Providing special repair works to the Modern Control Room at City AR campus in Salem City.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

39 : S & F of M.s Grills

41 : Painting - New "iron work"

WATER SUPPLY ARRANGEMENTS 51.1: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 700 litres (excluding free board) of approved brand (superior variety) with ISI Mark

55.1 : Supplying and fixing of approved brand Porcelain squat urinal superior variety

55.2 : Supplying and fixing of approved brand Porcelain Flat Back Urinal

ANNEXURE-I 2.1.1 : Supplying and filling with Gravel

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

6.2.1 : Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") (using crushed stone sand) with admixture

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Ground Floor

9.2.1 Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand) with admixture using Chamber burnt bricks of size 9"x4½"X3" (23x11.4x7.5cm) for super structure in the following floors a) In Ground Floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation and basement

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

c.For Square and rectangular columns and small quantities

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) including plasticizer

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) including plasticizer

38.7 : Plastic Emulsion PAINT including primer for inner walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.1.1 : PVC Water supply (ASTM) with UPVC Specials a. 32 mm dia

b. 25 mm dia

c. 20 mm dia

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

77.2.1 : S & F of 20 amps DP plug & Socket in sheet enclosure with 32 A DP MCB in flush wall with earth connection(For AC Plug)(Legrand (MDS)/Hager (L&T) equalivalent /superior variety

211.2: Clean removal of the old cement plastering both inside and outside from the existing walls of brick masonry without damaging the existing structure and surroundings and clearing the debris away from the site including cost of required tools and plant and necessary scaffolding if necessary etc., all complete in all respect and as directed by the departmental officers.

218: Dismantling the damaged pressed tiles in cement mortar without affecting the adjacent structures in all floors including the cost of required tools and plants and clearing the debris away from the site etc., all complete and as directed by the departmental officers.

224: Dismantling RCC by manual / by using deploying machineries without affecting the adjacent structures, including the cost of required tools and plants and clearing the debris away from the site etc., all complete.

367: Providing wooden (melamine) polish for new wood

ANNEXURE - II A1: Painting two coats for old wall with ready mixed PLASTIC EMULSION PAINT of first class quality paint of approved colour and shade, including cost of materials, Scrapping,necessary brushes, labour charges, patty etc.,

A2: Painting the old Iron work and other similar works such as steel windows ventilators and grills with two coats of approved Ist class synthetic enamel ready mixed paint of approved quality and brand, through scrapping including cost of paint, brushes labour charges etc., complete. (The quality and the brand of paint should be got approved by the Executive Engineer before use) complying with relevant Standard specifications.

A3: Painting the old wood work with two coats of approved Ist class synthetic enamel paint including clean removal of old paint using sand paper as required by the departmental officers including cost of paint, brushes labour charges etc., all complete as directed by the departmental officers. (The quality and the shade of paint should be got approved by the Executive Engineer before use) complying with relevant standard specifications.

A4: Painting the old walls with two coats of oil bound distemper of approved brand over the existing cement plastered wall surfaces including cost of paint, putty, brushes, watering, curing, through scrapping etc. all complete and as directed by the departmental officers.

A5: Plastering in C.M. 1:5, 20mm tk. for old walls finished with neat cement (using crushed stone sand) including plasticizer

A6: Supplying and fixing of SFRC manhole Cover with frame of size 600mm x 600mm with locking arrangements including of all cost etc., all complete and as directed by the departmental officers.

A7: Supplying, laying, fixing and jointing the following dia Gun Metal Gate valve including the cost of suitable PVC/GI specials /GM specials a. 32mm dia Gun Metal Gate Valve

b. 25mm dia Gun Metal Gate Valve

A8: Supplying and fixing of CP Two Way Bib Cock with Health Faucet of Best quality including cost of fittings with required specials, bends, labour for fixing etc., all complete and as directed by the departmental officers. (The quality and brand of fittings should be got approved from Executive Engineer before use).

A9: Supply and fixing of CI gratings of best approved quality including the cost of all materials, labour for fixing etc., complete.

A10: Removing of existing damaged Wooden Flooring including cost of necessary cutting, materials, labour for heating, removing and disposing the dismantled waste away from the site etc., and as directed by the departmental officers.

