CONSTRUCTION OF DEFI GARAGES FOR A AND B VEHICLES (PHASE II OF TWO PHASES) AT MIRC AHMEDNAGAR

Amount

SCH 'A' PART-I: BUILDING/STRUCTURES Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only

Construction of Block of Garages for 'B' vehicles Trailers {Trailor 1 Ton 2 WHLD 5.5 KVA Gen (02 Nos), Trailor- Gen Set 11.2 KVA ( 06 Nos) and Trailor Gen Set 14.5 KVA ( 03 Nos)} along with apron complete all as shown in drawings and as specified.

Construction of Block of 'A' vehicles Garages for Ttracked Vehicles (BRDM - 10 Nos) alongwith apron complete all as shown in drawings and as specified.

Construction of Block of 'A' vehicles Garages (BMP-I & BMP-II - 15 Nos and ARV WZT - 1 No) alongwith apron complete all as shown in drawings and as specified.

Construction of Block of 'A' vehicle Garages (Radar Carrier HMV - 4 Nos) alongwith apron complete all as shown in drawings and as specified.

Construction of Block of Toilet complete all as shown in drawings and as specified.

Construction of Washing Platform all as shown on drawing No. CEPZ/ 2023/ ANR/02(E) sheet 1/1 and having details in drawing No. CEPZ/91/TD/42M Sheet 1/2 to 2/2 complete and as specified.

Construction of Static Water Tank of 50000 Litre capacity complete all as shown in drawing No. CEPZ/2023/ANR/02/STR sheet 8/8 and as specified.

Providing, laying and connecting up LLDPE Septic tank of capacity 500 litres (Black colour) designed to carry sewage and ludge water includingall necessary fixing arrangements as per Manufacturer's instructions complete all as directed. Makes: Syntex / Supreme / Aquatch / United.

Construction of Soakage well of size 2.40 metre dia and 3.00 metre depth complete all as shown on drawing No. CEPZ/2019/TD/03 sheet 1/2 & 2/2 and as specified.

NOTE: Schedule ‘A’ Part II to X items have been Prepriced by MES and the Bidders shall insert their lumpsum cost in green field under Column-6 only.

Total amount of Sch 'A' Part-II (Internal Water Supply)

Total amount of Sch 'A' Part-III (Internal Electric Supply)

Total amount of Sch 'A' Part-IV (Road, Path, Culvert and Stone Sett Flooring)

Total amount of Sch 'A' Part-V (Area Drainage)

Total amount of Sch 'A' Part-VI (Sewage Disposal)

Total amount of Sch 'A' Part-VII (Compound Wall, Fencing and Gate)

Total amount of Sch 'A' Part-VIII (External Water Supply)

Total amount of Sch 'A' Part-IX (External Electric Supply)

Total amount of Sch 'A' Part-X (Site Clearance, Excavation and Earthwork)

NOTE: Schedule ‘A’ Part II to X items which are not Prepriced by MES are given in Sch 'A' Part-XI, Bidders shall insert their rate in Column-6 only and the Estimated rate indicated as "0.0" are for that purpose.

SCHEDULE 'A' PART-XI (MISC B/R AND E/M WORKS)

S&F 20 Watt LED tube light fitting 4 feet long with polycarbonate housing LED lighting fixture with high lumen output, environmental friendly, energy efficientCRI-6500K, PF not less than 0.95, fixed on PVC square for mounting the fitting and electrically connecting with three single core 23/0.0076 PVC insulated multi stranded copper flexible cable from ceiling rose to light fitting (connector of lamp fitting) and one for earthing complete all as specified and directed. (Make:- Havells Cat No. LHEXBLP7PN1W020, BENLO Cat No. BLO4BAT20WT5, Halonix Cat No. HLB-08-20-CW-IP, Wipro Cat No. LL20-221-XXX-65 NE3).

S&F LED light fitting, out door type, Building security light of 25 to 30 Watt fixture consisting of extruded aluminium extrusion housing with PC diffuser, LED fixture system wattage of 36 W / 40 W, 140 V - 260 V AC, system, Lumen output min 3960 lumen in 36 W or 4400 lumen in 40 W with 5700 - 6500 K CCT with CRI > 85, PF > 0.95 and THD < 10 % with minimum 2.5 KV surge protection in built and complete LED fixture with BSI R mark and R Registration No. and including bracket made of 40 mm dia GI tube light grade, bent to shape required including 2 Nos of flat iron brackets duly welded with nuts, bolts and washers etc., including electric connection with 3 core flexible copper conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. (Make: Philips Cat Part No. SM 365C LED 32-6500 PSU OD WH or Havells Cat Part No. ENDURAPEARLSL25WLED757SASY TOPC or equivalent in makes as per Appendix 'C').

S&F Exhaust fan, made out of sturdy Engineering plastic body, AC single phase, 230 Volts, 230 mm sweep, 1200 RPM, copper wound motor with blades, frame and louver shutter, complete all as specified and directed.

M&L for cutting the existing bituminous road / PCC hard standing upto 75 cm in depth 60 cm wide and getting out the excavated materials and making good the damaged portion after laying of pipes by returning, filling in including spreading, watering and well ramming, removing the excavated balance materials to a distance not exceeding 50 m and deposited where directed and top surface provided with and including PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) 30 cm thick to match the new surface with existing road surface level complete all as specified and directed.

M&L Drilling, tapping existing Cast iron / Ductile iron main in position for branch connection or for inserting including providing straight brass ferrule of 50 mm dia complete all as specified and directed.

Supply, installed, testing and commissioning of heavy duty high performance and high efficiency, Horizontal Open well Submersible pump, single or multi stage water pump of discharge capacity 01 HP,132 LPM at 18 mtr head, having horizontal mounting with cast iron impeller, high tensile carbon steel shaft, protection sleeve, gland packed stuffing box or with mechanical sealing arrangement having 25 mm dia Suction and 25 mm dia delivery, 2800 RPM, 210 V, single phase 50 Hz TEFC, AC electric motor of including factory made BOL Starter Panel Outdoor type with suitable capacity MCB suitable HP including factory made DOL starter panel outdoor type with suitable capacity MCB and suitable anti vibration mounting / fixing arrangement for base frame of pump set as designed / recommended by the manufacturer, connecting the pump motor with suitable size of PVC E insulated stranded copper conductor cables, encased in and inclusive of flexible conduits or PVC pipes heavy gauge of duly embedded in floor from starter to motor, with all standard accessories / fittings / devices and including supply of 2 years normal maintenance spares as per manufacturer standard recommended list complete all as specified and as directed. (Make: As per makes specified in Appx 'C'). Note : Rate quoted shall be inclusive of complete excavation and earthwork in any kind of soil as per site requirement.

M&L Construction of Fly ash bricks masonry valve pit chamber of size 900 x 900 x 900 mm (depth) internal dimensions with 15 cm thick foundation using PCC 1:4:8 type D-2 over 15 cm thick hard core, built in 23 cm thick fly ash brick wall in cement and sand mortar 1:4, 15mm thick internal plaster including 50 mm thick PCC 1:3:6 bedding, 3mm thick MS sheet cover with 40mm x 40mm x6mm MS angle iron frame fixed in PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) coping with 25mm x 6mm flat iron hold fast with handle and locking arrangement including necessary painting steel surfaces with two coats of synthetic enamel paine over a coat of red oxide primer, excavation, earth work, returning & filling in type of soil and disposal of surplus soil at a distance of not exc. 50 m, complete all as specified.

S&F LED street light fitting complete with all fitting & fixing accessories, 60 Watt, 230 volts AC, outdoor type, made out of high pressure die cast aluminium housing and heat resistant glass and high efficient electronic driver, lamp bracket with impact and corrosion management in multiple optic, IP 65/66 thermal protection, prewired, connected and fixed on walls PCC/Steel poles etc. with and including 32 mm dia GI pipe light grade 1.0 m long bracket made to shape required and necessary nuts, bolts and washers complete as specified and directed. (Makes: Benlo Cat Part No. BL18SL60W(UST) or Havells Cat Part No. ENDURAPEARLNEOSL60WLED757PASYTOPC or equivalent in makes as per Appendix 'C').

S&F PVC weather proof Pole junction box with hinged door and locking arrangement of size 200 x 140 x 95 mm (internal) comprising 10 Amp aluminium bus bar, 240 Volt, neutral link and 01 No MCB single pole of capacity 6 Amp 240 Volts and one number heavy duty connector block of polycarbonate body with 4 terminals for loop in & loop out suitable for three phase street light system including nuts and bolts and connecting up complete with MS clap fabricated from 25 x 3 mmm flat iron, nuts, bolts and washers etc. complete all as specified and directed.

Supply, installation, testing and commissioning outdoor cubical LT feeder pillar Panel suitable for 3 phase 4 wire 240 volts 50 Hz system, suitable size powder coated, weather, dust and vermin proof, factory fabricated, totally enclosed, front opening door type, IP-54 class protection, made out of 3.15 mm thick CRCA sheet metal outer and 2 mm thick for inner compartments conforming to IS: 8623 and frame made out of MS angle 50 x 50 x mm, panel shall be of suitable size not less than 50 cm internal depth for housing bus bar, LT switchgears and measuring instruments, cubical fabricated truly to box type, both side openable hinged panel board with opening handles, locking arrangements, provided with sufficient circular holes at the bottom sheet for entry of plated cable glands and aluminium lugs suitable for incoming and outgoing cables, provided with PVC rubber bushes to spare holes, including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 volts grade IS 694 marked or PVC sleeved copper strips of appropriate sizes but not less than 2.50 Sqmm, including provision of PCC platform and grouting panel legs in PCC block so that the bottom of panel shall be at minimum 40 cm above ground level and 50 cm embedded in concrete 1:4:8 type D-2 using 40 mm graded stone aggregates, all accessories prewired complete with and including the following controls and accessories:-

(a) Insulated TPN Copper bus bar of rating 100 Amp - 01 Set

(b) Incoming -

(i) MCCB 4 Pole, 415 V, 63 Amp, 16 KA, 50 Hz with fixed thermal and magnetic settings - 01 No

(c) Outgoing-

(i) MCCB 4 Pole, 415 V, 32 Amp, 10 KA, 50 Hz with fixed thermal and magnetic settings - 02 Nos.

(ii) MCB 2 Pole, 415 V, 16 Amp, 10 KA, 50 Hz with fixed thermal and magnetic settings - 05 Nos.

(iii) Automatic street light ON/OFF timer of capacity not less than 16 A, 3 Phase, 3 Pole with suitable capacity of contactors, relays, control wiring and all accessories specified.- 01 Set.

(iv) Multifunction Digital square type intelligent panel meter to measure voltage, current, frequency and Power factor - 01 No

NOTES:

(i) Panel shall be manufactured by the reputed manufacturer who is possession of type test certificate by CPRI not older than ten years.

(ii) Rate quoted shall be inclusive of complete excavation and earthwork in any kind of soil as per site requirement.

Provide Provisional Sum for Construction of Hard standing for parking including Apron for Trailer GS 50 Ton 6 x 6 GS TPR including stone Sett Paving for total area of 1173.64 Sq.M complete all as per specifications shown in Schedule of Finishes drawing No. CEPZ/2023/ANR/02(A) sheet 2R/3 and as directed.

Samruddhi Construction

Sharda Infratech

M.R.Mutha Engineers

N. H. Saluji & Associates

Kanika Construction Company