Providing and fixing of High Mast light on 4 nos poles from main entrance to gate no.2 (College wing-1) at MAMC Agroha

Amount

Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. (HSR 24.1.3)

Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. (HSR 24.1.5)

Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required. ( HSR 24.1.7)

Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. (HSR 24.1.8)

Laying of underground cable 0.75 metre below ground level covered with sand and bricks including excavation and refilling of trenches.:- 16 Sq mm to 35 sqmm 2 to 4 Core (HSR 24.2.2.2)

Laying and fixing of cable on surface/ cable tray etc as required:- 16 Sq mm to 35 sqmm 2 to 4 Core (HSR 24.2.5.2)

Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 35 sqmm (HSR 24.2.8.6)

( HSR 24.2.7.3) Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core ( HSR 24.2.7.3)

HSR-24.5.2 S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work.HSR-24.5.2.3 DWC/HDPE pipe 63/50 mm outer dial inner dia

HSR 23.22.1 Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work.HSR 23.22.1.9 4 pole MCCB 6amp to 100amp, 25KA

HSR 23.22.2 MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings HSR 23.22.2.1 MCCB up to 125A FP

Supply and erection of cable route marker made of 50 cm long 10 mm dia M.S. Rod welded/riveted at the top with 10 cm dia 3 mm thick MS plate inscribed with 'cable' word on it, having a cross arm 30 cm long of the same dia welded at the bottom, in exiting trench 45 cm below ground level. (HSR 24.2.10)

Supply, installation, testing and commissioning of 12.5 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 6 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer -in-Charge Thickness of Top and Bottom Section = 3 mm (minimum) Top Dia = 150 mm and Bottom Dia = 360mm Thickness of Galvanization - Top = 65 micron (minimum) and Bottom = 85 micron (minimum) (HSR 24.4.15.1)

RCC FOUNDATIONS FOR HIGH MAST OCTAGONAL POLES Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 75 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for high mast octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 12.5 m high mast pole (HSR 24.9.1)

NS Item- Suplply, erection, testing and commissioning of 3 phase Automatic timer AMSons/Land/Indoasian/Cand make to ON/OFF the street light on different fixed timing maintainable on stret light pedestal, pillar, wall M.S. Pedestal where ON/OFF point is available, cabinest is fabricated from 22 gauge, painting, wiring, connection ON/OFF from bottom of the cabinet, 3 contractors 25 Amp, 24 volts D.C. each 2 transformers, rectifier system, switching system, Bakelite contractor, 32 Amp. MCB, 32 amp Havells digital timer Auto/Manual system, time setter, fiber sheet, rubber,and plastic component, wiring and component fitting, chemical (Epoxy) the job includes allied matirial, labour, erection, testing and commission at site including cost of material complete in all respect up to the entire satisfaction of Enginner-in- Charge.

NS Item- Supply of L.T.Cable 3.5x35 Sq mm Aluminum armoured cable Make- Polycab,Havells, KEI

NS Item- Supply and erection of hot dip galvanized single / double arm bracket (totally GI) with each arm of 50mm dia MS pipe 1.5 mtr long (3.5mm thick) dully welded with 450mm long 3mm thick of octagonal canopy of suitable dia (3mm thick) with angle of inclination 105 degree of verticle. The top and the canopy should be closed with MS sheet of 16 SWG. The bracket and canopy be supported with a brassing pipe GI 1400mm long , 25mm dia MS pipe (2mm thick) including the cost of cutting , welding all labour and material required to complete the job. (N.S-1) (a) Single bracketTotal

NS-1 Supply, installation, testing and commissioning of following LED street light 90 watt fixture IP-65/66 level protected including making connection and erection of same on exsiting pole/ bracket irespective of height pole/mounting height with cost of all labour and materials required to complete the job. Make- Finolex/ Havells/ Crompton/ Orient/

Supply and eraction of 250watt LED Flood Light 6500K LED Light Fixiture Made of pressure die cast almunium back chowk housing with front opening toughened glass with subitable lens for uniform distrbuting of light having IP 66 protection high power LED potted IP 65 driver used in side with 6Kva protection with 3Year warranty Make- Havells, Crompton, Orient,

N.K.Enterprises

N D ELECTRICAL

THE ROHINI COOP L&C SOCIETY LTD.

SANDEEP KUMAR CONTRACTOR