REPAIRS TO FLOORING INTERNAL WATER SUPPLYLINES REPAIRS TO JOINERIES AND INTERNAL ELECTRIFICATION OF MES COMPLEX TEMPORARY BUILDINGS MES INSTALLATION AND ZONE C AT INS RAJALI NAS ARAKKONAM

Amount

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B0 (12.5mm graded stone aggregate) as in levelling course over sub base complete all as specified and as directed..

Dismantling of wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises including removing of all the debris to a distance n exc 2 km out side the base at the disposal of the contractor complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 350 x 250mm x7mm/450 X 350 X 7mm thick as in dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10mm thick plaster on fair faces of brick work/concrete in CM 1:4 to receive tiles as in dado complete all as specified and as directed..

M&L Light Shade Vitrified ceramic tiles10 mm thick (square/rectangular)polished area of each tile not exc. 0.36 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick Screed bed with CM 1:6 complete all as specified and as directed

All as per Item no.5 but in vertical surfaces such as skirtings, dados etc.,including rendering10mm thick plaster on fair faces of brick work/concrete in CM 1:4 to receive tiles as in Skirting

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 18 sqm but not exceeding 0.38 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and as directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 18 sqm but not exceeding 0.38 sqm, in Skirting, etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including rendering 10mm thick of cement mortar 1:4 complete all as specified and as directed.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed with CM 1:6 ccomplete all as specified and as directed.

Demolition of stone slabs and tiles of any description or any thickness in floors, skirtings, risers etc laid ,bedded and pointed in any mortar.

M & L for Machine cut kota stone slab flooring 20-25mm thick over 20mm cement screed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M & L for Machine cut kota stone slab 20-25mm thick in skirting over 15mm cement screed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry in floors and pointed with white cement with admixture of pigment to match the shade of granite stone laid & jointed over and including 20mm cement screed in CM 1:6 all as specified.

M & L 20mm thick Granite (of any type) work (table rubbed and polished) in Skirting for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified..

M & L for treating the surface with beeswax polish on marble/ granite/Kota stone/ stone work where ever required to complete all as specified.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including hangers and hanging arrangements, including providing and fixing 12 mm thick gypsom ceiling board , fixed to the ceiling section withincluding finishing the joint of face board and applying two coats of plastic emulsion over one coat of primer complete

Taking down chowkats or frames exc 1.5 sqm but n. exc 4 Sqm each with shutter (without taking off shutter from the frame) and Complete all as specified.

Taking down chowkat or frame with shutters (without taking off shutters from the frames) not exc 1.5 sqm each.

Taking down shutters of any description exc 1 Sqm & n.exc.2 Sqm each.

S&F second class hard wood plain , solid , straight , chowkats and frames wrought , framed rebated on the soilid rounded or chamfered put together with glue pinned at joints.

S&F for 35mm thick Plain, framed, panelled shutters of 2nd class hard wood (two panel), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered perticle board with commercial veneering on both faces, the size of rail and style as per IS : 1003 (part-I), kiln seasoned chemically pressure treated.

Supply & fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm, wood grain printed PVC sheet used instead of Plain colour PVC sheet & edge reinforced with M.S. Square tube will be painted to match with printed sheet complete all as specified and as directed.

Supply & Fix Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face as per specification complete all as specified and as directed.

S&F 100 mm butt hinges, medium weight, cold rolled mild steel and fixed

S&F 75 mm butt hinges, medium weight, cold rolled mild steel and fixed

S & F Aluminium anodised barrel tower bolt all as above but 150mm long

S & F Aluminium anodised barrel tower bolt all as above but 125mm long

S&F extruded aluminium alloy handles fabricated types, anodised, each 150mm long

S&F extruded aluminium alloy handles fabricated types, anodised, each 125mm long

S&F 300mm long Aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded section all as specified.

S&F in repairs Door closer hydraulically of (extruded section body) regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

S&F powder coated anodised aluminium alloy sections 3 tier track sliding windows series B weight of section frame 1.248 kg/m and shutter section weight 0.547 kg/m Jindal or equivalent duly fitted with neoprene beading, glazing clips, tinted glass panes 4.80/5.0 mm nominal thickness,aluminium wire cloth 0.45 mm dia and average width of aperture 1.4 mm, aluminium alloy handles ,aluminium powder coated any colour deco grill 8 mm dia(75x75mm) etc including make good jambs and cills complete all as specified and directed by Enginner-in-Charge Note : rate shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle, 8mm dia aluminium powder coated colour deco grill etc

S&F powder coated anodised aluminium ventilator with fixed aluminium frame of size 65 x 40 x 1.98 mm thick or equivalent section fixed in vertical position with aluminium vertical members and half portion to be provided with 4 mm thick pinhead glass and remaining portion to be louvered using 4 mm thick pinhead glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and directed by Enginner-in-Charge Note : rates shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading etc

Dismantling boardings, any description, fixed in any position with screws complete all as specified and directed by Enginner-in-Charge

M & L 18/19mm thick Pre-laminated particle board, interior grade, prelamination one side with decorative choice lamination & other side balancing white lamination, fixed with nails as in cupboards / cabinets incl locking arrangement complete all as specified and directed by Enginner-in-Charge

S&F 18/19 mm wide 6 mm thick lipping on veneered particle as in cupboard shutter and shelves.

S&F in repairs 2nd class hardwood plain fillet square rectangular in section wrought sawn secured with screws exc 13 & n exc 25 sqcm in section all as specified and as directed by Engineer-In-Charge..

S&F75 mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed,tupe C21

S&F Extruded aluminium alloy handles 100mm long, fabricated type, anodised.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S & F 4mm thick sheet glass, ordinary quality, in squares n.exc 0.5 sq.m each pane.

S & F in repairs Aluminium XPM alloy wire cloth, average width of aperture 1.40mm and fixed with aluminium wire staples

M & L Preparation of old painted Steel surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying One coats of Synthetic Enamel paint.

Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of wood of any description over 10 cm in width or girth not other wise described complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M & L Preparation of old decorated/ plastered or unplastered wall surfaces and applying one coat of distemper oil emulsion complete all as specified and directed.

Material & Labour complete removal & prepartion of existing treatment and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) by using smart paint technique complete all as specified and as directed.

Taking up or down steel tubing 20mm dia bore and connection complete all as specified and as directed.

Taking up or down steel tubing 25mm dia bore and connection complete all as specified and as directed.

Supplying and laying in repairs of CPVC pipes of outer dia of pipe 20mm SDR 11.00 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed

Supplying and laying in repairs of CPVC pipes of outer dia of pipe 25mm SDR 11.00 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed

Taking down rain water pipe and sewage pipe of any size of pattern including all fittings, heads, shoes, bends etc.

S&F for 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F for 75mm dia bore PVC (SWR) bends any radius.

S&F for 110mm dia bore PVC (SWR) bends any radius

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding , low level flushing cistern and Flush pipe of 32mm dia but including seat cover) complete all as specified and as directed.

S&F in repairs PVC valve less flushing cistern low level 10 litres capacity with syphonic action type with inlet ball valves, float and handle and connections to pipes and fixing of chain and pull (or) lever including brackets and 32mm dia PVC flush pipe of 60cm long ccomplete all as specified and as directed.

S&F in repair vitreous china, wash hand basin white flat back size 550 x 400 mm white complete waste, chain and pug and precelain stopper including bracket complete all as specified and as directed..

S&F in repair of Vitreous China half stall urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

Supply & fixing in repairs fancy type pillar tap 15mm dia, cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly nut screwed for iron pipe complete all as specified and as directed.

Supply & fixing only 32mm waste fittings brass of chromium plated for wash basin etc, with long screwed shanks and fly nut, flange end bedded in red lead cement and others and complete all as specified and as directed.

S&F in repair bib taps concealed type with long shank and cup of fancy type,chromium plated screwed down high pressure with crutch or butterfly handle screwed for iron pipes of 15mm bore complete all as specified and as directed..

S & F in repairs 125 mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm

S & F in repairs flexible PVC waste pipe 32/40mm suitable for wash hand basin and Kitchen Sink all as specified and as directed.

S & F PVC (SWR) multiple Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair Angle valves fancy type,chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore complete all as specified and as directed..

S & F in repairs 20mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed (Minimum weight-210 gms) complete all as specified and as directed by Engr-in-charge.

S & F in repairs 25mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete (Minimum weight-455 gms) all as specified and as directed by Engr-in-charge.

S&Fin repairs plastic water closet seat cover, black,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device as in repairs complete all as specified and directed

S&F Stainless Steel pipe 25mm dia curtain Rod for windows, doors Opening etc complete all as specified and as directed.

S & F Stainless steel Curtain Bracket ( L type) for fixing curtain rod complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc of tank capacity exceeding 250 litres and not exceeding 500 litres all as specified and as directed

S&F in repairs of PVC water tank 500 lit capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling the same all as specified and as directed

S&F in repairs of PVC water tank 1000 lit capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling the same all as specified and as directed

Removing plants/herbs grown on walls/junctions with roots using herbicide chemicals and of existing brick and concrete in high raised building at any storeyed and making good the disturbed surfaces as per existing complete all as specified and directed.

M&L for clearing the blockage of WHB, bottle trap, urinal, sink etc by manually/mechanically and removing blockage from entire system and making it fully functiona all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick walls including racking out joints, hacking for key, scrubbing down with water etc.

M & L Rendering for 10mm thick in cement mortar (1:6) on other than fair faces of internal bricks or concrete surfaces finished even and smooth without using extra cement all as specified and s directed..

M & L Rendering for 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair Complete all as specified and s directed..

M&L for preparing newly plastered surfaces and applying two coats of oil bound distemper Emulsion emulsion over coat of primer on surfaces of walls including two coats of Bison putty on walls complete all as specified and as directed.

M &L applying two coat of cement based paint over a coat of primer alkali resistance on newly plastered or unplastered wall surface including preparation of surface, complete all as specified.

M & L Preparation of old decorated/ plastered or unplastered wall surfaces any applying one coat of cement base paint complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified.

M&L preparation of new steel surfaces of any descriptions over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer.

Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed.

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor wire drawn into existing concealed conduit including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following point wiring :- Make of cable : Plaza/Polycab/Finolex/ Havells

One light/ fan/ exhaust fan/ 3 pin socket independent board/ buzzer point controlled by one switch.

One 3 pin socket outlet 5 Amps,same board with cables 1.5 Sqmm size.

One light point controlled by two 2- way switches, with cable 1.5 Sqmm size.

All as per item ser no-2 above here in before but one 3 pin socket outlet 5/15 Amps, indipendent board/AC/ Geyser with cables 4.0 Sqmm size.Make :- Polycab/Finolex/Plaza/Havells

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor drawn into including PVC casing & caping/fixed on wall/roof/ceiling etc of size not less than 20 mm dia including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following :- Make for PVC casing & caping: SUDHAKAR / AVON PLAST /PLAZA , Make for Copper cable: Finolex/Polycab / Plaza.

One light point controlled by one switch.

One 3 pin socket outlet 5 Amps, indipendent board with cables 1.5 Sqmm size.

All as per item ser no-4 above here in before but one 3 pin socket outlet 5/15 Amps, indipendent board/AC/Geyser with cables 4.0 Sqmm size. Make :- Polycab/Finolex/Plaza

M&L for sub main wiring for phase and neutral with PVC FRLS insulated unsheathed multi stranded along with earth wire FRLS PVC insulted copper conductor, single core cable in and including surface/concealed /PVC conduit of appropriate size as specified for the following sizes. Note:- : 1. Cutting chases for concealed wiring shall be measured and paid seperately. 2. Rates are including taking down old unserviceable. Make for Copper cables: Finolex/Polycab / Plaza/ Havells. Make of PVC Conduit: SUDHAKAR/FINOLEX/AVON PLAST.

2x 4.0 sqmm and 1x 4.0 sqmm as earth wire

2x 6.0 sqmm and 1x 6.0 sqmm as earth wire

2x 10.0 sqmm and 1x 10.0 sqmm as earth wire

4x 10.0 sqmm and 2x 10.0 sqmm as earth wire

4x 16.0 sqmm and 2x 16.0 sqmm as earth wire

S&F in repair for switch piano, flush type single pole , one way 6 amp including repair/replacement of switch board if required complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for switch socket combination 2 in 1, 5 pin, 6 Amp flush type including repair/replacement of switch board if required complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for socket outlet 5 pin, 6 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for switch piano, flush type single pole , two way 6 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for switch socket combination 2 in 1, 6 pin, 6 and 16 Amp flush type universal including repair/replacement of switch board if required complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S & F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc and including taking down old all as specified and as directed by Engr-in-Charge . Make: Anchor/Cona/Leader/Lisha.

Taking down existing rusted switch board sunken box from site including removing fixtures and fittings such as switch, socket fan regulator complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces necessary plaster, white wash matches with existing colour of wall, floors, etc. all as specified and as directed.

Supply and fixing in repair of GI metal flush box suitable for mounting moduler plate of following modules:-

1 or 2 Module

3 Module

4 Module

6 Module

8 Module

12 Module

Supply and fixing in repair of combined both frame and cover plates fixing on mounting boxes for following modules:-

Cover plate with frame 1 Module

Cover plate with frame,2 Module

Cover plate with frame,3 Module

Cover plate with frame,4 Module

Cover plate with frame,6 Module

Cover plate with frame,8 Module

Cover plate with frame,12 Module

Supply and fixing in repair of modular switch one way 6A white Active one module all as specified and as directed by the Engineer-in-Charge

Supply and fixing in repair of modular switch socket combination 16 A, 6 pin 3 module flush type Active white two module complete all as specified and as directed by the Engineer-in-Charge .Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing in repair of modular switch socket combination 6 Amp, 5 pin flush type Active white two module complete all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing in repair of modular fan step regulator,120 W-2 module all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing in repair modular bell push 6A one module complete all as specified and as directed.

Supply and fix Eco compact wall mounted LED batten for T8 LED tube CAT CROMPTON DIJB12LT8-20 with ULTRON high efficency LED polycarbonate tube with in built driver and metal heat sink 18 watt icluding taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge.Make : Crompton LT8-20-865(2) /philips/wipro/Havells.

Supply and fix high efficiency wall mounted LED batten type polycarbonate tube of 9W 2 ft LED and including taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge . Make : Havells LHEXACP7IN1W010 or equivalent model of Philips/Crompton/wipro/ Surya.

Supply and fix Energy saving not less than 25 Watts LED light fitting ,IP65 powder coated pressure die cast aluminium high power street light with heatresisant toughened glass with lens by providing GI pipe medium grade 25 mm dia 1.5 Mtr in length with suitable size MS Clamp two nos made out of 25x3 mm FI incl two coat of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting and including taking down old u/s damaged all as specified. Make Surya/Havells/Philips/CROMPTON.

Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA B curve complete all as specified and as directed by Engr-in-chargeMake: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

S& F for sheet metal enclosure double pole and neutral with a two pin and earth plug and socket complete with one SP MCB 25-32 Amps. Make: Legrand/ Siemens/Scheneider/ABB

M&L for cutting chases on brick walls concrete surfaces not exc 10cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishes all as directed by Engr in charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 24-30 watt, 220 V AC cool white, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC warm white colour, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fix for Round recessed mounted LED panel luminire not less than 12 watts with panel and suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make: Philips/ Crompton Cat pt LCDEP-18-CDL / LSDEP-18-CDL .

Supply and fix for Square recessed mounted LED panel luminire not less than 12 watts with panel and suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make: Philips/ Crompton Cat pt LSDEP-15-CDL / LCDEP-15-CDL .

Supply and fix for round/ square recessed mounted LED panel luminire not less than 9 watts with panel and suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make: Philips/ Crompton Cat pt LCDEP-09-CDL / LSDEP-09-CDL .

Supply and fix for Bell, high ouyput speaker for noticable sound, white colour, AC, 240 volts, 50 Hz, single pole. Make: Anchor, GM

S&F in repair for socket outlet 6 pin, 16 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for bell push flush type, 6 Amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F MCB,DB SPN 12 way double door DB with 200 amps rated copper bus bar in SS enclosure double door type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule.Make: Legrand/ Siemens/Scheneider/ABB.

Supply and fix for MCCB 4 Pole, 415 V, adjustable Thermal & fixed Magnetic setting type 250 Amps with breaking capacity 25 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB.Note : Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V, adjustable Thermal & Fixed Magnetic setting type type 200 Amps with breaking capacity 25 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB,Note : Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V, Fixed thermal & Fixed Magnetic setting type type 150/160 Amps with breaking capacity 25 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB, Note : Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V, Fixed Thermal & Fixed Magnetic setting type type 125 Amps with breaking capacity 25 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V,adjustable Thermal & Fixed Magnetic setting type type 100 Amps with breaking capacity 10 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V,adjustable Thermal & Fixed Magnetic setting type type 63 Amps with breaking capacity 10 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix for MCB TP 415 V, 40-63 Amps with breaking capacity 10KA B curve complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix in repair for MCB TPN 415 V, 63-100 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix for MCB SPN 230 V, 40-63 Amps with breaking capacity 10KA B curve complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Material and labour for Earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level , with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected with and incl GI earth wire 4mm dia including alternate 5 layers of charcoal, salt crystal and including 15 mm dia GI pipe light grade by means of nuts, bolts, washers and necessary earth work upto 7.5 mtr and connecting to test point, LT Switchgear etc as per site requirement including necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC Cover with 6 mm dia MS bars 10 cm C/C on both ways as reinforcement complete all as shown in elecrical plate No 3 of SSR Pt- I including testing on completion complete all as specified and as directed. Note:(i) Quoted rate deemend to include necessary earth work PCC chamber, RCC cover, reinforcement, removal of surplus soil , site clearance etc.

M&L for GI Pipe 15 mm light grade galvanised, with all fitting laid in trenches all as specified and directed

S&F for Rigid PVC junction box three way 25 mm surface mounted four hole type for 5 Amp independent board complete with screw not and bolt all as specified and as directed by Engr-in-Charge

S&F for Rigid PVC junction box three way 32mm surface mounted four hole type for 15 Amp independent board complete with screw not and bolt all as specified and as directed by Engr-in-Charge

Supply and fix BEE Rated LED Lamps 10W - B22 / E27 Crompton/Bajaj/Usha

Supply and fix BEE Rated LED Lamps 20W - B22 / E27 Crompton/Bajaj/Usha

Supply and fix for Buzzer, sound output Ding Dong, high ouyput speaker for noticable sound, white colour, AC, 240 volts, 50 Hz, single pole. Make: Anchor, GM

BALA BUILDERS (BID ID -3425282)

R.P.TRADERS (BID ID -3425186)

CRJ ENTERPRISES (BID ID -3423973)

Green Ray Technologies (BID ID -3425346)

m/s SRI VALLI ENTERPRISES (BID ID -3425145)

VKR ENTERPRISES (BID ID -3423160)

RD ENTERPRISES (BID ID -3420870)