Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.5 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING L1 BIDDER | |
| 2 | L2₹16.0 L+₹48,440 (3.13%)Rejected-AOC | L2 | Rejected-AOC HIGHER BID VALUE | |
| 3 | L3₹18.1 L+₹2.6 L (17.0%)Rejected-AOC | L3 | Rejected-AOC HIGHER BID VALUE | |
| 4 | L3₹18.1 L+₹2.6 L (17.0%)Rejected-AOC | L3 | Rejected-AOC HIGHER BID VALUE | |
| 5 | L4₹18.2 L+₹2.7 L (17.5%)Rejected-AOC 84 B LOWER BURDWAN COMPOUND RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | L4 | Rejected-AOC HIGHER BID VALUE |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
2 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE PANAGARH
HQ CWE PANAGARH, MES, PO - PANAGARH, DIST - BURDWAN, WB, PIN - 713420
REPAIR / MAINT OF IRP AND CLEANING OF OHTs AT PH 1 AREA UNDER GE PANAGARH
2022_MES_567247_1
8833/E8
Open Tender
Civil Works
Item Rate
180 days
PANAGARH
Pl refer Tender Documents
7 documents required · 7 mandatory
₹500
GE PANAGARH
₹60,000
Yes
31 Jan 2023
3 Dec 2022
4 Jan 2023
3 Dec 2022
2 Jan 2023
19 Dec 2022
Amount
M&L for cleaning of RCC/PS/GRP Over head tank / UG reservoir (Water) of 4,50,000 litres capacity (i.e 1,00,000 gallons) tanks at Pump House No 22 at Officers enclave, PH No 7 at Police line and SBI Line Pump House (tank hight 21 mtr) by Hi-Tech system using High Pressure jet Pump having putting minimum pressure of 150 Bar to clean all sludge on walls, floors, treating with Hydrogen peroxide and applying ultra violet rays to make the tank bacteria free (by using tanclean chemical) , complete all as specified and as directed. Note: (i) Rate are deemed for writing work i.e. tank clean on (date), (month) and (year), font size should be 30 cms. (ii) The item rate include including of any damage during cleaning of tank.
M&L for cleaning of RCC/PS/GRP Over head tank / UG reservoir (Water) of 10,000 litres to 25,000 litres capacity tanks at Pump House No-10 at DAD Pump house by Hi-Tech system using High Pressure jet Pump having putting minimum pressure of 150 Bar to clean all sludge on walls, floors, treating with Hydrogen peroxide and applying ultra violet rays to make the tank bacteria free (by using tanclean chemical) , complete all as specified and as directed. Note: (i) Rate are deemed for writing work i.e. tank clean on (date), (month) and (year), font size should be 30 cms. (ii) The item rate include including of any damage during cleaning of tank.
M&L for cleaning of Masonary Tank/PS Tank /GRP Tank of 50000 litres capacity at Pump House No NCC Camp (1 x50000 Litres), PH No- 18 GRP Tank (1 x 50000 Litres),Karen Line PH GRP Tank (1x50000 Litres) (Tank height 12 mtrs) by Hi-Tech system using High Pressure jet Pump having putting minimum pressure of 150 Bar to clean all sludge on walls, floors, treating with Hydrogen peroxide and applying ultra violet rays to make the tank bacteria free (by using tanclean chemical) , complete all as specified and as directed. Note: (i) Rate are deemed for writing work i.e. tank clean on (date), (month) and (year), font size should be 30 cms. (ii) The item rate include including of any damage during cleaning of tank.
Opening completely pressure filter & oxidation chamber of capacity 8000 GPH to 13500 GPH and taking out existing filter media (sand, gravells) stainers and nozzles, removing and depositing filter media to a distance not exceeding 50 m including necessary repair/welding to make the pressure filter vessels complete leak proof for improving the strength and finally reassembling the pressure filter including filling of new strainer, gravles & sand in existing position duly cleaned replacing worn out gasket and nut bolts and washers, complete all as specified and as directed. Note- Strainers, gravels shall be measured and paid seperatley under relevant items.
Material and labour for prepration of old painted steel/iron surfaces of pressure filter & oxidation chamber by scrapping and cleaning of External and internal surfaces and applying two coats of black bituminious anti corrosive paint internal surface suitable for drinking water and Navy blue paint on outer surface marking the date of cleaning on the body, complete all as specified and as directed.
Supply only PVC push type/threaded type strainer suitable for filteration plant ,complete all as specified and as directed.
Supply only special coarse sand passing through 3.125 x 1.56 mm mesh suitable for use in filteration plant ,complete all as specified and as directed.
Supply only special coarse sand passing through 1.6 x 3.2 mm mesh suitable for use in filteration plant, complete all as specified and as directed.
Supply only new washed, cleaned, dust free, gravel of grading 25 mm to 20 mm graded filter media suitable for use in filteration plant , complete all as specified and as directed.
Supply only new washed, cleaned, dust free, gravel of grading 20 mm to 12 mm graded filter media suitable for use in filteration plant , complete all as specified and as directed.
Supply only new washed, cleaned, dust free, gravel of grading 12 mm to 06 mm. graded filter media suitable for use in filteration plant , complete all as specified and as directed.
Supply only new washed, cleaned, dust free, gravel of grading 06 mm to 03 mm graded filter media suitable for use in filteration plant , complete all as specified and as directed.
Supply and fixing in layers mix of manganese dioxide (MnO2) and treated carbofil in lumps of size 20 mm to 15 mm containing 75% of manganese Dioxide and 25% KG carbofil suitable for use in filltration plant , complete all as specified and as directed.
Supply and fixing live catalytic media (green Sand) suitable for use in filltration plant, complete all as specified and as directed.
Cleaning overhead building service water tank (capacity of upto -5000 ltrs ) by high pressure and disinfections by ultraviolet radations and disposal of sludge at safe place. Rate also includes all labour, materials, equipment, plants and machinery etc complete in all respect. Total process of the cleaning comprises of following steps. (i) Cleaning of initial sludge and sedimentation etc and disposal of sludge in sludge tank carefully. (ii) Total high pressure cleanig with machines using special rotary high pressure cleaning for total removal of scaling, dirt and algae etc from the walls, pillars and flooring to thoroughly expose the original concrete wall/surface. (iii) Removal of sludge by labours. (iv) Removal of dirt, fine mud and fine particles etc. by industrial vaccum cleaner. (v) Sterilisation of walls, flooring by special anti bacterial agents for reductions of microbiological impurities. (vi) Final disinfection by special industrial ultraviolet radiations to ensure complete sterlisation of tanks. Note :- (i) Rate are deemed for writing work i.e. tank clean on (date), (month) and (year), font size should be 10 cms. (ii) Any damages of float valves and tanks due to negligence of work will be rectified by the contractor is own cost.
Repairing of defective C.I. Sluice/Butter Fly Valve (150 mm dia) of the plant & replacement of gland packing for smooth operation etc, complete all as specified and as directed.
Supply and fixing in repair's Butter fly valve PN-1.6 , 150 mm dia use in filltration plant, complete all as specified and as directed.
Supply and fixing in repair's Butter fly valve PN-1.6 , 100 mm dia use in filltration plant, complete all as specified and as directed.
Supply and fix in repair's 100 mm bore CI Sluice valve PN – 1.6 with Spindle Iron (Heavy duty) Wheel head and both ends flanged and MS nut bolts and washers and pair of rubber/fiber gasket and fixed in position, complete all as specified and as directed.
Supply and fix in repair's 150 mm bore CI Sluice valve PN – 1.6 with Spindle Iron (Heavy duty) Wheel head and both ends flanged and MS nut bolts and washers and pair of rubber/fiber gasket and fixed in position, complete all as specified and as directed.
Supply and fix in repair's reflux valve (non return valve IS -5312) CI suitable for 150 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with joint with rubber or fibre board gasket with required nos size of nuts, bolts and washers including connecting and testing , complete all as specifed and as directed.
Material and labour for opening of sluice valves 150 mm dia bore after de-scaling and grinding on Lathe Machine and replacement of Spindle, Gutka, valve sheet, brass rings as per existing and complete scaling and proper functioning at site refixing at existing postion inclcluding nut, bolt, washer, gasket, wheel, complete all as specified and as directed.
Testing of Water Samples for Chemical analysis as mentioned below from Pump Houses viz PH No - 18 (new RSD) ,PH No 7 (Police line), PH No 5(B Park), PH No -Karen Line, PH No 10, PH No-21 (SBI Line), PH No-Northen Pocket, PH No 22, PH No -20 ,DAD Pump house, complete all as specified and as directed. Following Test to be carried out: PH Level, Specific Conductivity, Chloride (CL), Total Harness as Ca CO₃ ,Iron as (FE), Arsenic (AS), Total dissolved solids, Bacteria, Colour, Odour, Taste, Turbidity NTU, Max, Floride, Copper, Nitrate, Alkalinity, E-Coliform, Total Coliform bacteria, Manganese, Sulfide, Calcium, Maagnesium, Cyanide, Lead, Cromium, Zinc, Aluminium, TSS, Oil and grease, Ca hardness, Mg hardness, P Alkalinity, Sodium , Potasium, Free Chloride sulphate. Notes: (a) Sample of Water for the above media test are to collected in transparent container/Jar/bottle separately for each test against each pump houses. (Hygienically clean bottles). (b) Sample of water to be collected shall be forwarded to Govt Lab / any NABL certified authorized Lab. (c) Testing of Raw water and Treated water in Each PH considered as One Job. (d) Testing of Water for Raw Water & Filtererd Water for total 12 Pump Houses in three month Basis.