A11: Supplying and laying wooden flooring at site 8mm thick of approved make using click laminated floor with inbuilt 3mm sound bloc class of use 31 water resistant AC 3 grade impact resistant IC3 (as per EN 130 900 / 1400) having 0.60mm MLC (Multi-Layer Guard + SRSG 2) (Scratch Resistant Surface Second Generation) on top of moisture high density fibre board substrate specially developed copr of plank size 1288 x 196 x 8mm having joints tongue and groove to secure long lasting joint. The tongue and groove having the edges duly pre impregnated with par affine including laying 0.20mm thick alkali resistant polyethylene sheet of density 850 kg / m3 beneath the laminated wooden panel to absorb the sound caused including labour charges, loading, unloading, transportation etc., all complete and as directed by the departmental officers.

A12: Water proofing treatment over the wall surface and floors by throughly cleaning and washing after that filling the hollow portion with cement sand mixed with water proofing compound, it dry for 2 to 3hours then apply two coats of exterior water proofing coat first coat at the rate of 25 sqft/litre and allow it dry before taking up the second coat with minimum drying time between first and second coat will be 4 to 6 hours then allow the system to air curing for 7days minimum and quaranteed in 5 years

A13: SUPPLY & INSTALLATION OF AIR-CONDITIONER WITH COPPER COIL 2.0 TR Split Type AC Unit - 5 Star Rated (5 Star Rated) and necessary required materails for fixing on wall, labour charges for fixing, drilling walls, making to running condition etc., all complete and as directed by the department officers.

A14: Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay etc., all complete and as directed by the department officers.

A15: Supplying and fixing of Automatic Electrical Water Heater with copper container, with Glass Wool / Puf Insulation with MS powder coated shell suitable for 25 Litres capacity 230V / 1000W (Higher End)

A16: Supplying and fixing of Hydraulic Door Closer of various sizes of approved quality using Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer with Double Speed Adjustment like HARDWYN (make) ‘GAZEL’ (or) Equivalent (with ISI Monogram)

A17: Servicing 40kVA Diesel Generator set Rewinding work & Oil Service Work which includes 40kVA, 3 Phase 50HZ, 415 Volts Set Alternator Rewinding Works, 40kVA Alternator Rewinding Works, 40 kVA Alternator Removing, Fixing, Oil Sevice, Labour charges, Transporting & Testing charges, Providing 2 Nos Door Inches, Service Filter Kit, 13 Litre Engine Oil 15W/40, Door Glass Work, Diesel Level Flout etc., all complete and as directed by the departmental officers

A18: Cleaning the existing Blocked chamber and disposing the waste including rate for cleaning blockages between chambers, removing and refixing of precast slab etc., as directed by the department officers

A19: Cleaning the existing septic tank such as sewage waste and liquid using 6000 litres capacity tank vehicles and disposing the same away from the site including hire and conveyance charges for the vehicle, labours all tools and plants employed there of as directed by the departmental officers.

A20: Removing the weeds filled in the entire length of Sullage/strom drain including all tools and plants employed there of as directed by the department officers

A21: Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level (Using Hilux Board Plain Sheets (10mm thick))

A22: Clearing Light Jungle including charges for tools, labours, cleairing site after jungle clearence etc., and as directed by the departmental officers.

A23: Supplying and fixing of Colour bare Galvilume sheet of 0.47 mm thick of best approved quality and brand including cost of labour charges for fixing in position over the GI pipes with bolts, nuts etc., all complete and as direted by the departmental officers.(The brand and quality of GI pipe should be got approved from the EE before use)

A24: Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

A25: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A26: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) Charges for fixing 25W LED lamp street light fittings

A27: Supply, assembling and fixing of 4’ 40 W Twin Mirror Optic Recessed Mounting Type Fitting (Lower End) DECORATIVE TWIN FLUORESCENT TYPE FITTING including cost of all materials and labour for fixing in position and as directed by the departmental officers

A28: Supplying and fixing of Heritage Mangalore Tiles size 10” x 16” including charges for transportion, properly fixing in necessary position without damaging the existing structure etc., and as directed by the departmental officers.

A29: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (open wiring) a. Light Point with ceiling rose.

A30: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming to IS: 694/1990, for 5 amps 5 pin plug socket point at Convenient places (open wiring)

A31: Run of 2 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming to IS: 694/1990, (Open Wiring)

A32: Run of main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming to IS: 694/1990, (Open Wiring)

A33: Run of main with 2 wires of 2.5 sq.mm. copper PVC insulated unsheathed single core 1.1 kv grade cable with continuous earth by means of 1.5 sqm copper PVC insulated unsheathed single core1.1. kv. grade cable (open wiring)

S Kumar and Co (BID ID -1244066)