Construction of 22 Boys or Girls Hostel Under Pradhan Mantri Dharti Abha Janjatiya Gram Utkarsh Abhiyan PM DAJGUA Scheme.

Amount

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means.

a. Lift upto 1.50m

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means

b. Lift from 1.50m to 3.00

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavate dmaterial upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming, watering including shoring and strutting etc. complete.(Lift from 1.5m To 3.0m.) By Mechanical Means

Lift from 1.50m to 3.00

Excavation for foundation Hard-rock by blasting including trimming and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps with in a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete.(Lift from 1.5m To 3.0 m) By Mechanical Means

b. Lift from 1.50m to 3.00

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20cm including watering and compaction etc. complete.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15cm to 20 cm thick including hand packing and compacting etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying in situ /Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mildsteel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Providing water proofing in W.C. and bath including B.B. Coba in all position consisting of specialised approved waterproofing compound and materials as per manufacturers specifications and covering 10 years guarantee…

Providing waterproof plaster in W.C. and bath 12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) (As directed by Engineer in Charge)

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete.

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.

Providing and laying handcut polished Kotah Stone flooring 25mm to 30mm thick and 30cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.

Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring

A) For Flooring

i) 600mm x 600mm size

B) For Dado & Skirting

i) 600mm x 600mm size

Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. b) Both side polish

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m)

Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete.

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.

B) Two Coats

ii) For New surface

Providing and applying exterior emulsion water based water proof cement paint of approved colour and shade to exterior old/new surface in two coats including scaffolding..

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc

Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983).

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box

Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. b) With powder coating Note While arriving at the rate of item of item weight at 6.90 kg/Sqm is considered.

b) Power Coated

a) 20 kg/ Sqm

Providing Preconstruction Antitermite treatment by treating the bottom surface and side of excavation at the rate of 3 litres of an emulsion concentrate of one percent concentration of CHLORPYRIFOC 20% EC ISI approved..

Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kg/Smt.

Electrification

Supplying and erecting UPVC reinforced flexible conduit 25 mm in dia. conforming to I.S. and approved make with required number ofcouplings, PVC bushes, check nuts etc. complete.

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No:

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification No:

Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BWG(EARTH WIRE)AS per note no-2

Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(EARTH WIRE))AS per note no-2

Supplying and erecting ISI mark Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendent holder bakelite base 6A. erected on Filled polypropylene ISI marked (IS:14772-2000) board or polished double wooden block/ ISI mark PVC junction box.

Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete

Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type indicator lamp ISI mark approved make duly erected on provided plate and box with wiring connections complete

Supplying and erecting modular type 6 / 16A fuse unit ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type electronic dimmer 600/650W two module ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular switch box with double mounting & front plate for 8 module complete duly connected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected in an approved manner.

Wiring for plug on board with Switch socket with copper wiring and earthing as per specification No:WG-PW/SW(Modular As.Per Note.No-6)

Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm FR grade copper wire with Modular type switch and required accessories as per specification No: WG-PW/SW(Modular As.Per Note.No-6)

Point wiring fan in PVC trunking (casing-capping) with 1.5 sq.mm FR grade copper wire with Modular type switch and required accessories as per specification No: WG-PW/SW(Modular As.Per Note.No-6)

Supplying & erecting 0.5W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying & erecting 5W-8W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying & erecting ready to use retrofit T8 LED 18-20W tube light with heat sink, integrated HF electronic driver complete & compatible to T8 (36W) / T12 (40W) luminaire by disconnecting starter & ballast if necessary.

Supplying and erecting Ding Dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size

Supplying and erecting 1 light fancy wall bracket with arm fabricated from brass duly lacquered with suitable holder and fancy glass shade duly wired erected on wall with suitable size of polished wooden / laminated board.

Supplying and erecting Decorative pre-wired box type fitting/batten suitable for 4' T8 LED tube light (Excluding tube light)

Supplying and erecting Street light bracket made from 25 mm. dia ‘B’class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm lengthand 80 mm dia duly welded with provided leads as per specification no.FG-BKT/BPC

Supplying and erecting LED street light fitting suitable above 26W to 36W lamp, including lamp, with PF > 0.95 class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink extruded alluminium complete as per specification No FG-O

Supplying and erecting fan hook box of 10 mm M.S. round barbounded to the R.C.C. bars upto 50 mm length each side andpierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia.or equivalent square size and having depth upto 75 mm completeerected with duly painted by one coat of red oxide paint and two coatsof paint erected in position and without any leakage of slurry of cementconcrete on either side of the box and positioned to the bottom level ofthe slab.

Supplying and erecting regular/ standard model Ceiling fan of 1400mm. sweep complete erected in position as per specifcation no. FG-

Supplying and erecting Exhaust fan heavy duty 230 V, A.C. 50 cycles375/380 mm. 900 RPM complete erected in position as per specifcationno. FG-FN/EXF

Supplying, erecting, testing and commissioning self contained water cooler 230/250 V 50 cycles nominal cooling capacity of 150 liters per hour and storage capacity 150 liters as per specification no. AP-WCR/WC

Supplying and erecting ultra violet storage type water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water 0.33 Ltr/min with activated carbon filter and softener operating on 230 V single phase A.C. supply.

Supplying & Installing, Testing & Commissioning of Solar water heating system without heat exchanger type of 500 LPD capacity as per specification No. ESD-SHWS

Supplying and erecting double pole metal /iron clad switch with H.C. type fuse and neutral link 250V, 32A on iron frame/board as per specification No. SW-SWR/MDP

Supplying and erecting Triple pole metal/ iron clad switch & fuse 415/ 500V 32A on iron frame/board as per specification No. SW-SWR/MTP

Supplying & erecting Four pole Iron clad/metal clad ON LOAD change over switch 63A, 415/500V erected on angle iron frame approved make.

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB

Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB

Supplying erecting and marking Four pole isolators on switch version of miniature circuit breakers of 63A in provided distribution board.

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 ways, on iron frame/laminated board.(Horizontal type) as per specification No. SW-SWR/MCBDB

Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron frame /laminated board as per specification No. SW-SWR/MCCB

Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting,bending, drilling, welding, rivetting etc. treated with anti-rust treament and duly power coated or painted with one coat of red lead paint and 2 coats of enamel paint as directed.

Supplying and erecting panel mounting type digital ammeter having Three and half digit LED display, external C.T. operated, calibrated for suitable to operate on 500V 0to1000A ACAC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Providing and erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio with 15VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

Supplying & erecting LED type indicating pilot lamp with LED colour BLUE, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.

Supplying and erecting bank of All Polypropylene kVAR condensors (APP type) with the standard capacities of 2,3,5,7,10,12.5 and 15 kVAR units of P.F. correction for operation on 3 phase 50 cycles 400/440V. (+10%) with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee.

Supplying, erecting & terminating PVC armoured cable 4 core 10 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating PVC armoured cable 3½ core 25 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing earthing with Galvanised cast iron earth platesize 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification No. EA-EP

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification No. EA-EP

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. as per specification No (EA-EP).

Supplying and erecting G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP).

Supplying and erecting Centrifugal water pump Monoblock), 415V, three phase 50 cycles A.C.supply of 3 HP with discharge 2 /4.9 Liters per second (LPS) for head of 14/36 and 50 mm suction/ 40 mm delivery pipe on provided c.c. foundation as per specification No. WP-CGP

Supplying and erecting D.O.L. Starter 400V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply for 10 H.P. (Similar to L & T make MN-16 DOL Model)

Making trench in soft soil of suitable width and depth as per IS for laying provided L.T cable up to 25 sq mm complete. As per specification No. CW-EXN-CTR

Supplying and erecting ISI mark G.I.pipe 40 mm. dia. ‘B’ class at position with accessories. As per specification No. CW-PLB/GP

Supplying and erecting ISI mark G.I.pipe 50 mm dia.‘B’ class at position with accessories. As per specification No. CW-PLB/GP

Supplying and erecting 50mm dia. Gun metal foot valve at position with necessary materials.

Supplying and erecting 50mm dia. cast iron foot valve at position with necessary materials.

Supplying and erecting Non return valve 50mm dia in position made of gun metal.

Supplying, erecting, testing and commissioning of Diesel generating set with standard control Panel with alternator of 5 kVA continuous rating, single Phase, 230V, 50c/s 0.8 p. f. AC supply a totally enclosed air / liquid cooled multi cylinder diesel engine developing suitable BHP at 1500 rpm with 10%overload for 1 hour in 12 hours with standard accessories, self-excited, selfregulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption of 1.3 Ltr/hr @75% loading. Engine and alternator directly coupled on a common fabricated steel base plate with anti-vibrating pad, with control panel comprising of standard meters, switchgears, indicators connected with suitable wires/cables. The complete set enclosed in acoustic enclosure made of 18 SWG CRCA sheet, sound absorbing material, rockwool covered from inside with ¾ mm holes perforated sheet to restrict sound level up to 75 dB at 1.0 m. The engine with first filling of oil, diesel not less than 13 Ltr etc. on provided M20 Grade CC Foundation as per specification no. GEN-DG

Plumbing

Providing and laying in trenches heavy grade having embossed ISI Mark 50 mm diameter galvanised iron pipes with screwed sockets, joints, necessary galvanised iron fitting such as sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps etc. including necessary drilling hole in walls, slabs etc. and remarking good the demolished portion to restore the same in original condition neatly, testing etc. complete. (Prior approval of sample and brand by Executive Engineer is necessary before use) As per SSR 2022-23 Item No. Spec. No.41.15 Bd V.5 Page No. 267

Providing & fixing on walls/ceiling /floors, medium grade having embossed ISI Mark 32 mm diameter galvanised iron pipes with screwed sockets, joints, necessary galvanised iron fitting such as sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps etc. including necessary drilling holes in walls, slabs etc. & remarking good the demolished portion to restore the same in original condition neatly, testing etc. complete. (Prior approval of sample and brand by Executive Engineer is necessary before use As per SSR 2022-23 Item No. Spec. No.41.13 Bd V.5 Page No. 267

First Floor

Providing & fixing on walls/ceiling /floors, heavy grade having embossed ISI Mark 40 mm diameter galvanised iron pipes with screwed sockets, joints, necessary galvanised iron fitting such as sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps etc. including necessary drilling holes in walls, slabs etc. & remarking good the demolished portion to restore the same in original condition neatly, testing etc. complete. (Prior approval of sample and brand by Executive Engineer is necessary before use) As per SSR 2022-23 Item No. Spec. No.41.14 Bd V.5 Page No. 267

First Floor

Providing and laying in trenches medium grade having embossed ISI Mark 15 mm diameter CPVC pipes with screwed sockets, joints necessary fitting such as sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps etc. including necessary drilling hole in walls, slabs etc. and remarking good the demolished portion to restore the same in original condition neatly, testing etc. complete. (Prior approval of sample and brand by Executive Engineer is necessary before use) As per SSR 2022-23 Item No. Spec. No.42.55 Bd V.5 Page No. 280

First Floor

Providing and laying in trenches medium grade having embossed ISI Mark 20 mm diameter CPVC pipes with screwed sockets, joints necessary fitting such as sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps etc. including necessary drilling hole in walls, slabs etc. and remarking good the demolished portion to restore the same in original condition neatly, testing etc. complete. (Prior approval of sample and brand by Executive Engineer is necessary before use) As per SSR 2022-23 Item No. Spec. No.42.56 Bd V.5 Page No. 280

First Floor

Providing and laying in trenches medium grade having embossed ISI Mark 25 mm diameter CPVC pipes with screwed sockets, joints necessary fitting such as sockets, back nuts, elbows, bends, tees, reducers,enlargers, plugs, clamps etc. including necessary drilling holes in walls, slabs etc. and remaking good the demolished portion to restore the same in original condition neatly, testing etc. complete. (Prior approval of sample and brand by Executive Engineer is necessary before use) As per SSR 2022-23 Item No. Spec. No.42.57 Bd V.5 Page No. 280

First Floor

Providing and fixing screw down 15 mm dia. bib/stop tap of brass including necessary socket union nut, testing etc. Complete (Prior approval of sample and brand by Executive Engineer is necessary before use) As per SSR 2022-23 Item No. Spec. No.41.40 Spec. No. : Bd. V. 8 Page No. 270

First Floor

Providing and fixing 25 mm screw down wheeled stop tap of brass including necessary socket union nut, testing etc. complete (Prior approval of sample and brand by Executive Engineer is necessary before use) As per SSR 2022-23 Item No. Spec. No.41.42 Spec. No. : Bd. V. 9 Page No. 270

First Floor

Providing and fixing 32 mm screw down wheeled stop tap of brass including necessary sockets union nut, testing etc. complete (Prior approval of sample and brand by Executive Engineer is necessary before use) As per SSR 2022-23 Item No. Spec. No.41.46 Spec. No. : Bd. V. 9 Page No. 270

First Floor

Providing and fixing 50 mm screw down wheeled stop tap of brass including necessary sockets/ union nut, testing etc. complete (Prior approval of sample and brand by Executive Engineer is necessary before use) As per SSR 2022-23 Item No. Spec. No.41.48 Spec. No. : Bd. V. 9 Page No. 270

Providing and fixing 45 cm wide steel ladder of 40mm x 6mm mild steel flat stringers and steps of 18 mm dia mild steel bar for water tank including fixing it in 1:2:4/M-15 cement concrete block 60cm x 30cm x 30cm & painting the ladder with three coats of oil painting etc. complete.As per SSR 2022-23 Item No. Spec. No.41.56Spec. No.: Bd.V.19 Page No. 271

Providing and fixing 1st class “Orissa type” colour glazed earthenware 600 x 400mm W.C. Pan including ‘P’ and ‘S’ trap, UPVC soil and vent pipe up to the out side face of wall, including 100 mm dia. UPVC plug bend, 10 litre UPVC high level flushing cistern with fittings, inlet pipe with stop tap, brackets, 32 mm dia. UPVC flush pipe with fittings and clamps, 20 mm dia. UPVC over flow pipe with mosquito proof coupling, UPVC chain and pulley painting to cistern and exposed pipes, cutting and making good to the walls and floors, testing etc. Complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use).As per SSR 2022-23 Item No. Spec. No.42.33 Spec. No.: Bd.V. Page No. 277

First Floor

Providing and fixing European type white glazed earthenware W.C. Pan for handicap with Bakelite seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe upto the outside face of wall, 10 litre enamelled low level flushing cistern with fittings, pipe and stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps,20 mm dia UPVC overflow pipe, mosquito proof couplings, cutting and making good to the walls and floors, testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use)As per SSR 2022-23 Item No. Spec. No.42.33 Spec. No.: Bd.V. Page No. 277

First Floor

Providing and fixing white glazed earthenware Wash Hand Basin of Size 55 x 40 cm. including pillar tap, brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including UPVC Waste pipe and UPVC bottle trap upto the outside face of the wall making good damaged surface, testing etc. complete.As per SSR 2022-23 Item No. Spec. No.41.63 Spec. No. : Bd. V. 30 Page No. 272

First Floor

Providing and fixing P.V.C. long arm Nahani Trap of 8 cm diameter including PVC grating, bend and connecting piece of UPVC pipes upto the outside face of the walls making good damaged surface, testing etc. complete. As per SSR 2022-23 Item No. Spec. No.41.79 Spec. No. : Bd. V. 32 Page No. 273

First Floor

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592- 1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. As per SSR 2022-23 Item No .42.87 Spec. No. : Bd. V. Page No. 283

First Floor

Providingandfixing75mmdiastabiliserpipe/P.V.C.soilvent/wastepipeandwithnecessaryfixturesandfittingsuchasbends,tees,singlejunctions,slottedvent,clamps etc. complete As per SSR 2022-23 Item No. 42.51 Spec. No. : Bd. V. Page No. 279

First Floor

Providing and laying for 150 mm dia salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. As per SSR 2022-23 Item No. Spec. No.42.04 Spec. No. : Bd. V.39 Page No. 274

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including connecting glazed stoneware pipe, brick masonry chamber with R.C.C. lid and symet grating for the gully trap testing etc. complete.As per SSR 2022-23 Item No. Spec. No.42.02 Spec. No. : Bd. V. 38 Page No. 572

Providing and laying 225 mm dia salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. As per SSR 2022-23 Item No. 42.05 Spec. No. : Bd. V.39 Page No. 274

Providing & constructing Brick Masonry Inspection Chamber 60cm x 45cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight 75 mm thick R.C.C. cover etc. complete. As per SSR 2022-23 Item No. 42.10 Spec. No.: Bd. V. 43 Page No. 274

Providingandfixingscrewdown15mmdia.wheeledstoptapofbrassincludingnecessary sockets/union nut complete As per SSR 2022-23 Item No. 41.43 Spec. No.: Bd. V. 9 Page No. 270

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.As per SSR 2022-23 Item No. Spec. No.42.52 Spec. No.: Bd. V. Page No. 279

First floor

Providing and fixing 450mm.× 550mm. size approved quality mirror with fixtures and fastenings etc. complete. Additional Item. Spec. No. As directed by Engineer in chargeAs per SSR 2022-23 Item No.42.20 Spec. No.: Bd. V. Page No. 275

First Floor

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. Additional Item. Spec. No. As directed by Engineer in charge.As per SSR 2022-23 Item No. .42.31 Spec. No.: Bd. V. Page No. 277

First Floor

Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litresAs per SSR 2022-23 Item No. Spec. No.42.54 Spec. No.: Bd. V. Page No. 280

Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick batsAs per SSR 2022-23 Item No. Spec. No.42.19 Spec. No.: Bd. V. 46 Page No. 275

Royalty

Testing Charges

Add Insurance 1%

Add Labour Cess 1%

Tirupati Construction Company (BID ID -7069459)

M/s. Star Construction Company, Aurangabad (BID ID -7076224)