29/EDC(G)/2024-25

Amount

All these below items/materials from S.N. 1.01 to 1.20 will be given and errected by the contractor on his own cost as per estimate/Resspo Norms.

Holding clamp for TPMO, fuse set, Top, T-off, dropper etc.

V-Type X-arm holding clamp

F-Bracket with Nut and bolt

Nut and bolt off. Size with washer

LT Clamp

LT shackle Insulator

S/S angle bolt 12'' long

Danger Board with clamp

Distribution box with clamp

I hook with clamp

Dead end clamp

Suspension clamp

Stone Pad

Pearcing connector

Earthing complete

XLPE armoured Cable 4x50 sqmm with catenary arrangement

11 kv/LT Fuse Set with complete fittings

MCB 100/180 amp. 4 Core

Barbed wire

E-bracket with clamp

Loading, Unloading and safe cartage of the following materials (S.N. 2.01 to 2.19) from Electricity Store Centre, Gonda to the work site/dump site (Distance up to 60 km)

PVC Cable

PCC Pole

ST Pole

ACSR Weasal Cond.

AB Cable of different size

GI wire 10 swg

11 kv disk insulator with Complete fitting

11 KV pin insulator with Pin

Top Channel

V type X-Arm

Stay set complete with wire

Stay wire

11 KV CJ kit of different size

T-off Channel

Dropper Channel

SS Base

other line material

Erection of single PCC/ST Poles for 11 KV/L.T. line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site (All decentralize material shall be given by the contractor on his own cost.)

Erection of sectional double pole sectional PCC/STP pole alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site. (All decentralize material shall be given by the contractor on his own cost.)

Earthing of pole with complete fitting

Erection and Grouting of stay sets alongwith complete fittings. Cement, Sand & Brick ballast provided by the contractor at his own cost.

Grouting of Poles with 1:4:8 CC ratio of cement, sand & brick ballast, backfilling of pits with mud completely.All required materials provided by the contractor at his own cost.

Construction of 11/0.4 KV S/S for following capacity of T/F with mounting and fitting of T/F on plinth/double pole with proper fitting of all acessories and connecting with all circuit including earthing of T/F fitting with all accessories.

25/63 KVA T/F

Laying, Stringing & Sagging of ABC Cable up to proper sag for the following size cable as per estimate/resspo norms

ABC CABLE of different size

Laying, stringing, sagging & binding of conductors of 11 KV in 3 phase, 3 wire line with jumpering (where as required)

Installation/Errection/Laying/stringing of the following items with complete fitting as per estimate/resspo norms.

PVC Cable

GI wire 10 swg

Stay wire

11 KV/LT fuse Set

MCB 100/180 amp. 4 Core

Barbed wire

E-bracket with clamp

XLPE armoured Cable 4x50 sqmm with catenary arrangement

Danger Board with clamp

Distribution box with clamp

11 KV CJ kit of different size

S/S angle bolt 12'' long

Cutting of tree branches for cleaning route of 11 KV/LT line at the work site (25 mtr.= 1 Job)

Carrage of scrap/conductor from site to store

Guarding of line

Making hole in X-arm

Pipe typer earthing of Transformer as per Estimate/Resspo Norms(all the material shall be provided by contractor on his own cost.)

M/S SHIVALIK INTERNATIONAL (BID ID -4906681)