For repair of existing 02 ORs Toilet Blocks consisting of 17 Toilet at Hq 84 Bn Chatha Jammu JK

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kind soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : 1:5:10(1 cement : 5 coarse sand (Zone-III)derived from natural source: 10 graded stone aggregate 40mm nominal size derived from natural sources)

1:3:6(1 cement : 3 coarse sand (Zone-III)derived from natural source: 6 graded stone aggregate 40mm nominal size derived from natural sources)

Centering and shuttering including strutting , propping etc. and removal of form work for :Suspended floors, roofs, landings, balconies and access platform

Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement:4 coarse sand)

12mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand)

Reinforced cement work in beams, suspended floors, roofs having slope upto 15” landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1,5:3 (1 cement: 1.5 coarse sand (zone-III)derived from natural sources 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-mechanically treated bars of grade fe-500D or more.

C.I. Rectangular cover 455x610 mm with frame (low duty)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting , hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or including butt welded tubes

Providing and placing on terrace (at all floor level) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing Chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia pipes

20 mm nominal dia pipes

Constructing brick masonry chamber for underground C I inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) CI cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) RCC top slab with 1:1.5:3 mix( 1 cement: 1.5 fine sand:3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design. Inside dimensions 455x610 mm and 45 cm deep for single pipe line: with common burnt clay FPS (non-modular) bricks or class designation 7.5

Providing and fixing PVC Pipe of 100 mm dia (waste pipe) including all fitting and accessories as per direction of engineer in charge

Providing and fixing PVC low level flushing cistern with manually controlled device(handle lever) conforming to IS:7231, with all fitting and fixtures complete, 10 litre capacity-White

Providing and fixing PTMT extension nipple for water tank pipe, fitting or approved quality and colour 20 mm nominal bore, weighing not less than 40 gm.

Providing and fixing plasticised PVC connection pipe with PTMT Nuts, collar and bush of approved quality and colour, 15 mm nominal bore with 45 cm length

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gm

Providing and fixing PTMT bib cock of approved quality and colour, 15 mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing 09 watt LED Bulb