Improvement of discharge 1.00 lac GPH X 122 mtrs. Head HC pumpset of unit no. X and allieds works at CPS Muthi

Amount

Improvement of discharge 1.00 lac GPH X 122 mtrs. Head HC pumpset of unit no. IV at CPS Muthi by way of dismantling the pumping unit from the base frame and then Dismantling of pumpset. Providing and fabrication of pump shaft out of SS material by turning and finishing to bearing size as per sample. Providing / Fitting of 6314 Bearings at DE and NDE of pump. Providing and fitting Shaft Sleeves 2 Nos. (S.S) and check nuts, providing / fitting of Glands with studs on both sides of the pump with nuts. Providing / Fitting of Impeller 1 no. as per sample size. Providing / Fitting Bearing Housing bracket – 1no. Fabrication, providing and fitting of heavy duty coupling pulley set along with coupling bolts and rubber bushes. Providing / Fitting of Neck Rings, Body Bushes and distance bushes two nos. Assembling and Refitting of pump set and proper aligning the pump set after proper greasing and providing Packing material, Job also includes repairs to 200 mm dia Sluice Valve on the suction line and 150 mm dia sluice valve and reflux valve fitted on the delivery line by way of dismantling delivery line by way of cutting of rusted nuts/ bolts with the help of gas cutter ,welding set and other tools and tackles and removal of sluice valve and check valve from their installed position. Repairs to sluice valves by dismantling of turning wheel and damaged worm gear assembly along with top cover by opening / cutting the damaged / rusted nuts and bolts and extracting the damaged flap assembly along with stem rod. Fabrication of stem rod out of MS rod by way of turning, finishing and square threading. Assembling all the parts after providing and fitting of new worm gear assembly and nuts bolts. Repairs to 150 mm dia reflux valve by dismantling of valve and The job involves dismantling the top cover of reflux valve by opening the damaged / rusted nuts bolt and extracting out the damaged flap assembly along with shaft and bushes. Fabrication of flap assembly for reflux valve of CI by casting to shape and turning to require size, making of holes at proper place for fitting of nuts and bolts with packing ring after providing and fitting of MS sheet for packing ring and fabrication as per sample by making holes at proper place. The job also involves repairs to 300 HP HC Motor at CPS Muthi. Job involves disconnecting of all the electrical connections, dismantling of the motor. Extracting out damaged bearings from the damaged bearing brackets. Repair to rotor shaft by re-metalling and turning to bearing size on heavy duty lathe. Complete brazing of the rotor. Fabrication of bearing brackets for DE and NDE out of CI material by casting to shape and turning to bearing size. Providing and fitting of connection plate 01 no and fan 01 no. Coupling the motor with pump, making alignment properly and testing on load at site. The job includes cost of material , labour charges and testing of motor on full load. Complete job.

M.S J K HYDRAULIC ENGGG AND FABRICATOR WORKS

M/S K S ENGG WORKS