Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹20.3 LAccepted-AOC 58 SHAHEED NAGAR OPP BHIMRAO AMBEDEKAR UNIVERSITY RBL ROAD LUCKNOW 226025 UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226025 | 1 | Accepted-AOC L1 | |
| 2 | 2₹21.5 L+₹1.0 L (4.90%)Rejected-Finance | 2 | Rejected-Finance No L1 | |
| 3 | 3₹21.5 L+₹1.0 L (4.99%)Rejected-Finance | 3 | Rejected-Finance No L1 | |
| 4 | 4₹21.8 L+₹1.3 L (6.52%)Rejected-Finance GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | 4 | Rejected-Finance No L1 | |
| 5 | 5₹22.6 L+₹2.1 L (10.5%)Rejected-Finance C O BIPIN KUMAR VILL SATNAPUR POST BAHADURGANJ DISTT GHAZIPUR UP 275201 | BAHADURGANJ | GHAZIPUR | UTTAR PRADESH | 275201 | 5 | Rejected-Finance No L1 |
Tender Value
₹29 L
EMD Value
₹58,000
Closing Date
15 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Lucknow
HQ CWE Lucknow, 229 MG Road, Lucknow Cantt, Lucknow-226002
ADDN/ ALTN TO BLDG NO 1 RAK UNDER GE WEST LUCKNOW
2023_MES_581506_1
CWE/LKO/W/T-98 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
Lucknow
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE West Lucknow
₹58,000
Yes
21 Mar 2023
17 Feb 2023
17 Mar 2023
17 Feb 2023
15 Mar 2023
3 Mar 2023
17 Feb 2023 - 3 Mar 2023
Amount
Surface excavation n.exc 30 cm deep and and avg 15 cm deep and getting out soft and loose soil as specified and directed.
Excavation in trenches, n. exc. 1.5 m wide and n. exc 1.5 m in depth ,for foundation, laying of pipes, cables etc. or for shafts , wells, cesspits, manholes, pier holes, etc. n.exc. 10 Sqm on plan and n. exc. 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed.
M&L for plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregates) as in sub base of floors including finishing the surfaces even and rough to receive the topping layer as specified and directed.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.
M&L for fly ash brick straight or curved on plan exc 6 mtr mean redious built in CM 1:6 as specified and directed.
M&L for fly ash brick straight or curved on plan to any radius, in half brick walls built in Cement mortar 1:4 as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil as specified and directed.
Removing excavated surplus material (Soils) n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point as specified and directed.
M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as directed.
M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded aggregate) in Columns, pillars, piers, etc as specified and directed.
M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded aggregate) in roofs slab, landings, balconies, canopies, deck slabs and in shelves and the like as specified and directed.
M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span as specified and directed.
M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; (Horizontal or sloping) Rough finished surfaces of concrete flat as specified and directed.
M & L for formwork to sides and soffits of floor or roof beam,beam hauchings, girders, bressum-mers, lintels cantilever, shelves including supports, overhangs, etc also splays between floors and beams etc. as specified and directed.
Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia as specified and directed.
Ditto all as per item No 16 but 6 to 8 mm dia as specified and directed.
Taking down cement plaster from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M & L for rendering 15mm thick in cement and sand mortar 1:6 (Internally) on brick or concrete surfaces including finished even and smooth without using extra cement complete all as specified.
M & L for rendering 15mm thick in cement and sand mortar 1:4 (Externally) mixed with water proofing compound @ 3% by weight of cement on brick or concrete surfaces including finished surfaces even and smooth without using extra cement complete all as specified and directed.
Supply only Liquid water proofing compound as specified and directed.
M & L for rendering 5mm thick in cement and sand mortar (1:3) on concrete surfaces (ceiling) finished even and smooth without using extra cement, complete all as specified & directed.
Material & labour for preparation of newly plastered surfaces of wall & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over one coat of wall care putty all as specified and directed.
M & L for prepration of newly plastered surfaces of wall and applying one coat of alkali resistance primer and two coats of oil bound distemper over a layer of 1 mm thick wall care putty complete all as specified and directed.
M & L for preparation of new plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified.
Complete removal of existing treatment on walls any number of layers by scrapping with steel scrapper or by other means and one coat of wall care putty upto smooth wall finishing than over Acrylic Smooth exterior paint in two coats of required shade applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding, removing and rubbish off the premised etc complete all as specified and directed.
M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors laid over and including 15mm thick 1:6 cement mortar screed bed etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match as specified and directed.
M & L for glazed ceramic colour tiles of size ( 350 x450mm ) x 7mm thick in walls etc, set & joints in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over and including 10mm thick rendering in cm 1:4 complete all as specified and directed.
M & L for light shade coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.
M&L for hard core of gauge not exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface of broken stone as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed.
Taking down chowkhat frame with shutter (without taking out shutter from the frame)exc 1.50 Sqm and n.exc.4.00 sqm and removing from site as directed.
M & L for 1st class hard wood for double shutter for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
S & F 35 mm thick shutters 1st class HW (Sheesam) rail and style plain framed, panelled shutter (two or more panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
S & F 30mm thick flush shutter, solid core construction with block board core and ply wood panels of commercial type on both side complete all as directed.
Supply and fixed 35mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (devided into panels with plane sash bars any numbers) edges of framing plan, chamfered or rounded, fitted without sash bar all as specified.
M & L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S & F Powder coating Anodized aluminium frame for doors, windows, ventilators with one or more rebates using 1.50mm thick aluminium section including joining cleat for fixing etc. complete all as specified
S & F powder coating anodized aluminium glazed window and ventilator shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles complete all as specified
Supply & fix stainless steel wire cloth 0.36mm minimal dia of wire and average width of aperture 1.4mm fixed with stanless steel staples to windows.
S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S & F factory made soild PVC moulded panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed.
Supply & fix MS Butt hinges "medium weight" cold rolled mild steel 100mm size as directed.
Supply & fix 150mm long alumunium anodised barrel tower bolts of extructed section as directed.
Supply& fix 150mm MS ordinary helical tail pattern spring including roller & roller plate complete as directed.
S & F of 150 mm Brass handles, cast type, polished bright all as specified and directed.
S & F of fancy type double bracket pattern curtain roads Satainless steel of approved shade including bracket/junctions /wall to wall and with rings of best quality as per requirement and direction of Engineer in-charg.
S & F aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified.
M & L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete as directed.
M & L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete as directed.
M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.
M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.
Supply & Fixing gun metal gate valve screwed both ends to 20mm bore pipe complete all as specified.
S & F Vitreous China wash down water closet pan, pedestal pattern, white, cascade type with built in flushing cistern and plastic water closet seat cover, white, complete all as specified and directed.
S & F of vitreous china under counter type Wash basin, white, oval shape of size 555x425 mm x195mm including CP waste coupling and 32 mm dia waste pipe etc complete all as specified and directed.
S & F of single lever wall mixture 3-in-1 system with provision for overhead shower with 115 mm long bend pipe, connecting legs and wall flange(without over head sower) screwed down for 15 mm bore GI pipe complete all as specified and directed.
S & F of fancy type brass chromium plated towel ring with round flange complete all as specified and directed.
S & F of toilet paper holder, superior quality, fancy type, brass chromium plated with flap complete all as specified and directed.
S & F of overhead shower rose with arms 450 mm long, 200mm x 200 mm size, square shape, single flow, ABS body chrome plated with grey face plate with rubit cleaning system, suitable for 15mm bore pipe and fixed complete all as specified and directed.
S & F of hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long flexible pipe with wall hook bracket etc. and all fittings for bath complete all as specified and directed.
S & F hand shower dia 105 mm round shape single flow with Air effect(ABS body & face plate chrome plated) with rubit superior quality cleaning system with Easy flex tube in chrome Finish 1.5 m longe with nuts including Wall outlet with shower Hook Square shape etc complete all as specified and directed.
S & F glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete, all as specified and directed.
Supply & fix sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as specified and directed.
Supply and fixing of 15mm bore CP central hole basin mixer for WHB mixer complete all as specified and directed.
Supply and fixed of PVC rotational moulded over head storage tank 1000 Lts capacity including 20mm dia PTMT float valve complete all as specified.
S & F PVC connection pipe 15mm size & 600mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete.
S & F of PVC (Rain water) pipes in any length fixed to wall 110 mm bore complete all as directed.
S & Fin repair PVC pipes in any lenth fixed to wall 75 mm bore complete all as directed.
S&F PVC bends 110 mm bore complete all as directed.
S&F PVC bends 75 mm bore complete all as directed.
Supply and fixed of 75 mm dia PVC nahani trap with CP grating including jointing to waste pipe fixed in cement concrete.
M & L for providing and injecting chemical emulsion along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc. in apron.
M & L for treating of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement morter 1:2 (1 cement :2 coarse sand) to match the existing floor all as specified and directed.
M & L for cement concrete type B1 1:2:4 (20 mm graded aggregate) plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, provided , water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as specified and direcred.
S & F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed.
S & F MS framed work as in truss, purlin or rafter of angle iron including distance pieces cleats etc of Fe 410-w(Gde-E-250) Qualities complete all as specified and directed.
M & L for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM 1:4 including Cutting, polishing, rubbring and moulding of edges including demolition of stone slab complete all as specified and directed.
M & L for cleaning of all loose dirt and dust from roof surfaces and provision of water proofing treatment to Mumty roof slab and vertical surfaces with APP based modified polymeric membrane centre core 100 micron HMHDPE outer film 20 micron each having thickness 3mm, weight not less than 3Kg/Sqm as per manufacturers instruction with torch application complete all as specified and directed by Engineer-in-Charge with following course of description below: (a) M&L for screed bed 10mm thick in CM 1:3 on concrete surfaces/ roof/ parapet wall using WPC as per manufacturer instruction finished fair & even without using extra cement complete all as specified and directed (b) First coat apply bituminous primer confirming to IS-3384of 1965 @ 0.4Kg/Sqm to be applied on prepared roof surface till the surface is properly impregnated (c) Second course of laying of APP based modified polymeric with 100mm overlap in longitudinal direction 150mm in tranverse direction sealed and bounded to the surface by torch application method. All joints and changes in all direction should be covered with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane Note ::- (i) The water proofing compound measured & paid separately relevant Item.
M & L applying plastic emulsion texture paint on internal wall surface over 1 mm thick wall care putty on 2 mm thick plaster of Paris including preparaing surface by using sand paper, punning etc for smooth surface. Note : Texture pattern/ Shade will be approved by Engineer-in-charge.
Supply & Fixing of sink without drainage board size 560x410x200 mm made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe all as specified and directed.
S & F of stainless steel kitchen plate rack made out of 1.00 mm thick stainless steel of size 900x750x250 mm including screws and weight not less than 5.00 Kg complete all as specified and directed.
S&F in repair of kitchen PVC cabinet and cupboard in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18mm thick pvc sheet & provision of shutters made out of 18 mm thick one side decorative laminated PVC sheet all required brackets 5.5screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings as per site requirementand as per make and specification mentioned as per drawing and all are specified and directed by Engineer-in-charge on site.
M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc all as specified and directed
M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc.all as specified and directed
Supply & Fixing in repair gun metal gate valve screwed both ends to 20mm bore pipe complete all as specified.
S & F in repair vitreous china under counter type wash basin, any colours oval shape of size 555x425x195 mm including CP waste coupling and 32 mm dia waste pipe etc complete all as specified and directed.
S&F in repair single lever wall mixture 3-in-1 system with provision for overhead shower with 115 mm long bend pipe, connecting legs and wall flange(without over head sower) screwed down for 15 mm bore GI pipe complete all as specified and directed.
S&F in repair of fancy type brass chromium plated towel ring with round flange complete all as specified and directed.
S&F in repair of toilet paper holder, superior quality, fancy type, brass chromium plated with flap complete all as specified and directed.
S & F in repair hand shower dia 105 mm round shape single flow with Air effect with rubit superior quality cleaning system with Easy flex tube in chrome Finish 1.5 m longe with nuts including Wall outlet with shower Hook Square shape etc complete all as specified and directed.
S & F in repair overhead shower rose with arms 450 mm long, 200mm x 200 mm size, square shape, single flow, ABS body chrome plated with grey face plate with rubit cleaning system, suitable for 15mm bore pipe and fixed complete all as specified and directed.
S & F in repair hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long flexible pipe with wall hook bracket etc. and all fittings for bath complete all as specified and directed.
Supply and fixing in repair for 15mm bore CP central hole basin mixer for WHB mixer complete all as specified and directed.
S & F in repair long body 15mm bore bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
S & F in repair glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets complete all as specified and directed.
Supply & fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as specified and directed.
Supply and fixed in repair PVC rotational moulded over head storage tank 1000 Lts capacity including 20mm dia PTMT float valve complete all as specified.
S & F in repair of PVC connection pipe 15mm size & 600mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified.
S & F in repair PVC (Rain water) pipes in any length fixed to wall 110 mm bore complete all as directed.
S & F in repair PVC (Rain water) pipes in any lenth fixed to wall 75 mm bore complete all as directed.
S & F in repair PVC bends 110 mm bore complete all as directed.
S & F in repair PVC bends 75 mm bore complete all as directed.
S & F in repair 75 mm dia PVC nahani trap with CP grating including jointing to waste pipe fixed in cement concrete.
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief including necessary require fitting complete all as specified and directed. Note : Glass shall be measured seprately and paid seprately.
S & F Anodised aluminium grill for partition (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer?in-charge. Note : Grill shall be measured seprately and paid seprately.
Supply only 5 mm thick Figured glass, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each pane including necessary require fitting complete all as specified and directed.
Supply only 2 to 8 mm thick PVC sheet / ACP sheet for cabinate area not exceeding 1.2 sqm complete all as specified and directed
S & F in repair fancy type double bracket pattern curtain roads Satainless steel of approved shade including bracket/junctions /wall to wall and with rings of best quality as per requirement and direction of Engineer in-charge.
M & L for 75mm thick cement concrete 1:3:6 typeC-2 using 40mm graded stone aggregate as in sub bases of floors and pavings etc. finished even and fair without using extra cement complete all as specified and directed.
S&F Chequered cement concrete tiles 30cm x 30cm x 25 mm thick set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed bedding layer in CM 1:6 complete all as specified and directed.
M&L for cement concrete type B1 1:2:4 (20 mm graded aggregate) plinth courses, string courses,lacing courses, copings, kneelers, apex stones, bed plates, provided , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
M & L for 50 mm thick of Cement concrete type C2 1:3:6 (40 mm graded aggregate) in foundations, filling and mass concrete all as specified and directed.
M & L for 30mm thick Sand filling under floors or in foundations including watering and consolidation all as specified and directed.
M & L for providing and laying in repair of Machine pressed precast concrete rouber moulded interlocking paver block any shape, any colour and size of 60mm thickness, M-35 Grade PU coated complete all as specified and directed.
Labour only (except tiles) for refixing of Machine pressed precast concrete rouber moulded interlocking paver block any shape and size of 60mm thickness, M-35 Grade PU coated as specified & directed.
M & L for RCC 150 mm diameter pipes laid on 150mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/ Precast RCC with SFRC ventilating cover and frame includes all items and activities to execute and make sewer line functional for depth 0.7m- 1.65m with 150mm thick Cradle PCC 1:4:8 complete all as specified and directed.
M & L of 50 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) at floors area all as specified and directed.
M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.
All as per item 122 above but one socket outlet point 5 Amp on an independent board
All as per item 123 above but on the same board
All as per item 122 aboveCall bell / buzzer point controlled by one bell push
All as item no 122 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board.
S & F switch piano flush button single pole one way 5 Amp 240 volt complete as directed.
S & F switch piano flush button single pole one way 15 Amp 240 volt complete as directed.
S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed.
S&F socket outlet flush type 5 pin 5 Amps 240 volts complete as directed.
S&F ceiling rose surface bakelite three terminal complete as directed.
S&F bell push single pole one way 5 Amp, 240 volt fuesh type as directed.
S&F call bell AC single pole 240 volt Musical Type
Supply & fix fan regulator electronic step type for ceiling fan fixed, and connecting as directed,
S&F in replacement of sheet metal enclosure (MCB DB) single phase and neutral with 200 Amps rated bus bar 12 way double door type , 240 volts as directed.
S & F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.
M&L for Sub main wiring with two single core PVC insulated cable with 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete
Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt, 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.
S&F sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.
S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
S&F MCB, single pole & neutral 32/40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
S&F MCB, triple pole & neutral 63 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.
Supply and fixing modular type AC box with socket plug top and MCBs with two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified. Make: Anchor/Havells/C & S.
Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.
S & F in repair super bright LED (2X2), 36 W, 6000 K surface mounting with high efficent LED source all as per specified and directed.
S & F in repair Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 7/9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed.
S & F LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts.
Supply and fixing of heavy duty metal body exhaust fan single phase 230/240 volt of size 300 mm sweep including holes of suitable size ,grouting of nuts and bolt etc and making good to match the existing surface including louvers and making connetion with twisted copper flexible wire 23/0.076mm, including disconnecting and taking down old unserviceable exhaust fan and deposited in AGE E/M (W) store yard for BER action complete all as specified and directed.
Supply, installation testing and commissioning of storage type water heater 25 ltrs capacity vertical mounting type complete made out of CRCA outer body, copper storage tank, heating element, thermostat, thermal cut out, glass wool etc. complete including making necessary electrical connections with suitable size copper multistranded cable all as directed by EIC.
M & L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade, watering pipe 20 mm dia GI light grade, GI wire mesh, GI funnel, alternate layer of char coal and salt, PCC chamber, recessed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 complete all as specified and directed .
Gaurav Enterprises
Spectrum Enterprises
QUALITY CONSTRUCTIONS CO
M/s Bipin Construction
M/s Sudhir Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .