REPAIR REPLACEMENT TO VARIOUS TYPES OF FENCING APPROACH FOOT PATH HARD STANDING KERBSTONE DIVIDERS WITH ALLIED WORKS IN TECH AND DOMESTIC AREA AT AFS THANJAVUR

Amount

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embeded portion and making good disturbed ground all as specified and as directed.

M&L PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in foundations all as specified and as directed.

M&L precast RCC 1:1½:3 type A-1 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm but n exc 250 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops all as specified and as directed.

S & F Mild steel round 10mm dia and over, cut to length, bent to shape required, as in fencing stiffners binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Bars Fe 290 (Gde-E-165) all as specified and as directed.

S & F Mild steel TMT 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

All as per Srl item No 5 above but 5 to 10 mm dia as in stirrups all as specified and as directed.

S & F Mild steel screw (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm long but n exc 15 cm long of 12 mm dia.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

M&L preparation of new steel surfaces of any description, n. exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and as directed.

Mild steel work as in posts and struts in fencing including cutting to shape as directed and embedding in concrete, screwing, securing bolts, drilling holes notching for wire, flat iron fillets, angle (for securing wire mesh etc.) and similar work conforming to Fe-290 Gde E-165 all as specified and as directed.

M&L preparation of new steel surfaces of any descri-ption, exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and as directed.

Dismantling fencing wiremesh, any type all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standereds, rails, straining bolts etc. including provision of binding wire complete all as specified and as directed. NOTE : Chain link fencing shall be issued under schedule ''B''

S&F in repair concertina a coil of dia 600 mm having 53 turns when streched to covers a length of 6mtr all as specified and as directed.

Dismantling of reinforcement steel or mild steel work of any description not otherwise provided for grating gates steel work all as specified and directed.

Demolition of cement Concrete (unreinforced) n. exc. 15 cm thickness below or above ground level all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified.

M&L 20mm thick screed bed in CM 1:6 all as specified and as directed.

M&L coloured Chequered cement concrete tiles 30cm x 30cm x 22mm thick, set, jointed and pointed in neat cement slurry in floors all as specified with grey cement and pigment all as specified and as directed.

M&L 50mm thick sand filling under floors incl watering and consolidation complete all as specified and as directed

M&L 60 mm thick (M-35grade) machine pressed precast concrete inter locking paver block (with grey cement and pigment) any shape and size conforming to IS 15658-2006 complete

M&L precast RCC 1:1½:3 type A1 (using 20mm aggregate) set in CM 1:6 as in, coverslabs (for man holes etc.) chullah hoods, chajjas,water troughs, mangers, shelves and similar articles with plain faces all as specified and directed.

M&L 100mm thick PCC 1:2:4 type B-1(using 20mm graded aggregate) as in flooring all as specified and as directed.

Forming 20 mm thick expansion joints filled with pre-formed bituminious filler and top 30mm primed and sealed with sealing compound grade 'A' (thickness of concrete slab is 100 mm)

M&L RCC 1:1½:3 type A-1 (using 20mm aggregate) in lintels upto 1.5m clear span, cills, steps, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.

M&L preparation of old steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M&L Preparation of old concrete surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed

M&L Preparation of new concrete surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint all over a coat of primer all as specified and as directed

KR ENTERPRISES

M/S. SRI RAMANUJA CONSTRUCTIONS