REPAIR / REPLACEMENT OF OLD UNSV METER PANELS, BLDG SECURITY LIGHTS, CELLING LIGHTS WITH CONNECTED INTERNAL WIRING, CONDUCTING OF OPEN WIRES, SOLAR WATER HEATERS, SOLAR PANELS, GEYSERS ETC DISTRIBUTION BOXES AT KAMPTEE AND FORT AREA -- UNDER GE KAMPT

Amount

Taking down point wiring of any type (copper/aluminum), light fittings of any type and any size, switches, sockets, regulators, bell push, call bell, ceiling rose, switch boards, etc and making good to the disturbed surfaces of walls/ floor including white washing/ colour washing/ distemper to match with existing finishes, complete all as specified and directed.

M&L for Point wiring complete for One light/Fan/Exhaust Fan/Bell point controlled by one switch with PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade FRLSH PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including earth wire of same size, pressed steel modular boxes sunk on wall incl modular cover with frame of any size complete including dummy switches wherever required all as specified and making good disturbed surfaces. Note :- Cost of cable of size 2.5 sqmm FRLSH provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate.

All as per item No 2 above but One 3 pin 6 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 2 above but with cable size 2.5 sqmm for One 3 pin 6 amps socket out let point on independent board complete all as specified and directed.

All as per item No 2 here in before but with cable size 4 Sq mm for one 5 pin 16 Amps socket out let on independent board, complete all as specified and directed

Supply and fixing modular switch piano single pole, 1-way ,6 Amps, 230 volts, 1 module, complete all as specified and directed.

Supply and fixing modular switch piano single pole, 2-way 6 Amps, 230 volts, 1 module, complete all as specified and directed.

Supply and fixing modular switch piano flush type 16 Amps, 230 volts, single pole one way, one module, complete all as specified and directed.

Supply and fixing modular socket outlet 2/3 pin 6 Amps, 230 volts, 2 module, complete all as specified and directed.

Supply and fixing modular socket multipurpose 3 pin 6/16 Amps, , 230 volts, combined 2 module, complete all as specified and directed.

Supply and fixing modular step type two module electronic fan regulator heavy duty 120 watts, five steps, 230 volts , complete all as specified and directed.

Supply and fixing Modular Bell push 6 Amp , 230 volts, 2 module pole, 1-way, complete all as specified and directed.

Supply and fixing in repair call bell, Ding dong type, 230 volts AC single pole complete all as specified and directed.

Supply and fix wireless call bell with bell push (moveable) distance upto 100 mtrs, complete all as specified and directed

Supplying & fixing for ceiling rose PVC Polycarbonate isolated body, three terminals, complete all as specified and directed.

Taking down ceiling fan/exhaust fan, light fittings and re-fixing the same after wiring, complete all as specified and directed

Supply & Fix modular 20 Amp Heavy Duty MCB COMBO Box, 4 module with MCB SP of capacity 20 Amp, for AC complete all as specified and directed.

Supplying and fixing LED batten, 4',20 watt (cool/warm white), surface / wall mounted with polycarbonate housing, high optically efficient polycarbonate diffuser, luminaire lumens >1900 lms, luminous efficiency > 90 lm /watt, LED binning as per ANSI Bin C78.377A as per IEC 624718 & electrical insulation class 1,IP20, 50000 burning hrs (min) as per L 70 criteria, complete all as specified and directed.

Supplying and fixing LED batten, 2',10 watt (cool/warm white), surface / wall mounted with polycarbonate housing, high optically efficient polycarbonate diffuser, luminaire lumens >900 lms, luminous efficiency > 90 lm /watt, LED binning as per ANSI Bin C78.377A as per IEC 624718 & electrical insulation class 1,IP20, 50000 burning hrs (min) as per L 70 criteria, complete all as specified and directed.

Supply only Decorative wall light 4 watt METALIT Decorative Wall Mounting with different finishes with Soda Glass Type suitable for 4 W T32 LED Lamp with E27 base. complete all as specified and directed.

Supply and fixing Lamp holder/angle holder insulated body with black/white plate for batten fittings incl 7 watt LED Bulb complete all as specified and directed.

Supply and fixing in replacement of LED Inverter bulb of wattage 12 watt, Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours, complete all as specified and directed.

Supply and fixing in replacement of LED C 35/E37/E27 threaded type bulb 5 watt, for threaded bulb holder, complete all as specified and directed.

Supplying, fixing in replacement Bulk head , luminaire 10 watt LED, internally prewired with and including premium quality diffuser for glarefree light and fixing arrangements for fixing the light fitting complete all as specified and directed.

Supply and fix building security light LED 25 W with Lumen O/P 2000-2500 with driver with rated voltage 240 V, 50Hz,including GI bracket (made out of 25 mm dia light grade GI pipe) 0.8 m to 1.2m bent to shape including FI clamps nut bolts etc complete all as specified and directed.

Supply and fixing of Smart integrated 30 Watt Smart Bright, All in one Solar Street Light ,Overcharged & deep discharge protection for battery, MPPT solar charge controller, LiFeP04 lithium Ferro Phosphate battery, maintenance free system, inbuilt BMS system, IP-65, lumen output ≥ 1500 Lm, Colour temp 5700K, Surge protection 5 KV, 50000 burning hrs (min), including nuts, bolts, washers. complete all as specified and directed.

Supply and fix LED Foot Light - 3W, 2/3 module, warm white IP65 white & grey finish, BIS certified LED and drivers for fixing in 2/3 modular box plate, complete all as specified and directed.

Supply and fix 18 Watts Black/white Body LED magnetic track light with aluminium frame for moving Light (Indoor Use) (Warm White/Cool white) complete all as specified and directed.

Supply in replacement post top lantern LED type 20 watt, 230 watt volts AC outdoor type with 360 degree indirect light IP 65 protection, Aluminium Light Fixture complete all as sepcified and directed.

Supply & fix fittings with surface mount /recessed mount LED down lighters 12 W (Round/Square), cool white/warm white including driver with rated voltage 240 V , 50 Hz, complete all as specified and directed.

Supply & fix fittings with surface mount /recessed mount LED down lighters 15/18 W (Round/Square) including driver with rated voltage 240 V , 50 Hz, complete all as specified and directed.

Supply and fix 10 Watts Black/white Body LED Spot Focus Wall Light 13Cm Height (Indoor/outdoor Use) (Cool/Warm White, Aluminium Body) complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt (Warm white/cool white), 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed.

Supply and fixing LED Linear Profile Strip (Warm White) 3000 K IP65 ), 12w/mtr High brightness IP65 LED strips with uniformity of light required for perfect outdoor application Complete all as specified and directed.

Supply and fixing FLEXIION LED Strip (Warm White) 3000 K IP65 18 Mtr), High brightness IP65 LED strips with uniformity of light required for perfect outdoor application Complete all as specified and directed.

Supply and fix in repair LED driver for 10-24 W (2A/3A) for LED Bollards/Posttop lantern/security light etc, complete all as specified and as directed.

Supply and fix in repair LED driver for 36 W-60W (3A/5A) for LED Bollards/Posttop lantern/security light etc, complete all as specified and as directed.

Supply and fixing BRILLANTE LINEAR WALL WASHER 6H 7 W 3000 K, Crafted from Aluminum Die Cast with Bi-Directional Beam. Its integrated LED ensures long-lasting and energy-efficient with IP65 Protected. Complete all as specified and directed

Supply and fix LED COB lights 12 watt (Warm White/Cool White) , New generation, energy saving, aesthetically designed, recessed mounted down light pressure die-cast aluminum heat sink & high efficiency long life, mounted on MCPCB with high efficacy of 140 lm/W used for enhanced lumen output complete all as specified and directed.

Supply and fix LED COB lights 6/8 watt (Warm White/Cool White) , New generation, energy saving, aesthetically designed, recessed mounted down light pressure die-cast aluminum heat sink & high efficiency long life, mounted on MCPCB with high efficacy of 140 lm/W used for enhanced lumen output complete all as specified and directed.

Supply and Fix in replacement goose neck wall lights with white body 03/05 W warm white complete all as specified and directed. Note: As per sample

Supply and fix aviation light aluminium housing with poly-carbonate enclouser complete all as specified and directed.

Supply and fixing in replacement new generation, energy saving and environmental friendly long life LED Flood light fitting of wattage 30 watt (Warm White/Cool White/RGB) made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type , IP 66 complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the sizes 2x1.5 Sqmm with earth wire of 1x1.5 Sqmm including dismantling of old unsv submain wiring complete all as specified and directed.

As per item No 44 above but 2x 2.5 Sqmm with earth wire of 1x2.5 Sqmm complete all as specified and directed.

As per item No 44 above but 2x 4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed.

As per item No 44 above but 2x 6.0 Sqmm with earth wire of 1x6.0 Sqmm complete all as specified and directed.

As per item No 44 above but 4x 10.0 Sqmm with earth wire of 1x10.0 Sqmm complete all as specified and directed.

Supply & fixing of sheet metal enclosure Vertical TPN DB 4 Way double door As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase with 2 Neutral bar, 2 earthbar and Cable ties for Cable manage-ment, fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for easy of installation, Prefitted masking sheet, Reversible Door for IP 54 DB's, alongwith 125 Amp MCCB as incomer including dismantling of old unsv DBs complete all as specified and directed.

S & F for sheet metal enclosure MCB DB HTPN 4 way Horizontal type with suitable rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fixing MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 100 amp rat-ed bus bar of suitable size plate and common neutral link all en-closed in standard steel sheet flush mounting type factory fabricated, powder coated complete with out MCB and with enclo-sure blank plates for unused way suitable for 4 way ISI marked completed all as specified and directed.

Supply and fixing MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 100 amp rat-ed bus bar of suitable size plate and common neutral link all en-closed in standard steel sheet flush mounting type factory fabricated, powder coated complete with out MCB and with enclo-sure blank plates for unused way suitable for 12 way ISI marked completed all as specified and directed.

Supply and fixing MCB TPN 40-63 Amp rating 415V, 10KA 'C' curve and current carrying ca-pacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB SP 6-32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB SPN 40-63 Amp rating 240V, 10KA 'C' curve and current carrying ca-pacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fix in replacement of MPM2-5100-V24 Single Phase 1 HP Booster Pressure riser with Tank Pump Size: 25x25 mmSeries: MMB, Voltage: 220 VType of Product: Booster Pressure Pump with Tank, Flow Rate: 3900-1380 LPH Head: 15-44 m Model No: HMPM2-5100-V24, Power Rating: 0.75 kW, complete all as specified and directed.

M&L for re-winding of ceiling fan 1200mm sweep which of copper winding with proper grade/guage super enamelled copper winding wire including warnishing so as to achieve original specifications (spares will be used and measure in respective items) and reasembling etc complete all as specified and directed.

M&L for re-winding of ceiling fan 1400mm sweep which of copper winding with proper grade/guage super enamelled copper winding wire including warnishing so as to achieve original specifications (spares will be used and measure in respective items) and reasembling etc complete all as specified and directed.

M & L for replacement of defective ball bearing for ceiling fans/exhaust fans/Air-circulators of any size and of any make complete all as directed.

M&L for replacement of metal exhaust fan motor of size 300 mm, complete all as specified and directed.

M&L for replacement of PVC exhaust fan motor of size 200/250 mm, complete all as specified and directed.

M&L for replacement of PVC exhaust fan motor of size 300 mm, complete all as specified and directed.

M&L for replacement of BLDC RF PCB Board With Remote for BLDC Ceiling Fan for Ceiling fan of size 1200/1400 mm of any make and any size (as per sample), complete all as specified and directed.

M&L for replacement of fan blade of metal exhaust fan 450 mm, complete all as specified and directed.

M&L for replacement of fan blade of metal exhaust fan 300 mm, complete all as specified and directed.

M&L for replacement of fan blade of PVC exhaust fan of size 200/250 mm, complete all as specified and directed.

M&L for replacement of fan blade of PVC exhaust fan of size 300 mm, complete all as specified and directed.

M&L for replacement of Ceiling fan blade of size 1200/1400 mm of any make and any size (as per sample), complete all as specified and directed.

M&L for wire-mesh outside/inside the exhaust fan around hole for exhaust fan of any size and any type and from any place (Building height upto 15 mtr), if wooden frame required to be done by the contractor )(rates to be inclussive) complete all as specified and directed.

M & L for replacement of defective capacitor of size 2.5 mfd ISI marked for any type of fans suitable for 250V/230V including making connection complete all as specified and directed.

Supply and fixing in repair of Heavy duty hanging clamp suitable for 1200/1400 mm sweep complete all as specified and directed

M & L for replacement of gun metal bush suitable for any type/model/size of fans complete all as specified and directed.

M & L for spray painting of ceiling fans/exhaust fans/wall fans of any size, any type and any make motor, body, blade and frame with one coat of synthetic enamel paint by spray painting to achieve smooth and uniform finish incl removal of existing paint and writing of MES No complete all as specified and directed.

Supply and fix heavy duty exhaust fan, steel body (04 blades) AC single Phase. 230V of size 450 mm sweep with, blades, and frame and louvers, and outer side wire mesh, complete all as specified and directed

Supply and fix 300mm sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, complete all as specified and directed

Supply and fix 200/250mm sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, complete all as specified and directed

Supply and fix electric water heater, storage type, steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed

Supply and fix electric water heater, storage type steel body with steel inner tank and heating element upto 2 KW capacity 35 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed

Supply and fix electric water heater, storage type steel body with steel inner tank and heating element upto 2 KW capacity 50 litre (Horizontal type), BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed.

Material and labour for making hole (by Core Cutting only) of suitable size for 300/250 sweep sweep exhaust fan in wall or window with grill etc and including grouting bolts, cutting chasing and plastering, painting etc., to match with the existing surface complete all as specified and directed.

Supply and fixing in replacement of 400mm wall/oscillating air circulators, 230volts, AC, single phase complete with all fixing accessories all as per site requirement, complete all as specified and directed.

S&F in replacement heating element 2 KW (Traingular type) made of copper, ISI marked, 230 Volts suitable for 25/50 Ltr capacity of Geysers as per site requirement , brass metal, CP complete all as directed.

S&F in replacement Heating element 2 KW (Assembly type) made of copper, ISI marked, 230 Volts suitable for 25 Ltr capacity of Geysers as per site requirement complete all as directed

S&F in replacement Thermostat made of copper, ISI marked, suitable for 25 Ltrs capacity of Geyser as per site requirement complete all as directed.

S&F in replacement PVC connection Hot water grade 18” long 15 mm dia with two Nos coupling nut of brass, heavy duty, ISI marked, complete all as specified and directed.

S&F in replacement PVC connection Hot water grade 24” long 15 mm dia with two Nos coupling nut of brass, heavy duty, ISI marked, complete all as specified and directed.

Supply and fixing in repair modular switch piano single pole, one way 6 Amps 1 module, complete all as specified and directed.

Supply and fixing in repair modular switch piano flush type 16 Amps single pole one way, one module, complete all as specified and directed.

Supply and fixing in repair modular socket outlet 2/3 pin 6 Amps combined 2 module, complete all as specified and directed.

Supply and fixing in repair modular socket multipurpose 3 pin 6/16 Amps combined 2 module, complete all as specified and directed.

Supply and fixing in repair modular step type two module electronic fan regulator heavy duty 120watts 240 volts. , complete all as specified and directed.

Supply and fixing in repair Modular Bell push 6A 1 module pole, one way, complete all as specified and directed.

Supply and fix in replacement Flame Retardant (FR) PVC casing caping of Size 20 mm x 12 mm (length 6 feet) , Ivory Colour, Unplasticised formulation for prolong storage or usage, double lock, ISI Marked as per IS 14927, Highly durability, Resistance to oil and grease, complete all as specified and directed.

Supply and fix in replacement Flame Retardant (FR) PVC casing caping of Size 25 mm x 16 mm (length 6 feet) , Ivory Colour, Unplasticised formulation for prolong storage or usage, double lock, ISI Marked as per IS 14927, Highly durability, Resistance to oil and grease complete all as specified and directed.

Supply & fixing , Rigid non-metallic PVC conduit of size 20mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends andfixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, complete all as specified and directed.

Supply and fix in replacement RJ-11 telephone socket (1 skt in module) with transparent shutter module complete all as specified and directed.

Supply and fix in replacement RJ-11 telephone socket (2 skt in module) with transparent shutter module complete all as specified and directed.

Supply and fix in replacement RJ-45 internet data socket with transparent shutter module all as directed.

Supply and fix in replacement TV socket 1 module all as directed.

Supply and fix in repair Plug top 16 Amp ,3 pin, 240 Volt all as specified and directed.

Supply and fix in repair Plug top 6 Amp ,3 pin, 240 Volt all as specified and directed.

Supply and fix in repair switch socket combination16 Amp , 240 volt with Box all as specifeid and directed.

Supply and fix in repair switch socket combination 6 Amp , 240 volt with Box all as specifeid and directed.

Supply and fix in repair Electronic fan regulator step type (Switch/socket) type, AC, 230V all as specified and directed.

Supply and fix in replacement 0.5 sqmm 3 core copper wire (Flat) FRLSH, colour : white, complete all as specified and directed

Supply and fix in replacement 1.0 sqmm 3 core copper wire FRLSH, complete all as specified and directed

Supply and fix in replacement 2.5 sqmm 3 core copper wire FRLSH, complete all as specified and directed

Supply and fix in replacement MINI MCB 25 Amp 'C' Curve for AC, complete all as specified and directed

Material & Labour for taking out the existing surface/switch boards with switch & sockets and replacing with Modular metal/PVC flush box with modular cover plate with frame 3 module complete all as specified and directed.

All as per item no 110 above but of 4 module, complete all as specified and directed.

All as per item no 110 above but of 6 module, complete all as specified and directed.

All as per item no 110 above but of 8/12 module, complete all as specified and directed.

Dismantling/taking down and repair of single Phase 0.5/1.0/1.5 HP Booster Pressure riser with Tank Pump of any type and any Size including transpotation to civil workshop for repairing,overhauling, replacement of rubber gasket etc including re-installation, testing and commisssioning, complete all as specified and directed.

Supply and fix in replacement of electronic meters temper proof single phase LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr deep in soft/loose soil and getting out for taking down/laying UG Cable of any description and in any position, complete all as specified and directed.

Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 Mtr & depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed.

Taking down the unserviceable LT cable of any size from tranches/ walls /floor etc complete all as specified and as directed.

Supply and laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 4 Core, ISI marked as per IS 7098 (Part-I) in trench/floor/on pole/wall complete all as specified and directed.

Supply & Fixing in replacement LED fittings IP65 rated LED Bollard (Inverte Pyramid type) triangular design with soft 360 deg light distribution 8/9W, 230V, 50Hz complete on suitable PCC 1:2:4 alongwith suitable connectors to connect with 10sqmm X 4 core cable having protection from water and soil complete all as specified and directed.

Supply and fix Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe For laying of Electric cable of size 50mm outer diameter and 38 mm inner Diameter with IS 14930 (part 2):2001 laid in trenches,wall,floor,pole including bends, sockets and other connected accessories complete all as specified and directed.

Supply and lay in replacement of GI tube light grade 50mm size as in cable protection pipe including all fittings, including FI clamp for fixing complete all as specified and directed.

Supply and fix in repairs thermoplastic cable entry junction boxes of size 190x140x100 mm and IP-66/67 protection level with metric knock out fixed on poles with MS clamps, nuts, bolts and washers including MCB SPN, 5-32 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc., separate (detachable) gland plate, bakelite connector 4 way 20 amp, dust and vermin proof, front door opening with hinges and locking arrangement, complete all as specified and as directed.

Material and labour for PCC Type B1 1:2:4 by using ( 20 mm aggregate stone aggregate) for making good to the road/PCC cutting, complete all as specified and directed.

M&L for removing of PVC/metal exhaust fans from any height and any place and cleaning by using thinner or colin/dry cloths including removing the grease and oil buildup from the exhaust fan. Complete all as specified and directed

M&L for servicing of electric kitchen of any size and any type including cleaning the chimney/hood including removing the grease and oil buildup from the chimney and duct. without damaging the chimney. and replacement of filters that trap the grease and oil from the smoke. Complete all as specified and directed

Servicing of Solar Water Systems by pouring the anti-corrosion/anti scaling agent solution in the make up tank to clear the water circulated pipes of heat convertors sets upto five solar panels of capacity upto 500 LPD and drain out the solution by opening the nuts and bolts of dead plugs placed at the end of the system and make the system serviceable as per site requirement complete all as specified and directed

Material & labour for cleaning of solar panels toughned glass with detergent and after that with coline solution and make the glass completely clean including repairing of minor leakages complete all as specified. Note : (a) Cleaning of solar panel glasses should be done once in a month for entire systems which is installed at 13 BRD is consider as one job. (b) Labour /Cleaning material rates for the same shall be included in rate quoted by the contractor

Supply, installation, testing and commissioning indoor type/wall mounted LT Panel factory made. The panel shall be made of 2.0 mm CRCA MS sheet and angle 50 x50 x6 mm thick MS angle iron frame work, duly powder coated finish (including CPRI test certified) protection class IP 42, panel mounted on angle 50x50x5mm frame and wall mounted, powder coated finish on out side over a coat of red oxide primer and two coats of red oxide only on inside, front opening with 4 Nos 200 amps rating insulated electrolytic Colour code copper bus bars mounted on procelain insulators and internal wiring with FRLS PVC insulated solid conductor cable of 6.0 Sq mm cross section and having the following : - Incoming:- (a) MCCB 100 Amps, rating 415 Volts, 4 pole , 25 KA (Ics = 100% icu) with adjustable thermal & magnetic release (80 - 100%) & earth fault protection - 01 No (L&T Cat No DZ0F0100CXC1 AOOOO) (b) Space for Digital tamper proof elect meter-03 Nos. Outgoing:- (a) MCB, TPN 63 Amps, 10 KA - 02 Nos (L&T Cat No BB40630C) (b) MCB, DP 32 Amps, 10 KA - 01 Nos (L&T Cat No BB20320C) (b) R/Y/B Neon LED Indicating lamp -01 Set (c) Digital Amp Meter & voltmeter with set of CT and PT -01 (L&T Cat No WL441010OOOO)

Supply, installation, testing and commissioning indoor type/wall mounted LT Panel factory made. The panel shall be made of 2.0 mm CRCA MS sheet and angle 50 x50 x6 mm thick MS angle iron frame work, duly powder coated finish (including CPRI test certified) protection class IP 42, panel mounted on angle 50x50x5mm frame and wall mounted, powder coated finish on out side over a coat of red oxide primer and two coats of red oxide only on inside, front opening with 4 Nos 200 amps rating insulated electrolytic Colour code copper bus bars mounted on procelain insulators and internal wiring with FRLS PVC insulated solid conductor cable of 6.0 Sq mm cross section and having the following : - Incoming:- (a) MCCB 200 Amps, rating 415 Volts, 4 pole , 25 KA (Ics = 100% icu) with adjustable thermal & magnetic release (80 - 100%) & earth fault protection - 01 No (L&T Cat No DZ1F0200DXD1 AOOOO) (b) Space for Digital tamper proof elect meter-03 Nos. Outgoing:- (a) MCB, TPN 63 Amps, 10 KA - 04 Nos (L&T Cat No BB40630C) (b) MCB, DP 32 Amps, 10 KA - 01 Nos (L&T Cat No BB20320C) (b) R/Y/B Neon LED Indicating lamp -01 Set (c) Digital Amp Meter & voltmeter with set of CT and PT -01 (L&T Cat No WL441010OOOO)

Earthing Complete with galvanised steel earth plate electrode 60cmx60cm x6mm thick burried directly in ground vertically to a depth not less than 2.5 metre below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connection by using earth 4 mm GI wire by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and other end of the earth wire connected to main switch board protected by galvanised iron medium grade pipe 40mm bore in wall/floor/and GI Pipe 40 mm bore light grade for watering with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC pit cover including necessary excavation and earth work in any type of soil, returning slurry approved soil and disposed of surplus soil to a distance not exceeding 50 Mtr away all as shown in electrical plate No 3 of SSR 2009 ( Part-I). Notes :- (a) The unit rate shall include for GI protection pipe, GI watering pipe, wire mesh, funnel and excavation, RCC pit cover, test point, galvanised iron strip from top of earth plate upto 7.5 metres above ground level and if GI protection pipe is less than 7.5 metres, no price adjustment shall be made. (b) If the testing result of earthing work is not found satisfactory then the contractor shall do another earthing work at his own cost and nothing shall be permissible on this account.

