REPAIR/REPLACEMENT OF ELECTRICAL FITTINGS AND FIXTURES INCLUDING REWIRING TO CERTAIN OTM ACCN AND REPAIR MAINT TO CENTRIFUGAL /SUBMERSIBLE PUMPING SETS AT 1 (I) R AND O FLIGHT AND LPH AREA UNDER GE RANCHI

Amount

Taking down carefully aluminium point wiring any type including battens of any type except for ceiling or where not feasible for light/ fan/bell/socket or power and including unscrewing from board, fitting and fixure such as switches,socket, ceiling rose, lamp holder, pendants, bell, bell push, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed.

M&L point wiring with FRLS 1.5 Sqmm multi strand PVC insulated and unsheathed copper conductor cable in and including surface with caping and casing complete with 1.60mm thick Metal Boxes from 2 module to 12 module as required at site concealed in wall , painting boxes inside and out side with one coat red oxide primer complete with all accessories and all as specified including FRLS1.0 Sqmm PVC insulated unsheathed multistranded copper conductor to common earth and connected to earth dolly for following. (Note- Modular cover plate of any module with all fittings are included in point wiring).

One light/fan/exhaust fan point controlled by one switch.

One 5 pin 5 Amp switch socket out let point on an independent board.

One 5 pin 5 Amp socket out let point controlled by one switch on same board.

One bell point controlled by one push button on the same board with other switches or independent with cable 1.5 Sq mm.

All as per item 2 here in before but for one 15 Amp 6 Pin switch socket out let independent with 4 Sqmm FRLS including one run of 4 Sqmm copper conductor as earth continuity wire (Nominal Area) PVC unsheathed copper conductor single core multistranded complete all as specified.

M&L point wiring with FRLS 1.5 Sqmm multi strand PVC insulated and unsheathed copper conductor cable in and including surface through PVC conduit complete with 1.60mm thick Metal Boxes from 2 module to 12 module as required at site concealed in wall , painting boxes inside and out side with one coat red oxide primer complete with all accessories and all as specified including FRLS1.0 Sqmm PVC insulated unsheathed multistranded copper conductor to common earth and connected to earth dolly for following.(Note- Modular cover plate of any module with all fittings are included in point wiring).

One light/fan/exhaust fan point controlled by one switch.

One 5 pin 5 Amp switch socket out let point on an independent board.

One 5 pin 5 Amp socket out let point controlled by one switch on same board.

One bell point controlled by one push button on the same board with other switches or independent with cable 1.5 Sqmm

All as per item No 4 here in before but for one 15 Amp 6 Pin switch socket out let independent with 4Sqmm FRLS including one run of 4 Sqmm copper conductor as earth continuity wire (Nominal Area) PVC unsheathed copper conductor single core multistranded complete all as specified. Note : (i) All wiring cable shall be multistranded FRLS copper conductor of approved make duly approved by accepting officer before incorporating in work. (ii) Colour Code as per IS to be followed for wiring

S&F switch piano flush type 5/6 Amp single pole one way.

S&F Switch Modular type 6 Amp single pole one way.

S&F socket modular type 6 Amp 2/3 pin combined 2 module.

S&F Modular Bell push 6A 1 module.

S&F bell push , flush type, 5 amp, complete all as specified and as directed.

S&F Bell multi music type, AC, 230 volts, single pole, complete all as specified and as directed.

S&F in replacement Delux fan regulator ( Rotary step 100W) on the existing phenolic laminated sheet etc as required, complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin, 5 amp multipurpose, flush type, all as specified and as directed.

S&F Switch socket combinations 6 pin 15 Amp ISI Marked

S & F socket 6A/16A - 2/3 pin combined 2 module

M&L for lamp holder, insulated body with back plate batten/angle type for batten fittings complete all as specified & directed

S&F switch modular type 16 Amp SP one way. Make:Anchor/ Legrand/Havells(Crabtree)

S&F ceiling rose surface bakelite 65x50mm three terminal AC 230 volts complete all as specified and directed.

S&F for LED Tube light (Single side connection) ) with very high effiency suited for installation in existing tube light G13 lamp holders to give glare free cool day light 20W LED with Regal batten for LED tube (single side connection) upto 1x22W LED tube including pre-wired equivalent Philips/CG/Jaquar/Havells, 230 V Energy efficient with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size.

S&F for LED surface light 12 watt round panel with aluminum dia cast housing. Make: Philips/Wipro/ Bajaj/CG/Havells/Anchor/Jaquar)

S&F in replacement for LED light fittings, 8/9W bulk head luminaires, complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 V, 50Hz Make: Philips/Wipro/Bajaj/CG/Havells/Anchor

S&F in replacement for surface mounting CFL luminiares (Mirror Light) suitble for 1x9 W white powder coated CRCA sheet steel housing with opal acrylic diffuser and decorative end plates. Make : Anchor/Philips/Wipro/CG /Havells

S&F in replacement decorative wall mounting luminaries light suitable for CFLs of built in choke/incandescent lamps in and including LED lamp 9 watts sprially type with all accessories like lamp holders, etc complete with pre-wired complete all as specified and directed. Make: Philips/ Wipro/ Bajaj/CG/GE/ Havells-(City-2) /C&S)

Taking down MCB DB single pole and neutral upto 12 way with MCBs and keeping aside in safe custody for taking it as schedule of credit, complete all as specifed and as directed.

S&F sheet metal enclosure fo DBs for using MCBs single pole and neutral 4 Way double door with 200 amp rated bus bar 240 V all as specified Make : HPL/ Legrand/Havells/ Anchor

S&F sheet metal enclosure fo DBs for using MCBs single pole and neutral 8 Way double door with 200 amp rated bus bar 240 V all as specified Make : HPL/ Legrand/Havells/ C&S/ABB/ Indoasian/ Hager/Anchor

S&F sheet metal enclosure fo DBs for using MCBs single pole and neutral 12 Way double door with 200 amp rated bus bar 240 V all as specified Make : HPL/ Legrand/ Havells/Anchor.

S&F Single pole and neutral 40 A , 240 V

S&F Single pole and neutral 63 A , 240 V

S&F MCB single pole 6 - 32 Amp Make : HPL/ Legrand/Havells/Anchor

M&L Earthing complete with galvanized GI earth plate electrode of size 600 x 600 x 6.00 mm ,buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level)with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts ,nuts ,check nuts of galvanized iron or steel including excavation and earth work in any type of soil, charcoal salt filling 15 cm around the earth plate as shown in electrical plate no 3 of SSR part-I 2009, 20 mm bore, GI watering pipe medium grade 1.50 mtr long & GI protection pipe light grade 15 mm dia from earth pit to main board including making pit with PCC 1:3:6 type C1 and pre cast RCC cover 40 mm thick, reinforced with 8mm dia deformed bars @ 100 mm c/c both ways with lifting handles and funnel etc including testing as directed.

Supply and replacing 1100 volts grade heavy duty PVC insulated aluminium conductor, served with inner sheathing of PVC in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire, one twin core cable of size 10 Sqmm multi -strand complete all as specified and directed.

All as per item No 32 above but size 6 sqmm twin core cable.

All as per item No 32 above but size 4 sqmm twin core cable.

S&F IP 65 rated LED bollard with robust design and efficient light distribution 10 Watt. Make: Crompton/ Havells/ Bajaj

S&F in replacement Garden spike light and mini flood luminaires black powder coated pressure die cast alluminium housing with mounting bracket Make : Bajaj/HPL/CG

S&F in replacement of sub main wiring alongwith earth wire with the folowing sizes of FRLS PVC insulated copper 100V grade conductor, single core cable in surface/recessed as required drawn in and including PVC conduit with all accessores such as saddles, screws etc, complete all as specifed and as directed.

2 x 6.0 sq. mm + 1 x 4 sq. mm earth wire.

2 x 4.0 sq. mm + 1 x 2.5 sq. mm earth wire.

M & L for replacement of unserviceable 36 W recess mounting LED low glare luminiaires 2X2 with paralite powder coated CRCA sheet steel housing perforated metalic frame. Make : Bajaj/HPL/Philips

S&F PVC/ Polycarbonate PVC rectangular block for mounting switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 4"x4" and 40 mm deep, ISI marked, complete all as specified and directed.

S&F PVC/ Polycarbonate PVC rectangular block for mounting switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 8"x4" and 40 mm deep, ISI marked, complete all as specified and directed.

S&F PVC/ Polycarbonate PVC rectangular block for mounting switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size10"x12" and 40 mm deep, ISI marked, complete all as specified and directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp.

S&F in replacement of 5 Amp socket out let 5 pin ISI marked.

S&F in replacement of switch socket combinations flush 5 Amp 5 pin compete, ISI marked.

S&F regulator step type 450 watt 230 Volt 50 C/S.

S&F call bell ding-dong type AC 230 Volt

S&F in replacement of electronic chock 36/40 Watt ISI marked. Make - Philips/ Bajaj/Havells

S&F in replacement of tube rod LED type of 18 watt. Make- Philips/Bajaj/Havells

S&F angle holder with LED Lamp of 12 watt Watt, complete all as specified & directed.

