as specified and directed. NOTE:-(i) The actual binder content used shall be as per optimised content based on approved job mix formula irrespective of what ever indicated in Sch 'A'. (ii) Price adjustment shall be done on MINUS side only @ Rs. 45,000/- per MT (without considering the permissible tolerance on minus side) with reference to binder content indicated in Sch 'A'. (iii) No Price adjustment for Bitumen shall be done for variation on plus side. (iv) Please note that SDAC to be laid immediately after laying of BM. In case the SDAC could not be laid within 48 hours of laying of BM, primer coat @ 3Kg / 10Sqm to applied over freshly prepared bituminous surface and nothing extra shall be paid by the Govt. on this account. No claim what so ever shall be entertained by Govt on this account.

M&L continuous brick edging with fly ash bricks with width equal to the width of the brick; laid dry on end vertically complete all as specified and directed

M&L for laying 2.5mm thick hot applied thermo plastic road marking painting uniform thickness with glass beads as per clause No 803 of MOST specification including cleaning of road surface heating of material within specified temperature limit for marking with necessary arrangement complete all as specified and directed.

M&L for 100 mm thick plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate)as in sub base complete all as spciified and directed

M&L for Machine pressed precast concrete interlocking paver block coloured rubber moulded any shape and size conforming to IS 15658-2006 of 60mm thickness,M-35 grade approved design /colour set and bedded over and including 25mm thick coarse sand laid over compacted sub soil all as specified and directed.

S & F of 'Cat Eye' in size of width n.exc 130mm and hight n.exc 20mm made of strong engineering high impact resistant polymer with electronic welded lenses for retor reflective in dry and wet weather condition along with bituminous adhesive complete all as specified and directed.

Supply and fixing of speed bumps/breaker made of heavy duty tough rubbrer of size 350mmx25mmx53mm and weight 1.2 kg approx coloured black and yellow brand dark eye modle No 1005 complete all as specified and directed.

Supply and fixing M.S pipe having 75mm dia O.D, thickness 1.4mm x 1200mm length,duly powder coated in black/white colour.it has embedded in PCC 1:3:6 Type C2(using 20mm graded stone aggregate)with 3 nos x75mm high intensity prismetic(HIP) reflective tapes and MS pipe having powder coated jali andmesh for reflector portion and for anti theft.Below the reflective band of red/yellow/white colour high intensity micro prismetic type - IV tape(As per IRC 67/2010) of 75 mm each shall be provided with and including neccessary earth work complete all as specified and directed.

S & F Retro Reflective signage made 600mmx900mm and 2 mm thick aluminuim sheet face to be fully covered with high intensity prismetic(HIP) Retro Reflective sheeting confirming to ASTMD-4956 01 as per colour required and letters, symbosis shall be made of same Retro Reflective sheeting shall be duly processed on base aluminum substrate board to be supplied along with back supported angle iron frame minimum 25x25x3mm all roundand mounted on 75mmx75mmx6mm angle and this angle firmely embeded 0.60m below ground level in PCC 1:3:6ype C2(using 20mm graded stone aggregate)and duly painted one or two coats of synthetic enameled paint alongwith fixing accessories complete as per MORT & H specification in repairs complete all as specified and directed

Excavation in post hole (or similar hole) each n exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm etc and getting out soft/ loose soil complete all as specified and directed

Removing of excavated materials to a distance 1.5km and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed

M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in foundations filling and mass concrete filling, etc complete all as specified and directed

S&F for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

M&L for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provn of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed. (Note : Each line wire to be measured.)

M&L for preparation of newly steel surfaces of any description and treating ends of posts and treating with tar or coaltar black paint area exc 0.10 sqm but n exc 0.50 sqm each complete all as specified and directed

S&F Mild steel screw bolts (machine made) diameter of neck 5 to 10 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed

Supply only Chain Link MS galvanized fencing of 4.00 mm dia of wire and 75 mm aperature complete all as specified and directed

Fixing Only Chain Link fencing including line wires, any mess, size and type to any type of standards, rails, straining bolts, etc including provision of binding wires, complete all as specified and directed

S&F Concertina coil 600mm dia (at stretched position), made out of hot dipped, galvanised steel wire coated with CLR anti corrosive paint, making diamond shape barbs with 18 SWG sheet, weight of each coil should not be less than 9.50 Kg, each coil should have 15 rounds and should covers 6 RM length, fixed over barbed wire at points wherever coil touches the bottom of barbed wire with the help of hog rings (14 SWG) and in between Y shaped angle iron post complete all as specified and directed. NOTE: (i) Hogging shall be fixed at a interval of 600mm centre to centre, wherever it touches with the Barbed wire wire. (ii) Overlapping of concertina coil and barbed wire shall be 300mm. (iii) Barbed wire and Y shaped angle iron post shall be measured and paid separately under respective items.

M&L for brick work with fly ash using old size with sub class ‘B’ bricks straight or curved on plan exceeding 6 M mean radius, using old sise bricks built in CM 1:4 complete all as specified and directed

M&L for plastering 15 mm thick in CM 1:4 on fair/other than fair faces of brick or concrete surfaces, finished the surface even and fair with using extra cement complete all as specified and directed

M&L for mild steel Framed structural work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of Fe-410-0 (Gde-E-250)complete all as specified and directed

(B) ELECTRIFICATION WORK Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down DBs any type and size including MCBs removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc.complete all as specified and directed.

M&L for point wiring (concealed type) complete with FRLSH PVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm( 22/0.30 or 30/0.25), 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly in and including cutting/chasing on brick wall not exc. 10 cm girth (excluding ceiling surface) and S& Fixing PVC conduit pipe medium grade of nominal size 20 mm dia along with connected fittings/junction boxes using new MS sunken terminal boxes of thickness not less 1.22 mm, new 3 mm thick laminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed surface with cement mortar ratio of 1:3 and treated surface with existing white/colour wash/distemper etc to match with existing surface complete all as specified and directed and suitable for the following: - (i) One light point or one fan point controlled by one, 1- way switch

All as per srl item No 198 above but one 3 pin socket outlet, 05 Amps, independent with cable 1.5 Sq mm size.

All as per srl item No 198 above but one 3 pin socket outlet 05 Apms point on the same board with other switches with cable 1.5 Sq mm size.

All as per srl item No 198 above but one 3 pin socket outlet, 15 Amps, independent with cable 2.5 Sq mm size.

Supply and fixing switch piano flush type (broad type) , single pole, one way, 05 Amps complete all as specified & directed.

Supply and fixing socket outlet 2 in 1, 3 pin, 05 Amps complete all as specified & directed.

Supply and fixing switch socket combination 2 in 1, 3 pin, 05 and 15 Amps, flush type, universal complete all as specified & directed.

Supply and fixing stepped type, electronic fan regulator, flush and socket type on the existing phenolic laminated sheet etc as required complete all as specified & directed.

Supply and fixing lamp holder, PVC / Polycarbonate type with back plate With lamp 9 w suitable for batten fittings complete all as specified & directed.

Supply and fixing LED light fitting 1 x 11 / 15 Watt 230 Volt decorative wall mounting type with multicolour ABS housing with polycarbonate rings and glass shade with lamp holder, connector block, etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed

Supply and fixing in replacement of recessed mounted 2'x2' LED ceiling light fitting 35 watt, 6500K, with IP 20 protection comprises of CRCA housing, high efficiency diffuser cover, electronic driver, etc and all accessories pre-wired including connecting up complete all as specified and directed.

Supply and fixing in replacement of LED security light fitting 45 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade GI tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.

Supply and fixing ceiling rose, 3 phase / PVC / polycarbonate, isolated body complete all as specified directed.

M&L for replacement of sub main wiring with 2 x 6.0 Sqmm + 1 x 6.0 Sqmm earth wire , FRLSH PVC insulated unsheathed flexible copper conductor (Multistrands), single core , 1100 Volts grade along with FRLSH PVC insulated unsheathed flexible copper conductor (Multistrands) in green colour as continuous earth wire conforming to IS 694 with latest amendments and ISI marked, drawing in concealed PVC conduit and making incoming / outgoing electric connections by using required size copper lugs / thimbles, making good to disturbed surface to match with existing including removal of existing old complete in all respect complete all as specified and directed. NOTE :- (i) Two run of single core FRLS PVC cable with one run of earth conductor and conduit shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in CM (1:3) including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs).

M&L for replacement of sub main wiring with 2 x 4.0 Sqmm + 1 x 4.0 Sqmm earth wire , FRLSH PVC insulated unsheathed flexible copper conductor (Multistrands), single core , 1100 Volts grade along with FRLSH PVC insulated unsheathed flexible copper conductor (Multistrands) in green colour as continuous earth wire conforming to IS 694 with latest amendments and ISI marked, drawing in concealed PVC conduit and making incoming / outgoing electric connections by using required size copper lugs / thimbles, making good to disturbed surface to match with existing including removal of existing old complete in all respect complete all as specified and directed. NOTE :- (i) Two run of single core FRLS PVC cable with one run of earth conductor and conduit shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in CM (1:3) including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs).

Supply and fixing sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 12 Way with 200Amp rated bus bar , double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar confirming to IS 13032 & 8623 complete all as specified and directed.

Supply and fix sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 8 Way with 200Amp rated bus bar , double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar confirming to IS 13032 & 8623 complete all as specified and directed.

Supply and fix sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 4 Way with 200Amp rated bus bar , double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar confirming to IS 13032 & 8623 complete all as specified and directed.

Supply and fix sheet metal enclosure distribution board, triple pole and neutral, AC, 415 Volt, 04 way with 200 Amps rated bus bar and double door complete all as specified directed and comprising of the following :- (a) MCCB, 100 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete - 01 No.. (b) MCB, SP, AC, 240 volts of 06 to 32 Amps capacity complete - 12 Nos.

S& F MCB SP, 06 to 32 Amps 240 volts, 'C' Series, ISI marked and conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.

S& F MCB DP, 32 Amps 240 volts, 'C' Series, ISI marked and conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades to sore including painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified & directed.

Cutting walls of any type, making holes for fixing of exhaust fans any size or sweep and making good to the surface with fine plastering, finishing and colouring with existing clour matching complete all as specified and directed.

Supply and fix exhaust fans single phase 230/240 Volts heavy duty metalicbody of size 380 mm sweep 1400 RPM ISI marked with louvers and making connection with twisted copper flexibelwire 23/0.076 mm all as specified and directed

Supply and fixing of stationery storage type electric BEE 5 star rated hot water geyser of capacity 50 litre to operate on 230 volt AC, vertical type, white in colour, working pressure min 0.8 Mpa with glass lined coated tank, magnesium anode, adjustable thermostat, enamel coated incology heating element 2 KW, ABS plastic body including 4 Nos full threaded fastner of size 100 x 10 mm with 2 Nos washer suitable incl 2 Nos 600 mm long PVC hot series connection pipe with rubber washer and plug top 16Amp complete all as specified and directed.

Supply & fixing ceiling fan of size 1200 mm sweep, conforming to IS : 374,6 BEE, 5 Star rated with brushless direct current motor(BLDC) , nominal wattage -50 Watt (± 5 %) , speed - 320 to 380 RPM, Air delivery - 215 to 225 Cu Mtr/Min including accessories complete suitable for operating voltage 230 Volt AC connecting with FR PVC insulated & PVC sheathed round flexible copper conductor wire of size not less than 23/0.0076 in three core of length not more than 0.5 Mtr including taking down the existing old ceiling fan ( antique model ) and depositing the same to E/M store yard complete in all respect as specified and directed.

Supply and fix air circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting all as specified and directed.

Taking down LT UG cable any size removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Supply, laying, testing and commissioning LT underground XLPE insulated, armoured heavy duty electric cable with aluminium stranded conductor, 1100 volt grade conforming to IS-1554 and ISI marked of cross sectional area 70 Sq mm 3.5 core size in trenches, on wall, road crossing through protection pipe etc. complete all as specified and directed.

Supply, laying, testing and commissioning LT underground XLPE insulated, armoured heavy duty electric cable with aluminium stranded conductor, 1100 volt grade conforming to IS-1554 and ISI marked of cross sectional area 50 Sq mm 3.5 core size in trenches, on wall, road crossing through protection pipe etc. complete all as specified and directed.

Supply, laying, testing and commissioning LT underground XLPE insulated, armoured heavy duty electric cable with aluminium stranded conductor, 1100 volt grade conforming to IS-1554 and ISI marked of cross sectional area 25 Sq mm 4 core size in trenches, on wall, road crossing through protection pipe etc. complete all as specified and directed.

S&F 10 Sqmm 2 Core Aluminium unarmoured, flame resistant PVC flat cable, ISI marked all as specified and directed.

M& L for sand cushioning in trenches for protection of under ground cable provided in layers of sand as 8 cm before laying the cable and 15 cm deep after laying cable complete all as specified and directed. Note : Punned thickness shall be measured and paid.

Supply and laying 50 mm bore galvanised steel tubes with all fittings, light grade laid in trenches for cable protection complete all as specified and directed.

Supply and laying sub class 'B' brick old size laid flat in trenches across the length for protection of cable as cable cover complete all as specified and directed .

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality of capacity 2 TR, electric driven, single phase BEE 5 star rated complete all as specified and directed .

M&L for earthing complete with MS Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level including necessary excavation, earth work ,charcoal, salt etc and connected to GI earthing lead wire 4 mm dia by means of GI bolt nuts check nuts washers etc and 20 mm dia GI light grade watering pipe with funnel, wire mesh etc including PCC (1:3:6) type C-1 using 20 mm graded stone aggregate earth pit with 40x40x6 mm mild steel angle iron frame, RCC cover (1:2:4) type B-0, 50 mm thick reinforced with 8 mm dia round bar @100 mm centre to centre both ways with mild steel handle 12 mm dia, plastering 12 mm thick in cement mortar (1:6) internally and upto 150 mm below ground level externally, and GI earth lead wire 4 mm dia and 15 mm dia GI protection pipe medium grade from earth plate to test point upto 7.5m length all as shown in electrical plate No 3 of SSR Part -I 2009 and connected to earth test point including testing complete all as specified & directed.

Supply and fixing voltage stabilizer for low & high voltage correction equipped with electronic transistorized relay suitable for correction on single phase 50 c/s A/C supply complete with voltmeter and designed for input voltage 175 volts ot 250 volts and output voltage 215 volt to 250 volt of capacity 5 KVA complete all as specified & directed.

M/S ALPHA CONSTRUCTIONS

M/s Highway Construction

LUMOS INFRA PVT LTD

MATA DEEN RAM CHANDRA AGARWAL

AMIT ASSOCIATES

M/s VINOD KUMAR SHARMA