PROVN OF OTM ACCN AT MADHOPUR UNDER GE BASOLI

Amount

Lumpsum price worked out by the contractor for Building works as listed in Schedule 'A' Part-I

Lumpsum price worked out by the contractor for Internal water Supply works as listed in Schedule 'A' Part-II

Lumpsum price worked out by the contractor for Plumbing works as listed in Schedule 'A' Part-III

Lumpsum price worked out by the contractor for Internal Electrification Works as listed in Schedule 'A' Part-IV

Lumpsum price worked out by the contractor for AC Referigeration works as listed in Schedule 'A' Part-V

Lumpsum price worked out by the contractor forSite Clearance works as listed in Schedule 'A' Part-VI

Lumpsum price worked out by the contractor for Road Path and Culvert Works as listed in Schedule 'A' Part-VII

Lumpsum price worked out by the contractor for Widening of Roads as listed in Schedule 'A' Part-VIII

Lumpsum price worked out by the contractor for Hard Standing Works as listed in Schedule 'A' Part-IX

Lumpsum price worked out by the contractor for Sewage Disposal works as listed in Schedule 'A' Part-X

Lumpsum price worked out by the contractor for Lightning Protection works as listed in Schedule 'A' Part-XI

Lumpsum price worked out by the contractor for Area Drainage works as listed in Schedule 'A' Part-XII

Lumpsum price worked out by the contractor for Security Fencing and Compound wall works as listed in Schedule 'A' Part-XIII

Lumpsum price worked out by the contractor for External Water Supply works as listed in Schedule 'A' Part-XIV

Lumpsum price worked out by the contractor for External Electrification works as listed in Schedule 'A' Part-XV

Lumpsum price worked out by the contractor for Dismantling and Demolition works as listed in Schedule 'A' Part-XVI

AC Refergeration Supply and fixing electronic voltage stablizer for automatic operations, single phase, naturally air cooler, indoor wall mounted type and designed for input variation between 170V to 270V with output voltage stablized to 230V with accuracy of +/- 2.5% high/low voltage protection with time delay device, voltmeter, Amps meter and of capacity 2 KVA complete all as specified and as directed.

Supply and fixing electronic voltage stablizer for automatic operations, single phase, naturally air cooler, indoor wall mounted type and designed for input variation between 170V to 270V with output voltage stablized to 230V with accuracy of +/- 2.5% high/low voltage protection with time delay device, voltmeter, Amps meter and of capacity 3 KVA complete all as specified and as directed.

Supply, installation, testing and commisioning of Desert cooler electric driven, 1 single phase made out of 1mm thick GI sheet for body with water tank of capacity 50 litres and with front grill and side direction shutters, suitable for minimum Air delivery of 4000 Cum per hour approx 450mm sweep fan blade size with mild steel curved blades duly painted with synthetic anti corrosive paint, fitted to body including prewired electric 4 speed switch control and one 6 Amps piano switch water immersed pump of minimum capacity 40 watts 1300 rpm suitable for 230 volts, 50 HZ AC supply and one 6 Amps piano switch, fan motor of minimum capacity 105 watts 1400 rpm, 230 volts, 50 HZ and water inlet pipe with brass float valve of size 15mm and outlet with brass drain plug of 20mm. the cooling pad for three sides shall be of honey comb type. (Note :- the rate shall be inclusive of 3 core 2.5 sqmm PVC sheathed and inculated flexible copper cable chord 2 metre long with 3 pin 5 Amps top plug for power supply complete all as specified and directed.

ROAD PATH Providing and applying 2.5 mm thick road marking strips(retro reflective) using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe heater,driven by experienced operator on road surface incl cost of material,labour,T&P,cleaning the road surface of all dirt,silt,oil,grease and foreign material etc complete all as specified and as directed.

Solar rod having 6 LED of colour red/yellow house in plastic body cell battery and light senscor well protected in side polycarbonated sheet device protected with power coated wire mesh cage system mouted over 47 mm dia steel tube powder coated of length 600 mm having sheet footed for firm grip to ground. System workable for 8 to 10 hours complete all as specified and as directed.

Stainless steel round road delineator having reflector type red/yellow colour in plastic body protected in side polycarbonated sheet, protected with powder coated wiremesh cage system mouted complete all as specified and as directed.

Reflective type cat ey having colour red/yellow to a side, casted aluminium allow of size 100X100X20mm with built in steam of suitable length for fixing with protected in side complete all as specified and as directed.

S & F in repair stainless steel location boards type 'C' of size 100 cm x 76 CM, made up of stainless stell tubes framing of grade Fe 304, with top board at 9 ft above ground with letters, figures sand base of high density prismatic retro reflective tape of superior qualiy on both sides of the aluminium composite pannels (ACP) 3mm thick, including necessary excavation for potholes of size 30CM x 30 CMx 60 CM deep with PCC 1:2:4 type B- 2 using 40mm graded aggregate all as specified and directed.