S&F new generation post top energy saving environmental friendly long life aesthetically designed with symmetrical light distribution spun aluminium landscape luminaire with high power LEDs as light source 36 watt. Make; Havells/ Bajaj/Crompton.

S&F Distribution board 4 way TP&N Vertical loadline double door are fitted with Bus Bars, Neutral Links, Blanking Plates, Suitable for FP MCCB. Make:-Havells / Legrand / L&T

S&F CRCA sheet metal enclosure double door, outdoor type suitable size for Energy meter Fixed with cable terminals incl 3 Nos HDPE gland fixed on pole/wall/panel/where direction by Engr in charge with clamp nuts,bolts, PCC etc all as directed by Engr-in-Charge. Make:-Indoasian/Havells / HPL / L&T.

Supply & Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, complete all as specifed and directed. Make- Grandlay/ Havells /Finolex

S & Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, complete all as specifed & directed by Enginee-in-Charge. Make- Grandlay /Havells / Finolex /CCI

Supply & Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, complete all as specifed & directed. Make- Grandlay/Havells / Finolex

Taking out the submersible motor from bore/open well upto 20 HP including GI pipe of 50/65 mm dia complete all as directed and transportation of submersible motor upto 20 HP 3 Phase from pump house at any location in LPH Area under AGE E/M Yard, transporting to contractors workshop, dismantling and carrying out necessary repair/replacement of motor including reassembling, testing and commissioning for satisfactory operation as per the following :- (a) Cutting out existing winding of starter of submersible motor of any make and rewinding with same size of copper winding wire as existing as directed by the Engineer-in-Charge. (b) Straightening the slot of water of submersible motor of any make. (c) Replacement of thrust bearing block complete of submersible motor of any make. (d) Replacement of worm-out bushes of submersible motor as per manufactures design and specification. (e) Replacement of submersible cable 3 Core of suitable size 4 Mtr long complete with suitable clips. (f) Replacement of sand guard. (g) Providing of sleeves in end plate of submersible motor. (h) Replacement of cable gronment. (j) Replacement of water seal. (k) Replacement of studs with nuts. (l) Remetlling of motor shaft, turning to bring it to original size and shape and plastering of shaft of submersible motor. (m) Painting of motor and tranporting it back to site/store yard and testing to the entire satisfaction of Engineer-in-Charge.

All as per Item Srl No 56 above but of capacity upto 10 HP.

All as per Item Srl No. 56 above but of capacity upto 7.5 HP.

All as per Item Srl No. 56 above but of capacity upto 5 HP.

Reparing of submersible pump upto 20 HP and lowering down of motor pump set with GI pipe and rope all as directed and transportation of submersible pumps upto 15 stage from pump house at any location in LPH area under AGE E/M Yard, transporting to contractors workshop, dismantling and carrying out necessary repairs/replacement of pumps/testing as the following :- (a) Replacement of coupling of submersible motor pump key. (b) Overhauling of submersible pump and carrying out the following repairs. (c) Balancing of pump shaft and cutting of key slots. (d) Minor repairs of bowel assembly. (e) Re-threading of worn-out studs holes and providing over size studs with nuts. (f) Replacement of bowels bushes. (g) Replacement of neck ring. (h) Replacement of steel distance pieces. (j) Replacement of impeller. (k) Replacement of bowel. (l) Replacement of head extension. (m) Painting of pumps and transporting it back to site/store yard and testing to the entire satisfaction of Engineer-in-Charge.

S&F PVC insulated submersible cable water proof flat type 3 core with stranded copper conductor cable, 6 Sqmm, 1100 Volts grade inculding cable lugs/joints, connection to submersible motor and other end to aluminium amoured cable including jointing, complete all as specified and directed.

All as per Item Srl No. 61 above but of 4 Sqmm, 1100 Volts submersible cable.

S&F HDPE Borecaps of size 250 mm dia, complete all as specified and directed.

Replacement of old rusted GI Column Pipe medium grade of size 65 mm dia in pieces of 3.3 Metre long, lathe m/c threaded both ends in the bore/open wells complete all as specified and directed.

All as per Item Srl No. 65 above but of 50 mm dia.

All as per Item Srl No. 65 above but of 40 mm dia.

S&F of steel rope in submersible bore wells from motor to top edge of the bore well of size 6 sq mm dia (Multi wire stainless steel) for holding of submersible pump motor set, complete all as specified and directed.

M&L GI flange joints with rubber gasket of 3 mm thick chemically treated compressed including suitable size bolts, nuts and washer, complete as as specified and directed of size 65 mm dia.

All as per Item No 69 above but of size 50 mm dia.

S&F MS work as/or holding MS clamps on tube well for delivery/column pipe, fabricated out of flat iron section as directed, made to shape drilled fixed with 16 mm dia MS bolts, nuts, washers etc including one shop coat of red oxide primer, after preparation of surface, complete all as specified and directed.

Flushing/cleaning of bore well including taking out and lowering of new /repaired submersible pump set of any size (5 HP to 20 HP), 3 Phase 400/415 Volts in 200/250 mm size tube well upto existing depth of bore comprising following nature of work :- (a) Dip connecting existing pipe connection in any size and removing electric connection. (b) Errection of trapord/chain pulley lock at site. (c) Unscrewing the submersible pump and removing the same at site for relowering. (d) Transporting the trolley mounted DTH machine at site for flusing the bore well/further boring if required. (e) Flushing the bore hole through compressor operating 120 PSI after lowering the rig in length 1.5 Mtr x 80 Nos continously till clear water in obtained not less than 8 hrs.

M&L dismantling the power supply of electric motor any type including dismantling from pump and taking to workshop with necessary transportation and opening the complete motor and rewinding the motor with super enameled copper wire as per the existing guage with necessary insulation, sticks and varnishing, including replacement of shaft bearing of shaft and replacement of bearing 02 Nos and motor terminals plate/cable ducts and minor repair of strater complete of capacity 30 HP including two coat of synthetic enamel painting complete all as specified and directed including reassembling, testing and commissioning for satisfactory operation.

All as per Item No 73 above but of capacity 20 HP electric motor any type.

All as per Item No 73 above but of capacity 10 HP electric motor any type.

All as per Item No 73 above but of capacity 5 HP electric motor any type.

All as per Item No 73 above but of capacity 3 HP electric motor any type.

All as per Item No 73 above but of capacity 1 to 1.5 HP electric motor/booster pump any type.

M&L dismantling complete Centrifugal/Mono Block Pump set of any type and overhauling the pump re-threading of wornout holes of studs and providing over size studs with nuts and washers. Remantlling and balancing of shaft, replacement of gunmental bush, all bearing type 6309/6307/6307C etc and gland packing (12/8 mm) of pump set and refitting the same after the repair all as specified capacity 30 HP including two coat of synthetic enamel painting, SM No writings etc complete with base etc all as directed.

All as per Item No 79 above but of capacity 20 HP.

All as per Item No 79 above but of capacity 10 HP.

All as per Item No 79 above but of capacity 5 HP.

All as per Item No 79 above but of capacity 3 HP.

All as per Item No 79 above but of capacity 1 to 1.5 HP.

M&L Cement concrete (1:4:8) Type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and as directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed.

Excavation in trenches, n.exc. 1.5 m wide and n.exc 1.5m in depth for foundation and getting out in soft/loose soil, complete all as specified and as directed.

Demolition of cement contrete in ground floors and paving n.exc 15 cm thickness (below or above ground level), complete all as specified and as directed.

M & L Opening dismentling pump set 1/2 HP and taking out defective motor pump of any capacity from site, transporting to work shop for repair and rewinding with supper enameld copper conductor as per existing size and guage as recommended by OEM including varnishing drying cleaning to slots repair to any damage slot for smooth functioning of motor testing& transporting back at site ofter repair and refixing the same on its position reconnection testing, complete all as specified and as directed.

M & L opening the pump 1/2 HP assembled with motor trace out the defective parts of the pump melting grinding the shaft by lath machine to make as per original Shape and size and fixing the new parts as required, complete all as specified and as directed.

M &L filling of gland packing in pump side or as directed.

M & L transporting burnt Pressure Booster pump motor of 2 HP to work shop for opening the elect motor single phase230 volt and rewinding with supper enameld copper conductor as per existing size and guage including varnishing drying cleaning to slots repair to any damage slot for smooth functioning of motor testing, Opening the pump assembled with motor trace out the defective parts of the pump melting grinding the shaft by lathe machine to make as per original Shape and size and fixing the new parts as required & transporting back at site ofter repair and refixing the same on its position reconnection testing, complete all as specified and as directed.

Supply and replace Direct On Line (DOL) submersible starter 3 phase 415 Volt suitable for 5 to 7.5 HP submersible motor overload relay range 6.5 to 10 Amp. Make : Havells/CG/Anchor

Supply and replace Star Delta submersible starter 3 phase 415 Volt suitable for 7.5 HP to 10 HP submersible motor overload relay range 6.5 to 10 Amp. Make : Havells/CG/Anchor

Supply and replace, Nylon rope heavy duty, 12 mm dia with D clamps to tie the submersible pumpset motor for not slipping in the bore, all as specified and as directed.

india trading company

ashiyana electrical company