Supply of electrical Materials for Day to Day maintenance of EI at Zonal Office Building, 16, Rajpur Road, Civil Line Zone.

Supply of 1.5 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable.

Supply of 2.5 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable.

Supply of 4.0 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable.

Supply of 6.0 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable.

Supply of 10.0 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable.

Supply of 16.0 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable.

Supply of 25 mm dia ISI marked, PVC conduit

Supply of S.P. 5/6 amps, one way modular switch, ISI marked

Supply of S.P. 15/16 amps, one way modular switch, ISI marked

Supply of 3 pin 5/6 A, modular socket outlet, ISI marked

Supply of 6 pin 15/16 A, modular socket outlet, ISI marked

Supply of 3 pin 5/6 Amp socket outlet piano type ISI marked.

Supply of Call bell/ buzzer, single phase

Supply of 25 A modular SPMCB, 'C' curve

Supply of 6 A, to 32 A, ratings, SP MCB, "C" curve, 10 KA breaking capacity

Supply of 6 A, to 32 A, ratings, SPN MCB, "C" curve, 10 KA breaking capacity

Supply of 63 A, 2 pole isolator

Supply of 63 A, 4 pole isolator

Supply of 100 A, 4 pole isolator

Supply of 100 A, 16KA, TPMCCB, Ics=100% Icu and Operational Voltage 690V

Supply of 125 A, 16KA, TPMCCB, Ics=100% Icu and Operational Voltage 690V

Supply of 150 A, 16KA, TPMCCB, Ics=100% Icu and Operational Voltage 690V

Supply of 200 A, 25KA, TPMCCB, Ics=100% Icu and Operational Voltage 690V

Supply of 250 A, 25KA, TPMCCB, Ics=100% Icu and Operational Voltage 690V

Supply of 400 A, 35KA, TPMCCB, Ics=100% Icu and Operational Voltage 690V

Supply of 40 A, rating, 2 pole RCCB, 30mA.

Supply of 63 A, rating, 4 pole RCCB, 30mA

Supply of sheet steel DP MCB enclosure

Supply of sheet steel TP MCB enclosure

Supply of 9 Watt LED retrofit lamp suitable for B22 holder

Supply of 15'' inch (380 mm) sweep 1400 rpm exhaust fan Heavy duty complete with shutter blades etc. as required.

Supply of 250 mm (10 inch) sweep 1250 rpm exhaust fan Fresh Air Type complete with shutter blades etc. as required.

Supply of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as reqd. 1200mm, BEE 5 star rating, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)

LED Batten light (System lumen efficacy >135 lm/Watt)Supply of LED surface mounted Batten light of following body material and construction as per IS :10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI ≥80, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing complete in all respect. As required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness ≥ 1.20 mm) (C) 36 Watt

LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy >135 lm/Watt) Supply of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50°C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66, IK 10, CRI ≥70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect. As required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 150 Watt