REPAIR TO WOODEN FURNITURE AND POLISHING OF WOODEN FURNITURE UNDER GE (EAST) JALANDHAR CANTT

Amount

CHAIR DINNING (Drg No. FD- 228 & 279) Taking out old unserviceable leg and supply and fixing the front leg of sheesham wood Ist class made to shape , joint fixed with bamboo pins and fevicol by making Tennon Groove joints all as specified and as shown in drg wrought on all sides including dismantling & removing of all unserviceable legs from the frame complete all as specified.

All as per srl item No 1.00 here-in-before but rear leg

All as per srl item No 1.00 here-in-before but side/back/front rail of seat

All as per srl item No 1.00 here-in-before but stiffener of back

All as per srl item No 1.00 here-in-before but stiffener to legs short/long

Material & labour for caning of chair with 2mm wide plastic white/cream colour cane in Godrej pattern all as shown in drawing and as specified including taking down old unserviceable cane .

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

CHAIR EASY (Drg No. FD-223 & 229) Taking out old unserviceable leg and supply & fixing the front leg of first class hard wood (sheesham wood) made to shape, Joints fixed with bamboo pins and fevicol by making Tenon/Groove Joint of size and section as specified and shown in drg wrought on all sides as directed by Engineer-in-Charge.

All as per srl item No No 2.00 here-in-before but rear leg

All as per srl item No 2.00 here-in-before but stiffener

All as per srl item No 2.00 here-in-before but arms

Material and labour for canning of chair with 2mm plastic white /cream cane in Godrej pattern as shown and as specified and all as directed.

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

CHAIR WRITING (Drg No. FD-250 & 280) Taking out old unserviceable front leg and supply and fixing new front leg made of first class hard wood (sheesham wood) made to shape, joints fixed with bamboo pins and fevicol by making Tenon/Grooves joints of size and section as specified and shown in drawings, wrought on all sides, and as directed by Engineer-in-Charge.

All as per srl item No 3.00 above but rear leg

All as per srl item No 3.00 above but front/ side/back all as specified and directed.

All as per srl item No 3.00 above but back stiffener.

All as per srl item No 3.00 here-in-before but arms

Material & labour for caning of chair with 2mm wide plastic white/ cream colour cane in Godrej pattern all as shown in drawing and as specified including taking down old unserviceable cane.

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

CHAIR WB Taking out old unserviceable front leg and supply and fixing new front leg made of first class hard wood (sheesham wood) made to shape, joints fixed with bamboo pins and fevicol by making Tenon/Grooves joints of size and section as specified and shown in drawings, wrought on all sides, and as directed by Engineer-in-Charge.

All as per srl item No 4.00 above but rear leg

All as per srl item No 4.00 above but front/ side/back all as specified and directed.

All as per srl item No 4.00 here-in-before but seat of plywood 6mm thick commercial ply duly perforated as shown on drg and fixed with steel screw and as directed

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

CHAIR DINING CUSHIONED (Drg No. FD/E6/MAP-I/02) Material and labour in replacement of the following components of chair dining offrs without disturbing the other component including tightening of frame all as specified and shown on drg. The work will be executed either at site of at BSO furniture yard to avoid the loos of manpower and transportation.

Removing of existing old worn out/ unserviceable tapestry cloth from seat of chair dining cushioned and providing new tapestry cloth fixing in shape on 12mm thick ply all as per existing and as shown on drg and as per design of existing chair

Removing of existing old worn out/ unserviceable foam from seat of chair dining cushioned and providing new polyurethane foam cushion 75mm thick, 40 density and fabric fixing in shape on 12mm thick ply all as per existing and as shown on drg and as per design of existing chair. Make of foam : Sleep Well/ Kurlon/ Sweet Dream

All as per srl item No 5.02 here-in-before but rear leg

All as per srl item No 5.02 here-in-before but front/ side/back rail of seat all as specified and directed.

All as per srl item No 5.02 here-in-before but stiffener of back all as specified and directed.

All as per srl item No 5.02 here-in-before but stiffener to legs short/ long all as specified and directed.

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

TABLE WRITING (Drg No. FD-249 & 1116) Material and labour for providing table top of size 1200mm x 600mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 6.00 here-in-before but leg of sheesham wood complete.

All as per srl item No. 6.00 here-in-before but side rail of sheesham wood complete

All as per srl item No. 6.00 here-in-before but stiffener of Sheesham wood complete.

All as per srl item No. 6.00 here-in-before but side box with drawer

All as per srl item No. 6.00 here-in-before SS lock

All as per srl item No. 6.00 here-in-before Knob for drawer

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

TABLE 900MM X 600MM X 760MM WITHOUT DRAWERS (Drg No. FD-284) Material and labour for providing leg of sheesham wood of table 900mm x 600mmm x 760mm and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 7.00 here-in-before but front rail of sheesham wood complete.

All as per srl item No. 7.00 here-in-before but side rail of sheesham wood complete.

All as per srl item No. 7.00 here-in-before but stiffener of sheesham wood complete.

All as per srl item No. 7.00 here-in-before but table top of size 900mm x 600mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete.

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

TABLE DINNING FOR 6 PERSONS (Drg No. FD-273 & 1115) Material and Labour for providing table top of size 1500mm x 900mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge

All as per srl item No. 8.00 here-in-before but leg of Sheesham wood complete

All as per srl item No. 8.00 here-in-before but front or rear rail of sheesham wood complete.

All as per srl item No. 8.00 here-in-before but side rail of sheesham wood complete.

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

TABLE 900MM X 600MM X 760MM WITH DRAWERS (Drg No. FD-224 & 283) Material and labour for providing leg of Sheesham wood complete of table size 900mm x 600mmm x 760mm and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 9.00 here-in-before but front rail of sheesham wood complete.

All as per srl item No. 9.00 here-in-before but side rail of sheesham wood complete

All as per srl item No. 9.00 here-in-before but stiffener of sheesham wood complete

All as per srl item No. 9.00 here-in-before but drawer of 6mm plywood complete

All as per srl item No. 9.00 here-in-before but table top of size 900mm x 600mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete. Make : Novapan

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

TABLE DINNING FOR EIGHT PERSONS (Drg No. FD-239 & 1115) Material and labour for providing Table top of size 1800mm x 900mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 10.00 here-in-before leg of Sheesham wood complete

All as per srl item No. 10.00 here-in-before but front or rear rail of sheesham wood complete.

All as per srl item No. 10.00 here-in-before but side rail of sheesham wood complete.

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

TEAPOY (Drg No. FD-278 & 232) Material and labour for providing Front or Rear leg of first class hard wood (sheesham wood) complete of Teapoy dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 11.00 here-in-before but front or Rear rail of sheesham wood complete.

All as per srl item No. 11.00 here-in-before but side rail of sheesham wood complete.

All as per srl item No. 11.00 here-in-before but top of size 600mm x450mm made out of 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked complete.

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

TABLE PEG (Drg No. FD-277 & 236) Material and labour for providing Leg of Sheesham wood complete of Table Peg and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 12.00 here-in-before but front/back/side rail of sheesham wood complete.

All as per srl item No. 12.00 here-in-before but table Top of size 450mm x 300mm made out of 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked complete

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

TABLE CENTRE (Drg No. FD-235 & 274) Material and labour for providing front or Rear leg of Sheesham wood complete of Table Centre and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engineer-in-Charge

All as per srl item No. 13.00 here-in-before but front or rear or side rail of sheesham wood complete .

Table Top of size 900mm x450mm made out of 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked complete.

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

TABLE BED SIDE FD/E-6/MAP/15(R) Material and labour in repair of the following part without disturbing the other component including tightening of frame all as per existing and directed

Supply and fixing shelves made out of PLPB 18/19mm thick exterior grade one side decorative choice and other side balancing white lamination confirming to IS specification

Supply and fixing sides made out of PLPB 18/19mm thick exterior grade one side decorative choice and other side balancing white lamination confirming to IS specification

Supply and fixing 18mm MS Sq front leg (18 gauge) as per existing size by applying two coat of black synthetic enamel paint over a coat of red oxide primer and as specified and shown on drg

Supply and fixing 18mm MS Sq rear leg (18 gauge) as per existing size by applying two coat of black synthetic enamel paint over a coat of red oxide primer and as specified and shown on drg

Supply and fixing 6mm thick commercial ply BWR for back side all as per existing

Supply and fixing heavy duty channels to drawers as per existing and as directed

Supply and fixing CP handle to drawers as per existing and as directed

Supply and fixing top made out of PLPB 18/19mm thick exterior grade one side decorative choice and other side balancing white lamination confirming to IS specification

Removing of unserviceable shoes and supply & fixing new rubber shoes as approved

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

SIDE BOARD (Drg No. FD- 112, 241, 371 & 1112) Material and labour for replacement of unserviceable broken top of side board of thickness 18/19mm pre laminated particle board exterior grade Including taking out the old part from the items as specified and directed by the Engineer-in-Charge.

All as per srl item No 15.00 here-in-before but shutter Door of 18/19mm thick pre laminated particle board exterior grade, Fixed with 4mm thick TW beading all round. Including taking out the old part from the item as specified and directed by the Engineer-in-Charge

All as per srl item No 15.00 here-in-before but shelf of 18/19mm thick prelaminated particle board exterior grade

Material and labour for repairing /replacement of Drawer made out of 18/19mm plywood prelaminated particle board exterior grade alongwith fixing of fancy Knob to the drawer as specified and directed by the Engineer-in-Charge.

Material and labour for fixing of 4 mm teak wood beading in front of side board as required and shown on drgs

Material and labour for repairing /replacement of Ply wood 6mm thick fixed at rear portion of the side board complete all as specified and directed by the Engineer-in-Charge.

Material and labour for replacement of unserviceable long rail made out of first class Indian teak wood well seasoned and free from Knots as specified and directed by the Engineer-in-Charge.

All as per srl item No 15.06 here-in-before but short rail.

All as per srl item No 15.06 here-in-before but leg of side board

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

BOOK CASE (Drg No. FD - 237) Material and labour Legs made out of 1st class Teak wood of size 45mmx45mm up to 40mm from top of legs and 25mm x25mm in section at bottom of legs. The Legs shall be 100mm high fixed together with 25mmx40mm in section Teak wood Rails in short and long sides including taking out the old/UNSV parts from Book case as shown on drawing and as directed by Engineer-in-Charge

All as per srl item No 16.00 here-in-before but top made out of 19mm thick Block Board Commercial with 1 mm thick pre-laminated sheet fixed over it with the help of Fevicol.

All as per srl item No 16.00 here-in-before but shelf in cupboard in the left side shall be 380mm wide and 12mm thick Teak Veneer shade particle board exterior grade one side and commercial other side as shown on drawing.

All as per srl item No 16.00 here-in-before but Shelves on the other side of Book Case made out of 12mm thick Teak Veneer shade Particle Board on one side and other side commercial exterior grade as shown on drawing.

All as per srl item No 16.00 here-in-before but shutter of 380mm cup board made out of 19mm thick particle Board Teak Veneer surface on one side and commercial on other side exterior grade fixed to side of Book Case with help of Piano type hinged including one chromium plated knob and ball spring catch fixed to the shutters all other shown on drawing.

All as per srl item No 16.00 here-in-before but Back of Book case shall be made out of 6mm thick Ply wood commercial grade and fixed with head less Nails.

All as per srl item No 16.00 here-in-before but all front edges of particle board all around the shutters of cup board shall have 3mm thick teak wood edging of width equal to thickness of particle board complete all as specified and directed.

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

TABLE DRESSING LADIES (Drg No. FD-251) Material and labour Legs made out of 1st class Teak wood of size 45mmx45mm in section at top of legs and 25mm x25mm in section at bottom of legs. The Legs shall be 150mm high & shall be joined together with 40mm x25mm in section stiffeners in long and short sides joining legs at top including taking out the old/UNSV parts from Table dressing ladies as shown on drawing and as directed by Engineer-in-Charge.

All as per srl item No 17.00 here-in-before but two drawers made out of 12mm thick plywood BWP of size 310mmx130mmx320mm depth including fixing of Two Nos Knob to drawers complete all as specified and directed.

All as per srl item No 17.00 here-in-before but Two Nos of Glass Shutters 5.00mm fixed alongwith two way aluminium channel of required thickness a space of 550mm on left hand side of table dressing ladies as specified and directed by the Engineer-in-Charge.

All as per srl item No 17.00 above but top made out of 19mm thick commercial particle board over which 1.5mm thick plastic laminated sheet teak face sheet shall be fixed as shown on drawing.

All as per srl item No 17.00 here-in-before but Back made out of 12mm thick particle board with commercial ply wood on both side exterior grade all as shown on drawing.

All as per srl item No 17.00 here-in-before but Teak wood vertical support out of 45mmx45mm shall be provided to back of mirror as shown on drawing.

All as per srl item No 17.00 here-in-before but Supply and fixing of Looking Mirror 5.00mm thick 355mmx1220mm free from all defects, distorted images etc as shown on drawing.

All as per srl item No 17.00 here-in-before but Replacement of 6mm thick commercial plywood backing of mirror.

Material and labour for scraping /removing of existing old polish by old knife or broken glass pieces and sand papering to make the surface smooth and all exposed surface shall be polishing with French polish of high glossy finish as directed.

TABLE DRESSING GENTS (Drg No. FD-230) Material and labour for box of table dressing gents made out of pre laminated particle board 19mm thick with veneer face as shown on drawing over all size of box shall be 900mm long 300mm wide and 150mm high over which 20x40mm thick teak wood beading shall be fixed including taking out the old/UNSV parts from Table dressing ladies as shown on drawing and as directed by Engineer-in-Charge

All as per srl item No 18.00 here-in-before but two drawers equally spaced having 255mm in the middle . Front drawer of 12mm thick pre-laminated particle board teak veneer face sides of the drawer shall be of 12mm thick teak plank running smoothly in the drawer .The bottom and back of drawers shall be 6mm thick ply wood commercial front face of shelves shall have 3mm thick teak wood edging as shown on drawing .

All as per srl item No 18.00 here-in-before but two Nos of Knob shall be fixed to drawers

All as per srl item No 18.00 here-in-before but supply & fixing of looking mirror of size 410mm wide and 790 mm high 5mm thick along with wooden frame of size 25x20mm thick made to the shape as specified and directed by the Engineer-in-Charge free from distortion and other defects.

All as per srl item No 18.00 here-in-before but fixing of two supports of 25mm x 35mm x 1115mm teakwood batten on the back side of the mirror as shown on drg

All as per srl item No 18.00 here-in-before but fixing the 6mm thick plywood backing of mirror as specified and shown on drgs.

All as per srl item No 18.00 here-in-before but replacement of 3mm thick flat iron key plate of mild steel 25mmx25mmin section provided at top of mirror as directed by Engineer-in-Charge and painted with black paint.

Material and labour for scraping /removing of existing old polish by old knife or broken glass pieces and sand papering to make the surface smooth and all exposed surface shall be polishing with French polish of high glossy finish as directed.

TABLE COMPUTER (DRG NO FD/E6/MAP/03) Material and labour for replacement of the following parts without disturbing the other components including tightening of frame complete all as specified, shown on drg and directed

Replacement of top of table computer of PLPB of size 900 x 600 x 18mm thick exterior grade with edges finished with 1.5mm thick PVC beading

Replacement of key board tray with sliding channel as per existing pattern

Replacement of drawer with sliding channel as per existing pattern

Replacement of adjustable nylon buffer as per existing pattern

TABLE DINING OR's (Drg No. FD-165) Removing the following unserviceable part of table dining OR's and supply and fixing new one complete all as specified and directed by Engineer-in-charge:-

Table top made out of 18mm thick prelaminated particle board exterior grade melamine faced including teak wood beading 4mm x 18mm all around the top duly polished complete all as specified and directed by Engineer-in-charge.

Material and labour for painting to steel frame of table dining OR with one coat of synthetic enamel paint (black) including removing of rust, cracks and de-rusting rust spot & preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

HATSTAND WITH MIRROR (FD-233, 361, 362) Material and labour in replacement of the following components of hatstand with mirror complete all as specified and directed. The work will be executed either at site or at BSO furniture yard to avoid the loss of manpower and transportation.

Removing of existing old unserviceable broken mirror and supply & fixing new mirror as per drawing and as directed by Engineer-in-Charge.

Removing old broken/unserviceable base board of hatstand, supply and fixing of new block board 18mm complete as per existing & as directed by Engineer-in-Charge.

Removing old/unserviceable peg set of hatstand, supply and fixing of new peg set complete as per existing & as directed by Engineer-in-Charge.

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

STOOL DRESSING LADIES (FD/E6/MAP/14) Material and labour in replacement of the following components of stool dressing complete all as specified and directed by Engineer-in-Charge

Removing existing broken/unserviceable leg of stool dressing and providing and fixing new leg of sheesham wood complete all as specified and directed by Engineer-in-Charge

Supply and fixing front/back/side rail of sheesham wood all as per existing and as directed by Engineer-in-Charge.

Supply and fixing stool top of size 450mm x 450mm/ existing size made out of 12mm thick ply board exterior grade ISI marked, edges finished with TW beading 1.5mm thick all as per existing and directed by Engineer-in-Charge

Supply and fixing new cushion seat for stood dressing of existing tapestry cloth for seat of stood dressing (cost not less than Rs. 200/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed. The stool dressing shall be fixed on existing wooden frame after replacement as tapestry cloth all as existing and directed

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

BIN LINEN MULTIPURPOSE (Drg No. FD/E6/MAP/09) Material and labour in replacement of the following parts without disturbing the other component including tightining of frame complete all as specified and shown on drgs

Supply and fixing top made out of 18/19mm thick pre-laminated particle board as per existing shape & size Make of Board : Navapan/ Century/ Duro

Supply and fixing bottom made out of 18/19mm thick pre-laminated particle board as per existing shape & size Make of Board : Navapan/ Century/ Duro

Supply and fixing 18/19mm thick pre-laminated particle board on left/ right side as per existing shape & size Make of Board : Navapan/ Century/ Duro

Supply and fixing shutter made out of 18/19mm thick pre-laminated particle board as per existing shape & size Make of Board : Navapan/ Century/ Duro

Supply and fixing shelf made out of 18/19mm thick pre-laminated particle board as per existing shape & size Make of Board : Navapan/ Century/ Duro

Supply and fixing 12mm thick commercial ply as in back as per existing shape & size Make of ply : Kitply/ Greenply/ Century/ Duro

Replacement of drawer with sliding channel all as per existing pattern

Supply and fixing in replacement 50mm handle as per existing shape & size

Supply and fixing stiffener made out of 1st class hard wood as per existing shape & size

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

CHAIR WRITING (Drg No. FD/E6/MAP-12) Material and labour in replacement of the following components of chair writing without disturbing the other component including tightening of frame all as specified, shown on drg and directed

Removing of worn out/ unserviceable tapestry cloth from seat and providing new tapestry cloth with new polyurethane foam cushion shall be 50mm thick and shall be moulded with density 50-55 complete all as specified Make of foam : Sleep Well/ Curolon/ Sweet Dream

Removing of old worn out/ unserviceable tapestry cloth from back and providing new tapestry cloth over with new polyurethane foam cushion shall be 50mm thick and shall be moulded with density 50-55 complete all as specified

Replacement of arms handles with new arms handle as existing

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

om parkash and sons

RATTAN CHAND CHANDAN AND CO