INTERNAL WATER SUPPLY Construction of valve chamber size 60 X 60 X 60 cm (Internal dimension) with 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) sub base of floor, 50mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in floor, finished even and smooth without using extra cement, one brick thick wall in cm 1:4 using old size sub class 'B' bricks and plastering internally and externally upto 150mm below GL 15 mm thick with cement mortar (1:4) and MS sheet cover not less than 6 mm thick with angle iron frame size 40x40x6mm, locking arrengement and painting with two coats synthewtic enamel painting over a coat of the red oxide primer including excavation and earth work in any type of soil complete all as specified and directed.

Drilling/cutting of existing CI pipeline 150 mm dia for making branch connection for 50 mm/25 mm GI pipeline including placement of MS clamp made of flat iron 50 x 6 mm bent to shape suitable for 150 mm dia pipe including welded with MS socket 25 mm dia etc complete with necessary nut bolt and washers, packing sheet required at site complete all as directed.

SEWAGE DISPOSAL LLDPE septic tank designed to carry sewage and sludge water, including earth work, excavation, returning filling, disposal of surplus spoils to a distance not exc 50 meter from starting points, in hard rock, PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) in foundation, 200mm thick, Vent shaft, connections etc. for 10 users (1600 litre capacity) including all fittings, fixtures, testing on completion Approximate Dimensions. Dia 1440 mm, height 1550 mm and total HRT 48 hr complete all as specified and directed.

Septic tank (Conventional) 100 users RCC Septic tank designed to carry sewage and sludge water, excavation in any type of soil complete all as specified & as shown on drawings.

Soakage well, 2.40 m dia and 3.00 m depth below inlet pipe (depth of inlet pipe 45cm below normal ground) including excavation and earth work in any type of soil, complete all as specified and as shown on drawings.

Soakage well, 3.00 m dia and 4.50 m depth below inlet pipe (depth of inlet pipe 45cm below normal ground) including excavation and earth work in any type of soil, complete all as specified and as shown on drawings.

INTERNAL ELECTRIFICATION M&L for modular point wiring with 1.5 sqmm (nominal area) PVC insulated FRLS and unsheathed multistranded coppeer conductor cable 1100 volts grade drawn through and including PVC rigid concealed conduit not less than 1.8 mm thick (ISI marked) with all accessories including suitable modular plate and modular metallic boxes of suitable way matching with sorrounding including 1.5 sqmm PVC FRLS insulated unsheathed copper to common earth dolly, complete all as specified and directed for the following : Note:- Proper colour coding is to be followed as per IS specification. (a) One light controlled by modular switch 6 Amp, SP, one way 240 volts.

(b) One Ceiling/Exhaust fan point controlled by one modular switch SP, one way, 6 Amp, 240 Volts.

(c)One multi pin modular socket 5 Amp independent.

(d) One multi pin modular socket 5 Amp on same board

(e) One bell/buzzer point controlled by one bell modular push.

All as per item No. 31 here-in-beofre but using 2.5 sqmm (nominal area) multistranded copper conductor cable & 2.5 sqmm size PVC insulated FRLS and unsheathed copper conductor cable FRLS for earth continuity (green colour) for one modular 3 pin socket outlet 15 Amp multi purpose independent point controlled by 16 Amp, modular switch, SP, one way, 240 Volts for socket, complete all as specified and directed.

Supply and fixing box MCB protected socket with sheet enclosure single pole 25 Amp with 3 pin plug top AC connection from socket point stablizer complete all as specified and as directed.

Supply and fixing decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly,energy efficient LED luminaire, 32W 6500K with all connected accessories internally pre-wired connecting lead of 3 core 1.5sqmm flexible copper wire from ceiling rose to fitting complete all as specified and as directed.

Supply and fixing decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly,energy efficient LED luminaire, 22W, 6500K with all connected accessories internally pre-wired connecting lead of 2 core 1.5sqmm flexible copper wire from ceiling rose to fitting complete all as specified and as directed.

Supply and fixing of trim cosmo surface round Slim surface mounted LED panel with premium diffuser to ensure glare free & even light distribution LED luminaire, 12W 6000K with all connected accessories internally pre-wired, including 32W LED Lamp connecting lead of 2 core 1.5sqmm flexible copper wire from ceiling rose to fitting complete all as specified and as directed.

Supply and fixing of recess mounting low depth aesthetically designed LED 60 cm x 60 cm flat panels glare free soft illumination 36 watt cool white connected accessories internally pre-wired, including LED light connecting lead of 3 core 1.5sqmm flexible copper wire from ceiling rose to fitting complete all as specified and as directed.

Supply & Fixing Exhaust fan 300 mm sweep metal body complete including louvers and connecting up including making provision of hole in wall & copper 3 core cable 1.5 sqmm multi strandard from ceiling rose to connector to fan complete all as specified and as directed.

Supply & Fixing Ceiling fan BLDC 1200 mm sweep,White in colour, 230 volt , 5 Star rating,26 Watt with down rod,canopy cover etc and connecting with copper conductor 3 core flexible .50 sqmm from ceiling rose to fan complete all as specified and as directed.

S & F high performance IP66 LED streetlight 20 watt, housing made of die-cast aluminium, with street optic lens,with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.5sqmm from ceiling rose, and 20W LED light etc. drawn through and including 32mm bore GI light grade protecion pipe upto 1.0m length with suitable fixing accessories on walls, complete all as specified and as directed. Make: Wipro Cat Part No. LR02-261-XXX-57-XX or its equivalent of Bajaj/Havells

M & L for earthing complete with G .l earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below GL ) with top edge of the plate not less than 1.5 m below the normal ground level connected galvanized earth lead wire 4.0 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50 M, including PCC chamber in PCC (1 : 2 : 4), type B1, using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl cover with handle , watering arrangement with funnel internally secured with wire mesh with 20 mm dia light grade GI pipe for watering, 15 mm dia medium grade, Gl pipe for earth wire protection with and including alternate layer of charcoal dust and common salt. complete all as shown in electrical plate No 3 connected to DBs all as specified and indicated including testing on completion. Note : - (i) Gl wire upto 7.5m will be measured and paid under this item only extra lead will be measured and paid seperately under relative link.

EXTERNAL ELECTRIC SUPPLY M&L for platform of size 3000X 2500 x 1500 mm for transformer complete all as specified and as shown on drawing No CEPZ/C-TD/002/13.

M&L for earthing complete with galvanised steel earth plate eletrode 600mmx600mm and 6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edges, of the plate not less than 1.5m below normal ground level, connected to the Galvanise Iron earth lead 32mmx6mm (GI Strip) size, by means of bolts, nuts, check buts and washers of galvanised iron and 32mmx6 mm earth lead protected by provision of GI medium grade pipe 40 mm bore including provision of aggregates with 40 mm thick cover of RCC (1:2:4) , reinforced with XPM (weight not less than 4 kg per sqmm) and frame of angle iron 40mmx40mmx3mm and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe of suitable length for watering perforated at bottom placed on top edged of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in hard/dense soil, returning filling in distance not exceeding 50 mtr and removal of surplas soil to plate No 3 of SSR 2009 Part-I and connecting to feeder pillers and Transformer all as specified including testing on completion complete all as specified and directed.

Supply, laying, jointing and testing, LT cable 1100 volts grade of cross sectional area 240 Sqmm single Core as per IS-7098 Part-I, XLPE insulated aluminium conductor heavy duty served with an inner sheathing PVC tape, galvanized steel strip or wire armoured with an overall PVC sheathing laid in trenches, fixed along the poles or passed through GI pipe using clamps wherever required laid under floors, road etc fixed concealed in walls encased in GI pipe connecting with suitable size of lugs and aluminium thimbles for incoming and outgoing cables complete all as specified and as directed. (Note : MS clamps with nuts, bolts washer etc shall be measured and paid separately under relevant items).

Supply, installation, testing and commissioning of LT Feeder pillar made out of 3.15mm thick CRCA sheet and mounted on angle iron frame of size 65x65x6mm and 450mm high (Outdoor type) weather/dust proof, factory made, IP-54 with openable shutters on both sides front and rear having locking arrangements, totally enclosed weather proof, powder coated over a coat of primer suitable for 440V, 3 Phase, 4 wire 50 C/s, aluminium bus bar of of suitable size and capacity, AC supply, electrically connected as per norms and fitted including connecting up all out going MCCB/MCB with suitable size of Alu bus bar or with stranded copper cable and fixing on suitable 'U' shaped PCC platform comprising of the following accessories complete all as specified and directed. (i) Aluminium bus bar with proper colour code -04 Nos.1200 Amp Cap duly fixed on suitable size insulator, nuts bolts etc complete as per OEM recommendations. (ii) Supply and fix LT switch gear 40 Volts 3 phase, 4 wire 50 cycles, cubicle or truck type complete with air cricuit breaker, overload protection, no volt release with necessary CT's meter and cable boxes of rating upto 800 Amps.( Incoming )- 01 Nos (iii) MCCB TP rupturing capacity 50 KA 440 Volts, 3 phase cap 320 Amps Ics=100 Icu thermal magnetic relase with adjustable setting 80 % to 100 % (Ics=100 % Icu) -01 No (iv) MCCB out going TP rupturing capacity 35 KA 440 Volts, 3 phase cap 200 Amps Ics=100 Icu thermal magnetic relase with adjustable setting 80 % to 100 % - 02 No (v) MCCB out going TP rupturing capacity 35 KA 440 Volts, 3 phase cap 250 Amps Ics=100 Icu thermal magnetic relase with adjustable setting 80 % to 100 % - 01 No (vi) MCCB out going TP rupturing capacity 25 KA 440 Volts, 3 phase cap 100 Amps Ics=100 Icu thermal magnetic relase with adjustable setting 80 % to 100 % - 04 No

Note: The schedule of credit has been attached in tender in Pdf format and amount of credit schedule i.e. Rs 10,54,816.40/- shall be deducted from the total amount of BOQ to arrive at the contract sum.

SRM BUILDERS AND ENGINERS PVT.LIMITTED

A.V BUILDERS

Onkar Nath Bhalla And Sons Contractor Pvt. Ltd.

Shekhar Enterprises

Chandra Construction