CPPP

Technical BO

Works

Civil Works

Budgetary Quotations for Annual Maintenance of Fendering System inside Port Custom Bound Area in JNPA (2026-27)

Jawaharlal Nehru Port Trust

Jawaharlal Nehru Port Authority | Raigad, Maharashtra

Amount: Refer DocsCloses: 20 Apr 202615 Apr 2026Closed

Timeline

Published8 Apr 2026
Closed20 Apr 2026
Technical Evaluation—
Award—

Bids

4 Bids16 Apr 2026

#	Company	Status
1	ENTERPRISING ENTERPRISE LLP Admitted-Fee/PreQual/Technical/Finance 506 5TH FLOOR GRANDE EDIFICE AKURLI ROAD OFF W E HIGHWAY KANDIVALI EAST 400101 MUMBAI MAHARASHTRA 400101 INDIA UDYAM MH 18 0005535 27AAGFE2360M1ZA R M MII STATUS AS VERIFIED \| MUMBAI SUBURBAN \| MAHARASHTRA \| 400101	Admitted-Fee/PreQual/Technical/Finance
2	M/s Sadanand Engineering Works Admitted-Fee/PreQual/Technical/Finance	Admitted-Fee/PreQual/Technical/Finance
3	M/s. Shiv Langeshwar Enterprises Admitted-Fee/PreQual/Technical/Finance	Admitted-Fee/PreQual/Technical/Finance
4	MHATRE ENTERPRISES Admitted-Fee/PreQual/Technical/Finance	Admitted-Fee/PreQual/Technical/Finance

Corrigenda

Corrigendum

1 updatesLatest on 15 Apr 2026Submission Ends:15 Apr 202620 Apr 2026

Date changes

Download Ends15 Apr 202620 Apr 2026Submission Ends15 Apr 202620 Apr 2026Bid Opening16 Apr 202621 Apr 2026

Tender Value

Refer Docs

Closing Date

20 Apr 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

Dy Manager (PPD)

Address

Admin Building, JNPA, Sheva, Navi Mumbai

Work Description

Budgetary Quotations for Annual Maintenance of Fendering System inside Port Custom Bound Area in JNPA (2026-27)

Tender Information

Tender ID

2026_JNPT_904823_1

Reference Number

JNP/PPD/DGM-I/Budgetary Quotation/2026/416

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Location

Jawaharlal Nehru Port Authority

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

1 document required · 1 mandatory

Fee/PreQual/Technical/Finance

RequiredAll documents to be submitted as mentioned in budgetary document (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

Exempted

Important Dates

Last Activity

16 Apr 2026

Published

8 Apr 2026

Bid Opening

21 Apr 2026

Download Starts

8 Apr 2026

Download Ends

20 Apr 2026

Submission Starts

8 Apr 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (3 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and applying coal tar epoxy paint in three coats including scaffolding, chipping, cleaning, the surface including one coat of primer etc. complete.
2Dismantling, removing and chipping mechanically all loose disintegrated hollow damaged concrete up to the good concrete as per the direction of Engineer-in-charge. Item rate is inclusive of charges for labour, supervision, tools, tackles, scaffolding, safety equipment and shifting of concrete debris to the designated place as per BPCL etc., complete as per specification and as directed. Upto 75mm to 120 mm depth
3Removal of heavy corrosion products on the steel reinforcement bars, mechanically using wire brush and water jet cleaning etc., and thereafter providing and applying in one full continuous coat of anticorrosive treatment BASF MasterEmaco P130 or equivalent material on the cleaned old steel reinforcement bars (upto 32 mm diameter), without leaving any gap in the coating and ensuring to cover the rear side of the bars.
4Providing and fixing of TMT reinforcement bars wherever the old reinforcement has reduced to less than 20% of original diameter using binding wires or tack welding etc., as per the site condition. Item rate is inclusive of the materials, charges for labour, supervision, tools, tackles, scaffolding, welding electrodes, binding wire and applying BASF MasterEmaco P130 or equivalent material anti corrosive coating on the reinforcement bars etc., complete as per specification and as directed.
5Providing and fixing shear keys using 10mm diameter TMT bars after drilling holes of 12mm diameter and 100mm depth at 02 No. /sqm area on the concrete substrate, cleaning and grouting the holes with two component epoxy resin based anchoring grout MasterFlow 935 of BASF or equivalent material. Item rate is inclusive of the materials, all labour, supervision, tools and tackles, scaffolding and transportation etc., complete as per specification and as directed.
6Providing and laying of polymer modified single component, alkaline resistant fibre reinforced, duel shrinkage-compensated, thixotropic, cementitious patch repair mortar MasterEmaco S348 or equivalent material that achieves compressive strength of 35 MPa at 7 Per Days and finishing with trowel carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface on the beams, slabs. pile caps etc., where the thickness of application is less than 50mm in patches as per specification inclusive of bond coat. Item rate inclusive of all materials, labours, supervision, tools, tackles, transportation, scaffolding etc., complete as per specification and as directed
7Providing, and applying single component, high build, elastomeric, crackbridging, resistant to CO2 & SO2 and Chloride ion diffusion, UV resistant, breathable acrylic coating, with elongation at break exceeding 300% MasterProtect 300 or equivalent material applied in two coats (each coat 150 micron DFT) on acrylic based primer at an average total thickness of 300 microns DFT in two coats including acrylic resin based primer MasterSeal 399 or equivalent as per the recommendation of the manufacturers. Item rate inclusive of all materials, labours, supervision, tools, tackles, transportation, scaffolding etc., complete as per specification and as directed
8Providing & fixing wooden fender of size 2000mm x 200mm x 200mm Made up Sal wood painting with one coat of primer & 2 coats of epoxy paint approved by EIC and fixing it with 12mm SS 316 anchor bolt of length min 350 mm, recess to be filled with Hilti anchoring grout including cost of material, labours, tools, tackles and machinery as directed by Engineer-in-charge.
9Providing and Fixing of Cast iron Steel Bollard of 20 tons, with all hardware in E 8.8 Hot dip galvanized. Scope Includes delivery to JNPT, Removing of old Bollards, Core Cutting for new and Installing new Anchors using Chemical grouting and final installation of Bollard.
10Supply of V fender (SA 250H or equivalent) of 2m length for Service/Port craft berth having Energy absorption capacity of 4.2 T.M not to exceed reaction of 58.0 T including all required accessories etc.including cost of fender all its accessories, all labour charges, transportation charges up to site and minor tools etc., complete.

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Bid Opening Summary

finance_951047.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.81 MB

Work Item Documents

BOQ_951047.xls

BOQ • 0.37 MB

BudgetaryQuotation.pdf

Tender Documents • 0.80 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

ENTERPRISING ENTERPRISE LLP

Admitted-Fee/PreQual/Technical/Finance

506 5TH FLOOR GRANDE EDIFICE AKURLI ROAD OFF W E HIGHWAY KANDIVALI EAST 400101 MUMBAI MAHARASHTRA 400101 INDIA UDYAM MH 18 0005535 27AAGFE2360M1ZA R M MII STATUS AS VERIFIED | MUMBAI SUBURBAN | MAHARASHTRA | 400101

M/s Sadanand Engineering Works

Admitted-Fee/PreQual/Technical/Finance

M/s. Shiv Langeshwar Enterprises

Admitted-Fee/PreQual/Technical/Finance

MHATRE ENTERPRISES

Admitted-Fee/PreQual/Technical/Finance

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and applying coal tar epoxy paint in three coats including scaffolding, chipping, cleaning, the surface including one coat of primer etc. complete.
2Dismantling, removing and chipping mechanically all loose disintegrated hollow damaged concrete up to the good concrete as per the direction of Engineer-in-charge. Item rate is inclusive of charges for labour, supervision, tools, tackles, scaffolding, safety equipment and shifting of concrete debris to the designated place as per BPCL etc., complete as per specification and as directed. Upto 75mm to 120 mm depth
3Removal of heavy corrosion products on the steel reinforcement bars, mechanically using wire brush and water jet cleaning etc., and thereafter providing and applying in one full continuous coat of anticorrosive treatment BASF MasterEmaco P130 or equivalent material on the cleaned old steel reinforcement bars (upto 32 mm diameter), without leaving any gap in the coating and ensuring to cover the rear side of the bars.
4Providing and fixing of TMT reinforcement bars wherever the old reinforcement has reduced to less than 20% of original diameter using binding wires or tack welding etc., as per the site condition. Item rate is inclusive of the materials, charges for labour, supervision, tools, tackles, scaffolding, welding electrodes, binding wire and applying BASF MasterEmaco P130 or equivalent material anti corrosive coating on the reinforcement bars etc., complete as per specification and as directed.
5Providing and fixing shear keys using 10mm diameter TMT bars after drilling holes of 12mm diameter and 100mm depth at 02 No. /sqm area on the concrete substrate, cleaning and grouting the holes with two component epoxy resin based anchoring grout MasterFlow 935 of BASF or equivalent material. Item rate is inclusive of the materials, all labour, supervision, tools and tackles, scaffolding and transportation etc., complete as per specification and as directed.
6Providing and laying of polymer modified single component, alkaline resistant fibre reinforced, duel shrinkage-compensated, thixotropic, cementitious patch repair mortar MasterEmaco S348 or equivalent material that achieves compressive strength of 35 MPa at 7 Per Days and finishing with trowel carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface on the beams, slabs. pile caps etc., where the thickness of application is less than 50mm in patches as per specification inclusive of bond coat. Item rate inclusive of all materials, labours, supervision, tools, tackles, transportation, scaffolding etc., complete as per specification and as directed
7Providing, and applying single component, high build, elastomeric, crackbridging, resistant to CO2 & SO2 and Chloride ion diffusion, UV resistant, breathable acrylic coating, with elongation at break exceeding 300% MasterProtect 300 or equivalent material applied in two coats (each coat 150 micron DFT) on acrylic based primer at an average total thickness of 300 microns DFT in two coats including acrylic resin based primer MasterSeal 399 or equivalent as per the recommendation of the manufacturers. Item rate inclusive of all materials, labours, supervision, tools, tackles, transportation, scaffolding etc., complete as per specification and as directed
8Providing & fixing wooden fender of size 2000mm x 200mm x 200mm Made up Sal wood painting with one coat of primer & 2 coats of epoxy paint approved by EIC and fixing it with 12mm SS 316 anchor bolt of length min 350 mm, recess to be filled with Hilti anchoring grout including cost of material, labours, tools, tackles and machinery as directed by Engineer-in-charge.
9Providing and Fixing of Cast iron Steel Bollard of 20 tons, with all hardware in E 8.8 Hot dip galvanized. Scope Includes delivery to JNPT, Removing of old Bollards, Core Cutting for new and Installing new Anchors using Chemical grouting and final installation of Bollard.
10Supply of V fender (SA 250H or equivalent) of 2m length for Service/Port craft berth having Energy absorption capacity of 4.2 T.M not to exceed reaction of 58.0 T including all required accessories etc.including cost of fender all its accessories, all labour charges, transportation charges up to site and minor tools etc., complete.

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Providing and applying coal tar epoxy paint in three coats including scaffolding, chipping, cleaning, the surface including one coat of primer etc. complete.

2Dismantling, removing and chipping mechanically all loose disintegrated hollow damaged concrete up to the good concrete as per the direction of Engineer-in-charge. Item rate is inclusive of charges for labour, supervision, tools, tackles, scaffolding, safety equipment and shifting of concrete debris to the designated place as per BPCL etc., complete as per specification and as directed. Upto 75mm to 120 mm depth

3Removal of heavy corrosion products on the steel reinforcement bars, mechanically using wire brush and water jet cleaning etc., and thereafter providing and applying in one full continuous coat of anticorrosive treatment BASF MasterEmaco P130 or equivalent material on the cleaned old steel reinforcement bars (upto 32 mm diameter), without leaving any gap in the coating and ensuring to cover the rear side of the bars.

4Providing and fixing of TMT reinforcement bars wherever the old reinforcement has reduced to less than 20% of original diameter using binding wires or tack welding etc., as per the site condition. Item rate is inclusive of the materials, charges for labour, supervision, tools, tackles, scaffolding, welding electrodes, binding wire and applying BASF MasterEmaco P130 or equivalent material anti corrosive coating on the reinforcement bars etc., complete as per specification and as directed.

5Providing and fixing shear keys using 10mm diameter TMT bars after drilling holes of 12mm diameter and 100mm depth at 02 No. /sqm area on the concrete substrate, cleaning and grouting the holes with two component epoxy resin based anchoring grout MasterFlow 935 of BASF or equivalent material. Item rate is inclusive of the materials, all labour, supervision, tools and tackles, scaffolding and transportation etc., complete as per specification and as directed.

6Providing and laying of polymer modified single component, alkaline resistant fibre reinforced, duel shrinkage-compensated, thixotropic, cementitious patch repair mortar MasterEmaco S348 or equivalent material that achieves compressive strength of 35 MPa at 7 Per Days and finishing with trowel carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface on the beams, slabs. pile caps etc., where the thickness of application is less than 50mm in patches as per specification inclusive of bond coat. Item rate inclusive of all materials, labours, supervision, tools, tackles, transportation, scaffolding etc., complete as per specification and as directed

7Providing, and applying single component, high build, elastomeric, crackbridging, resistant to CO2 & SO2 and Chloride ion diffusion, UV resistant, breathable acrylic coating, with elongation at break exceeding 300% MasterProtect 300 or equivalent material applied in two coats (each coat 150 micron DFT) on acrylic based primer at an average total thickness of 300 microns DFT in two coats including acrylic resin based primer MasterSeal 399 or equivalent as per the recommendation of the manufacturers. Item rate inclusive of all materials, labours, supervision, tools, tackles, transportation, scaffolding etc., complete as per specification and as directed

8Providing & fixing wooden fender of size 2000mm x 200mm x 200mm Made up Sal wood painting with one coat of primer & 2 coats of epoxy paint approved by EIC and fixing it with 12mm SS 316 anchor bolt of length min 350 mm, recess to be filled with Hilti anchoring grout including cost of material, labours, tools, tackles and machinery as directed by Engineer-in-charge.

9Providing and Fixing of Cast iron Steel Bollard of 20 tons, with all hardware in E 8.8 Hot dip galvanized. Scope Includes delivery to JNPT, Removing of old Bollards, Core Cutting for new and Installing new Anchors using Chemical grouting and final installation of Bollard.

10Supply of V fender (SA 250H or equivalent) of 2m length for Service/Port craft berth having Energy absorption capacity of 4.2 T.M not to exceed reaction of 58.0 T including all required accessories etc.including cost of fender all its accessories, all labour charges, transportation charges up to site and minor tools etc., complete.