SPECIAL REPAIRS TO AV HALL, TOILETS AND OTHER SANCTIONED WORKS AT ARMY PUBLIC SCHOOL KAMPTEE.

Amount

Surface dressing not exc 15cm deep and getting out in soft /loose soil complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good to surface complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St. 240 complete all as specified and directed.

M&L for 11 to 15mm dia mild screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 but not exc 10cm long complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron work of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide primer in any tint complete all as specified and directed.

Dismantling of asbestos cement sheet (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed.

S&F 6mm thick non asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L type or J type or cranked hook bolts complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges complete all as specified and directed.

M&L hard core (broken stone/ boulders) of gauge not exc 63mm deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for cement concrete 75mm thick type D2 1:4:8 (using 40mm graded stone aggregate) as in sub base to floors, finished fair and even complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) for flooring / path & similar work, finished even & smooth, using extra cement complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-40 grade with grey cement and pigment finished with coloured rubber finish on top, finished over stone dust cushion of 30mm thick complete all as specified and directed.

M&L for cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in coping, water troughs and the likes including weathering slightly, rounded or chamfered angles and throating complete all as specified and directed.

Removing excavated material (soil) not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and likes in cement mortar (1:4) including pointing in white cemnet (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick laid over and including 20mm thick cement screed bed or bedding layer in CM 1:4, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per item No 19 above but as in risers, steps, skirting, dado and pillar including 10mm thick backing coat in CM 1:3 etc complete all as specified and directed.

Demolition of concrete in ground floor & paving not exc 15cm thick, above or below ground level complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non-skid colour ceramic tiles 7 to 8mm thick, area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm in floors etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layers of cement mortar 1:6 for laying of floor finishes complete all as specified and directed.

M&L for coloured glazed tiles in vertical surfaces 300x 450x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick plaster as in screed bed or bedding layers of cement mortar (1:4) on vertical surfaces complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished area of each tiles not exc 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over 15mm cement screed bed in cement mortar 1:6 complete all as specified and directed.

All as per item No 25 above but as in risers, steps, skirting, dado and pillar including 10mm thick backing coat in CM 1:4 etc complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame) area not exc 1.5 sqm complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, & fixing in opening complete all as specified and directed.

S&F factory made solid PVC panelled door shutter 30mm thick (Style) consisting of frame, made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width struck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the style and rail with suitable PVC sheet beading and jointed together with solvent cement etc fixed with frame at site complete all as specified and directed.

S&F anodised aluminium frame for door, windows, ventilator with one or more rebates including jointing cleat for fixing etc complete all as specified and directed.

Supply, Fabrication and fixing of anodised aluminium windows, ventilators, shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packings, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21, 100mm long (2 No) suitable handle (1 No) complete all as specified and directed. Note:- Glazing / gauzing shall be measured and paid separately under respective items.

M&L for 5.5mm thick tinted quality glass and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F framed guard bars with mild steel square bars with ends of bars shouldered and/ or riveted and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F 100mm long mild steel, medium weight, cold rolled butt hinges and fixed with screw/ welded to frames etc complete all as specified and directed.

S&F 125mm extruded aluminium handles, fabricated type, anodised etc complete all as specified and directed.

S&F 125mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 250mm aluminium anodised sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing of bolt and sliding bolts of extruded section or cast alumnium alloy and fixed complete all as specified and directed.

Supply, Fabrication and fixing anodised aluminium doors fixed or openable with vertical styles of size 82 x 44 x 1.59mm (appx) top and bottom rail of size 82 x 44 x 1.59mm (appx) lock / middle rail of size 114 x 44 x 1.59mm (appx) complete including necessary jointing cleats, glazing clips, anodised aluminium beading etc for securing glass, anodised aluminium fittings such as handles, other standard fittings and accessories for locking arrangements etc complete all as specified and directed. Note:- Glazing shall be measured and paid for separately under respective items.

Supply, Fabrication and fixing of anodised aluminium windows, ventilators, shutters, side hung type without sash bars, alumiium sections weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packings, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21, 100mm long (2 No) suitable handle (1 No) complete all as specified and directed. Note:- Glazing / gauzing shall be measured and paid separately under respective items.

M&L for 9mm thick pre-laminated particle board, interior grade, pre-laminated decorative choice lamination and fixed with screws to timber frame work/ aluminimum door panel complete all as specified and directed.

S&F aluminium grill of 6mm thick and 75 x 75mm aperture for windows in approved design/ pattern by Engineer-in-Charge fixed with aluminium beading complete all as specified and directed.

S&F in repair door closer hydraulically regulated, designation No 2, universal type, aluminium (Die cast body) suitable for door shutters complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ ventilators shutters complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillar but excluding ashalar facing etc complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius, built in cement mortor 1:4 complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick wall complete all as specified and directed.

Taking down cement or cement lime plastering including roots of trees and trees of any girth, desription on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on brick or concrete surfaces in CM 1:6, finished even & smooth without using extra cement complete all as specified and directed.

M&L preparation of new plastered surfaces and applying with three coats of white wash over wall surfaces complete all as specified and directed.

M&L preparation of new plastered surface and applying two coat of OBD over a coat of wall care putty complete all as specified and directed.

Dismantling wall and ceiling boards (Fiber, pulp, insulation etc) or insulation boards, slabs, blankets or of any description in any thickness including cover fillets complete all as specified and directed.

M&L 12mm thick non asbestos perforated gypsum board designer type of size 595mm x 595mm, fixed or laid/ inserted to timber/ GI /aluminium frame work as in ceiling flat or sloping complete all as specified and directed. Note:- Snap grid will be measured and paid for separately. Make:- Oceanic brand (ISI marked) of Everest / Visaka.

S&F for GI powder coated framework for seamless ceiling of size 600mm x 600mm comprising of hot deep galvanized steel perimeter angle 0.3mm thick of size 24mm x 24mm fixed to surrouding wall using nylon sleeves and screws at 450mm centre to centre, main runner Tee section 0.4mm thick with height 32mm and cross Tee 0.3mm thick with height 28mm suspended from soffits at approx 1200mm centre to centre with GI cleat and steel expansion fastness including GI wire 4mm dia suspender complete all as specified and directed. Note:- (i) Ceiling board shall be measured & paid separately. (ii) The grid system shall be as per specification of make as specified and directed.

M&L for complete removal of existing treatment including preparation of plastered surfaces of old wall of any description and applying two coats of OBD over a coat of wall care putty on old surface complete all as specified and directed.

S&F GI tubing 15mm bore, medium grade, with all fittings and fixed to wall including taking down complete all as specified and directed.

S&F GI tubing 20mm bore, medium grade, with all fittings and fixed to wall including taking down complete all as specified and directed.

S&F pillar taps 15mm bore dia cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwd shank and fly nut screwd for iron pipes, fancy type complete all as specified and directed. Make:- Prayag Cat No 8214 or equivalent.

S&F in repairs stop valve/ angle cock 15mm dia cast copper alloy, chromium plated, fancy type, high pressure with crutch or butter fly handle, screwed for iron pipe or union and fixed complete all as specified and directed. Make:- Prayag Cat No 8210 or equivalent.

S&F in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and directed.

S&F in repairs vitreous china squatting pan, "Orissa" pattern 580 X 440mm long with integral foot rest, S or P trap including connection to trap and to flushing pipe etc complete including making good to floor complete all as specified and directed.

S&f in repairs trough / oval / round type wash hand basin (flat back or angle back or oval type) of size 550 x 400mm, white, including coupling, waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including S&F waste pipe complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern, low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed. Make:- Prayag Cat No 502 or equivalent.

S&F in repair health faucet of 15mm bore brass chromium plated including PVC pipe to connection GI tubing 15mm bore complete all as specified and directed. Make:- Prayag Cat No BEA-90 or equivalent.

S&F in repairs bib tap 15mm dia, cast copper alloy, chromium plated, fancy type with crutch or butter fly handle, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Prayag Cat No 8606 or equivalent.

S&F in repair soap dish, brass, chromium plated with glossy finish complete all as specified and directed. Make:- Prayag Cat No BA-05 or equivalent.

S&F in repair corner glass shelf 200mm with brackets complete all as specified and directed. Make:- Prayag Cat No BEA-42 or equivalent.

S&F in repair glass shelf 500x125mm with brackets complete all as specified and directed. Make:- Prayag Cat No BEA-45 or equivalent.

S&F in repair PVC connection 15mm size, with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs 32mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.

Dismantling PVC pipes (110/75mm) jointed in cement mortar and taking out of trenches/ from walls including fittings as bends, branch pieces, traps etc complete all as specified and directed.

S&F PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F PVC (SWR) 110mm bore bends, any radius complete all as specified and directed.

S&F PVC (SWR) 110mm bore vent cowl complete all as specified and directed.

S&F in repair towel rail of brass, chromium plated with glossy finish complete all as specified and directed. Make:- Prayag Cat No BA-01 or equivalent.

S&F in repair grating doom 125mm dia with waste hole of PTMT (Min weight 40 gms) complete all as specified and directed. Make:- Prayag Cat No 113 or equivalent.

