Construction of Sevarthigal Mandabam and Rest rooms

Amount

SDR - (Not Requiring Blasting) Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Soft disintegrated rock, laterite, soft rock or kankar, not requiring blasting. to a full depth etc., complete complyiny with relevant std specification.

Open Earth work SDR - (Not Requiring Blasting) Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Soft disintegrated rock, laterite, soft rock or kankar, not requiring blasting. to a full depth etc., complete complyiny with relevant std specification.

Supplying and filling in foundation in basement with M sand in layars of 150 mm thickness well watered rammed and consolidated complyiny with relevant std specification including cost of supplying filling sand..

Supplying and filling with gravel including cost and conveyance of sand, gravel and all labour charges for filling ramming etc. complete with standard specifications

Cement concrete 1:5:10 (One of cement five of sand and ten of HBG jelly )for foundation using 40mm gauge HBG jelly inclusive of shoring strutting and baling out water where ever necessary ramming curing etc.,complete in respects complying with relevant Std, Specification and as directed by the Dept, Officers..

Cement concrete 1:4:8 (One of cement four of sand and eight of HBG jelly )for foundation using 40mm gauge HBG jelly inclusive of shoring strutting and baling out water where ever necessary ramming curing etc.,complete in respects complying with relevant Std, Specification

Centering for soffits of Rcc slabs of plain surface like lintels, beams, etc., including strutting 3M high using MS sheets of size 90cmx60cm and PG 10 stiffened with MS angles of size 25x25x3mm laid over silver oak (C.W) joists of size 10x6.5cm (spaced at about 90cm c/c) and supports 75cm c/c complying with standard specification and directed 10sqm..

Grade Beam

Columns

Beams & Slab

Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Upto Basement

Ground Floor

First floor

Supplying and fabricating and placing in possition MS grills for reinforcement including cost of steel for all works. The rate including cost of binding wire also (SS NO 134) .

Plain Cement Concrete 1:2:4 for all cement concrete works using 20mm gauge HBG stone jelly excluding cost conveyance of all aterials, laying,curing and finishing etc.complete.

Brick work in cm 1:5 using Country brick of size 83/4"x41/4"x2 3/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc completc complying with standard specification..

Upto basement

Ground floor

First floor

Second floor

Brick Partition wall in Cm 1:3 of 110mm thick. Using country brick of size 83/4"x41/4"x21/4" including plastering both aces with cm 1:5, 12mm thick - 10 cum complete complying with standard specification.

Ground floor

First floor

Plastering with cemet mortar 1:5,12mm thick including cost and conveyance of all materials and all labour charges,curing etc,complete complying with standard specifications.

Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Special plastering for R.C.C. slab beam and sunshades with cement mortar 1:3, 10mm thick including cost and conveyence of all materials and labour charges, curing etc. complete complying with standard specifications.

Painting two coat with approved Emulsion over the cement plastered wall surface, ceiling and other new surface including clearing preparing the surface curing in all floors including brushes etc., complete as per specification. -10 m 2 ( S.I. No 358 )

Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position of Teak wood fully paneled door of size 1.60 x 2.10m with outer frame of 0.10X0.076 m & styles 0.092 X 0.302&middle 0.092 X 0.302 and planks 0.025 m thick including cost and conveyance of all materials furniture fitting etc complete with standard specifications.

Supplying and fixing of Teak wood frames 127 x 76mm size including wrought and putup for Flush door shutters as per standard specifications.

Supplying and fixing in postion of 35mm thick solid core flush door shutters single leaf with TW ply on both sides and with TW lipping of size 35x12mm on all edges with necessary adhesives and C.P. Screws Alu. Butt Hinges (3 nos. 250 x 16 mm Size) Alu. Aldrop1 No. 250 x 16 mm Size, Alu. Tower Bolt 1 No. 250 x12 mm size, alu. Tower Bolt 1 No. 200 x 12 mm size, D type alu. Handle 200mm length 1 No., alu. door stopper with rubber bush 1 No. shall be provided, as directed by the departmental officers etc., complete.

Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.

Supplying and fixing mild steel grill Gate including cost conveyance of all materials and fixing in position including priming coat etc complete with standard specifications.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Best varnish two coats for wood works etc, complete complying with standard specifications.

Painting new iron works such as gate, steel doors windows ventilators with two coats of approved quality and color of synthetic enamel paint over the existing red oxide primer in all floor etc, complete complying with standard specifications.

Weathering course concrete with broken jelly 20mm size and pure slaked lime over RCC roof slab, the proportion being 32:12.5 for required depth of 80mm for giving required slope and thickness of roof on required, well beaten with wooden beater etc, complete.

Finishing the top of roof with one course of machine pressed tiles 23cmx 23cmx20mm of approved quality laid in cm 1:3,12mm thick mixed with water proofing compound 2% by weight of cement used etc, complete with standard specifications.

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

Supplying and fixing in position Indian water colour closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 Part XII with sand cushion and forming flooring alroundthe closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without quality with 'P' trap or 'S' trap confirming to IS:2556 - leakage etc., complete complying with standard spcifications.

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.

Construction of Inspction Chamber of inner dimension 45cm X 45cm x 60cmdepth in country brick work in cm 1:5 using country bricks 8 3/4" x 4 1/4 "X 2 1/4" for side walls of 23 cm thick over a foundation concrete of CC 1:4:8foundation concrete of CC 1:4:8 23 cm thick over a sand cushion of 16 cmthick, the side walls ad bed of chamber inside plaster with CM 1:3, 20 mmthick inclusing channelling for sueer lline to smooth and glossy finish and and glossy finish and covering with RCC precast slabs 5 cm thickness - each.

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position best quality PVC 110 mm soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

110mm pipe

75mm pipe

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

PVC 110 mm Elbow

PVC 110 mm Tee

PVC 110 mm Bend

PVC 75 mm Elbow

PVC 75 mm Tee

PVC 75 mm Bend

Supplying laying and jointing PVC pipes for internal and external water supply arrangements including labour for cutting threading, jointing and excavation of trench for laying pipes refilling with excavated earth after pipes are laid after wrapping with tar gunny bagslaid etc., complete rate incl cost of materials, conveyance, labour etc.,

25 MM PVC PIPES

20MM PVC PIPES

15MM PVC PIPES

32 MM PVC PIPES

32 mm bend

25 mm bend

PVC 25mm x20 tee

PVC 15mm tee

PVC 20mm tee

PVC 25mm tee

PVC 20mm bend

PVC 15mm Elbow

PVC 20mm Elbow

PVC 25mm Elbow

PVC 20 mm x 15mm Reducer

PVC 25 mm x 20mm Reducer

PVC Screw Down Tap Heavy Type 15mm dia

Supplying and fixing PVC water tank 2000 lts capacity of approved quality and colour including labour for fixing in position, including cost of materials, conveyance, labour etc,complete complying with standard specifications.

Supplying and fixing in position 15mm dia PVC heavy type screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of Sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three Sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying and filling in foundation in basement with 40 mm hbg jelly in layars of 150mm thickness well watered rammed and consolidated complyiny with relevant std specification including cost of supplying 40 mm metal.

Supplying and filling in foundation in basement with 25 mm jelly in layars of 150mm thickness well watered rammed and consolidated complyiny with relevant std specification including cost of supplying filling sand.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing Manhole Cover 60 x 60cm (heavy duty) with frameof best approved quality etc., complete complying with standard specifications and as directed by the departmental officers

Manufacturing, supplying and fixing in positon of RCC Jolly of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing, curing, lifting, fixing in position etc., complete complying with standard specification and as directed

Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).

Sub estimate for "Providing Internal and External Eletricfication to the proposed Sevarthigal mandabam and rest rooms in the foot of hills in of Arulmigu Sundara mahalinga swamy Thirukoil at Sathuragiri,Saptur, Peraiur taluk Madurai Dt.

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC Cu. conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with GI Flush mounting box ,Plastic combined cover plate and 6A one way modular type (one module) switch with light/fan marking and making good of the concealed portion with suitable colour for PVC Light/fan point. (The GI flush mounting box,cover plate and switch should be of Legrand/ Hager/ Crabtree/ Equilvalent) (5pt/coil) (DATA-1)

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC Cu. conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall GI Flush mounting box ,Plastic combined cover plate and 6A one way modular type (one module) switch with light/fan marking and making good of the concealed portion with suitable colour for PVC Light/fan point. (The GI flush mounting box,cover plate and switch should be of Legrand/ Hager/ crabtree/ Equilvalent) (6pt/coil) (DATA-2)

Supply and fixing of single box type 4'-20 W LED fitting (Philips / Havells / Eq) with CRCA body complete with TW Round Block on wall or celing with PVC unsheathed Copper leads from terminals to the fitting . (DATA-3)

Supply and fixing of 1200mm (48" ) sweep High speed AC ceiling fan (Crompton / Equivalent) with 2 Module 100W regulator complete with 1m down rod on the existing clamp (DATA-4).

Supply and fixing of 300 mm (12") sweep (Light duty) AC exhaust fan complete without provision of holes in the wall (SD-114)

Supply and fixing of louvers shutters arrangements for 300 mm (12") sweep (light duty) AC exhaust fan (SD-120).

Supply and fixing of 48 W LED street light fitting (Higher End Philips / Havells /Equivalent) with Pressure die cast aluminium housing with IP65 protection with 25 mm dia GI pipe (Class 'B') with 1 No 25 mm GI Bend complete on the post / wall with PVC unsheathed Copper leads MS clarnps and aluminium painting .(DATA-5)

Supply and fixing of 3Nos. 6Amps 5pin Universal wall socket 2module with 3Nos 6A. SP. FT control switch (one module) concealed in suitable GI Flush mounting box ,Plastic combined cover plate with connection complete. (The GI flush mounting box,cover plate and switch & sockets should be of Legrand/ Hager/ Crabtree/ Equilvalent). (Computer plug) (DATA-6)

Supply and fixing of 1No 16Amps 3pin socket (3 module) with 1 No 16A. SP FT switch (one module) concealed in suitable GI Flush mounting box ,Plastic combined cover plate with connection complete. (The GI flush mounting box,cover plate and switch & sockets should be of Legrand/ Hager/ Crabtree/ Equilvalent). (DATA-7).

Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) (SD-140)

Supply and fixing of 4 way Three pole and neutral MCB distribution board in sheet steel enclosure double door type with metal door with IP 42 protection with 1 no 40A FP MCB as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (The MCBDB and MCB's should be with Legrand/Hager make) (DATA-8).

Supply and fixing of 6way vertical type TPN 160A x160 frame MCCB DB with metal double door cover with IP 43 protection with 1No 125A MCCB(over load adjustable,Icu:40KA) as incoming and 6 nos Nos. 32A 3pole MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCB DB and MCB's should be Legrand/Hager make only (DATA-9)

Supply and run of 2 of 2.5 sq.mm (36/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour (For computer set plugs) (DATA-10)

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour (SD-57). (For 15A, SPN DB'S, AC plugs)

Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour (SD-61). (For AHU Units)

Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour (SD - 63).

Supply and run of 4 of 16 Sq.mm (168/0.45) PVC insulated SC unsheathed copper conductor of 1100V grade in 50mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains. (DATA - 11)

Supply and run of 4 of 16 Sq.mm (1684/0.45) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains. (DATA - 12)

Supply and fixng of TNEB Meter Board suitable for 3 Phase, 100A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1½inch x 1½inch x ¼inch rigidly fixed on wall, covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 200A fuse units (500V), 1 No. Neutral link, copper earth flat of size 1inch x ¼inch with interconnection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete. (SD - 130)

Supply and fixing of 3 Phase, 100A aerial fuse unit for 3 Nos 100A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps. (DATA - 13)

Supply and fixing of 100 Amps TPN sheet steel double break switch with HRC fuses and neutral on suitable angle Iron frame work with MS cable entry boxes and with earth connection only (SD - 169)

Supply and fixing of 32A DP MCB in sheet enclosure in flush with wall with earth connection. [The MCB and metal enclosure should be with Legrand / Hager make](DATA-14) ( for street Light control and pump room )

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry ( SD - 233)

Supply and run of 1 of No.8 SWG Copper conductor in Suitable PVC pipe on wall with painting of suitable colour for earth connection. (DATA - 15)

Supply and fixing of 125A FP Change over Swich on suitable angle iron frame work with MS cable entry boxes and with earth connection only (DATA - 16)

Supply,erection,testing and commissing of 1.5.0TR (4500K.cal/hr) ABS plastic split type inverter AC units Conforming to IS.1391(part-2) with AMT 1 to 2 fitted with inverter compressor operating on refrigerant (non-CFC) suitable for wall mounting) expect power consumpition norms suitable for operation on 230V.50Hz single phase AC supply with star rating of 5 as per BEE specification and capable of performing the functions of 1) Cooling 2) Dehumidifying 3) Air circulating 4) Filtering The installation work for the above split type AC units inculds the following 1.Mounting /fitting indoor and outdoor units at their respective locations. 2.Laying refrigerant pipe line of required length connection not exceeding 3 meters distance and both units after drilling hole/holes in the wall if required.Thickness of the copper tubing shall not be less than 0.8mm. 3.Insulating the suction pipe with expanded polythylene foam 5mm tubing. 4. Laying 15mm dia flexible PVC drin pipe to throw out the consensate water being formed with in indoor unit. 5.Leakage testing the entire system gas in the unit. 6.Charging refrigerant gas in the unit. 7.Suitable electric wiring to be provided with 2.5 sqmm PVC insulated copper wire between indoor units upto 6 mtrs length and up to switch with in 3 meters of the location of indoor unit.(Carrier/Voltas/LG/eq). (As per SR).

Supply and Installation of 4 KVA Electronic Automatic Voltage Stabilizer V- GUARD make VND 500 Model with Input Voltage range of 150Volt - 285Volt and Output Voltage range 200Volts to 230 Volts with High and Low Voltage cut off and 3 minutes time delay relay with demonstration. (SR)

Supplying and Fixing M.S Stand for Fixing Outdoor Unit

Supply and fixing of 1000W automatic electric water heater of 25 litres capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flex wire,but without plumbing work Make (Venus / Racold) (DATA - 17)

Supply and fixing of AC/DC 76mm buzzer / call bell suitable for 230 V 50 c/s. single phase AC supply on suitable T.W board with push switch. (SD - 105)

Supply and fixing of 32A/20A Module energy key tag switch with sheet metal box concealed in wall with necessary connection as master control. (DATA - 19)

Supply and fixing of 22W LED surface ceiling light fitting (square / round) on ceiling with wire connction.(DATA - 20)

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL / LED Lamp and giving connection. (SD - 83)

Supply and fixing of LED foot lamp concealed in suitable 3 Modular box with front plate and necessary connection. (DATA - 21)

Supply and fixing decorative wall bracket fitting with 15W LED Bulb with suitable doom cover and giving connection. (DATA - 22)

Supply and fixing of 8 Way single pole and neutral MCB Distribution board in sheet steel encloser double door type with IP 42 protection with 1 no. 32A DP MCB as incoming and 6 nos. 6A/32A SP MCB as outgoing in flush with wall and making good of the concealed portion with Earth connection. (The MCB DB and MCBs should be with Legrand/Hager make) (DATA - 23)

GST 18% of above

N.NATARAJAN