PITC

SH 1 Wet Riser System Main Fire Pump a Supplying, installation, testing and commissioning of Electric driven Main Fire Pump conforming to IS 12469 2019 suitable for automatic peration and consisting of following complete in all respects as required. b Horizontal type multistage centrifugal split casing pump of cast iron body and bronze impeller with stainless steel shaft fire pump capable for delivery of 2280 LPM against atotal head of 70 Mtrs Approximately while running at 1450 1500 rpm mechanical seal as required BSNL approved make. c Suitable HP Squirrel cage induction motor TEFC synchronous speed 1500 RPM suitable for operation on 415 volts 3 phase 50 Hz AC supply with IP 55 protection for enclosure horizontal foot mounted type with Class. F insulation conforming to IS 12615 2018. d M.S. fabricated Common base plate coupling,coupling guard, foundation bolts etc. as required. e Suitable cement concrete foundation duly plastered with anti vibration pads Note The head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point.The pump room is situated on the underground water tank. 2280 lpm at 70 m Head

Diesel Driven Pump a Supplying, installation, testing and commissioning of diesel engine driven main fire pump conforming to IS 12469 2019 suitable for automatic operation and nsisting of following,complete in all respects, as required.Diesel Driven Pump. b Horizontal type, multistage, centrifugal pump of cast of iron body and bronze peller with stainless steel shaft, mechanical seal suitable to delivering 2280 LPM against atoatl head of 70 Mtrs Approxi as required.c Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.d M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.e Suitable cement concrete foundation duly plastered and with anti vibration pads.Note The head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point. The pump room is situated on the underground water tank.2280 lpm at 70 m Head

Jockey Pump a Supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to IS 12469 2019 suitable for automatic operation and consisting of following, complete in all respects as required Jockey Pump.b Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required.c Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class F insulation, conforming to IS 12615 2018. d M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads.Note The pump room is situated on the underground water tank. 180 lpm at 70 m Head

Supplying, installation, testing and commissioning of electric driven terrace pump conforming to IS 12469 2019 suitable for automatic operation and consisting of following,complete in all respects, as required Terrace Pump b Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required.c Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class F insulation, conforming to IS-12615 2018. d M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.e Suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m Head

CONTROL PANELS Fabrication supplying Installation testing and commissioning of Electrical control panel of cubical construction floor mounted type fabricated out of 2mm thick CRCA , apartmentalised with hinged lockable doors, dust and vermin proof powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper copper strip, having switchgears and accessories, mountings and internal wiring earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurization pump and diesel pump set complete as per CPWD specification and ATC attached for MAIN FIRE PUMP , JOCKEY PUMP, DIESEL PUMP WITH SYSTEM CONTROLLER AS PER AS PER atc ATTACHED

SITC of fully automatic DOL starter for Terrace pump Terrace Pump siutable for operation on 3 Phase 415 Volt AC supply I/c making inter connection testing etc as requiored at site.

SH II PIPES and ACCESSORIES.Providing laying, testing and commissioning of C class heavy duty MS Pipe conforming to IS 1239/Class -II of IS 3589 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 150 mm Dia

Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 1239/Class II of IS 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 50 mm dia

Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 1239/Class II of IS 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 80 mm dia

Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 1239/Class II of IS 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.100 mm dia