Supply Installation Testing and Commissioning of the Indoor Outdoor Swichgear and 11kV Bays at Receiving station Qammar

Amount

SITC of 100kVA, 33/0.433kV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Copper wound)

SITC of 11 Mtr. Long Pole ( ST-410 SP56)

Cement Concrete bottoming of 1:2:4 mix as per Standards 0.66cum/poleincluding cost of materials.

SITC of 33kV, Lightening Arrestor,(33kV ,10kA ,Station class, ZnO, Polymer) gapless

SITC of 33kV Isolator, with Earthing Blade (36kV, 800A, Outdoor, 3 poles, 25kA).

Supply ,testing installation and commissioning of 33kV Drop Out Fuse set

Supply and fixing of Galvanised iron of sorts

Supply and fixing of Galvanized Nuts & Bolts of sizes

SITC of 120mm² XLPE LT Cable 1-Core, armoured, FRLS

Supply ,Installation and fixing of Indoor/Outdoor Heat ShrinkAble Cable Termination Kits 1-core 120mm2

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover including cost of materials

SITC of LT Distribution Box for 100 kVA DTR with 160 Amp MCCB 3P 16 kA for incomer & 100 Amp MCCB 3P 16 kA 2 No.s for Outgoing Circuits.

Supply and fixing of Earthing of 11mtr. Pole Complete by GI Pipe/ Rod 40mm 3 mtr long through GI Strip 25x3mm

Supply & Painting of Poles with Red Oxide Primer including cost of materials

Supply & Painting of Poles with two or more coats of Aluminium Paint including cost of materials.

SITC of 33kV Polymeric composite Disc Insulator 36kV, Lightening Impulse 170kV Positive and 180kV Negative, creepage distance 900mm,min failing load 70kN

SITC of GI Earth wire 7/4.00 mm sq.

SITC of GI flat for earthing 50x6 mm

SITC of 33kV Vacuum Circuit Breaker (36kV, 1250A, 26.2kA, Outdoor Type) to be installed at LILO at Nowgam Station.

SITC of 33kV C&R Panel along with O/C, E/F ,REF and differential relays (IEC61850), mimic diagram, Voltmeter, Ammeter, Annunciation Windows with annunciation relays, 3-phase Tri-vector meter-5 Amps, DLMS Compliant with RS-485 port to be installed at LILO at Nowgam Station.

SITC of 33kV Isolator with Earthing Blade (36kV, 800A, Outdoor,3 poles, 25kA) to be installed at LILO at Nowgam Station.

SITC of 33kV Current Transformer (33kV, 1-Φ, Multi Ratio Multi Core, Outdoor) (1 No. per Φ)

SITC of 33kV Voltage Transformer (33kV/110V, 1-Φ, Multi-Core, Outdoor), (1No. per Φ) to be installed at LILO at Nowgam Station.

SITC of 33kV Lightening Arrestors (33kV, 10kA, Station class, ZnO, Polymer) gap less (1 No. per Φ) to be installed at LILO at Nowgam Station.

SITC of 33kV 10kN Polymer Post Insulator 36kV,170kV Impulse, creepage distance 1224m to be installed at LILO at Nowgam Station.

SITC of 12 Core 2.5 mm² Control cable copper Armoured , 1.1kV Grade, ISI, FRLS to be installed at LILO at Nowgam Station.

SITC of 6 Core 2.5 mm² Control cable copper Armoured , 1.1kV Grade, ISI, FRLS to be installed at LILO at Nowgam Station.

4 Core 2.5 mm² Control cable copper Armoured , 1.1kV Grade, ISI, FRLS.

SITC of a). Ba). Battery Bank 30 V,100 AH , of 15 No. cells of 2 V each, sealed maintenance free VRLA type,High impact Polyprophelene copolymer container,flame retardants as required at site. b). 30V,100 AH , Float-Cum-Boost Charger With Full wave rectification for 220 V, 1Phase, 50 HZ AC Input Supply . t & output and other acessories as required at site.

SITC of Distribution Panel (30 V, DC) made of CRCA thickness not less than 2mm. Powder Coated, degree of protection IP43 for 2 No battery incoming supply with 2 No 63 Amps DP MCBs for incoming supply Double busbar of adequate size, 12 No DP DC MCB (0-32A) including indication lamps and cables and other accessories

SITC of Distribution Panel (415V, AC) made of CRCA thickness not less than 2mm, Powder Coated, degree of protection IP43. 200 Amps Switch Fuse disconnector for incoming supply and 15 No TPN MCB's (16-125 Amps ) and 5 No DP MCBs (0-32A), rectangular busbar suitable for 200 Amps continuous Supply including indication lamps and cables and other accessories.

SITC of Telecomunation Facilities (Broadband Wi-fi Type)

Mechanical Tool Kit comprising of 0-72mm Goti set, 0-72mm Ring set, 0-72mm D-spaner set Heavy duty Plyer set, Secrew Driver set, Cable Crimping tool (Hydraulic) up to 630mm2 1 No., 25mm Hammer Drill with Steel bit set, Steel step cone bits, Cement & Wood cutting bit sets 1 set, Slide & Pipe wranchs 2 No. each, Honda Brush Cutter 1 No., 1.5Kg Hammer 2 no., Nylon goti Hammer 2 No., Jigsaw 1 No., Cable cutting tool for 150mm2 2 No. etc. etc. as per instructions of Engineer incharge stricketly.

