M and R to Construction of embankment along L/B of river Dhansiri at Lurukihat and Mitham Chapori for the year 2025-26.

Earth work in embankment by Mechanical means by truck carriage with locally available ordinary/normal soil excluding sandy and rocky soil free from roots & vegetation and filling in uniform layers not exceeding 25 cm thick including ploughing or roughening or benching the seats, removing all debries, breaking clods up to 4 cm cube, dressing as per design section and compaction in layers not exceeding 30 cm in thickness and core cutter soil test at every layer and every 500 m distance, etc. complete as directed. A. Compaction with three wheel static roller of 80-100 kN capacity For initial Lead up to 1.00 Km for all lifts.(Distance=1.00km)

Supply of geo-textile Tube (Mega containers) with minimum properties as mentioned below  Polymer : PP of 400 GSM or above  Tube Circumference = 10m + 5% (m)  Fill Port (diameter) = 30 to 45 CM  Tensile Strength (MD) ≥ 100 kN/m  Tensile Strength (CD) ≥ 100 kN/m  Elongation – MD ≤ 25%  AOS ≤ 0.180 mm  Permittivity ≥ 0.40 S-1  Length = 25 m

Filling of geo-tubes (25m long and 10m circumference) with sand of volume 176 cum by using mud pump not below the fill height of 1.60m as per drawing and technical specifications, binding the tube with 9mm nylon rope to jati bamboo pegs of length 2m placed 5m c/c along both sides of the tube and at both ends to keep the tube in position during filling, as specified and directed including all loading, unloading and handling charges and local carriage upto a distance of 250M, pumping slurry using mud pump from a distance upto 500m, etc. including setting up of the tube laying platform, complete as directed.

Fabrication of shutter's: M.S. Plate (6mm thickness for skin plate)

Fabrication of shutter's: M.S.Channel (175 x 90mm - for shutter vertical & horizontal stiffeners , frame etc.)

Fabrication of shutter's: M.S.Flat (50 X 6 mm for rubber seal fitting.)

Fabrication of shutter's: "J" type rubber seal - 125mm.

Fabrication of shutter's: M.S.Electrode - 8 swg.

Fabrication of shutter's: M.S.electrode - 10 swg.

Fabrication of shutter's: Antisol red oxide paint

Fabrication of shutter's: Red oxide primer.

Fabrication of shutter's: Turpentine oil.

Fabrication of shutter's: Nylon rope.

Fabrication of shutter's: Painting brush 3"11

Fabrication of shutter's: Steel wire Brush.

Fabrication of shutter's: Filled Oxygen Gas

Fabrication of shutter's: Filled D.A. Gas

Fabrication of shutter's: Waste cotton

Fabrication of shutter's: Diesel (for Arc Welding Generator sets.)

Fabrication of shutter's: Lubricating oil for welding sets.

Fabrication of shutter's: Nuts and Bolt (for rubber seal fitting)

Fabrication & Installation of operating and lifting system: Supply of M.S. Shaft (best quality)of dia - 63mm dia

Fabrication & Installation of operating and lifting system: Thread cutting (Square) 1 TPI/2 TPI including fine finishing and making hole in one end as per direction for sizes as given below - 63mm

Fabrication & Installation of operating and lifting system: C.I. Boss with internal thread cutting 1 TPI/2 TPI, making groove for bearing slot for lock plate and 1.5" drill for providing handle as per direction for the following sizes: (dia. × height) - 125 mm × 175 mm

Fabrication & Installation of operating and lifting system: H.D. Thrust ball bearing (Best quality) ISI specified a) 65mm.

Fabrication & Installation of operating and lifting system: M.S. base plate 300 mm × 300 mm of the following thickness as per direction including supply of materials. (Machine finished) - 12 mm thickness

Fabrication & Installation of operating and lifting system: M.S. lock plate 300 mm × 300 mm of the following thickness as per direction including supply of materials. (Machine finished) - 10 mm thickness

Fabrication & Installation of operating and lifting system: Clamp for lock plate.

Fabrication & Installation of operating and lifting system: M.S.Electrode - 8 swg.

Fabrication & Installation of operating and lifting system: M.S.electrode - 10 swg.

Fabrication & Installation of operating and lifting system: Nuts and Bolts (Assorted size).

Fabrication & Installation of operating and lifting system: M.S.Washer (Assorted size)

Fabrication & Installation of operating and lifting system: Shaft pin with length up to 150 mm for the following diameters b) 16 mm

Fabrication & Installation of operating and lifting system: Distant tube with pin of the following size (Machine finished) - a) 75 X 12mm

Fabrication & Installation of operating and lifting system: G.I. pipe of sizes a)25 mm dia

Fabrication & Installation of operating and lifting system: C.C. counter weight circular type 400 mm dia. around 100 mm thick with 25 mm dia. hole at centre & two handles for carrying weight of 30 Kg each as per direction (Machine finished)

Fabrication & Installation of operating and lifting system: Counter wieght holder 125 mm

Fabrication & Installation of operating and lifting system: Pulley stand made of 100 × 50 mm channel for (As per direction) - 125 mm

Fabrication & Installation of operating and lifting system: Pulley pin of 16 mm dia

Fabrication & Installation of operating and lifting system: Pulley stand made of 100 × 50 mm channel for (As per direction) - 150 mm

Fabrication & Installation of operating and lifting system: Steel wire rope (Tested quality) of the following sizes (ISI standard) - 16 mm

Fabrication & Installation of operating and lifting system: Making & supply of C.I. roller with suitable collar 10 -12 mm & centre hole 10 - 20 mm as per direction (Machine finished), size (dia. × height) - a) 100 mm × 150 mm

Fabrication & Installation of operating and lifting system: C.I. roller pin of length 150 mm to 250 mm dia. (Machine finished) - a) 16 mm

Fabrication & Installation of operating and lifting system: F' shaped roller bracket made of 10 mm thick plate of size 75 × 200 mm with hole as per direction to accommodate with the roller size: (Machine finished) - 100 mm x 150 mm

Fabrication and installation of Guide channel, Top and Bottom channel of the sluice : M.S. Channel (175 X 75 mm for installation of guide pairs for two openings.)

Fabrication and installation of Guide channel, Top and Bottom channel of the sluice : M.S Channel (175 X 75 mm for top and bottom channel.)

Fabrication and installation of Guide channel, Top and Bottom channel of the sluice : M.S. plate (10 mm for Guide channel , Tool Post bottom support.)

Fabrication and installation of Guide channel, Top and Bottom channel of the sluice : M.S. Plate (6 mm for Platform top covering of sluice)

Fabrication and installation of Guide channel, Top and Bottom channel of the sluice : M.S.Angle (75 X 75 X 8 mm for Tool post,anchoring.)

Fabrication and installation of Guide channel, Top and Bottom channel of the sluice : Nuts and Bolts (Assorted size )

Fabrication and installation of Guide channel, Top and Bottom channel of the sluice : Filled Oxygen Gas

Fabrication and installation of Guide channel, Top and Bottom channel of the sluice : Filled D.A. Gas

Fabrication and installation of Guide channel, Top and Bottom channel of the sluice : M.S. Washer

Fabrication and installation of Guide channel, Top and Bottom channel of the sluice : MS Rod

Fabrication and installation of Guide channel, Top and Bottom channel of the sluice : Separator stud with nut on both end with tube of length 250 mm to 460 mm

Fabrication and installation of Guide channel, Top and Bottom channel of the sluice : M.S.Electrode - 8 swg.

Fabrication and installation of Guide channel, Top and Bottom channel of the sluice : M.S.electrode - 10 swg.

Fabrication charges & Commissioning items for the work : Skilled labours (other than ITI certificate holder)(to be engaged for fabricarion , Arc welding works & Gas cutting, Measuring & fine finishing during fabrication & installation of the mechanical part of sluice gate)

Fabrication charges & Commissioning items for the work : Ordinary/unskilled labour (to be engaged for carrying & handling of sluice gate materials, various assisting works during fabrication & installation etc.)

Fabrication charges & Commissioning items for the work : Arc welding holder, 400/600 Amp

Fabrication charges & Commissioning items for the work : Arc welding mask.

Fabrication charges & Commissioning items for the work : Arc welding dark glass.

Fabrication charges & Commissioning items for the work : Arc welding cable, 400/600 Amp

Fabrication charges & Commissioning items for the work : Lubricating oil

Fabrication charges & Commissioning items for the work : Gas cutting hose, 12 mm dia. (Red & Black)

Fabrication charges & Commissioning items for the work : W.B. Grease

Fabrication charges & Commissioning items for the work : Nuts and Bolts (Assorted size).

Fabrication charges & Commissioning items for the work : M.S.Washer. (Assorted Size)

Fabrication charges & Commissioning items for the work : Leather hand gloves

Fabrication charges & Commissioning items for the work : Nylon rope

Fabrication charges & Commissioning items for the work : Matured Jati Bamboo 75 mm to 100 mm dia. and 6 m to 7 m long

Fabrication charges & Commissioning items for the work : Matured Bholuka Bamboo 100 mm to 150 mm dia. and 7 m to 8 m long

Fabrication charges & Commissioning items for the work : Antisol red oxide paint

Fabrication charges & Commissioning items for the work : Red oxide primer (for guide channels& other iron structures etc.)

Fabrication charges & Commissioning items for the work : Turpentine oil.

Fabrication charges & Commissioning items for the work : Gas cutting Kit (Including Oxygen meter, Acetylene meter, cutting torch, regulator etc.)

Fabrication charges & Commissioning items for the work : G.I. wire 22 SWG

Fabrication charges & Commissioning items for the work : M.S. Chain of size 8 mm

Fabrication charges & Commissioning items for the work : Lock & Key of size - 55 mm

Fabrication charges & Commissioning items for the work : Hacksaw blade 1.5" × 12", (D/E)

Fabrication charges & Commissioning items for the work : Diesel (for various fabrication work , carrying of generator and T&P materials to site and vice-versa)

Fabrication charges & Commissioning items for the work : Gas cutting nozzle.

Fabrication charges & Commissioning items for the work : Hire charges of diesel trucks with driver and helper but excluding fuel and lubricant. ( 2 Ton Capacity)

Fabrication charges & Commissioning items for the work : Hire charge of Crane with capacity 3 ton with operator excluding fuel & lubricant.

Fabrication charges & Commissioning items for the work : Hire charge of 25 KVA diesel generating set with operator and POL

Fabrication charges & Commissioning items for the work : First Aid kit (comprising of items like Band - Aid, Dettol 100 ml, Iodine solution, Antiseptic cream, Scissor, Cotton, Bandage, Burnol, Spray etc. complete).

Please Enable Macros to View BoQ information