MAINTENANCE, REPAIR AND REPLACEMENT OF DEFECTIVE ITEMS OF INTERNAL ELECTRIFICATION AND MISC ITEMS IN OMQ, NP AREA AND TECH AREA AT AIR FORCE STATION PUNE

Amount

Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc complete all as specified and directed.

Taking down cearfully by unscrewing the unserviceable DB Boxes, MC distribution boards SP & TPN with porcelain cutouts etc complete all as specified and directed.

Taking down the sub main wiring of any dia / sq mm on teak wood batten / PVC conduit GI earth wire complete all as specified and directed.

Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor Flame retardant PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor Flame retardant PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings/fixture etc and open recessed type Plastic Enclosure( Plastic Switch Board ) ISI Marked (IS:14772) for housing switches / sockets complete all as specified and directed.

One light point controlled by one switch .

One Fan point controlled by one regulator/switch.

One 3 pin socket 5 A on independent board.

One 3 pin socket 5 A on the same switch board.

One bell point controlled by one bell switch.

Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor Flame retardant PVC insulated single core 1100 volts grade & with one run of 2.5 Sqmm single core copper stranded Flame retardant PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings / fixture etc and open recessed type Plastic Enclosure (Plastic Switch Board) ISI marked (IS 14782) for housing one 15 A Switch / sockets complete all as specified and directed.

M&L for sub main wiring complete with two runs of single core 4 sq mm FRLS PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 4 sqmm single Flame retardan PVC insulated unshedthed multi stranded copper conducator green colour cable for continuous earthing complete in & including PVC casing & caping with all fitting & fixtures complete all as specified and directed. ( Note Two runs of 4 sqmm copper cable and one run of 4 sqm copper cable including PVC casing & caping shall be measured and paid as one length).

M&L for sub main wiring complete with two runs of single core 6 sq mm FRLS PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 6 sqmm single Flame retardan PVC insulated unshedthed multi stranded copper conducator green colour cable for continuous earthing complete in & including PVC casing & caping with all fitting & fixtures complete all as specified and directed. ( Note Two runs of 6 sqmm copper cable and one run of 6 sqm copper cable including PVC casing & caping shall be measured and paid as one length).

M&L for sub main wiring complete with two runs of single core 10 sq mm FRLS PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 10 sqmm single Flame retardan PVC insulated unshedthed multi stranded copper conducator green colour cable for continuous earthing complete in & including PVC casing & caping with all fitting & fixtures complete all as specified and directed. ( Note Two runs of 10 sqmm copper cable and one run of 10 sqm copper cable including PVC casing & caping shall be measured and paid as one length).

Supply & fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cables stranded conductor flat or circular 6 Sqmm complete all as specified and directed.

Supply & fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cables stranded conductor flat or circular 10 Sqmm complete all as specified and directed.

Supply and fix switch piano flush type 5 Amp one way complete all as specified and directed.

Supply and fix switch Socket combination outlet 2 in 1 3 pin 5 amps flush type complete all as specified & diected.

Supply and fix socket outlet 2 in 1, 3 pin ,5 A flush type complete all as specified & diected.

Supply & Fix switch Socket combination 3 pin 16 Amps flush type complete all as specified and directed.

Supply only switch piano, flush button type , single pole, one way 15 amps complete all as specified and directed.

Supply only socket outlet 2in1, 3, 5 and 15 amps, flush type complete all as specified and directed.

Supply and fix Piano switch bell push type switch 5 A complete all as specified and directed.

Supply and fix bell electric 230V single pole complete all as specified and directed.

S & F Fan Regulator electronic step type 230V, 100 W complete all as specified and directed.

S&F angle / batten holder insulated body with back plate for batten fittings complete all as specified and directed.

Supply and fix ceiling rose surface type bakelite / PVC three terminal 65 x 50mm complete all as specified and directed.

S&F Switch flame proof rotary type with termination box in LM6 , 16A single pole 250 V complete all as specified and directed.

S&F Flame proof switch socket & plg combined in LM6 cable terminaton box in LM6 16A 250V 2P+earth complete all as specified and directed.

S&F Fluorescent tubelight fitting 1x36 w flameproof type FLP WP made of aluminium alloy LM6 with electronic ballast bipin holders, connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing LED light fitting 22 W, 220V, AC decorative box type with dirver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting 18 W, 220V, AC decorative box type with dirver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply & Fixing LED light fitting mirror type with high out put diffuser 2 feet , 10 watt 220 V AC decorative type with driver holde and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply & Fix LED light fitting 1x9W/1x10W Bulkhead luminaires including LED Light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED luminair 600mmx600mm 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complet with driver, holders & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply & fixing round shape 15 watt 220 volts recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including conncting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply & fix LED street light fitting Energy saving and environmental friendly long life LED street light fittings 60 Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and Impact resistance of IK07 with 10KV Built-in Surge Protection Device The light fittings shall be fixed on pole/bldg with and including 25/40 mm dia ( or higher size as per manufacturer recommendation), bracket 1.5 m long complete with MS flat iron clamps (clamp shall be 40x5 mm MS flat), nuts and bolts and washers painting the clamps with coat of aluminium paint over a coat of red oxide primer including connection complete all as specified and directed.

Supply & fix LED street light fitting Energy saving and environmental friendly long life LED street light fittings 30 Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and Impact resistance of IK07 with 10KV Built-in Surge Protection Device The light fittings shall be fixed on pole/bldg with and including 32/40 mm dia ( or higher size as per manufacturer recommendation), bracket 1.5 m long complete with MS flat iron clamps (clamp shall be 40x5 mm MS flat), nuts and bolts and washers painting the clamps with coat of aluminium paint over a coat of red oxide primer including connection complete all as specified and directed.

Supply and fix High light intensity empowered color changing & monochromatic LED under water fountain light with polarized light design & intelligent logarthim control technology & included external electronic driver etc. complete all as specified and directed.

S & F twisted type CFL 10 watt 2 PIN Type complete all as specified and directed.

S& F Modular switch 5 Amps fino Type complete all as specified and directed.

S&F Modular socket 5 Amps fino Type complete all as specified and directed.

S&F Modular switch 15 Amps fino Type complete all as specified and directed.

S&F Modular socket 15 Amps Fino type complete all as specified and directed.

S&F Install bus bar panel box with copper bus bar of 300 amps capacity and 200 Amps MCCB as incomer with breaking cpacity 35 KA 4 Pole . The panel shall be made out 3 mm thick CRCA sheet , wallmounting type front opening hinged type double shuttered including powder coating, for housing BDs with bakelite sheet of 1.2 mm thick fixed inside complete with locking arrangement by using panel locks & necessary fixing arrangements and including inter connections from cable and BD with connecting materials earthing dolly etc complete of size 40x30x25 cm complete all as specified and directed.

S&F VTPN 8 way IP 43 IK-09 with double door suitable for provision of MCCB 160 Amps, 25 KA 4 Pole and for housing of MCBs complete all as specified and directed.

S&F VTPN 4 way IP 43 IK-09 with double door suitable for Provision of MCCB 100 Amps, 25 KA, 4 POLE and for housing of MCB's complete all as specified and directed.

S&F MCB DB SPN 4 way IP-43 IK-09 with metal door suitable for housing MCBs complete all as specified and directed.

S&F MCB DB SPN 08 way IP43 IK-09 with metal door suitable for housing of MCBs complete all as specified and directed.

S&F MCB DB SPN 12 way IP 43 IK-09 with metal door suitable for housing of MCBs complete all as specified and directed.

S&F MCCB 160 Amp 415V, 25KA 4 Pole with thimbles/lugs and nut bolts all as required at site complete all as specified and directed.

S&F MCCB 125 Amps, 415V 25KA 4 Pole with thimbles/lugs and nut, bolts all as required at site complete all as specified and directed.

S&F MCB SP 240 Volts, 10 KA C Curve MCB Sp 6 to 32 Amps, complete all as specified and directed.

S&F MCB SP 240 Volts , 10 KA C Curve MCB Sp 40 to 63 Amps complete all as specified and directed.

S&F MCB DP 6 to 32 Amp 10 KA 240 V C Curve and electric connections with copper thimbles complete all as specified and directed.

S&F MCB DP 40 to 63 Amps 10 KA 240 Volt C Curve and electric connections with copper thimbles complete all as specified and directed.

S&F in replacement of sheet metal enclosure with socket plug top single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 06 to 32 Amps complete all as specified and directed.

M & L for providing earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts, nuts, checknuts & washers of GI or steel and connecting to earth dolly all as shown in electrical plate No. 3 of SSR Part I of 1991 & testing complete including 15mm dia light grade GI pipe upto 7.5mtr long, excavation in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm with frame, test box , funnel, wire mesh with GI watering pipe etc. complete all as specified and directed.

Supply & Fix in replacement Highbay LED Energy saving 150 W, environment friendly & robust High bay/Mediumbay LED IP 65 luminaire with high efficacy suitable for ceiling (Surface/Suspended) complete all as specified and directed.