S&F rotational moulded polyethylene double layered water storage tanks (cylindrical vertical with closed top) of 500ltr capacity, hoisted and fixed in position including PTMT ball valve of 20mm dia and top cover including dismantling of existing water tank as specified in SSR Part I complete all as specified and directed.

Taking down unserviceable point wiring with copper / aluminium conductor cable of (light, fan, plug & power plug point) complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell / buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls / floor etc to macth with existing surfaces including white washing / colour washing /distempering complete all as specified and as directed.

Taking down old unserviceable MCB, sheet metal enclosure, DB, main switch etc and making good distrubed sufaces of wall complete all as specified and as directed.

Taking down carefully unserviceable sub main wiring of any size/ capacity and making good disturbed sufaces to match with the existing surfaces complete all as specified and directed.

M&L point wiring 1100 volt grade single core FR LSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade/ PVC casing caping, on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel terminal boxes/ modular boxes sunk on wall for mounting of any type (modular/ piano type) switches, switch sockets, fan regulator etc including laminated sheet cover 3mm thick or white top modular cover with back plate any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 82 above but one ceiling/exhaust fan point controlled by one switch and regulator.

All as per item No 82 above but one 3 pin 5 amp socket out point on the same board with other switches.

All as per item No 82 above but one 3 pin 5 amps socket out let point on independent board.

All as per item No 82 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point.

M&L for sub main wiring with 1100 volt grade two single core FR LSH PVC insulated unsheathed stranded copper conductor cable 2 x 10 Sqmm with and including 1 x 10 Sqmm earth continuity wire drawing into medium grade PVC conduit not less than 20mm dia, concealed in wall/ceiling complete all as specified and directed.

All as per item No 87 above but of size 2 x 2.5 sqmm with earth wire of 1 x 2.5 sqmm complete all as specified and directed.

S&F modular switch one way 6A, 1 module complete all as specified and as directed. Make:- Legrand Britzy or equivalent in Crabtree / Schneider.

S&F modular switch one way 16A, 1 module complete all as specified and as directed. Make:- Legrand Britzy or equivalent in Crabtree / Schneider.

S&F modular socket 6A 2/3 pin combined 2 module complete all as specified and as directed. Make:- Legrand Britzy or equivalent in Crabtree / Schneider.

S&F modular socket 6A/ 16A, 2/3 pin combined 2 module complete all as specified and as directed.

S&F ceiling rose, surface type, 2/3 terminals, 5 amps complete all as specified and directed.

S&F modular fan step regulator,100 watt, 2 module complete all as specified and as directed.

S&F in repairs,18/ 20 Watt LED tube light fittings complete including tube rod, driver, rated voltage 240V, connecting with 2 core 1 sqmm copper conductor cable complete all as specified and as directed. Make:- CG Cat No LCTL-18-CDL or equivalent in Philips / Wipro.

S&F in repairs LED baton fitting 2' length including drivers having energy consumption, 9-11W, 230 V, 50Hz, 6500K, not less than 800 lumen prewired, complete all as specified and directed. Make:- CG Cat No LCTL-09-CDL or equivalent in Philips, Wipro.

S&F in repairs recessed mounted 2'X2' LED fitting 36/40 W rated voltage 240V,50 Hz, complete all as specified and directed. Make:- CG Cat No LCTRS 36 CDL-36W or equivalent in Philips / Wipro.

S&F sheet metal enclosure MCB-DB, SPN, for 240V, 8 ways with 200 Amp rated copper bus bar, flush /surface mounting, double door type complete all as specified and as directed.

S&F sheet metal enclosure MCB-DB, SPN, for 240V, 4 ways with 200 Amp rated copper bus bar, flush /surface mounting, double door type complete all as specified and as directed.

S&F MCB, SP, 240 volt, 6 to 32 amps, 10 KA breaking capacity 'C' series complete all as specified and as directed.

S&F MCB, SPN, 240 volt, 6 to 32 amps, 10 KA breaking capacity 'C' series complete all as specified and as directed.

S&F hand dryer unit with high speed vaccum motor with option of warm / cold air, antibacterial air filter, 220V, 500W (cold) - 1350W (hot), 25000 rpm, 74db at 1m noise level, Class-I isolation, IPX1 protection level having stainles steel or chrome finish, sensor range from 50 to 150mm complete all as specified and as directed.

S&F exhaust fan single phase, 300mm sweep, metallic with bolts, nuts, washers and connected electrically complete all as specified and as directed.

M&L earthing complete with galvanised steel earth plate electrode of size 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 Type B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and copper lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protec-tion pipe upto 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.10,553.00]

VIJ ASSOCIATES

Sharma Electrical and Services

Bidder Name

Sharma Electrical and Services

VIJ ASSOCIATES

KAMPTEE ENTERPRISES