REPAIRS TO FLOORING JOINERY PLASTER PLUMBING AND SANITARY WORKS AND CERTAIN BR REPAIR TO OTM ACCOMMODATION AT OLD NAVY NAGAR UNDER AGE BRI OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Taking down chowkats or frame of any description or specification (wooden/iron/aluminium) (w/o taking off shutters from the frames) but not exc 1.50 each.

all as per item No 1.00 above but exc 1.50 but n.exc 4.00 Sqm each

S &F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S & F 30 mm thick Flush shutters, solid core construction, with particle board core both face is covered with decorative face veneer with lipping/ frame to match

Cutting holes in brick walls built in cement mortar or cement lime mortar not exc. half brick for inserting hold fasrt and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required

M & L MS works in holdfast made of Fe -290 of length

S & F Aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm length.

S & F Aluminium handles, cast type, anodised of length 150 mm

S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of length 300 mm.

S & F SS butt hinges 100 mm size

Preparing new wooden surfaces over 10cm width and girth and applying two coats of synthetic enamel paint over a coat of pink primer complete

S&F Anodised aluminium door shutters, Windows shutters aluminium section weighing 0.55 kg/m including necessary Plain Glass 4 mm thick joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Supply and fix aluminium anodised ventilators partly fixed partly louvered including aluminium louveres, frosted glass panes, necessary jamming, glazing pins, neoprene beading, glazing pin screw, rollers, handle etc complete all as specified & directed by Engineer-in-Charge.

S&F aluminium anodised section ( minimum thickness of anodising 15 micron) for windows/ ventilators etc of sliding type comprising frame, shutters, locking arrangements including necessary jamming glazing pins neoprene beading glazing pin screw,rollers,handle etc complete all as specified & directed by Engr-incharge

S&F in repair aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed. Note :- Rate inclusive of fixing wire cloth in wooden as well as in aluminium frame .

S & F as in repair aluminium grills with and including suitable aluminium anodised frame F/H section as required manufactured by M/S Decogrill as per design No DG-104 7.5 mm thick all as specified and directed.

S & F as in repair aluminium extruded section body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed.

S&F as in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F Mortice lock, vertical type, size 100mm, brass 4 levers with escutcheon plates & two keys complete in repair

S&F as in repair 12 mm thick toughened glass panels exc 0.5 Sqm and n.exc 1.5 Sqm each, joints sealed with clear silicon silicate gel to make water tight, edges with diamond cut including taper drilling to flush the screws/ fittings etc as in partition wall all as specified and directed.

S&F as in repair stainless steel decorative type handle for wooden Door/Glass door of size 600 mm long as approved by GE.

S&F as in repair stainless steel decorative type handle for wooden Door/glass door of size 300 mm long as approved by GE.

M&L Water proofing treatment of external walls / chajjas by applying two coats of elastomeric coating material after cleaning the surface thoroughly and sealing all cracks with acrylic sealing compound as per the manufacturer’s specifications and directions of Consultant/Architect. Make : Build core chemicals or equivalent

Dismantling floor, hearth, or wall tiling / stone (marble, granite, kota etc) incuding cement mortar bedding with backing etc & rubbish off the premises complete all as specified & directed

M&L rendering 10mm thick in CM (1:4) as in backing /bedding layer to wall tiling.

M&L 20 mm thick screed bed or bedding layer of mortar in CM 1:6 in floors etc all as specified.

S & F glass mosaic tiles of size 25mm x 25 mm jointed & pointed with white cement mixed with admixture to match with the colour of tiles including Acid cleaning as in vertical & horizontal surfaces.

Dismantling stone slab including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L for granite 18 to 20mm thick (of any type) table rubbed and polished) as in floor such as steps, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Labour only for bull nosing/ chamfering & polishing of edges Kota/ Granite stone slabs

S & F designer wall tiles of 12 mm thick set & jointed in neat cement slurry & pointed in white cement mixed with colour pigment to match the colour of tiles over and including 15 mm thick cement plaster in CM 1:4 complete all as specified & directed by Engr-in- Charge. (Pattern and design of the tile shall be as per approval of Garrison Engineer (NW) )

M&L vitrified ceramic tiles 10 mm thick dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors & wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile 10 mm thick screed bed or bedding layer of mortar in CM 1:6 in floors etc all as specified. etc complete all as specified & directed.

M&L machine cut and machine polished kota stone slab 20 to 25mm thick as in flooring laid and jointed in neat grey cement slurry and pointed with grey cement and pigments to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.

S&F Non skid coloured ceramic tiles exc 0.11 Sqm but n.exc .18 Sqm in floors etc set & jointed in neat cement slurry and pointed in white cement mixed with colour pigments to match the coloured tiles all as specified.

S&F glazed coloured ceramic tiles 300 x 200 x 6 to 7 mm thick set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the coloure of tile as in veritical surfaces complete.

S&F as in repair vitreous china squatting pan Orissa Pattern, size 580 x 440mm white with integral foot rest any patten all as specified,

S & F in repair 10 litres capacity PVC china valveless, syphonic action type, flushing cistern, low level, white or in any colour with inlet, ball valve, float and handle incl. brackets

Taking down AC rain water pipe any size or pattern incl all fittings heads, shoes, bends. Swan necks, etc including cleaning for refixing or removing to store.

S&F PVC (SWR) 110 mm bore pipes single socketed, in any lengths with rubber ring joints, fixed to wall with PVC clamp complete all as specified and directed.

S&F 110 mm bore PVC (SWR) branch piece single 'Y' equal or unequal with acess door complete all as specified and directed.

S&F in repair vitreous china WHB, white, flat back, size 630x450mm with brackets and PVC connection, 15 mm dia 600mm length with flexible inlet pipe, brass chromium plated waste coupling etc complete.

S & F 15 mm bore Pillar taps,fancy, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe.

Taking down cement plaster of any description including racking out joints hacking for key scrubbing down with water & removed debrises out MD land.

M&L rendering 15mm thick in CM (1:6) on wall finished even and fair without using extra cement as in patches all as specified and directed by Engineer-in- Charge.

All as per Item No 44.00 above but on ceiling plaster 5 mm thick CM1:3 all as specified.

M&L for preparing newly plastered surfaces of ceiling applying three coats of white wash

M&L for preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer all as specified and as directed

M&L applying two coats of oil bound distemper on old plastered surfaces including preparation of surfaces as in wall all as specified.

M&L applying two coats of white wash on old ceiling surface including preparation of surfaces all as specified.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Demolition of Plain cement Concrete of any description and in any position not otherwise specifically provided for including china mosaic & wc

M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical sides of sunken floors. (Note : WPC shall be measured and paid seperately)

M&L cement concrete 1:7:12 with with 40mm graded stone coarse aggregate in sunken floor 150mm thick all as specified and directed.

Supply only water proofing compound of ISI marked

S &F in repairs Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)

Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M & L Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 40 mm thick in flooring, all as speciifed and directed

Demolition brick work built cement mortar in any description any position complete.

M&L brick work with sub class `B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4.

M&L plastering 20mm thick in CM 1:4 on brick or concrete surfaces on walls in two coats, first coat 10mm thick & second coat 10mm thick mixed with water proofing compound finished fair & even complete all as specified. (Note: WPC will be measured & paid separetaly.)

M&L preparing new or old plastered surfaces of wall and applying two coats of weather proof acrylic based paint (100% Acrylic) exterior grade over a coat of primer complete all as specified and as directed. (Note: - Rates are inclusive of provision and removal of steel scaffolding at any height. No extra cost to be paid for steel scaffolding)

M&L applying two coats of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth all as specified.

S & F in repairs Pillar taps of 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

sri ram construction

I.J Enterprises