Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹4.8 LAccepted-Finance | L-1 | Accepted-Finance TENDER ACCEPTED DUE TO LOWEST BIDDER |
Tender Value
₹4.5 L
EMD Value
₹9,045
Closing Date
30 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER
Executive Engineer (Civil) BSNL Civil Division IInd Floor TE Building Raptinagar Gorakhpur
Day to day Building maintenance work under OA Mau for the period of Twelve months
2023_BSNL_154798_1
01/2023-24/BSNL/CD/GKP
Open Tender
Civil Works
Item Rate
365 days
MAU
2 documents required · 2 mandatory
₹590
Accounts Officer (Cash) BSNL O/o GMTD Gorakhpur
₹9,045
28 Jun 2023
20 May 2023
2 Jun 2023
20 May 2023
30 May 2023
20 May 2023
20 May 2023 - 30 May 2023
Amount
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared.
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
a) 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size)
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement, with1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mmnominal size).
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.
a) Thermo-Mechanically Treated bars of grade Fe-500 D or more.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
a) Cement mortar 1:6 (1 cement : 6 coarse sand)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
a) Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :
a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :
a) 20 mm dia (heavy type)
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.
a) 250 mm weighing not less than 150 gms.
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
a) 100X58X1.90 mm
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete.
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete.
a) Single rubber stopper
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer-in-charge.
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
a) 40 mm thick with 20 mm nominal size stone aggregate
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.
a) New work (two or more coats) over and including water thinnable priming coat with cement primer.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead :
a) With cement mortar 1:4 (1 cement : 4 fine sand).
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
a) Float glass panes of thickness 4 mm.
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead.
Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska :
a) With F.P.S. brick tiles
Providing and fixing Stainless Steel A Isis 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
a) Kitchen sink without drain board
(i) 610x460 mm bowl depth 200 mm.
Providing and fixing white vitreous china water closet squatting pan (Indian type) :
a) Orissa pattern W.C. pan of size 580x440 mm
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
a) 10 litre capacity - White
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :
a) Black solid plastic seat with lid
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :
a) Flat back wash basin of size 550x400 mm.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
a) Semi rigid pipe
(i) 32 mm dia
(ii) 40 mm dia
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
a) Rectangular shape 453x357 mm
b) Oval shape 450x350 mm (outer dimensions)
Providing and fixing soil, waste and vent pipes :
a) 100 mm dia.
(i) Sand cast iron S&S pipe as per IS: 1729.
b) 75 mm diameter :
(i) Sand cast iron S&S pipe as per IS: 1729.
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :
a) 75 mm dia pipe
b) 100 mm dia pipe
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :
a) For 100 mm dia. Pipe
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
a) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall
a) 15 mm nominal outer dia. Pipes.
b) 20 mm nominal outer dia. Pipes.
c) 25 mm nominal outer dia .Pipes.
d) 32 mm nominal outer dia. Pipes.
e) 40 mm nominal outer dia. Pipes.
f) 50 mm nominal outer dia. Pipes.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work
a) 15 mm nominal outer dia. Pipes.
b) 20 mm nominal outer dia. Pipes.
c) 25 mm nominal outer dia .Pipes.
d) 32 mm nominal outer dia. Pipes.
e) 40 mm nominal outer dia. Pipes.
f) 50 mm nominal outer dia. Pipes.
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall.
a) 15 mm dia. nominal bore
b) 20 mm dia. nominal bore
c) 25 mm dia. nominal bore
d) 40 mm dia. nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
a) 25 mm nominal bore
b) 40 mm nominal bore
Providing and fixing uplasticised PVC connection pipe with brass unions :
a) 45 cm length
(i) 15 mm nominal bore
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
a) 100 mm diameter
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :
a) 15 mm nominal bore.
b) 20 mm nominal bore.
c) 25 mm nominal bore.
d) 40 mm nominal bore.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
a) 15 mm nominal bore
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
a) 15 mm nominal bore.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
a) 15mm nominal bore
Providing and fixing PTMT bib cock of approved quality and colour.
a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms.
Providing and fixing PTMT stop cock of approved quality and colour.
15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.
Providing and fixing PTMT pillar cock of approved quality and colour .
15mm nominal bore, 107 mm long. Weighing not less than 110 gms.
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
a) 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms.
b) 25 mm nominal bore, 152 mm long. Weighing not less than 440 gms.
Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms.
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.
a) 15 mm nominal bore. Weighing not less than 32 gms.
b) 20mm nominal bore. Weighing not less than 40 gms.
c) 25mm nominal bore. Weighing not less than 62 gms.
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
a) With stainless steel cover plate minimum 1.25 mm thickness.
Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge
a) Anodized (AC 15 ) aluminium
Repairing wherever required of bib cock, pillar cock, stop cock G.I. waste pipe and other fittings of C.P. & brass etc.
Repairing of leaking of toilet joint with P trap, floor traps, rain water pipes low level and high level cisterns.
Repairing of leaking in SCI pipes immediately i/c the cost of sealing material such as jute & cement etc.
P/F G.I. nipple to existing water line all complete as per direction of Engineer-in-charge.
a)15mm nominal bore.
i)50mm size.
ii)100mm size.
iii) 150mm size
b)20mm nominal bore:
i)50mm size
ii)100mm size.
iii) 150mm size
P/F G.I. nipple for PVC tank all complete as per direction of Engineer-in-charge..
a)15 mm nominal bore.
b)20mm nominal bore.
c)25mmnominal bore.
Repairing of wooden door/ window frames and shutters with part replacement of wood work wherever required after taking out the shutter i/c cost of wood replaced as per direction of Engineer-in-charge, repair at each location of shutter shall be treated as one job).
Repairing of Aluminium door/ window frame and shutter with required cleat screws after taking out the shutter i/c cost of labour etc. all complete as per direction of E-in-C.
Providing and fixing of pivot in aluminium door shutter etc. all complete as per direction of E-in-C.
Providing manual assistance for plumbing sewer, masonry & carpentry work which are not covered in scheduled items and are not possible to measure.
P/F 26 gauge aluminium sheet i/c necessary nails etc. complete as per direction of Engineer-in-charge.
Providing Spandle for repairing of piller cock wherever required.
P/F PVC inlet connection for flush pipe connecting with W.C. pan .
P/F C.P. brass waste Jali for sink or wash basin.
a) 32 mm dia
P/F PVC cover to over head PVC water storage tank i/c necessary nuts & bolts.
P/F stainless steel jail (grating) with or without hole for waste pipe for floor/Nahani trap.
a) 75 mm dia weight not less than 70 gms.
b) 100 mm dia weight not less than 100 gms.
Cleaning of Manhole with connecting sewer line and disposal of malva out side compound etc all complete as per direction of E-in-C.
Providing assistant for for day to day maintenance purpose.
P/F PVC Cistern flush handle Of required colour and shape.
P/F G.I. Elbow in existing water line all complete as per direction of Engineer-in-charge.
a)15mm nominal bore.
b)20mm nominal bore.
c)25mm nominal bore.
P/F PVC Ball valve to pvc low level flushing cistern.
P/F PVC Syphon to pvc low level cistern all complete as per direction of Engineer-in-charge.
P/F gun metal gate valve with C.I. wheel of approved quality(screwed end):
a)20mm nominal bore.
P/F G.I. Tee of approved make in existing water line.
a)15mm nominal bore.
b)20mm nominal bore.
C) 25 mm nominal bore
P/F MS bracket 40x40x5mm of size 40 cm. for fixing of wash basin and making good the same.
P/F eye piece of glass to door i/c labour charges etc. complete.
P/F G.I. Socket in existing water line all complete as per direction of Engineer-in-charge.
a)15mm nominal bore.
b)20mm nominal bore.
c)25mm nominal bore.
P/F SCI P trap of Nicco to WC pan i/c labour charges & other fixing materials etc. all complete as per direction of Engineer_in_charge.
Replacing damaged G.I. Jali in Jali doors/windows i/c cost of material & labour all complete as per direction of Engineer-in-charge.
Removal of chockage of floor/nahani trap, Ptrap, rain water pipe G.I. Supply lines & sanitary / drainage pipe lines etc. complete as per direction of E.-in-C.
Arranging electric welding machine at site for repairing works etc. with necessary cables and other T&P including the cost of operator and electrodes but excluding the cost of necessary steel sections complete as per direction of Engineer-in-charge. (Note: One day or part day work at one site shall be taken as one job.)
Cleaning of septic tank up to 20 cum capacity in the compound i/c complete removal of silt, sludges, brick bats, garbages, and other refuses, disposing the same to the municiple dumping sites complete as per direction of E_in_C. (Rates includes the cost of cleaning septic tank , dewatering if required i/c removing of cover and keeping the same back in position after cleaning etc. complete)
Deduct for crediting to the contractor old unserviceable material obtained after dismantentling,
a) PVC stop cock, bib cock, pillar cock etc.
b) C.P. brass stop cock, bib cock. Pillar cock etc.
c) Gun metal/ brass gate valve 25mm&20mmetc.
d) PVC cistern10 litre
e) Flush door shutter 35/30 mm thick
f) Hydraulic door closer
g) Pvc tank 500litr
stage.html
html • 0.03 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .