PERIODICAL SERVICES, REPAIR TO JOINERY, SANITARY, OTHER MISC WORK AND REPAIR TO REPLACEMENT OF INTERNAL ELECTRIFICATION, LIGHT FITTINGS, CEILING FANS, GEYSER , INVERTORS WITH BATTERIES ALONGWITH CONNECTED ITEMS IN TAPOVAN COMPLEX, RAKSHANAGAR AT DOME

Amount

Taking down cement plaster on brick or stone walls, concrete surfaces etc, including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.

Material and labour for 15mm thick rendering on brick/concrete surfaces on broken edges of chajjas, facia, slab, roof projectioon and any other brick/concrete surface in patch work in CM 1:4 and finishing fair and even without using extra cement with using 2% Integral water proofing compound by weight of cement compete all as specified as directed. Notes : (i) Water proofing compound will be measured and paid separately under relevant item (ii) Quoted rate shall be deemed to include for work up to four storey building & height upto 15 metre including all safety measures, scaffoldings etc., required for carrying out the work

Ditto- as item no 2 above but 20mm thick in two coats

Material and labour for rendering 10mm thick on fair faces on ceiling/Wall with cement mortar 1:3 & finished even and smooth without using extra cement compete all as specified as directed

Supply only integral water proofing compound

Material and labour for Preparation of old surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots,removing nails etc., and applying one coat of white wash on walls including cornices etc.complete all as specified and directed.

Material and labour for preparation of old ceiling surfaces by brooming down and steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and greasy spots etc, and applying one coat of white wash complete all as specified and directed.

Material and labour for new plastered wall surfaces applying two coats of acrylic emulsion (weather coat) over a coat of exterior acrylic primer of approved colour complete all as specified and as directed. Note: - Quoted rate shall be deemed to include for work up to four storey building & height upto 15 metre including all safety measures, scaffoldings etc., required for carrying out the work

Material and labour for complete removal of existing treatment and preparation of surfaces including filling the cracks if any on surfaces of wall and applying two coats of Oil bound distemper over a coat of wall care putty complete all as specified and directed.

Material and labour for 3mm thick putty finish on wall surfaces with wall care putty all as specified and directed

Material and labour for Preparation of old surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots, removing nails etc., and applying one coat of distemper oil emulsion white or tinted on walls including cornices etc. complete all as specified and as directed

Material and labour for preparation of old wall surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots, removing nails etc., bringing surface to level by applying external wall care puty, two coats of exterior acrylic emulsion paint of approved colour over a coat of exterior water based wall primer with and including provision of scaffolding required for the treatment to external surfaces of building with required safety measures etc complete all as specified and directed

Material and labour for preparation of old wall surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots, and applying One coats of exterior Acrylic acrylic emulsion paint of approved colour on walls with and including provision of scaffolding required for the treatment to external surfaces of building with required safety measures etc complete all as specified and directed

Material and labour for preparation of old plastered surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots etc., and applying Two coat of cement paint white or tinted on walls including one coat of primer etc complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots etc., and applying One coat of cement paint white or tinted on walls complete all as specified and as directed.

Material and labour for preparation of old painted wooden surfaces of any description not specifically mentioned otherwise over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description not specifically mentioned otherwise over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description not specifically mentioned otherwise over 10 cm width or girth and applying one coat of aluminium paint all as specified and directed.

Material and labour for preparation of new plastered surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots etc., and applying two coats of plastic emulsion paint on newly plastered/putty finished surfaces including one coat of primer etc complet and directed.

Material and labour for Preparation of old surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots, removing nails etc.,and applying one coat of plastic emulsion paint on old surfaces etc complete all as specified and directed.

Material and labour for repairing toughened glass door including changing SS Plate, taking down the door for repairing replacing floor spring, securing handle and lock and erecting back to position complete all as specified and directed. Note:- floor spring will be measured and paid separately under relevant item

Supply and fixed Double action floor spring hydraulically regulated made ISI marked of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed Make: Dorma/shivalik/royal Note :- Quoted rate shall be deemed to include for all transportation , handling and taxes etc

Supply and fix stainless steel lock for toughened glass but for single and double leaf shutter with triple key etc complete all as specified and directed Make: Godrej/link/Royal

Taking up/down steel tubing 15 mm bore and connections from walls and cellings or laid in floor complete all as specified and as directed.

Taking up/down steel tubing 20 mm bore and connections from walls and cellings or laid in floor complete all as specified and as directed..

Taking up/down steel tubing 25 mm bore and connections from walls and cellings or laid in floor complete all as specified and as directed..

Supply and fix Galvanised Iron tubes 15 mm dia medium grade with all fittings and fixtures such as bends, elbows, tees, short pieces, back nuts, connectors, diminishing pieces, caps, pegs and clamps union etc. laid in wall/floor/ceiling as in concealed work including cutting chases in wall and making good surface complete all as specified and as directed.

Supply and fix Galvanised Iron tubes 20 mm dia medium grade with all fittings and fixtures such as bends, elbows, tees, short pieces, back nuts, connectors, diminishing pieces, caps, pegs and clamps union etc. laid in wall/floor/ceiling as in concealed work including cutting chases in wall and making good surface complete all as specified and as directed.

Supply and fix Galvanised Iron tubes 25 mm dia medium grade with all fittings and fixtures such as bends, elbows, tees, short pieces, back nuts, connectors, diminishing pieces, caps, pegs and clamps union etc. laid in wall/floor/ceiling as in concealed work including cutting chases in wall and making good surface complete all as specified and as directed.

Supply and fix 100mm dia centrifugal spun pipe red in colour single socket in any length with rubber ring joint, fixed to walls /Floor complete all as specified and directed.

supply and fix Cast iron bends of any radious 100mm bore with access door all as specified and directed.

Supply and fixed in repairs 10 litres capacity PVC valveless low level flushing cistern, syphonic action type with inlet, ball valve, float and handle fixed to wall with brackets and screwed including PVC flush pipe and connecting to WC complete all as specified and directed.

Supply and fix in repairs vitreous china wash down water closet pan (Pedastal pattern), EWC of approved colour including necessary connection including seat and cover but excluding flushing cistern complete all as specified and directed.

Material and labour for Servicing of Flushing system 10 litres capacity PVC Valveless symphonic action type flushing cistern low level . Taking down the all materials from existing cistern, Cleaned all dirt and refixing the same with making good and leakage free condition for 1 year, including repalcement of folat valve, Syphone, flush washer and flush handle with all fixing arrengments complete all as specified and directed.

Supply and fix in repairs vitreous china wash down water closet pedestal pattern (EWC) white excluding flushing cistern & Incl white seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe.Complete all as specified and directed.

Supply and fixing Toilet paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. Make : Jaquar, Model : AKP-35753 (P) (Yr-2022) or equivalent model in Zoloto/Leader

Supply and fixing chromium plated connection 15mm size with PTMT nuts, of length600mm Complete all as specified and directed.

Supply and fix in repairs Cast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head ,Complete all as specified and directed Make : Jaquar, Model : FLR-CHR-5053N or equivalent model in Zoloto/Leader

Supply and fix in repair brass cromium plated conceled stop cock of bore size 15 mm, in position conceled in walls/ceilings or floors complete duly making grooves filled with cement mortar in 1:4 finished to match with adjacent surfaces complete all as specified and directed.

Supply and fix in repair Health Faucet with 8 mm dia one meter long flexible tube and wall hook chromium plated, screwed down, for iron pipe or for brass ferrule complete all as specified and directed. Make : Jaquar, Model : ALD-573 or equivalent model in Zoloto/Leader

Supply and fixed in repair 15mm dia 2 way Bib cock cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe complete all as specified and directed. Make : Jaquar, Model : Jaquar FLR 5041N or equivalent model in Zoloto/Leader

Material and labour for Servicing wash basin mixer/ Wall mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut complete all as specified and directed.

Supply and fixed in repair wall mixer cast copper alloy, chromium plated 3 in 1 system with provision for both over head shower and hand shower chromium plated, with wall flange, screwed down, for iron pipe or for brass ferrule complete all as specified and directed. Make : Jaquar, Model : FLR 5273 UPR or equivalent model in Zoloto/Leader

Supply and fixed in repair wash basin mixer cast copper alloy, chromium plated central hole single lever without popup waste system with 450mm long copper pipe and brass nut complete all as specified and directed. Make : Jaquar model No.KUPCHR-35011BPM or equivalent model in Zoloto/Leader

Supply and fixed in repair Mirror with plastic cabinet of size 550mmx400mmx75mm single door complete all as specified and directed.

Supply and fixed in repair Plastic seat cover white closed pattern with flat bottom and cover with CP hinges for EWC complete all as specified and directed.

Supply and fixed in repair 32 mm PVC flexible pipe for waste outlet with threaded socket at one end.complete all as specified and directed.

Supply and fixed in Repairs 40 mm PVC flexible pipe for waste outle with threaded socket at one end.complete all as specified and directed.

Supply and fixed in Repair Brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges complete all as specified and directed.

Supply and fixed in Repair bib taps of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule Including dismanteling and making good the tiles if required Complete all as specified and directed.

Dismantling wall/ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets Complete all as specified and directed.

Supply and fix mineral Fibre acoustical suspended ceiling system with Bevelled/Tegular EDGE TILES with 15mm exposed or inward grid(projected ceiling tile) as approved by GE. The tile should have humidity resistance (RH) of 99%, NRC 0.7 , Light Reflectance > 85%, Thermal Conductivity k= 0.052-0.057 w/m k. Colour white Fire Performance UK Class 0 /Class 1 (BS 476 pt- 6&7) in module size of 600 x 600 x 20 mm suitable for Green Building application, with Recycled content of 54%. The tile shall be laid on GI grid with 15 mm wide T - section flanges colour white having rotary sittching on all T sections i.e. the main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a load carrying capacity of 14 Kgs/M2 & minimum pull out strenght of 100 Kgs. The T section have a Galvanizing of 90 grams per sqm and need to be installed with Suspension system as required on site of any shape and size Complete all as specified and directed. Make: USG / Knauf / Armstrong / Anchor

Material and labour for repairs to aluminium door shutter of any description and size including taking down from frames for realignment and tightening including adjusting the shutter removal and refixing hydraulic or floor door spring , and hinge , refixing shutter in same opening with all necessary repairs /refixing ,including replacement of damaged jointing cleats ,glazing clips , rubber packing ,aluminium beading , screws etc also including provision of 6 mm dia rod through bolt with nut on both side for top and bottom rail. complete all as specified and directed. Note : Hydraulic door closer/ door spring if replaced will be measured and paid separately under relevant items.

Supply only Aluminium extruded section Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Ditto as Item No.53 But Aluminium windows of any type/ mechanicium except of Hydraulic / floor door spring. Wire mesh/ glass shall be paid under separate item above the rates includes replacement of rollers/ sliding arrangement/locking arrengments/ any types of hinges .if during repalcement of wiremesh/ glass window requires dismanteling of complete window with frames and shutters the same shall be carried out and the rates are deemed to be included such provisions under this item and nothing shall be paid extra complete all as specified and directed.

Material and labour for easing of door shutters for easy closing /opening tightning of hinges or changing the position of hinges adjustment of tower bolts , sliding door bolts with new screw etc complete all as specified and directed.

Material and labour for easing of window shutters , kitchen cupboards shutters , show case shutter , drawers including fixing of screws for easy closing /opening tightning of piano hinges or changing the position of hinges adjustment of adjusting of handles, knobs with new screw etc including other small adjustments complete all as specified and directed.

Supply and fixed in repairs floor door stoppers double legged of aluminium alloy body & tounge aluminium anodised alloy with rubber fixed with steel screws on the door frame of size 150 mm long compete all as specified and directed.

Supply and fixed mild steel four levers mortice lock vertical type size 100mm compete all as specified and directed.

Supply and fix 150 mm long Heavy duty stainless steel fancy type sliding bolt of 12mm dia or rectrangular section as approved compete all as specified and directed.

Supply and fix 75 mm MS butt hinges medium weight cold rolled mild steel compete all as specified and directed.

Supply and fixed in repairs GI wire cloth power woven 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for steel window and ventilator including providing MS beads and SS screws or fixed with tinned tracks or wooden beeding patti.to gauge door shutters and wooden windows . Complete all as specified and directed.

Materials and labour for repairs to sunken floor slab with the following specifications:- (a) Demolition of PCC and taking out old brick bat filling and roughening surfaces of old concrete floor and wall by picking, sweeping clean and washing down with water to remove dust etc. (b) PCC 1:2:4,type B-0, using 12.5mm graded stone aggregate averaging 50mm thick as in sunken floor,with proper slope towards GI spout. The dia of GI Spout pipe shall be 50mm Medium grade. The minimum length of Spout shall be 500mm and if any spout comes above chajja than the length of the spout shall be more than Chajja projection. Ends of Spout shall be tapered and any cutting through brick/ RCC structure shall be done by the Contractor, rates are deemed to be included of this aspects. (c) providing 15mm thick cement plaster in cement mortar 1:3 mixed with water proofing compound @ 3% by weight of cement over bottom and vertical surfaces finishing the surface even and smooth without using extra cement. (d) Damp proof course on horizontal surfaces with preparation and applying one coat of self priming (33% dilution) and two coats of undiluted material with @ 10.67 litres per 10 sqm damp proof of approved make for water proofing and damp proof course and on vertical surfaces preparation of surfaces and applying one coat of self priming (33% dilution) and one coat of undiluted material with @ 4.85 litre per 10 sqm damp proof for water proofing . (e) Graded Brick bats filling under sunken floor. (f) PCC 1:3:6,type C-1,using 20mm graded stone aggregate 75mm thick, over brick bats filling as in subbase to receive tiles Complete all as specified and directed. Note:- (i) For payment purpose only floor area shall be measured. (ii) After Coating of Water proofing compound ponding test shall be carried out by filling the sunken surface with water for 72 Hrs and get approved by Engr-in-Charge if any leakage/ seepage noticed the Contractor will rectified without any extra payment.

Dismantling of Boarding any description including shutters of existing cup boards Complete all as specified and directed.

Supply and fix 18 mm thick block board laminated on one side of commercial quality exterior Grade -I fixed with screws as in cup board shutters/shelves and pelmets box etc including lipping/beading all over shutter complete all specified and directed.

Supply and fix 18mm thick prelaminated particle board exterior grade medium density, one side with decorative choice lamination and the other side balancing white lamination as in panels of partitions/ cup board shelves including providing wooden brackets for support of laminated boards and the like fixed in wooden frame with wooden beading complete all as specified and directed.

Supply and fixed in repairs 25mm dia stainless steel drapery curtain rod complete with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and as directed.

Dismantling floor ,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Materials and labour for coloured glazed ceramic tiles 300 mm x450 mm & 7 mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including provision of backing coat of 10mm thick in cement mortar 1:4, complete all as specified and directed.

Materials and labour for coloured Non skid ceramic tiles 400 mm x400mm x 7 mm thick in floors etc.,laid over 15 mm thick screed bed of cement mortar 1;6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles finish complete all as specified and as directed.

Material and labour for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of cement mortar(1:6) 15 mm thick for laying floor tiles complete all as specified and as directed.

Material and labour for coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of cement mortar(1:6) 15 mm thick for laying floor tiles complete all as specified and as directed.

Ditto all as item No 73 but in skirting with backing coat of 10mm 1:4 cement mortar cement mortar complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specically provided for, complete all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in filleting/padding and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including wooden battens /casing /capping and conduit etc and making good disturbed surfaces of walls, floors, ceilings etc. complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC ( FRLS) insulated sheathed copper stranded conductor cable concealed in wall/floor, run in and including PVC conduit not less than 20 mm dia as per IS with all fittings such as bends, tee, junction boxes, etc of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets, fan regulators etc for one light/fan/call bell point controlled by one. one way switch complete all as specified and directed.

All as per Srl item No 78 above but for one 5 Amps socket outlet on same/below board with other switches.

All as per Srl item No 78 above but for one 5 Amps socket outlet on independent board.

Material and labour for point wiring complete with two single core, PVC FRLS insulated, unsheathed, multi stranded bright annealed copper conductor cable, 2.5 Sqmm 1100 Volts, FRLS grade drawn through and including PVC conduit not less than 20 mm medium grade as per IS with all fittings such as bends, tee, junction boxes etc of suitable size concealed in walls, ceilings etc. & including MS/GI sunken boxes with modular inner and surface plate for housing modular switches, sockets, regulators etc and one run of 2.5 Sqmm PVC insulated, unsheathed, multistranded, copper conductor cable FR grade and connected to common earth dully complete suitable for housing modular switches, sockets, fan regulator etc complete all as specified and as directed. Note :- Cutting and making good of chasis in the wall/ceiling /floor is deemed to be included in the quoted rates.

Supply and fix Modular switch, one way, 6 Amps,1 Module complete all as specified and directed Make : Anchor/ Havells/ Legrand

Supply and fix Modular switch, one way, 16 Amps,1 Module complete all as specified and directed Make : Anchor/ Havells/ Legrand

Supply and fix Modular bell push, 6 Amps,1 Module complete all as specified and directed Make : Anchor/ Havells/ Legrand

Supply and fix Modular Fan regulator, electronic, step type, 120 watt, 2 Module complete all as specified and directed Make : Anchor/ Havells/ Legrand

Supply and fix Modular Socket outlet, 6A/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed Make : Anchor/ Havells/ Legrand

Supply and fix Modular Socket outlet, 6 Amps, 2/3 pin combined, 2 module complete all as specified and directed Make : Anchor/ Havells/ Legrand

Supply and fix Bell ding dong, AC, 230 Volts, single pole complete all as specified and directed Make : Anchor/ Havells/ Legrand

Supply and fix in repai Deccorative wall mounted light opal glass with crome finish suitable for 1X4.5W LED with lamp complete all as specified and directed Make : Jaguar DWL-CHR-MB160275531B , equivalent model in Bajaj/Havells.

Supply and fix ceiling rose surface type, PVC /polycarbonate isolated body, 50x28 mm two to three terminals all as specified.

Supply and fix in repairs for modular white cover plate with frame, 1 module complete all as specified and as directed. Make : Legrand/Anchor Roma/Crabetree.

Supply and fix in repairs for modular white cover plate with frame, 3 module complete all as specified and as directed. Make : Legrand/Anchor Roma/Crabetree.

Supply and fix in repairs for modular white cover plate with frame, 6 module complete all as specified and as directed. Make : Legrand/Anchor Roma/Crabetree.

Supply and fix in repairs for modular white cover plate with frame,8 module complete all as specified and as directed. Make : Legrand/Anchor Roma/Crabetree.

Supply and fix metal fiush mounting box 1 module complete all as specified and as directed.

Supply and fix metal fiush mounting box 3 module complete all as specified and as directed.

Supply and fix metal fiush mounting box 6 module complete all as specified and as directed.

Supply and fix metal fiush mounting box 8 module complete all as specified and as directed.

Supply and fix Rigid non-metallic PVC conduit 20 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc in surface in wall/celling/floor etc. complete all as specified and directed.

Supply and fixing sheet metal enclosure for DB's SPN, with metal double door, 415 volt IP 43 with 200 amps rated bus bar 4 way complete all as specified and directed. Make :- Legrand / L&T / Siemens/ HPL

Supply and fixing sheet metal enclosure for DB's SPN, with metal double door, 415 volt IP 43 with 200 amps rated bus bar 8 way all as specified and directed.. Make :- Legrand / L&T / Siemens/ HPL

Supply and fixing sheet metal enclosure for DB's TPN, with metal double door, 415 volt IP 43 with 200 amps rated bus bar 4 way complete all as specified and directed.. Make :- Legrand / L&T / Siemens/ HPL

Supply and fix in repair sheet metal enclosure with socket plug top and MCBs single pole and neutral enclouser with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps Complete all as specified and directed.

Supply and fix MCB SP 6 to 32 Amps 240 volts 10 KA C series Complete all as specified and directed. Make- Legrand Cat. Nos 408595 Or equivalent in Siemens/ L&T

Supply and fix MCB SPN 32 to 40 Amps 240 volts 10 KA C series Complete all as specified and directed. Make- Legrand Cat. Nos 408617 Or equivalent in Siemens/ L&T

Supply and fix MCB TPN 32 to 40 Amps 240 volts 10 KA C series Complete all as specified and directed. Make- Legrand Cat. Nos 408680 Or equivalent in Siemens/ L&T

Supply and fix MCB TPN 63 to 100 Amps 240 volts 10 KA C series Complete all as specified and directed. Make- Legrand Cat. Nos 408663 Or equivalent in Siemens/ L&T

Supply and fix in repair PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep Complete all as specified and directed.

Supply and fix in repair PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep Complete all as specified and directed.

Supply and fix in repair PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200 mm x 150 mm and 50 mm deep Complete all as specified and directed.

Supply and fix in repair PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep Complete all as specified and directed.

Supply and fix in repair decorative ultra slim square profile linear Light Linea lighting fixture extruded polycarbonate, enviromental frendily, energy efficent ready to use pack 20W LED 6000K, complete all as specified and directed MAKE : Crompton, Model No. CCS-103-20-65-SL-DP-NWH or equivalent in Bajaj/ HAVELLS.

Supply and fix in repair decorative ultra slim square profile linear Light Linea lighting fixture extruded polycarbonate, enviromental frendily, energy efficent ready to use pack 10 W LED 6000K, complete all as specified and directed. MAKE : Crompton, Model No.CCS-103-10-65-SL-DP-NWH or equivalent in Bajaj/ HAVELLS.

Supply and fix in repair decorative ultra slim square profile linear Light Linea lighting fixture extruded polycarbonate, enviromental frendily, energy efficent ready to use pack 5W LED 6000K, complete all as specified and directed MAKE : Crompton, Model No.CCS-103-5-65-SL-DP-NWH or equivalent in Bajaj/ HAVELLS.

Material and labour wiring for circuit/ sub main wiring 2x2.5 Sqmm+1x2.5 Sqmm earth wire PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable in concealed/surface as required including in stove enameled steel conduit conduit in 20mm complete all as specified and directed.

Material and labour wiring for circuit/ sub main wiring 2x4.00 Sqmm+1x4.00 Sqmm earth wire PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable in surface/ recessed as required in PVC casing caping complete all as directed

Material and labour wiring for circuit/ sub main wiring 2x6.00 Sqmm+1x6.00 Sqmm earth wire PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable in surface/ recessed as required in PVC casing caping complete all as directed

Disconnecting all existing electric supply and taking down exhaust fan 300/230/250 mm of any make and sweep dismantlling blades, checking for repairs required Note: Repairs/ Replacement of spares will be measured and paid separately under relevant item for Exhaust fan.

Hanging / fixing only exhaust fan of any make or sweep connecting up complete with after cleaning and painting with existing colour (grey) and including provision of copper conductor cord 3 core PVC insulated and sheathed 0.5 Sqmm from celing rose to fan connector & testing ,Complete all as specified & as directed. Note: The exhaust fan shall be fitted with new set of washers, nuts etc.

Materials and labour for removing the burnt winding and rewinding the exhaust fan any sweep with super enamelled copper winding wire of suitable gauge, insulating, putting sleeves etc complete all as specified and directed

Supply and fix in repair Fan capacitor 2.5 MFD, 250 V. complete all as specified and directed

Supply and fix louvers for exhaust fan of any sweep made with aluminium alloy and matching colour with exhaust fan, white washing or colour washing to the disturbed surface of wall complete to match with the existing surface all as specified and directed.

Disconnecting carefully water and electric connection from geyser, taking down carefully storage type water heater of any type and capacity and dismantling geyser by removing glass wool, thermostat, heating element for checking of defects, repalcement of defective thermostat, heating element of any capacity, indicating lamps (round/rectangular) flange assembly, top or bottom cover half round plate glass wool etc where required, cleaning of inner container by anti corrosive liquid removing scales repair by brazing, Re-assemblong of geyser and refixing at its original location and testing complete all as specified and directed. Note: Repairs/ Replacement of spares will be measured and paid separately under relevant items.

Supply and fixed in repairs PCB card ( No- 408385-006/250 VAC/500mA ) suitable for existing geyser 50/35 Ltr complete all as specified and directed. Make:- Jaguar/Racold/Bajaj/Usha

Supply and fixed in repairs thermostat having range 0 to 100 C for geyser as original size of 25/35/50ltrs capacity geyser complete all as specified and directed. Make:- Ditzs/ Racold/ Shakti/Spheroat

Supply and fixed in repairs heating element 2 KW with round or triangular base for 50 ltrs capacity geyser complete all as specified and directed. Make:- Ditzs/ Racold/ Shakti/Spheroat

Supply and fixed in repairs lamp indicator with red colour 230 volts complete with fixing arrangement round or rectangular shape and size as per existing geyser complete all as specified and directed. Make:- Ditzs/ Racold/ Shakti/Spheroat

Supply and fixed in repairs cord flexible 230 volts 3 core 2.5 sqmm copper conductor PVC insulated and sheated cable from geyser to power point to each geyser complete all as specified and directed.

Supply and fixing Industrial plug with a 3 pin ( 2P+N) 32 Amp complete for geyser complete all as specified and directed. Make:- Bajaj/ HAVELLS/Legrand/L&T

Supply and fixing Industrial socket with a 3 pin ( 2P+N) 32 Amp complete for geyser complete all as specified and directed. Make:- Bajaj/ HAVELLS/Legrand/L&T

Supply and fix in repair 36W LED 5700K Ultra modern recess mounting luminare suitable for armstrong/ grid/ POP ceiling complete with separate electronic driver & high brightness SMD LEDs, complete with connecting accesseries & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting, complete all as specified and directed. MAKE : CROMPTON , Model No. LCTLRNE-36-FO-CDL or equivalent in Bajaj/HAVELLS.

Note : The amount against Schedule of Credit on Page No. 42 shall be deducted from the total amount quoted against Sch 'A' while deriving lum Sum for Acceptance.

Santhi Enterprises

shubham Enterprises

M/S PRAMOD SURESHCHANDRA AHER

United Enterprises

HARI SAI ENTERPRISES

SHRI SULAI ELECTRICALS