CWE/FZR-65/2024-25 SPECIAL REPAIR TO BLDG NO NP-6 (1 TO 6) OR MD ACCN OF FD REGT UNDER GE (WEST) FEROZEPUR CANTT

Amount

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified. Note :- Demolition of Mud puska to be cut in average thickness from top surface of roof for creating the slope as directed

M&L 10 mm thick screed bed or bedding layer of mortar in CM(1:4) with water proofing compound @ 3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane. Note: WPC shall be measured and paid separately

M & L for applying evenly a tack coat of Industrial Bitumen 85/25 at the rate of 1.2 Kg per sqm incl cleaning surfaces as specified & directed by the Engr-in-Charge

M & L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and mini 3 mm thick reinforced with polyster non wove fabric (Wt not less than 150 gm/Sqm ) land on primed surface by forced applicatio complete all as specified

M& L for App Membrane to be finished with two coat of solar reflactive bituminous based aluminium Paint @ 0.1 kg per sqm

Supply only water proofing compound.

M&L for brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement and pointed flush as the work proceeds complete all as specified and directed.

All as per item srl No 8 here in before but using old brick tiles retieved from dismantling under item No 1 here in before including cleaning and removal of mortar from tiles.

M & L Cover fillet in Plain Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate min radius of 75mm tk as in roof and parapet wall junction , roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, incl necessary sloping on roof including form work complete all as specified.

Dismantling of floor hearth and wall tilling incl mortar bedding removing serviceable tiles to store and rubbish off the premises as directed

M & L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and incl screed bedding 15mm thick in cm(1:6),complete all as specified.

M & L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality on vertical surfaces such as in skirting /dado etc area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified.

M&L for glazeded ceramic coloured (colour & shade as approved) tile 450x300x7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white/ coloured cement with pigment to match the colour of tiles complete all as specifide.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in repair of PCC hardstandings /floors and all other similar works complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep complete all as specified

M&L for 75 mm thik Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub floors, sub bases,floors and paving etc. complete all as specified.

M & L for hardcore of gauge n. exc 63mm, deposited spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified..

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and properembedding/ laying of inter locking paver blocks into the sand bedding layer throughvibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for Granite(of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed CM 1:6 complete including moulding at corners and polishing type all as specified and directed

Demolition of un-reinforced cement concrete in any position complete all as specified.

M&L for 50 mm thick Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified.

M & L for 3 mm thick glass dividing stripps,38 mm and inserted in position to confirm to design complete all as specified and directed. width of strip

Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified.

M & L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

All as per item No 25 above here-in-before but using old bricks retrieved from demolition under item No 24 hereinbefore including cleaning and removal of mortar from old bricks.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified.

All as per item No 27 herein before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each and removing to store

Resecuring or easing & adjusting, without taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each

M&L for pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

All as per item No 31 above here-in-before but size 125x60mm with double rebate.

All as per item No 31 here-in-before but size 75x50mm with single rebate.

M&L for cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified.

M & L for cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in bed block of hold fast, coping, including necessary form work complete all as specified.

S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2004).

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Make: Rajshri or equivalent as approved.

S&F for 35mm thick, 2nd class hard wood (Hollock), plain framed, paneled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 complete all as specified.

S&F for 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.

M&L for Medium density fibre board interior grade 18-20 mm thick solid construction type, fixed in repairs in Kitchen cabinets/ CBs doors shutters/ shelves ( horizontal or vertical of any type) on timber frame work /GI Flats orners with screws /nails complete all as specified.

M&L for 0.90 mm thick Decorative laminate type -1, both sides of boards surface finish, (colour and pattern as approved) fixed with approved adhesive as per manufacturer's instructions complete all as specified

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle single composite unit with glazed and gauged shutter both dovetailed or welded and mild steel 8mm size square bar grill welded to frame with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/08 & CEJZ/TD-1020/08.

S&F Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/08 & CEJZ/TD-1020/08

M&L for preparation of shop coated primed steel surfacesof any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified

M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M&L for preparation of old steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified

M&L for preparation of new wooden surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified

M&L for preparation of old wooden surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified

M&L for 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified as in repair.

M&L for aluminium anodised tower bolts 150 mm long and fixed with steel screws complete all as specified.

M&L butt hinges, 75 mm long extruded aluminium alloy with galvanised steel hing pins, anodised and fixed, type C-21 complete all as specified.

M&L for aluminium door handle, cast type, anodised 150 mm long and fixed with steel screws complete all as specified.

S&F Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

M&L 300mm Mild steel helical door spring including roller and roller plate complete all as specified.

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

Mild steel butt hinges 125 mm long medium weight cold rolled with screwed with steel screw or welded to steel frame and fixed with steel screwscomplete all as specified.

75mm size, aluminium (cast type) anodized, handle and fixed with screws complete all as specified.

Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

S & F in repair mild steel 20 mm dia curtion rod powder coated fixed with fancy type chromium plated with bracket complete all as specified.

S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 or Fe 310-O

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for rendering 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair without using extra cement complete all as specified.

M&L for rendering 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and fair without using extra cement complete all as specified.

M&L for rendering 10 mm thick cement plaster on ceiling surfaces in cement mortar 1:3 finished fair and even without using extra cement complete all as specified

Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified.

M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 2mm thick wall care putty complete all as directed.

M&L for preparing newly plastered surfaces of wall and applying 2 coats of distemper oil emulsion over one coat of water based primer over 2mm thick wall care putty complete all as directed.

M&L for preparing old treated plastered surfaces including complete removal of existing treatment and applying two coats of cement base paint complete all as specified.

M&L for preparing newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified

M&L for preparing old plastered surfaces of walls & applying one coats coats of white wash complete all as specified.

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified.

M&L for preparation of old plastered ceiling surfaces and applying one coat of white wash complete all as specified.

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified

M&L for galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

M&L for galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified. (Pipes obtained from item 74 to be reused).

Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified. (Pipes obtained from item 75 to be reused).

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.

S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified.

S&F in repairs chromium plated cast copper alloy 1-way angle cock with flange suitable for 15mm bore pipe, complete all as specified and as directed by Engr -in- charge.

S&F in repairs brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and as directed by Engr -in- charge .

S&F in repairs brass chromium plated long body bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and as directed by Engr -in- charge .

S&F Bib tap of cast copper alloy brass 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S&F in repair Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end)etc suitable for 15mm bore of pipe complete all as specified.

S&F in repair 125mm dia PTMT grating fixed over trap with cement complete all as specified.

S&F in repair 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, as in repair complete all as specified.

S&F in repair Soap dish of CP fixed to wall with steel screws and pvc rawl plug complete all as specified

S&F in repair Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified.

Vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified.

S&F in repairs CP Health Faucet ABS body (Push type) with wall hook and 1.0 mtr SS Braded rubber hose pipe complete all as specified .

S & F in repair sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 mm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F Wall mixture 3 in-1 with provision of overhead shower complete with 115 mm long bend pipe on upper side,connecting legs and wall flange complete all as per manufacturer's instruction and as directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete all as specified and directed

S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm. complete all as specified and directed.

S&F in repair Stainless steel plate rack of standard pattern & of size 900 x 750 x 250 mm.The thickness of stainless steel sheet shall be 1.00 mm & grade of sheet shall be 304 AISI including fixing to wall with 4 Nos 50mm screws & PVC rawl plugs complete all as specified and directed.

Dismantling asbestos cement/PVC pipe including clamps complete all as specified.

S&F in repair 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) bends ad provided with access door complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls

S&F PVC (SWR) bends any radius 75mm dia

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for One light/fan/Bell Point controlled by one single pole one way switch.

ditto all as per item No 104 above but for One socket outlet on the same board controlled by one single pole one way switch

ditto all as per item No 104 above but for One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

ditto all as per item No 104 above but forone three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

Supply & Fixing Switch piano flush type single pole one way 5/6 Amp complete all as directed.

Supply & Fixing Switch piano flush type 15 amps, single pole one way duly ISI marked.

Supply & fixing Socket outlet 2 in one , 5/6 Amps flush type ISI marked.

Supply & Fixing Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked.

Supply & Fixing bell push flush type 5 Amps duly ISI marked.

Supply & Fixing ceiling rose, PVC/Polycarbonate,isolated three terminals.

Supply & Fixing Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb omplete all as specified and directed.

Supply & Fixing bell ding dong type AC 230 Volt single pole.

S & F in repair stepped type electronic fan regulater flush type on the existing phenolic laminated sheet etc. as reqd complete all as specifed and directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm

S&F LED tube light fitting 1 X 18 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LHEXBLP7UN1W018 Make - Havells or equivalent to Crompton/Bajaj/Philips

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified

Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

Supply & Fixing MCCB 100 Amps, 415 volts, 16 KA, 4 Pole complete all as specified.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.

Supply and fixing SPN 32 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified.

Sheet Metal Enclosures with Socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amp complete all as specified and directed.

Supply & Fix in repair sub main wiring of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed. Note: Two run of single core 4 sqmm cable and one run single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).

M & L for sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run)

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)

Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 core complete all as specified and direced by Engr-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 meter in depth for taking out and laying UG cable and getting out, excavated earth, forming bottom surfaces to required level complete all as specified and directed.

Material and labour for sand cushioning with a layer of fine sand 8 cm thick begore laying of cable and 15 cm thick after laying of cable in trenches complete all as specified and as directed by Engineer-in-Charge. Notes : (i) Excavation and earth work to be measured and paid separately). (ii) Thickness of 18 cms after punning shall be considered for payment.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified.

Removing excavated material n exc. 50m and depositing where directed at a level n exc.1.5 m above the starting point complete all as specified and direced by Engr-in-Charge.

M & L Bricks (Size 23x11.5x7.5 cm) common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of UG cable complete all as specified and direced by Engr-in-Charge.

M & L Mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc as required all as specified.

Vee Vee Enterprises (BID ID -3278233)

M/S Yashpaul Gulati (BID ID -3277923)

B.L. Chaudhri and Co. (BID ID -3278103)

KAMALJIT SINGH CONTRACTOR (BID ID -3278124)

M/s Bansi Lal (BID ID -3278112)

Karan Engineers (BID ID -3278413)

manoj and company (BID ID -3278600)