M&L for DI pipe of 150 mm bore with spigot and socket end rubber gas cate joint(titon) centrifugally cast class k-7 conforming to IS 8329-2000 laid in trenches/ on surface/ over masonry pillar and connection to old or new position , Cost of joint included in the qoted rate inluding taking out old u/s one , complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repair's 50mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection in old or news position including fitting like socket /Union/Tee/Reducer Nipple etc, complete all as specified and as directed by Engineer-in-Charge.
S&F LED aviation light for Over Head Tank after taking out the old one, complete all as specified and as directed.
S&F GI strip 25 x 4 mm as earthing lead bolts nuts checknuts and washers, complete all as specified and as directed.
Materials and Labour for earthing with galvanised earth plate electode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of plate not less than 1.5 m below normal ground level, the earth plate surrounded by alternative layer of charcoal dust and salt with thickness of 150 mm to a packed thickness of 150 mm on all sides with and including necessary excavation earth work returning filling in and removal of surplus soil upto 50 mtr including galvanised iron strip 32 x 6 mm bolted and reverted to earth plate at one end and connected to continuous GI strip enxased in and including 40 mm dia GI medium grade protection pipe, 20 mm dia medium grade watering pipe with all fittings from top edge of earth plate upto 2400 mm above ground level fixed and including 25 x 3 mm GI clamp bolts, nuts and washer, funnel, wiremesh, PCC (1:3:6) type C1 earthing pit, 75 mm thick RCC cover slab reinforced with 8 mm dia TMT bar 100 c/c both ways complete all as specified and as directed including taking out old unserviceable earthing complete. Note : (i) If the desired earth resistance is not found, earthing shall be re-done by the contractor at no extra cost to the department. (ii) Testing to be carried out by the Contractor, entered in the earth testing register, prepared and to be maintained by the contractor & submitted to department. (iii) T&P and testing instrument (Earth tester) to be provided by the contractor at own cost. (iv) Quoted rate shall be deemed to include the cost of GI strip upto a distance of 7.5 metres from the earth plate. Strip required beyond the length shall be measured and paid separately.
Supply fixing , testing and commissioning of Motor Protection Relay for pump set panel suitable for (5-60Amps) consists of following specifications :- Technical Specifications: i. Thermal Over Load, ii. Over Current, iii. Short Circuit, iv. Earth Fault, v. Current Unbalance, vi. Dry Run/Under Current Protection, vii. Single Phasing Protection, viii. Phase Reversal, ix. Lock Rotor,x. Stall xi. Contactor Failure Protection, xii. 7 Segment Digital Display, xiii. Metering: Three Phase true RMS Current, Thermal Content and Unbalance Current, xiv. Bar Graph % of IFL, xv. LED Indication for RUN, TRIP and Fault POP UP, xvi. DO Matrix, xvii. 3 nos. Output Contact, xviii. Fault Record with Date and Time Stamp, xix. Build In CT up to 60A (1-5A and 5-60A), xx. Operating Supply Voltage- 220VAC, xxi. Motor Run Time, xxii. Trip Test Facility, xxiii. Password Protected, xxiv. 35mm DIN Rail Mounting Type xxv. Over All Dimension: 95*59*116 (W*H*D) in mm,, complete all as specified and as directed.
Taking out chlorine Dozing machine, transporting to workshop of manufacture or authorized dealer, dismantling the dozing plant, cleaning, disconnecting electric connection of all Job parts taking out all defective parts and supply and fix new parts for replacement ,reassembling, testing and re-fixing complete all as directed. Note: (i) Fixing rate deemed to be included in the quoted rate. (ii) Spare parts required will be measured and paid separately as "Supply only" here in after.
Supply only PVC dosing head assembly with suction and delivery with NRV for 25 LPH
Supply only PVC NRV set with glass ball for suction and delivery adopter.
Supply only PVC adopter for suction and delivery without NRV
Supply only PVC stainer washer type heavy duty or Y type stainer for suction.
Supply only Teflon gland square type 3 mm
Supply only Chemical oil seal with cap
Supply only Dosing aligator gear box 25 LPH
Supply only Plunger assembly without plunger dosing head 25 LPH
Supply only Plunger assembly with PVC dosing head complte 25 LPH
Supply only Heavy duty FRP Tank capacity 150 ltr.
Supply only Heavy duty PVC NRV for delivery line
Demolition of pre cast concrete masonry built in cement mortar including all quions, arches, pillars etc. but excluding ashler facing dressed stone work, complete all as specified and as directed.
M&L for demolition of cement concrete below or above ground level not exceeding 50 cm thickness, complete all as specified and as directed.
M&L for PCC 100 mm thick type B2 (1:4:8) aggregate as in sub base, complete all as specified and as directed.
M&L in cement concrete type B1 (1:2:4) 100 mm thick 20 mm aggregate as in floor finished even and smooth w/o using extra cement, complete all as specified and as directed.
Schedule of Credit
m/s friends construction
M/S SAIMON ENGINEERING
S S ENTERPRISE
UNITED BUILDERS
MS FORWARD BUILDERS E 32/10/KKD
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .