Erection of 5 nos. LED panel structure containing 9 nos. 300 W LED lights per panel at MKD-I OCM.

Amount

Item Description/ Heading

300 LED FLOOD LIGHT: Supply & Installation of 300 Watt LED, Operating Voltage Range 140-270 V, Operating Temp. range -10°C to +50°C, Rated Voltage 220- 240V/AC, 50Hz, System Wattage 400W ± 10%, Rated Current <1.15 Amp, Power Factor >0.95, THD <10%, Driver Efficiency >85%. ≥ 5 watts LED High Power, Beam Angle 65°, Product Lumen Output ≥ 44000 lm, Efficacy ≥ 110 lm/W, CRI > 70

FRAME FABRICATION: Fixing, bolting and complete welding of MS angles as per diagram. Only iron and steel material will be provided by WCL. (Consumables such as welding machine, cables, MS electrode, Oxygen, DA, Gas cutting torch, etc has to be arranged by the contractor only)

GI PIPE FOR EARTHING FOR PANEL BOX: G.I. Pipe (ISI Marked) for earthing with all accessories for panel box 2 No G.I. Pipe length (in mm) 200 mm G.I. Pipe dia 20 mm

ACCESSORIES GI WIRE: ISI marked G.I. wire shall be supplied per pole for earthing G.I. wire dia (in mm) G.I. Wire length (in m)

ACCESSORIES POWER CABLE: PVC Insulated, armoured power cable shall be supply per pole No. of core 4 Cross sectional area of cable (in Sq.mm) 10 Conductor material Aluminum Cable category PVC/ FR-LSH Length (in mtrs.,) 250 mtr

ACCESSORIES WIRING: PVC insulated wiring cable shall be supply per pole No. of core 3 Cross sectional area of cable (in Sq.mm) 4 Conductor material (for wiring) Copper Cable category (for wiring) Type C, FR-LSH Cable length.

HDPE PIPE: 63 mm DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench complete as required. acceptable 250 mtr

PANEL BOX: Outdoor type Double Door Cubical Type free standing totally enclosed dust & amp; Vermin Proof LT Panel suitable for 440Volts, 3 Phase 50HZ AC Supply system of suitable size with not less than depth of 500mm fabricated in compartmentalized made from CRCA sheet steel of 16SWG,FActory made, Cubical type with member Legs size of 40*6mm at the base, with powder coated ,having suitable Bus Bar for 100Amp. Aluminium Bus Bar of high conductivity with PVC Sleeves, DMC/SMC bus Bar supports, entire Panel shall have 2 nos. earth stud, and control wiring of 1.5sq mm PVC insulated Copper Conductor Cable, Cable Alley Bus Bar Chamber Cable Gland Plate Confirming to IP 54 protection, including providing following switchgear Following C curve MCB required in Box 1.32 AMP MCB 1 Pole :- 1 No 2.10 Amp MCB :- 1, No

CIVIL WORK: Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of High Mast pole in Size of 450 X450 X 1500 MM (Length X Width X Depth ), 1Nos Foundation Bolt Ø 20 MM length 600 MM grouted in each foundation. 1 No

Total impact of GST for the purpose of CTC

LBD LED PRIVATE LIMITED