Loading…
Loading…
Tender Value
₹1.0 L
EMD Value
₹2,544
Closing Date
28 Apr 2025, 8:30 pmClosed
Rural Development and Panchayat Raj Department
Construction of a borewell motor board mission room near Bhadra canal in Bannikodu village
RDPR/2024-25/OW/WORK_INDENT13487/CALL-2
RDPR/2024-25/OW/WORK_INDENT13487/CALL-2
Open
Other Works
Two Tender Document System(Two Cover)
RDPR Gram Panchayat Office Bannikodu TP Honnali
₹500
₹2,544
16 Apr 2025
16 Apr 2025
29 Apr 2025
28 Apr 2025
Construction of a borewell motor board mission room near Bhadra canal in Bannikodu village
Earth work in surface excavation by mechanical means for lowering &leveling the ground for allworks other than foundatson in all kinds ofsoils &upto depth not exceeding 300mm as per drawing and techni...
Earth work excavation for Foundation by mechanical means for allworks& depth upto 3 m, as per drawing and technicalspecifications, including setting out shoring strutting, barricading. caution lights,...
Providing Filling in foundation with granite trap broken metal 100mm and down size with approved sand mcluding hand packing, rammming, watering mcluding cost of all materials and labour with lead up t...
Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. Thegranite/trap/basaltcrushedgraded coarse aggregatesand fine aggregatesas per relevant IS Codes...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1.6 (1 cement 6 course sand) [P.No-9,1.No-5.4 (PWD SR 2023-24)Volume-2
Providing and laying in Reinforced cement concretefor all Basement & surface level works. return walls, retaining walls, sunken floors etc. Thegranite trap basalt crushed graded coarse aggregates and ...
Providing and laying in position Reinforced cement concretefor all Super structures of building Roadworks, Waterworks, Irrigationworks& super structure works of bridgesupto 3.50 m height. Thegranite/t...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x2000mm having block density more than 1800kg/m3 and cainimum compressive strength of 4.00 N/mm2 conforming to IS...
Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members ...
Providing and fixing Imm thick MS. sheet door with frame of 40x40x6 mm angle iron and 3 man M.S. gusset plates at the junctions and comers, all necessary fittings complete, including upplying a primin...
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side top centre hung, with beading and all members such as F7D,F4B, KII B and K12 B etc. complete of standard ...
Providing 1.5 mm cement plaster on the rough side of single or half brick wall of mux 1:4 (1 cement: 4 firie sand) including rounding off comers wherever required smooth rendering. providing and remov...
Providing 20 mm cement plaster of mix 1:4 (1 cement 4 fine sand) to brick/stone masonary including rounding off comen wherever required smooth rendering, providing and removing 13 scaffolding, includi...
Distempering with old bound washable distemper of appeared brand and sofacture to gove an even shade New work (two cot) over and uncluding water thinsable priming cost with coment primer after thoroug...
Fimshing walls with with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surfac...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and fore...
Providing and fixing Steel work in built up tubular (round, square orrectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 gra...
Supplying heavy gauge PVC Conduit piipe dia. mm thick with sustable size bends, metal junction boxes adhesive paste ete by groove cutting in the wall and fixing by bracing U or J hooks and cement plas...
Groove cutting Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of conduit/GI pipe and plastering, finishing upto wall surface complete. (P-2, INo.-20 1.7.1) (ELE S...
Add Miscellaneous and rounding off
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .