WBPWD/AE-KESD/NIT-03/2025-26

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) 4 bars 415 V, 100 A Dimension of Cu Bars: 4 x 25 x 5mm Dimension of Sheet Metal Encloser: 500 x 150mm D-13/2b

Supplying and fixing 415V, 63 amp TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.(Havells/L&T/Siemens) (D-3/4 a)

Supplying and fixing 415 V, 16-32A per way, TPN MCBDB with SS enclosure double-door with IP-42/43 protection with Four Pole Isolators as incomer and SPMCBs ('C' Curve, 10 kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (make- Legrand/Siemens/Hager) as to G S.(D-10/14,D- 5/6,D-6/7) 6 way, 63A FP isolator, & 18 nos. 6 32 A SPMCB

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (make- Legrand/Siemens/Hager) as to GS.(D-9/13,D- 5/6,D-6/7) 2+8 way, 40A DP isolator, & 8 nos. 6 -32 A SPMCB

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 nos. suitable size “Ph & N” copper bar incl. bakelite / Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish (E-14/2)

Average run 10 mt

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. E-9/1.y

2x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) for SPN

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works

20 mm size

S&Delivery of the following sizes 1.1 KV grade XLPE/PVC cable (Make: Havells / Gloster / Polycab / RR Kabel) - N.S.

4 core x 25 sqmm. Al. armoured cable

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) wire, making holes etc. as necy mending good damages and painting F-1/2 b.

Supplying and fixing compression type gland complete of following XLPE/PVC armoured cables as below. F-4/7

4 core x 25 sqmm. Al. armoured cable

Finishing the end of following XLPE/PVC armoured cables as per GS incl. supplying and fixing solderless socket (Dowels make) etc. F- 5/8.b.

4 core x 25 sqmm. Al. armoured cable

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required (E-14/1a)

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm)

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes(F-5/9)

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.(E-19/17)

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.(E-17/5a )

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections(E-17/5b)

Supply and delivery of Single LED Fitting (1X 18/20Watt, 230VAC, 50Hz, 4000K NW. THD<10%, bult in 2.5KV SPD) with all accessories and 1 nos 18/20 LED Tube 2100 lumen and Auminiuml heat sink. [Make: PHILIPS Cat No-TMC 502 P 2 x TLED,, CROMPTON, WIPRO, Jaquar. With 3 yrs warranty. ( Non Sch.)

Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener. C-2/14.d

Supply of 9" (230mm ) Speed 920 RPM Exhaust fans complete with all accessories ( Make -EIC approved/EPC,Heavy Duty/Usha heavy duty)

Fixing only 9" exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection. C-4/28

S/F 9" louver shutter ( Aluminum)on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per GS. D-14/32

Supply & Delivery of 230V, 1 Star rated 48" (1200mm dia) ceiling fans complete with all accessories with safety wire & S3 Capacitor (Make - Crompton, HS PLUS / Orient, Summer King / Usha, Striker or as per direction of EIC)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. C-3/21.a

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (E-6/22)

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (E-7/26)

Add : GST @ 18%

Add : LWC @ 1 %