Taking down ceiling fan single phase 240 V 1200 mm /1400mm sweep from the existing position including disconnecting supply cable from ceiling rose / connector opening ceiling fan carefully and taking out worn out/defective spare parts such as bearing/ bush shaft , blades, split pin condenser rubber reel nuts and bolts and washer etc cleaning and washing the bearings /bushs thoroughly and applying necessary lubricants etc and reassembling of ceiling fan after replacement of wornout parts and hanging in original position connecting and testing complete all as specified and directed. [Note :- 1. Replacement of spares for ceiling fan shall be measured and paid seperately] 2. Labour for Minor repairs of fan such as oiling, lubrication , fixing of loose connection, replacement of capacitor , regulator, switch etc must be rectified at the site and included in the rate quoted. 3. All the stationery i.e complaint register, related to the work shall be arranged and maintain by the contractor. the Complaint register shall be maintained as per the guideline directed and specified by JE or Engr-in-Charge.

Ditto all as per Ser Item No 54.00 above but for exhaust fan 300 / 450 mm sweep , metal/plastic body complete all as specified and directed.

Ditto all as per Ser Item No 54.00 above but for wall mounting fan any sweep complete all as specified and directed.

S&F in replacement of ceiling fan stator of size 1200/1400 mm sweep size match to existing fan rotor of any make as per site requirement complete all as specified and directed.

M&L for replacement of down rod complete of ceiling fan made of 15 mm dia MS pipe medium grade complete with bolts/Check nuts , washers etc upto 45 cm long complete all as specified and directed including drilling, threading all as reqd at site.

Supply and fix ball bearing SKF 6201 complete all as specified and directed.

Supply and fix ball bearing SKF 6202 complete all as specified and directed.

Supply and fix ball bearing SKF 6203 complete all as specified and directed.

Supply and fix ball bearing SKF 6204 complete all as specified and directed.

S&F Gunmetal bush complete all as specified and directed.

Supply and fix capacitor 2.5 Mfd /3.15 mfd complete all as specified and directed.

Supply and fix capacitor 4 Mfd complete all as specified and directed.

Supply and fix rubber reel with nuts bolts and split pin for ceiling fan complete all as specified and directed.

Supply and fixing PVC unsheathed 3 core cable copper flexible wire 0.5 Sqmm size complete all as specified and directed.

M&L for rewinding of ceiling fans of 1200 / 1400 mm sweep with exising size of copper winding with same number of turns complete with new mica shets/papter, varnishing, heating and testing after rewinding complete all as specified and directed.

M&L for rewinding of exhaust fans of 300 / 380 / 450 mm sweep with suitable size of copper winding wire of same gauge & number of turns complete with insulation complete all as specified and directed.

M&L for rewinding of wall fans of 400/450 mm sweep with suitable size of copper winding wire of same gauge & number of turns complete all as specified and directed.

M&L for rewinding of Pedestal fans of 400/450 mm sweep with existng size and gauge size of copper winding wih same number of turns complete with new mica sheets/Paper, varnishing, heating and testing after rewinding complete all as specified and directed.

S&F fan clamp with rubber seal, nut bolts and safety pin suitable for ceiling fan complete all as specified and directed.

Taking down Geyser from the its existing position (technical & domestic area o by disconnecting all connection, painting to geysers of any make/capacity after scrubbing and cleaning and painting with one coat of white enameled colour including wirting, MES No with black paint 20 mm letter size etc and reinstallation and connecting up complete all as specified and directed.

Supply and fix thermostat suitable for geyser of any make and any size complete all as specified and directed.

Supply and fix indicating neon lamps suitable for geyser complete all as specified and directed.

Supply and fix siphon assembly suitable for geyser of 25/50 ltrs capacity with including nuts bolts and washer suitable for geyser of any type and Make complete all as specified and directed.

Supply and fix PVC connecting pipe heavy duty 15 mm dia for inlet and outlet with brass coupling complete all as specified and directed.

Supply and fix geyser element 250 V 1.5 KW suitable for 25 ltrs capacity complete all as specified and directed.

Ditto all as per Ser Item No 78.00 above but for 35/50 Ltrs capacity of 2 KW complete all as specified and directed.

M&L for taking down of unserviceable geysr of capacity 25/50 ltrs from its existing position (techical & domestic area of AF Station lohegaon) and carry out the rectification such as taking out of copper/SS tank of geyser, brazing/welding of leakage part of the geyser. After rectification leak proof testing to be carried out and refixing the same geyser after complete rectification at the existing position using nut bolts, faster etc complete all as specified and directed.

Chaulya Enterprises

AMAN ENGINEERING AND ELECTRICAL WORKS

ASHWAMEDH ENGINEERS

metro electrical services

T.H.ASSOCIATES