Electrical Tool Kit comprising of Plier setof 6 pliers, Secrew Driver Set 2 sets, Solder with acessories 2 No. Wire cutter and scraper2 N0. each, Makita Cordless (Battery operated) 3 in 1 Heavy duty impact Drill 1 No., Makita Cordless (Battery operated) Impact Wrench 1 No. Slide wranch 2 No. HD, Insulation resistance tester (Mager) 1 No. Earth resitivity tester 1 No., Clamp Meter 2 No., Multimeter 2 No., LnKey set 2 sets (HD), small wire crimping tool (0-16mm) 2 No., RJ-45 criping tool 2 No. etc. etc. as per instructions of Engineer Incharge.

Supply, installation, testing & commissioning of all weather air conditioning system (1.5 ton Inverter Hot & cold AC) 1 No., LED 42 inch smart TV 1 No. & Wall clock 2 No.

Supply of Furniture & Furnishing for Control room including Beding(Denlop Matress with Pillows, Qulit, Blanket, Bed sheets etc. 4 No. each) , Curtains with accessories 10 sets, UPVC cupboard 8'x4' for kitchen 2 No., Plastic Chair & Table set with central Umbralla (8+1+1) Cello make, Usha Heat Convector 2 No. Sleepers 4 No. Vacume Cleaner (Makita VC2000L Vaccum Cleaner 20L,1000W) 1 No.

Supply of Kitchen Utensills like Induction Heater & Coker 1 No. each, 3 Burner Gas Stove with 14Kg Domastic Gas Clyinder with documents, Pressure Coker 2 No, Table Spone 6 No, Serving Spone 4 No. Bunton 2 No, Fry pan 2 No, serving bowls 6 No, Plates 10 No, Quarter plates 6 No, Steel Glass & Jug set 1 set, Cup & Plate set 1set, Thormos Flask 2 No. Power Kettle 1.5 Ltr. 1 No, Tray 3 No. Borosill Glass set 6 No, Stainless Steel Tope Patila Set of 5 Pieces, Stainless Steel Kitchen Rack 2 No, Masala Containers 12 pices. etc as per site requirment and instructions of Engineer incharge.

SITC of Rubber mat 1mx2m 19mm thick

SITC of Fire extingusher Co2 type of 4.5 Kg capacity for control room

SITC of 3 Sand Bucket fire extinguisher

Supply of Helmet

Supply of Rubber Gloves for 33 KV level

Supply of Rubber Gloves for 11 KV level

Supply of Safety Belt

Supply of Safety Shoes (Ankle Boot)

Supply of Search Lights Heavy Duty

Supply of Earthing Rod 5 mtr long with 25 sqmm cable 12 mtr.

Supply of HV detector all voltages

Supply of Alminium Ladder 2x20'=40', 5mm thick (extendable with rope and pully arrangement)

Supply,installation, testing and laying of 100 mm² ACSR Conductor

SITC of 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

SITC of 11kV Polymeric composite Disc Insulator 12kV, min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

SITC of 11kV Isolator, Double Break,3-pole, 630Amp, horizontal mounting Type, with Earth Switch.

SITC of 11kV Gapless Surge Arrestor, 9kV, 10kA, LA with polymer housing, Stn. Type

SITC of 11kV 3-Core, XLPE, armoured, FRLS, 400 mm² for four outgoing feeders of 6.3 MVA Power Transformer.

SITC of 11kV 400mm2 Heat ShrinkAble Outdoor Cable Termination Kits

SITC of 11kV 400mm2 Indoor Heat ShrinkAble Cable Termination Kits

Supply and fixing of Danger Plates with clamps

Supply and fixing of Anti-Climbing Device with Clamps

Supply and fixing of Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 3 mtr long through GI Strip (25x3)mm

SITC of 12 mtr Long GI (65 micron DFT single dip) octagonal poles uniformally tappered with thickness of 3mm with bottom/top Dia of 175mmx70mm & base plate of 275x275x16mm/pcd 250 mm provided with proper door opened gear box for connections on the bottom side with G.I. Foundation Bolts (J Type) M24x750 mm long (Set of 4 no.’s per pole)

Laying of RCC foundation for 12 mtr. Long Octagonal poles including proper curing. 0.6mX0.6mX1.2m (RCC with concrete ratio 1:1.5:3 with minimum 8 Nos. of 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 150 mm C.C for fixing the pole) including cost of materials.

SITC of Earthing of Octagonal Pole Complete by GI Pipe 40 mm or GI Rod 20mm 3 mtr long through GI Strip (25x3)mm

SITC of Pre fabricated galvanized double way top bracket (1500mm long with 48.3 OD GI Pipe) to be fitted on top of Octogonal pole for holding lighting with 120o apart from each other.

SITC of DK thermoplastic cable Junction/Termination T boxes 8"x10"of class IP55/IP65 fitted with two 2-5 Amp MCB strip,4-way terminal block/ connectors Incl. copper lugs, Clamps ,nut & bolts washers etc (Hansel or equivalent make) or poles with two way type bracket to be fitted properly inside the door opened gear box provided on the bottom side of the pole.

SITC of 250 Watt LED Luminaries of IP 67 protection

SITC of Surge Protector for the 120/190 watt LED type lighting fixture complete.

SITC of 3x1.5 mm2 PVC insulated multistrand flexible copper wire for service connections from connection plate to the LED luminary indidual circuit including loop & earthings laid properly.

SITC of LT 16mm2 4-core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains including cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping.

SITC of Dust/rain/snow-proof canopy type mini-outdoor LT feeder panel of size 450X300mm with front door opening duly powdered colour coated with inbuilt 2No TPN 16-32 Amp MCCB,TPN busbars of same capacity installed on cement concrete block with 4 angle iron legs grouted in the cement concrete of termination of main 25sqmm cable and outgoing 25/16 sqmm cable circuits.