P/L of Chainlink iron angle fencing at Turtim(Tongsteth) and Taksha of Nubra Forest Range. Length 899.00mtrs.

Amount

Earth work in excavation over area exceeding 30cm in depth as well as 10sqm on plane including disposal of excavated earth and lift up to 1.5 m disposal of earth to be leveled and neatly dressed. 175×0.45cmx.0.45cm×0.45cm= 15.94cum 120×0.45cmx.0.45cm×0.45cm= 10.93cum

Providing and laying in position cement concrete of specified grade including of centering and shuttering all work up to plinth level 1:3:6 (1 cement 3 fine sand 6 graded stone agg. 20mm nominal size) 1. crushed 175×0.45cmx.0.45cm×0.45cm= 15.94cum 120×0.45cmx.0.45cm×0.45cm= 10.93cum

Providing and fixing of fabricated angle iron fence post made of standard angle section 2.14 mtrs long with 15cm foot /toe at bottom with holes drilled and top bend (50mmx50mmx6mm)295

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns 20x4x0.45m=36.00sqm 15x4x0.45m=27.00sqm

Providing and fixing of G.I chain link fabric fencing cold dip galvanized of required width in mesh size 100x100mm including strengthening /binding with 2mmdia G.I wire or nut bolts and washer as required complete as per the direction of the in charge 534mtrs x1.52mtrs height (1680kgs) 490nmtrs x1.52mtrs height (1152kgs)

Cost of two entrance gate with sizing (12’.00”x6’.00”) and (4’.00”x6’.00”) each made of tubular pipe of 1"x3"of complete job

Cost and installation of one sign board with sizing (6’.00”x4’.00”) With 4’.00” leg of angle iron mesh framed including writing etc of complete job.

SP.FABRICATION