Material & labour for inspection and checking of fault in solar water heating system of 1000 LPD and rectify the fault including water supply pipe lines complete all as specefied and as directed

Cleaning of 500 ltr capacity PVC solar water tanks for with bleaching powder/non toxic solution throughly including removal of sand , clay silt, or any other material from inside the tank and making date of cleaning on tank complete all as directed.

Supply & Fixing in replacement of Gasket suitable for solar water heater panels as per matching/ existing complete all as specified and directed

Supply and fixing in replacement 25/32 mm dia hose pipe as per existing material size complete all as specified and directed

M&L for descaling the heat collector panel (capacity 100 Ltr each) by descaling pump using commercial grade acid mixed with water in the ratio of 1:10 (acid : water) after opening / dismantling the heat collector panel from each other and re-fixing the same after complete cleaning including providing new nuts & bolts, gasket packing, worn out brass flange including brazing work , all other required hidden work for complete descaling complete all as specified and as directed

Supply and fixing in replacement of old flat plate solar collectors toughned GLASS as per matching existing type , including all fixing accessories complete all as specified and as directed .

Supply and fixing in replacement of old flat plate solar collectors frame BOX, including all fixing accessories complete all as specified and as directed.

Supply and fixing in replacement of old flat plate solar collectors copper absorber, including all fixing accessories complete all as specified and as directed

Supply and fixing in replacement of flat plate solar collectors of solar water heaters of any capacity of size from 1992x1090x100(LxBxH) mm to 2100x1100x100 (LxBxH) mm consisiting of Solar Absorber plate made of heavy duty galss and heat absorber, tubes made of copper with insulation & glazing cover, Complete built in casing of aluminium body alongwith complete fixing accessories complete as per matching/ existing complete all as specified and as directed

Supply & Fix in replacement of fasteners up to 8 inch for fixing of geyser complete all as specified and as directed

Supply & Fix in replacement of inner tank suitable for 25/50 Lrs capacity geyser as per existing gauge and shape complete all as specified and as directed

Supply & Fix in replacement of outer body 18 gauge complete with bottom and top cover as per matching to existing type and size for 25/50 Ltrs capacity geyser complete all as specified and as directed

S&F in replacement of MCB SP of rating, 20 Amps, 240 volt, 10 KA 'B' Series complete all as specified and as directed

Disconnecting carefully water and electric connection from geysers and taking down of storage type water heater of capacity upto 50 ltr, 230 volt for cleaning and descaling of inner tank, heating plate assembly and element with suitable descaling solution properly including welding, soldering/brazing if required to arrest the minor leakage and re-assembling the complete geyser and refixing in existing position with fixing arrangement including necessary testings complate all as specified and directed.

Supply and fixing threaded type PVC water tank cover suitable for upto 500 ltr capacity PVC tank complete all as specified and as directed .

Supply & Fixing Rotational moulded polyethylene water storage tanks ISI Marked double layer (cylindrical vertical with closed top) of 500 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed

S&F in replacement of wall Red & Green lamp fitting with bulb holder & LED Bulb complete with all accessories complete all as specified and as directed .

S&F in replacement gun-metal, globe or gate valves, with iron wheel head, screwed both ends to iron pipe and fixed to 25 mm bore pipe complete all as specified and directed.

Material and labour for PCC Type D2 ,1:3:6 by using ( 40 mm aggregatestone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets andrailings upto 60 cm in height, copings, complete all as specified and directed.

Supply and fix PVC Flexible pipe 8 mm/12mm/16mm/25 mm of Ceiling Fan/Exhaust fan/water heater connecting wire including PVC clamp for fixing,complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 88,456.00]

Chinmaya Enteprises (BID ID -3494674)

M/S. ELECTROPOWER TECHNOLOGIES (BID ID -3501427)

SONA LAKSHMI ASSOCIATE (BID ID -3503630)