Loading
Loading…
Loading…
Tender Value
₹1.6 L
EMD Value
₹3,279
Closing Date
3 Oct 2026, 12:00 pm6d left
AE KWSD-II
1 K S Roy Road Block C 3rd Floor
Repair and painting of Registrars Chamber PAs Room and Ejlash of City Civil Court at City Civil Court Building Kolkata 700001 during the year 2026 27
2026_WBPWD_5074820_6
WBPWD/KWSD-II/AE/ NIT-12/2026-2027
Open Tender
CIVIL WORKS
Percentage
15 days
City Civil Court
Please refer Tender documents.
5 documents required · 5 mandatory
₹3,279
Yes
24 Sept 2026
24 Sept 2026
5 Oct 2026
25 Sept 2026
3 Oct 2026
25 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 9.8 | Sq.M. | 54.65 | ₹535.57 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.13 | Cu.M. | 8,340.85 | ₹1,042.61 |
| 3 | 15 mm cement plaster on rough side of single or half brick wall of mix:
1:6 (1 cement: 6 coarse sand) | 9.8 | Sq.M. | 395.35 | ₹3,874.43 |
| 4 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
Sal wood | 0.02 | Sq.M. | 1,16,520.3 | ₹1,747.8 |
| 5 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with
vertical grains or cross bands and face veneers on both faces of shutters.
30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 1.8 | Sq.M. | 3,167.95 | ₹5,702.31 |
| 6 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
100X58X1.90 mm | 18 | Each. | 107.1 | ₹1,927.8 |
| 7 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
300x16 mm | 5 | Each. | 303.25 | ₹1,516.25 |
| 7.01 | 250x16 mm | 5 | Each. | 260.6 | ₹1,303 |
| 8 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
300x10 mm | 5 | Each. | 130.1 | ₹650.5 |
| 8.01 | 250x10 mm | 5 | Each. | 115.15 | ₹575.75 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.55 MB
BOQ_5163038.xls
BOQ • 0.29 MB
2911_ii.pdf
Tender Documents • 1.86 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .