PETTY REPAIR FOR ATTENDING DAY TO DAY EM EXTERNAL WATER SUPPLY AND ELECTRICAL COMPLAINTS AT RR COLONY AND NICHLOSON RANGE INCLUDING ATTENDING DAY TO DAY COMPLAINTS OF BOREWELLS AT RIDGE FOREST AND CONNECTED AREA IN THE AREA OF AGE U WATER SUPPLY NO I

Amount

Labour only for Attending day to day external water supply complaints of all nature i.e. leakage in water supply pipe lines, fittings/fixtures, over flow of overhead tank, no water supply including noting the complaints in complaint register complete all as specified and as directed.

Labour only for attending day to day Electrical Supply Complaints (including sunday & Holidays) maintenance of existing LT panels including connecting electrical accessories/spares of water supply installations, electric fittings with lights, short circuits in pump house including noting the complaints in complaint register complete all as specified and as directed.. Note for srl No 1 & 2 :- Material required for attending complaints shall be measured & paid separately under respectvie items here-in-after.

Notes for Srl No. 1 & 2 :- The rates quoted by the contractor shall also deemed to be included for the following :- (i) The complaints shall be attended and the defects shall be rectified by a team of One Experienced Electrician and One Experienced Plumber assisted with two helper, matriculation passed qualified having minimum 03 years experience . (ii) The complaints shall be attended & defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 500/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from Contractor's dues. (iii) In case , after checking & attending the defect,if it is not possible to rectify the defect within 08 hrs, the facts shall be brought to the notice of Engineer-in-charge by the contractor/his rep. If Engineer-in- charge is satisfied with contractor's view, no recovery will be made.

(iv) While attending the complaint of water supply/Electric supply if earth work is required then the same shall be measured and paid seperately under appropriate item of Sch 'A'/BOQ. However no extra payments shall be made for dewatering. (v) Cutting of GI pipe in position and threading is also deemed to be included in the job quoted rates (Fittings and fixtures shall be measured and paid separetely under respective items of Sch A/BOQ). (vi) All T&P required for attending the complaints shall be provided by the contractor without any extra. (vii) The pipe fitter shall always be in possession of die set complete with cutters,Taps, Pipe wrench ,Chain wrench, Caulking tools, complete set of spanners and ladders etc..,as required at site. (viii) The electrician shall always be in possession of all electrician tools, LT megger, Earth tester, multimeter, crimping tool, insulation tape, hand gloves etc. as required at site.

Supply only GI Socket, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI Socket 15 mm bore

GI Socket 20 mm bore

GI Socket 25 mm bore

GI Socket 40 mm bore

GI Socket 50 mm bore

Supply only GI Elbow, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI Elbow 15 mm bore

GI Elbow 20 mm bore

GI Elbow 25 mm bore

GI Elbow 40 mm bore

GI Elbow 50 mm bore

Supply only GI Union, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI Union 15 mm bore

GI Union 20 mm bore

GI Union 25 mm bore

GI Union 40 mm bore

GI Union 50 mm bore

Supply only GI Nipple of different length as per requirement, both end screwed medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI Nipple 15 mm bore

GI Nipple 20 mm bore

GI Nipple 25 mm bore

GI Nipple 40 mm bore

GI Nipple 50 mm bore

Supply only GI reducing socket, medium grade, ISI Marked complete all as specified and as directed of following sizes.

GI reducing socket size 20 x15 mm bore

GI reducing socket size 25 x15 mm bore

GI reducing socket size 25 x20 mm bore

GI reducing socket size 50 x40 mm bore

Supply only GI Tee, Medium Grade, complete all as specified and as directed of following sizes

GI Tee , 15 x 15 x 15 mm bore

GI Tee , 20 x 20 x 15 mm bore

GI Tee , 20 x 20 x 20 mm bore

GI Tee , 25 x 25 x 15 mm bore

GI Tee , 25 x 25 x 20 mm bore

GI Tee , 25 x 25 x 25 mm bore

GI Tee , 40 x 40 x 20 mm bore

GI Tee , 40 x 40 x 25 mm bore

GI Tee , 40 x 40 x 40 mm bore

GI Tee , 50 x 50 x 15 mm bore

GI Tee , 50 x 50 x 20 mm bore

GI Tee , 50 x 50 x 25 mm bore

GI Tee , 50 x 50 x 40 mm bore

GI Tee , 50 x 50 x 50 mm bore

Supply only GI plug, solid, heavy duty, complete all as specified and as directed of following sizes.

GI plug, 15 mm bore

GI plug, 20 mm bore

GI plug, 25 mm bore

GI plug, 40 mm bore

GI plug, 50 mm bore

Supply Only PVC 'L' type holder, suitable for aluminium rod, float ball, of following size bore complete all as specified and as directed.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Supply only PTMT float valve, Sizes as under, with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed.

PTMT float valve, 15 mm bore

PTMT float valve, 20 mm bore

PTMT float valve, 25 mm bore

PTMT float valve, 40 mm bore

PTMT float valve, 50 mm bore

Supply only Gun metal gate valve, with iron wheel head screwed both ends for iron pipe as per IS-778 and fixed including taking out unserviceable one, complete all as specified and as directed of following sizes.

Gun metal gate valve, 15 mm bore

Gun metal gate valve, 20 mm bore

Gun metal gate valve, 25 mm bore

Gun metal gate valve, 40 mm bore

Gun metal gate valve, 50 mm bore

NOTE :- Ser No 03 to 12.05 Labour element required for replacement will be measured and paid under item No-I above.

Supply Only lead pig bar complete all as specified and as directed.

Supply Only Spurn Yarn complete all as specified and as directed.

Supply and fixing in replacement 25 to 150 mm long, 6 to 20 mm dia nuts, bolts & washers complete all as specified and as directed.

Taking up or down GI steel tubing of following sizes with connections from Trenches/floors/walls including cleaning for refixing or removal complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Refixing/ relaying, jointing and testing old GI steel tubing of following sizes, retrieved under srl No 16 here-in-before in new or old position at walls,ceiling or floor etc including cleaning or rerunning the old screw threads, with & including providing new GI fittings complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Laying only of GI steel tubing medium grade of following size in old or new position as in trenches with necessary fixing arrangements and including providing new GI fittings complete all as specified and as directed. Note :-(i) Excavation for new location shall be measured & paid separetely. (ii) GI Steel tubing shall be issued under schedule 'B' free for Fixing. (iii) GI fittings shall be measured and paid under respective items.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Cutting and screwing the existing steel tubing of following size bore for addition & alteration or lengthening screw on pipe to form connector complete all as specified and as directed.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Taking up or down DI Pipe of following sizes including all fittings) with spigot and socketed ends and lead tyton joints including burning out lad joints and recovering lead and including cleaning for refixing or removal complete all as specified and as directed. Note:- Excavation & earth work shall be measured & paid separetely.

100 mm bore

150 mm bore

200 mm bore

Supplying, Laying, jointing, testing and commmisioning DI Pipe of following sizes as per IS 8329-2000, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches complete all as specified and as directed . Note:- Joints shall be measured & paid separetely.

100 mm bore

150 mm bore

200 mm bore

Material and Labour for CI/DI fittings/specials such as Tees of any size and radious,bends,collars,tapers,tail pieces,caps and plugs up to 150 mm bore complete all as specified and directed

Material and Labour for CI/DI fittings/specials such as Tees of any size and radious, bends,collars,tapers,tail pieces,caps and plugs from 200 to 300 mm bore complete all as specified and directed

Opening of existing sluice valve including opening of gland cover taking out with stem nut of brass or of stainless steel & refexing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed of following sizes. Note:- Spare parts under relevant items shall be measured and paid separately under respective items.

80 mm bore

100 mm bore

150 mm bore

200 mm bore

Supply only 'stem' made out from stainless steel of sluice valve of following sizes, complete all as specified and as directed.

Stem, 80 mm bore

Stem, 100 mm bore

Stem, 150 mm bore

Stem, 200 mm bore

Supply only 'Stem Nut' made out from stainless steel suitable to match with existing sluice valve, sizes as under, complete all as specified and as directed.

Stem Nut, 80 mm bore

Stem Nut, 100 mm bore

Stem Nut, 150 mm bore

Stem Nut, 200 mm bore

Supply only 'Gland Plate' made out from Cast Iron suitable to match with existing sluice valve, sizes as under, complete all as specified and as directed.

Gland Plate, 80 mm bore

Gland Plate, 100 mm bore

Gland Plate, 150 mm bore

Gland Plate, 200 mm bore

Supply only 15 mm bore Bib tap of PTMT, any tint, high pressure screwed for male/ female threaded, for pipe of size 15 mm bore complete all as specified and as directed. .

Rubber Gasket joint(Tyton) including jointing material for CI/DI Pipe of following sizes complete all as specified and as directed .

100 mm bore

150 mm bore

200 mm bore

Supplying and fixing Digital liquid water level monitor/controller with inovate PIEZO-RESISTIVE linear sensor, non ambiguous display 3 x 1/2 digit (1999 count max) unit option any two of cm,ltrs,percent(%) resolution 0.1 for % and One cm upto 20 mtrs deep tank DATUM level adjustable, power 10-14 VDC ( 5 watts),temp 0.55 degree celcius, relay No 230 VAC, 6 Amp, sensor to tripod to make it fully serviceable/functional by renewal of defective parts, for semi under ground sump after taking down/out as existing at site complete all as specified and as directed.

Supply only Switch Piano flush type 5/ 6 amps single pole one way 240 volts complete all as specified and as directed.

Supply only Switch Piano flush type 15/16 amps, single pole, one way, 240 volts complete all as specified and as directed.

Supply only Switch Socket outlet 2 in 1, 3/5 pin, 5/6 amps 240 volts complete all as specified and as directed.

Supply only Switch Socket outlet 2 in 1, 3/5 pin, 15/16 amps 240 volts complete all as specified and as directed.

Supply only Switch Socket combination 2 in 1, 3/5 pin, 5/6 amps 240 volts complete all as specified and as directed.

Supply only Switch Socket combination 2 in 1, 3/5 pin, 15/16 amps 240 volts complete all as specified and as directed.

Supply only MCB SP, 6 to 32 Amp, 240 volts complete all as specified and as directed.

Taking down existing LED street light fitting, model SLE UL, 90 Watts IP 66 LXN for servicing, calliberation and repair of CC LED driver (PCB) with input voltage 240 V AC 50 Hz and output voltage 21-36 V DC, 2.30 amp and refixing in position by providing LED 90 watts to make it functional complete all as specified and as directed.

Taking down existing LED street light fitting, model SLE UL, 90 Watts IP 66 LXN for servicing, calliberation and repair of timer & dimmer having 100 % at 1800 hours to 2100 hours and 50 % dimming at 2100 hours to 0400 hours and 100 % at 0400 hours to 0700 hours and refixing in position by providing LED 90 watts to make it functional complete all as specified and as directed.

Taking down existing LED street light fitting, model SLE UL, 90 Watts IP 66 LXN including supplying and fixing LED plate of 45 x 2 watts and refixing in position to make it functional complete all as specified and as directed.

Supply only LED batten arrow for multi application suitable for 18 Watts with & including necessary cable connection to make it functional complete all as specified and as directed.

Supplying and fixing three core poly tetra flouro ethylene teflon silcer plated copper wire shielded temp range 40 degree to 240 degree, size 0.25 Sqmm (24/7/32) after taking down/out as existing at site complete all as specified and as directed.

Supply & fixing non metallic PVC conduit 25 mm bore, medium grade having 2 mm wall thickness with & including all fittings such as tee,bends, reducer, elbow, bell mouth, tube ends etc with all other fixing accessories such as couplers, locknuts saddles ,pipe hooks, clips etc complete all as specified and as directed.

Supply only sheet metal enclosure MCB,DB 4 way, SPN,240 volts complete all as specified and as directed.

Supply only sheet metal enclosure MCB,DB 8 way, SPN,240 volts complete all as specified and as directed.

Supply only PVC insulated multistranded copper conductor wire of size 1.5 Sqmm, 1100 volts grade fixed on panels/walls complete all as specified and as directed.

Supply only PVC insulated multistranded copper conductor wire of size 2.5 Sqmm, 1100 volts grade fixed on panels/walls complete all as specified and as directed.

Supply only PVC insulated multistranded copper conductor wire of size 4 Sqmm, 1100 volts grade fixed on panels/walls complete all as specified and as directed.

Supply only PVC multistranded aluminium conductor, 1100 volts grade , cross sectional area 4 sqmm, 2 core fixed on panels/walls complete all as specified and as directed.

Supply only PVC multistranded aluminium conductor, 1100 volts grade , cross sectional area 6 sqmm, 2 core fixed on panels/walls complete all as specified and as directed.

Supply only PVC insulation tape role 15 mm wide , 10 Running meter long complete all as specified and as directed. NOTE :- Labour element for Ser item No 31 to 37 and Ser item No 44 to 51 will be measured and paid under item No-2 here-in-before.

Supply and fixing rotational moulded polyethylene water storage tank, cylindrical vertical with closed top, 500 litres capacity, tripple layered, hoisted and fixed in position after taking down as existing at site (of any capacity) complete all as specified and as directed..

Supply and fixing rotational moulded polyethylene water storage tanks, cylindrical vertical with closed top, 1000 litres capacity, tripple layered, hoisted and fixed in position after taking down as existing at site (of any capacity) complete all as specified and as directed..

Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level complete all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing excavated material to a distance not exc 50 m and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed.

Supply and fixing in replacement of LED energy saving environmental friendly long life innovative security light luminaire 45 watt (white) pressure die cast aluminium housing with heat resistance toughned glass & IP- 66 protection with and including driver/transformer complete all as specified and as directed.

Supply and fixing in replacement of LED energy saving environmental friendly long life innovative security light luminaire 60 watt (white) pressure die cast aluminium housing with heat resistance toughned glass & IP- 66 protection with and including driver/transformer complete all as directed

Surface dressing of uneven surfaces of natural ground, rough excavated surfaces not exceeding 15 cm deep and filled area where ordered shall be trimmed to an even surface horizontal or slopping, by removing vegetation and by scrapping high patches and filling low patches with the scrapping soil to given an even and neat look to the site complete all as specified and as directed.

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep for pipe line in ordinary soil getting out and levelling of bottom surface to required level complete all as specified and as directed.

- do- all as per Srl No. 1 (a) above but in hard/dence soil.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing excavated material from site to a distance not exc 50mtr away and depositing where directed not exc 1.5mtr from the starting point complete all as specified and as directed.

Taking up existing GI/MS water mains of following sizes including all fittings complete all as specefied and as directed.

400 mm bore dia pipe.

350 mm bore dia pipe.

300 mm bore dia pipe.

250 mm bore dia pipe.

200 mm bore dia pipe.

150 mm bore dia pipe.

100 mm bore dia pipe.

80 mm bore dia pipe.

Supplying, laying jointing testing MS(ERW) pipe, Heavy duty of size following bore 6 mm thick (for dia 400 to 200 mm) confirming to IS - 3589 complete all as specefied and as directed.

400 mm bore dia pipe.

350 mm bore dia pipe.

300 mm bore dia pipe.

250 mm bore dia pipe.

200 mm bore dia pipe.

150 mm bore dia pipe 'C' Class.

100 mm bore dia pipe 'C' Class.

80 mm bore dia pipe 'C' Class.

Supply and fixing MS flanges welded on ends of MS pipe of size following size/bore, (flange not less than 15 mm thick) complete all as specefied and as directed.

400 mm bore dia pipe.

350 mm bore dia pipe.

300 mm bore dia pipe.

250 mm bore dia pipe.

200 mm bore dia pipe.

150 mm bore dia pipe.

100 mm bore dia pipe.

80 mm bore dia pipe.

M&L Joints with rubber or fibre board gasket of following bore complete with nut,bolt and double washers.

400 mm bore dia pipe.

350 mm bore dia pipe.

300 mm bore dia pipe.

250 mm bore dia pipe.

200 mm bore dia pipe.

150 mm bore dia pipe.

100 mm bore dia pipe.

80 mm bore dia pipe.

S&F M.S Pipe header as per IS 3589, 350 mm dia, 6mm thick, 18.00 mtr in length flanged ends closed with dead plate both ends not less than 16mm thick including provision of following incoming & outgoing connection of MS pipe, heavy duty, class ‘C’ of length 300 mm with two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed by engineer-in-charge including taking out old, rusted MS header 300mm bore.( at New VRC P/H) Note :- In comming & out going details as under mentioned)

100mm dia incoming : 05 Nos

150mm dia outgoing : 13 Nos

M.S flange 350 mm bore 15 mm thick : 06 Nos

M.S flange 150 mm bore 15 mm thick : 13 Nos

M.S flange 100 mm bore 15 mm thick : 5 Nos

S&F M.S Pipe header as per IS 3589, 350 mm dia, 6mm thick, 12.00 mtr in length with flanged ends closed with dead plate not less than 16mm thick including provision of following incoming & outgoing connection of MS pipe, heavy duty, class ‘C’ of length 300 mm with two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed by engineer-in-charge including taking out old, rusted MS header 350 mm bore.(at New 180 Or's P/H) Note :- In comming & out going details as under mentioned)

80mm dia incoming : 02 Nos

150mm dia outgoing : 5 Nos

M.S flange 350 mm bore 15 mm thick : 04 Nos

M.S flange 150 mm bore 15 mm thick : 05 Nos

M.S flange 100 mm bore 15 mm thick : 02 Nos

S&F M.S Pipe header as per IS 3589, 300 mm dia, 6mm thick, 30.00 mtr in length with flanged ends closed with dead plate not less than 16mm thick including provision of following incoming & outgoing connection of MS pipe, heavy duty, class ‘C’ of length 300 mm with two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed by engineer-in-charge including taking out old, rusted existing MS header . (at Old VRC P/H Suction header) Note :- In comming & out going details as under mentioned)

150 mm dia incoming : 06 Nos (of length 300 mm)

M.S flange 300 mm bore 15 mm thick :10 Nos

M.S flange 150 mm bore 15 mm thick : 6 Nos

S&F M.S Pipe header as per IS 3589, 350 mm dia, 6mm thick, 18.00 mtr in length flanged ends closed with dead plate not less than 16mm thick including provision of following incoming & outgoing connection of MS pipe, heavy duty, class ‘C’ of length 300 mm with two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed by engineer-in-charge including taking out old, rusted MS header 300mm bore.(at Old VRC P/H Delivery header) Note :- In comming & out going details as under mentioned)

150 mm dia incoming : 02 Nos (of length 300 mm)

150 mm dia incoming : 04 Nos

150mm dia outgoing : 11 Nos

M.S flange 350 mm bore 15 mm thick : 06 Nos

M.S flange 150 mm bore 15 mm thick : 15 Nos

Supplying, Fixing, jointing and testing of cast iron Sluice Valve ISI marked (PN-1.0) confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets of following sizes complete in replacement all as specified and as directed.

150 mm bore

100 mm bore

80 mm bore

Supply, fixing CI Non return Valve with GM seat, PN-1.0 ISI mark, including flange joints such as packing, nut and bolts etc of following sizes complete in replacement all as specified and as directed.

150 mm bore

100 mm bore

80 mm bore

Supply & fixing CI Foot valve flanged ends as per IS 4038 including flange joints such as packing, nut and bolts etc of following sizes complete in replacement all as specified and as directed.

200 mm bore

150 mm bore

100 mm bore

Brick work in CM (1:4) with sub class 'B' bricks above ground level and not exceeeding 1.5mtr in height from ground level including footing complete all as specified and as directed.

PCC (1:4:8) type B-1 finished even and smoooth without using extra cement for foundation

PCC (1:2:4) type B-1 finished even and smoooth without using extra cement as on brick pillars complete all as specified and as directed.

Rendering 10 mm thick plaster on brick work/concrete surface in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

Supply and fixing Pressure gauge of capacity 7 kg/Cm2 100 dia completeall as specified and as directed in replacement .

An amount of Rs 167929.00 shall be deducted from BOQ on account of schedule of credit

Rahul Enterprises

HIND CONSTRUCTIONS

M/S ANIL KUMAR

Microsys Controls India

Deven Associates

Ridhi engineers and builders