Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.7 CrAccepted-AOC NO 9 DR SEVALIYE SHIVAJI GANESAN NAGAR 3RD STREET DINDIGUL 624 001 | DINDIGUL | DINDIGUL | TAMIL NADU | 624001 | ₹7.7 Cr Quoted ₹7.8 Cr | L1 | Accepted-AOC aoc |
| 2 | L2₹7.9 CrRejected-Finance | ₹7.9 Cr | L2 | Rejected-Finance Being L2 |
| 3 | L3₹8.0 CrRejected-Finance | ₹8.0 Cr | L3 | Rejected-Finance Being L3 |
| 4 | L4₹8.1 CrRejected-Finance NO 15 B 2ND FLOOR 4TH CROSS T ASHWATHNARAYANA ROAD THIMMAIAH NAGARA YELAHANKA BANGALORE 560 064 | BANGALORE | BANGALORE | KARNATAKA | 560064 | ₹8.1 Cr | L4 | Rejected-Finance Being L4 |
| 5 | L5₹8.2 CrRejected-Finance | ₹8.2 Cr | L5 | Rejected-Finance Being L5 |
| Sl No | Description | Qty | Unit | FRIZO INDIA PVT LTD L9 | P Natesan and Co L1 | AFSON ENGINEERS & CONTRACTORS L3 | B.N.S Constructions L7 | R. Wadhumal and Sons L6 | LUMOS INFRA PVT LTD L2 | Phoenix Infra L4 | PRAGMATIC INFRASTRUCTURE LIMITED L8 | SMLP ASPHALTS L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. | 500 | Cubic Metre | 1,025 ₹5.1 L | 800 ₹4 L | 600 ₹3 L | 816 ₹4.1 L | 930 ₹4.7 L | 900 ₹4.5 L | 800 ₹4 L | 955 ₹4.8 L | 816 ₹4.1 L |
| 2.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. | 2,800 | Square Metre | 115 ₹3.2 L | 90 ₹2.5 L | 70 ₹2.0 L | 100 ₹2.8 L | 102 ₹2.9 L | 90 ₹2.5 L | 99 ₹2.8 L | 110 ₹3.1 L | 105 ₹2.9 L |
| 3.00 | Demolition of reinforced cement concrete of any descriptions and in any position not otherwise specifically provided for complete all as specified and directed. | 25 | Cubic Metre | 1,850 ₹46,250 | 1,200 ₹30,000 | 900 ₹22,500 | 1,836 ₹45,900 | 1,750 ₹43,750 | 1,750 ₹43,750 | 1,800 ₹45,000 | 1,800 ₹45,000 | 1,836 ₹45,900 |
| 4.00 | Demoltion of Brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles as directed by the Engr-in-Charge. | 3.5 | Cubic Metre | 665 ₹2,327.50 | 700 ₹2,450 | 600 ₹2,100 | 612 ₹2,142 | 630 ₹2,205 | 685 ₹2,397.50 | 600 ₹2,100 | 648 ₹2,268 | 612 ₹2,142 |
| 5.00 | Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. | 384 | Each | 425 ₹1.6 L | 350 ₹1.3 L | 330 ₹1.3 L | 346 ₹1.3 L | 400 ₹1.5 L | 365 ₹1.4 L | 340 ₹1.3 L | 412 ₹1.6 L | 346 ₹1.3 L |
| 6.00 | Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed. | 498 | Each | 560 ₹2.8 L | 500 ₹2.5 L | 450 ₹2.2 L | 510 ₹2.5 L | 530 ₹2.6 L | 510 ₹2.5 L | 500 ₹2.5 L | 545 ₹2.7 L | 510 ₹2.5 L |
| 7.00 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as directed. | 1,700 | Running Metre | 39 ₹66,300 | 30 ₹51,000 | 25 ₹42,500 | 36 ₹61,200 | 37 ₹62,900 | 32 ₹54,400 | 35 ₹59,500 | 38 ₹64,600 | 36 ₹61,200 |
| 8.00 | Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal to store complete all as directed. | 1,000 | Running Metre | 42 ₹42,000 | 35 ₹35,000 | 28 ₹28,000 | 36.5 ₹36,500 | 42 ₹42,000 | 40 ₹40,000 | 35 ₹35,000 | 43 ₹43,000 | 38 ₹38,000 |
| 9.00 | Taking up or down 25 or 32 mm bore, steel tubing and connections, including cleaning for refixing or removal to store complete all as directed. | 700 | Running Metre | 44 ₹30,800 | 40 ₹28,000 | 45 ₹31,500 | 42.5 ₹29,750 | 45 ₹31,500 | 41 ₹28,700 | 43 ₹30,100 | 46 ₹32,200 | 50 ₹35,000 |
| 10.00 | Dismantling of cast iron or reinforced concrete or PVC drain pipes upto 110mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. | 900 | Running Metre | 75 ₹67,500 | 65 ₹58,500 | 70 ₹63,000 | 72 ₹64,800 | 72 ₹64,800 | 69 ₹62,100 | 70 ₹63,000 | 74 ₹66,600 | 72 ₹64,800 |
Tender Value
₹7.7 Cr
EMD Value
₹7.1 L
Closing Date
23 Mar 2026, 6:00 pmClosed
CWE Wellington
Headquarters Commander Works Engineers Wellington, Barracks Post The Nilgiris PIN 643 231
ADDITION/ALTERATION TO 30 X OFFICER MARRIED ACCN IN GORKHA HILL AT DSSC WELLINGTON
2026_MES_753705_1
85035/E8
Open Tender
Civil Works
365 days
WELLINGTON
Please refer Tender documents.
7 documents required · 7 mandatory
₹3,000
GE DSSC WELLINGTON
₹7.1 L
Yes
30 Mar 2026
21 Feb 2026
25 Mar 2026
21 Feb 2026
23 Mar 2026
16 Mar 2026
21 Feb 2026 - 28 Feb 2026
Select, Excess (+), Less (-) Less (-)
Tender Inviting Authority: CWE WELLINGTON
NAME OF WORK: ADDN/ALTERATION TO 30 X OFFR MARRIED ACCN IN GORKHA HILL AT DSSC WELINGTON
Contract No: CWE/ WEL/ OF 2025-26
Sl. No. Item of Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency Rate in Figures to be entered by the Bidder including all Taxes etc. Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category
Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. Cubic Metre Excess(+) Full Conversion INR
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
Demolition of reinforced cement concrete of any descriptions and in any position not otherwise specifically provided for complete all as specified and directed. Cubic Metre Excess(+) Full Conversion INR
Demoltion of Brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles as directed by the Engr-in-Charge. Cubic Metre Excess(+) Full Conversion INR
Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. Each Excess(+) Full Conversion INR
Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed. Each Excess(+) Full Conversion INR
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as directed. Running Metre Excess(+) Full Conversion INR
Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal to store complete all as directed. Running Metre Excess(+) Full Conversion INR
Taking up or down 25 or 32 mm bore, steel tubing and connections, including cleaning for refixing or removal to store complete all as directed. Running Metre Excess(+) Full Conversion INR
Dismantling of cast iron or reinforced concrete or PVC drain pipes upto 110mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
M & L for non-skid, ceramic, coloured tiles 7 to 9 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, and set & jointed in neat cement slurry including 15 mm thick screed bed in cement mortor 1:4 complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for glazed, coloured, ceramic, tiles of size (600 x 300mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, and set & jointed in neat cement slurry including 10 mm thick bedding in cement mortor 1:3 complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for Vitrified, designed, light shade coloured (light shade), tiles, 7 to 9 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, etc and set & jointed in neat cement slurry including 15 mm thick screed bed in cement mortor 1:4 complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for 10mm thick, heavy duty vitrified unpolished porcelain floor tiles of size 300x300mm, laid in floor of patternas approved, set and jointed with Epoxy Ezy grout to match complete all as specified and directed. (Make: Somany" Neo Decan Natural" or Johnson "Endura" or equivelant of make as per list of manufacturer's) Square Metre Excess(+) Full Conversion INR
M & L for cleaning the RCC roof surface to remove all dust, dirt, oil, existing broken/damaged coving, laitance, prostrusions (by light grinding) and other contaminants shall be removed manually to obtain a fairly smooth surface. Any undulations, pot holes and cracks shall be opened and treated with polymer modified mortar made by mixing Nitobond SBR of FOSROC or equivalent makes as per list of manufacturer's @ 10% by weight of cement : sand mix of ratio 1:3 including making of coving at all wall-floor junctions using polymer modified mortar complete all as per manufacturer’s instructions. After repair and preparing the surface and proper curing, the surface shall be allowed to dry thoroughly and apply a coat of primer using a competible primer or diluted coat of the water proofing materials as recommended by the manufacturer's to seal the subtrate and ensure proper adhesion of the waterproofing system over the primed surface provide and applying single component, liquid water proofing membrane using Nitoproof 600 PF of make FOSROC or equivalent of make as per list of manufacturer's by authorised applicator of the manufacturer. Liquid water proofing membrane (Nitoproof 600 PF) shall be liquid applied, pitch free polurethane coating capable of bridging substrate cracks upto 2mm and shall be applied in two coats at a coverage rate of 2 kg/Sqm to acheive a minimum DFT of 1.3mm each coat. The second coat shall be applied in a perpendicular direction to the first coat. Membrane shall be terminated at 300mm above FFL and secured by providing a groove cut of 10mm x 10mm and sealed with Renderoc HSxtra of Fosroc or equivalent as per list of manufactuer's Over the finished waterproofing treatment and prior to laying of protection screed, a layer of 180GSM non woven geotextile membrane shall be provided. Square Metre Excess(+) Full Conversion INR
The liquid waterproofing membrane shall have the following minimum properties: (i) Elongation: >400% as per ASTM D 412, (ii) Tensile strength: 2.5 N/Sqmm as per ASTM D 412, (iii) Adhesion in peel test: >50 N as per ASTM C - 836, (iv) Recovery from 350% elongation: 95% as per ASTM D 412, (v) Water vapour transmission (2.3mm film): 0.60 g/Sqm/Hr, (v) Initial hardness Shore A: Minimum 60 as per ASTM D 2240, (vii) Root resistant: Protection by screed is required and (viii) Crack bidning: Not less than 2mm. The roof treatment shall be carried out through an authorised applicator of the manufacturers duly approved by GE complete all as per the manufacturer's instructions and all as specified and directed. (Note: Quoted rate shall deem to include all materials as specifed above except protection screed bed, which shall be measured and paid seperately under respective item of BOQ)
M & L for 20 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for providing water proofing treatment to sunken floor portion of WC, bathroom etc by applying first layer of slurry of cement @ 0.488 Kg/Sqm mixed with Dr Fixit or equivelant acrylic based polymer modified cementitious (PMC) composite compound @ 0.253 Kg/Sqm and second layer of slurry of cemenjt @ 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compouind @ 0.126 Kg/Sqm complete all as specified and directed. (Make: Dr. Fixit and equivelant of make as per List of manufacturer's) Square Metre Excess(+) Full Conversion INR
M & L for 20mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound "FOSROC's Complast 421 IC" @ 130 ml/per bag of cement including a bonding coat of "FOSROC's Nito Bond AR' cement slurry for roof slab/floor complete all as specified and as directed. (Make: M/S FOSROC or equivelant make as per List of manufacturer's) (Note: Liquid water proofing compound shall be measured and paid seperately as supply) Square Metre Excess(+) Full Conversion INR
Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed. Litre Excess(+) Full Conversion INR
M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed. Cubic Metre Excess(+) Full Conversion INR
M & L for 40 mm thick (average), plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in flooring, etc mixed with liquid water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note: LIquid water proofing compound shallbe measured and paid seperately as supply only) Square Metre Excess(+) Full Conversion INR
M & L for 100 mm thick, plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub-base of flooring, etc finished even and rough to receive top layer of floor complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for 20mm thick Granite work, Jet black slab in single piece or two piece (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like laid over and including 20mm thick screed bed in cement mortar 1:3 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & cutting, polishing complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for Machine cut cudappah stone slab, 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20 mm thick screed bed in cement mortor 1:3 and rubbing, polishing complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for 20-25 mm thick Machine cut kota stone slab in single peice for full length of step as in treads of staircese and as in flooring laid over and including 20 mm thick screed bed in cement mortar (1:6). and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing to mirror finish and rounding to edges etc complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for 20-25 mm thick Machine cut kota stone slab in single peice for full length of step as in skirting/riser laid over and including 10 mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing to mirror finish and rounding to edges etc complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for Pre-cast cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate), block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed. Cubic Metre Excess(+) Full Conversion INR
M & L for Providing Pre-cast cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls in width and setting in mortar 1:6 complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for use & waste Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizonal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for Reinforced Cement Concrete M-25 Design Mix (Using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, and in shelves and the like etc complete all as specified and directed. (Note: Reinforcement will be measured and paid seperately) Cubic Metre Excess(+) Full Conversion INR
M & L for use & waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etcetc complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L Reinforced Cement Concrete M-25 (Design Mix) (using 20 mm graded stone aggregate) as in beams, cantilevers, lintels over 1.5m span complete all as specified and directed. (Note : Reinforcement will be measured & paid seperately) Cubic Metre Excess(+) Full Conversion INR
S & F high strength TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. Kilogram Excess(+) Full Conversion INR
S & F high strength Mild steel TMT bars 5mm dia and over upto and including 10mm dia in strirrups, spacers and binders spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed. Kilogram Excess(+) Full Conversion INR
M & L for 75 mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
Providing and fixing factory made uPVC white colour door with shutter with following construction profile: (i) Door frame over all sectional size 63mmx60mm with wall thickness 2.7 (+/-) 0.2mm of extruded section (ii) Shutter frame over all sectional size 82.90mm x 45mm with wall thickness 2.7 (+/-) 0.2mm of extruded section with sash bead of appropriate size (iii) The corners shall be plastic welded (iv) THe hinge side vertical outer frame shall be reinforced with galvanised steel profile of wall thickness 1.2mm (+/-) 0.2mm (v) THe door shall be fixed to walls using 8mm dia, 80mm long MS scrrews minimum 03 Nos on each side (vi) The door panel shall be of Solid UPVC board of 20mm thick (vii) The shutter shall be fixed to frame with using 03 Nos of 3D hinge of suitable size, one mortice lock with powder coated handle of suitable size alongwith atleast two numbers of keys and two numbers powder coated MS tower bolts of suitable size complete all as specified and as directed Square Metre Excess(+) Full Conversion INR
M & L for Factory made Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
M & L for Factory made Pressed steel frames 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
S & F Factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
S & F Factory made Steel ventilator with top hung shutter including hinges, steel peg stay, complete complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for Providing cement concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) for filling hollow portion, pressed steel frames, etc complete all as specified and directed. Cubic Metre Excess(+) Full Conversion INR
S & F 35 mm thick, Factory made second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a). Square Metre Excess(+) Full Conversion INR
S & F 35 mm thick, factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed. Cubic Metre Excess(+) Full Conversion INR
Providing and fixing factory made coloured uPVC windows, 3 track with glazing and gauging all as per manufacturer's instructions and with following specifications: (i) The profile for UPVC window frame shall be made of PVC metrials conforming to IS-10151. The window frame shall made of extruded UPVC section having overall dimension of 112x60mm having wall thickness 2.5 (+/-) 0.2mm (ii) The corner of wall frame shall be joined by MS galvanised brackets. Joints shall be mitred and plastic welded. (iii) The hinge side vertical outer frame shall be reinforced with galvanised steel tube of wall thickness 1.mm (+/-) 0.1mm and side rod shall be provided at the bottom of the frame (iv) The profile should be two or three chamber system which shall provide high insulation properties. (v) Glazing shall be provided with 5mm thick plain/frosted glass fixed with appropriate size of beading as per the manufacturer's specifications (vi) Stainless steel wire mesh 0.36mnm nominal dia and average width of aperture 1.4mm shall be provided with each window shutter (Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimensions in higher side shall be acceptable but no extra payment on this account shall be made) Square Metre Excess(+) Full Conversion INR
S & F factory made UPVC white colour two track two panels sliding window upto 1.5m height made of (big series) frame 67x50mm & sash 46x62mm both having wall thickness of 2.3mm +/- 0.2mm and single glazing bead/double glazing bead of appropriate dimension comprising of UPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.6mm (+/- 0.2mm) thick galvanised mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kg), GI fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over bracket rod of required size and of approved quality complete all as specified and directed by the Engr-in-Charge. Glazing shall be provided with 4.8mm thick plain/frosted glass fixed with appropriate size of beading as per the manufacturer's specifications. (Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimensions in higher side shall be acceptable but no extra payment on this account shall be made) Square Metre Excess(+) Full Conversion INR
S & F factory made UPVC white colourthree track three panels slidingdoor upto 1.5m height made of (big series) frame 116x45mm & sash 46x82mm both having wall thickness of 2.3mm +/- 0.2mm and single glazing bead/double glazing bead of appropriate dimension (Area of door above 5.00 Sqm) comprising of UPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.6mm (+/- 0.2mm) thick galvanised mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks and UPVC extruded inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmision gear with keeps, zinc alloy (whitre powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 Kg), GI fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over bracket rod of required size and of approved quality complete all as specified and directed by the Engr-in-Charge. Glazing shall be provided with 10mm thick toughened glass fixed with appropriate size of beading as per the manufacturer's specifications. Stainless steel wire mesh 0.36mm nominal dia and average width of aperture 1.4mm shall be provided with door shutter complete all as specifed and directed. (Note: (i) The unit rate quoated shall deemed to be included taking down the existing door window chowkats and shutter and closing cavity at jambs, cills and heads of opening etc with PCC 1:3:6, type C-1 (using 20mm graded aggregate). (ii) For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimensions in higher side shall be acceptable but no extra payment on this account shall be made) Square Metre Excess(+) Full Conversion INR
S & F factory made UPVC ventilator with profile for construction of UPVC ventilator frame of overall size 60x58mm with wall thickness 2.7mm (+/-) 0.2mm extruded sections, the corners shall be plastic welded, the hinge side vertical outer frame shall be reinforced with galvanised channel of wall thickness 1.2mm. The ventlator shall be fixed to walls using 8mm dia 80mm long MS screws minimum 2 Nos on each side. The 5 Nos of pin headed glass panels of 5mm thick shall be placed in slots provided in ventilator complete all as specifed and directed. (Note: (i) The entire fixing shall be done as per the manufactuer's instructions and specifications and as directed by the Engr-inCharge). (ii) The unit rate quoted shall be included the cost of glas/wire netting and all other cennected acessories. (iii) Net opening will be measured for payment purpose) Square Metre Excess(+) Full Conversion INR
S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, With Wood free EPS supplying & fixing in frame at site as per specification & drawing as per specification and drawing and as directed. Square Metre Excess(+) Full Conversion INR
S & F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F 200 mm long, Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F 300mm long, Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F in repair Floor door stopper of aluminium alloy body and tongue, anodised, 150 mm overall length of cover plate with hard drawn steel spring, fixed in floor complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
S & F 125 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed. Square Metre Excess(+) Full Conversion INR
S & F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including hacking out of old broken glass complete all as specified and as directed. Square Metre Excess(+) Full Conversion INR
S & F 4 mm thick, figured glass, pin headed type, in square n.exc 0.5 Sqm in each pane glazing with oil putty complete all as specified and as directed. Square Metre Excess(+) Full Conversion INR
S & F 4 mm thick, figured glass, pin headed type, in square n.exc 0.5 Sqm in each pane glazing with oil putty including hacking out of old broken glass complete all as specified and as directed. Square Metre Excess(+) Full Conversion INR
M & L for Mild steel framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed. Kilogram Excess(+) Full Conversion INR
M & L for Welded steel wire fabric, n.exc 4Kg/Sqm supplied and fixed complete to wood or steel members complete all as specified and directed Kilogram Excess(+) Full Conversion INR
S & F in repairs 18mm thick High density High Moisture Resistant (HDHMR) Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc including dismantling of existing board of any type complete all as specified and directed. (Note: All exposed edges/surfaces to be finished with same laminated sheet to match with other surfaces and mothing will be paid extra on this account) Square Metre Excess(+) Full Conversion INR
S & F stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 16mm thick shutters complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F Magnetic closer of suitable size for kitchen/bedroom cupboards fixed with screws complete all as specified and directed. (Make: EBCO/GODREJ/KAFF/HETICH) Each Excess(+) Full Conversion INR
S & F stainless steel (SS 304 Grade) kitchen basket of size 544mmx505mmx200mm, plain wire basket etc to kitchen drawer modular type with necessary fixing arrangement complete all as specified and directed. (Note: Work shall be carried out as per the manufacturer's instructions.) (Make: EBCO, Cat No. RA-BCCS1-21-20-8 or equivelant of make Godrej/KAFF/HETICH) Each Excess(+) Full Conversion INR
S & F stainless steel (SS 304 Grade) kitchen basket of size 544mmx505mmx100mm, plain wire basket etc to kitchen drawer modular type with necessary fixing arrangement complete all as specified and directed. (Note: Work shall be carried out as per the manufacturer's instructions.) (Make: EBCO, Cat No. RA-BCCS1-21-20-4-CT or equivelant of make Godrej/KAFF/HETICH) Each Excess(+) Full Conversion INR
S & F stainless steel (SS 304 Grade) kitchen basket of size 530mmx505mmx200mm, plain wire basket etc to kitchen drawer modular type with necessary fixing arrangement complete all as specified and directed. (Note: Work shall be carried out as per the manufacturer's instructions.) (Make: EBCO, Cat No. RA-21-20-8 or equivelant of make Godrej/KAFF/HETICH) Each Excess(+) Full Conversion INR
S & F stainless steel (SS 304 Grade) kitchen basket of size 530mmx505mmx150mm, plain wire basket etc to kitchen drawer modular type with necessary fixing arrangement complete all as specified and directed. (Note: Work shall be carried out as per the manufacturer's instructions.) (Make: EBCO, Cat No. RA-21-20-6 PL or equivelant of make Godrej/KAFF/HETICH) Each Excess(+) Full Conversion INR
S & F Stainless steel telescoping ball bearing channel, zinc plated finish for drawer including necessarty fittings upto length of 600mm fixed with screws complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F 1000 litres capacity, three layered, rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable one as specified in SSR Part I and directed. Each Excess(+) Full Conversion INR
S & F 500 litres capacity, three layered, rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable one as specified in SSR Part I and directed. Each Excess(+) Full Conversion INR
Dismantling after Disconnecting existing water storrage tank of capapcity exc 250 & n.exc 500 Ltrs setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt etc from tanks and from mouth of circular pipes etc. complete all as specified and directed. Each Excess(+) Full Conversion INR
Dismantling after Disconnecting existing water storrage tank of capapcity exc 500 & n.exc 1000 Ltrs setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt etc from tanks and from mouth of circular pipes etc. complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F in repairs, 25 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 455 gms) complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F in repair 25 mm bore, gun metal, globe or Gate valves with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F in repairs, 20 mm bore, gun metal Gate valves, with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed. Each Excess(+) Full Conversion INR
Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
Supply, laying, connection and testing, 25mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10 cm girth complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
S & F in repair Vitreous China wash basin, of size 400 x 300 x 110 mm, white, flat back, including cutting for and pinning in ends of brackets or erecting stand and including CP waste couplingof 32mm dia and PVC waste pipe of 32mm dia complete all as specified and directed. (Make: Parryware Cat No. C 8992 or equivelant of make as per List of manufacturer's) Each Excess(+) Full Conversion INR
S & F in repairs, Brass CP mixer for mixing hot & cold water screwed down for iron pipe, 15mm bore and fixed complete all as specified and directed Each Excess(+) Full Conversion INR
S & F in repairs 15mm bore, bib cock (two in one) without health fuscet multi type including flexible hose complete all as specified and directed. (Make: Parryware Cat No. T1381A1 or equivelant of make as per list of manufacturer) Each Excess(+) Full Conversion INR
S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specifiedcomplete all as specified and directed. Each Excess(+) Full Conversion INR
S & F in repair 125 mm size, Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F in repairs Soap dish holder, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed. (Make: Parryware Cat No. T6907A1 or equivelant of make as per list of manufacturer) Each Excess(+) Full Conversion INR
S & F in repairs, Toilet paper holder with flat recessed type stainless steel fixed to wall with brass screw complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F in repairs, Towel Rack 600mm long with Lower Hangers, Stainless Steel including Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. (Make: Parryware Cat No. T6908A1 or equivelant of make as per list of manufacturer) Each Excess(+) Full Conversion INR
S & F in repairs, Corner rack with glass with brass brackets, chromium plated ralings including Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. (Make: Parryware Cat No. T6910A1 or equivelant of make as per list of manufacturer) Each Excess(+) Full Conversion INR
S & F in repair 15 mm bore, angular stop valve with wall flange, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Parryware Cat No. T1372A1/G5807A1 or equivelant of make as per list of manufacturer) Each Excess(+) Full Conversion INR
S & F in repair 15 mm bore, two way angular stop valve with wall flange, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Parryware Cat No. T1343A1 or equivelant of make as per list of manufacturer) Each Excess(+) Full Conversion INR
S & F in repairs, acrylic PVC bathroom mirror cabinet of size 622x422 mm with openable shutter fixed with looking mirror of selected quality glass and with suitable shelves in side the cabinet of superior quality as approved. (Make: Prayag Cat No. 555 or equivelant of make as per manufacturer's list) Each Excess(+) Full Conversion INR
S & F in repair 75 mm bore, PVC (SWR) floor trap, with stainless steel anti cockroach grating arrangement including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F in repair 75 mm bore, PVC (SWR) multi floor trap with grating including jointing with solvent cement fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F in repairs, Stainless steel, kitchen plate rack of size 24x36x10 inch as per existing design and specification as approved complete all as specified and directed. (Make: Nirali/Parryware/Prayag/Blue Star) Each Excess(+) Full Conversion INR
S & F in repair 50 mm dia, Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc including all fitting as required complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F in repair Vitreous China, wash basin, White, (Corner type) of size 450 x 300 mm or nearest higher size with and including CI brackets, 32mm CP waste coupling, 32mm dia waste pipe and including cutting for and pinning in ends of brackets or erecting stand, making necessary connection to pillar tap, connection pipe, waste pipe/bottle trap etc complete all as specified and directed. (Note: Unit quoted rate shall demmed to be inclusive of wash basin, CI brackets, waste coupling and waste pipe but exclusive of pillar tap, connection pipe etc) Each Excess(+) Full Conversion INR
S & F in repair Vitreous China, wash basin, White, flat back type of size 630 x 450 mm or nearest higher size with and including CI brackets, 32mm CP waste coupling, 32mm dia waste pipe and including cutting for and pinning in ends of brackets or erecting stand, making necessary connection to pillar tap, connection pipe, waste pipe/bottle trap etc complete all as specified and directed. (Note: Unit quoted rate shall demmed to be inclusive of wash basin, CI brackets, waste coupling and waste pipe but exclusive of pillar tap, connection pipe etc) Each Excess(+) Full Conversion INR
S & F in repairs, 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F in repairs, 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F in repairs, 15 mm bore, Stop valves, cast copper alloy, chromium plated with long shank and cup, concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F in repairs, 15mm bore, PVC connection pipe 750mm long with PTMT nuts at both ends complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F 110 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
S & F 75 mm bore, PVC (SWR), Soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls, etc complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
S & F 110 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, etc complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
S & F 75 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, etc complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
S & F 110 mm bore, PVC (SWR) bends of any radius with oval access door complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F 75 mm bore, PVC (SWR) bends of any radius with oval access door complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F 110 mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F 75 mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F 75mm bore, PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F 110 mm bore, PVC (SWR) vent cowl complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F 75 mm bore, PVC (SWR) vent cowl complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F in repairs, stainless steel kitchen double bowl sinks without drainage board made of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 940mm x 470mm x 204mm complete all as specified and directed. (Make: Parryware, Cat No. C857081 or equivalent of make as per list of manufacturer's) Each Excess(+) Full Conversion INR
S & F stainless steel kitchen sinks with drainage board made of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed. Each Excess(+) Full Conversion INR
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed Square Metre Excess(+) Full Conversion INR
M & L for rendering 15 mm thick on stone masonry or other than fair faces of brick work wall surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for rendering 15 mm thick on stone masonry or other than fair faces of brick work surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and smooth without using extra cement complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and fair without using extra cement complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for rendering 5mm thick in cement mortar 1:4, mixed with integral water proofing compound with weight of cement as per manufacturer's instructions and finished the surface even and fair without using extra cement over 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). Square Metre Excess(+) Full Conversion INR
M & L for rendering 5mm thick in cement mortar 1:4, mixed with integral water proofing compound with weight of cement as per manufacturer's instructions and finished the surface even and fair without using extra cement over 10 mm thick rendering on stone masonry or other than fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). Square Metre Excess(+) Full Conversion INR
M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for Preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for Preparation of old treated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth after removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats and making smooth surfaces with sand paper and cleaning and applying oil staining and applying two coats (under coat & finishing coat) of synthetic varnish over a coat of wood filler liquid transperant complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall and prepared and applying 3mm thick of wall care putty to a smooth surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed. (Note: Work shall be carried through an authorised applicator of the manufacturer's) Square Metre Excess(+) Full Conversion INR
M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primerand over 3mm thick of wall care putty to a smooth surface complete all as specified and directed. (Note: Work shall be carried through an authorised applicator of the manufacturer's) Square Metre Excess(+) Full Conversion INR
M & L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for preparation of old decorated surfaces of walls after complete removal of existing treatment and applying three coats of white wash complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
Material and labour for complete removal of existing treatment from old decorated plastered surfaces of ceiling and prepared and applying 3mm thick of wall care putty to a smooth surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed. (Note: Work shall be carried through an authorised applicator of the manufacturer's) Square Metre Excess(+) Full Conversion INR
M & L for preparing new surfaces of internal Ceiling, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer and over 3m thick of wall care putty to a smooth surface complete all as specified and directed. (Note: Work shall be carried through an authorised applicator of the manufacturer's) Square Metre Excess(+) Full Conversion INR
M & L for preparation of old decorated surfaces of ceiling after complete removal of existing treatment and applying three coats of white wash complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for preparation new external surfaces of wall etc and applying 3mm thick white wall care putty making the surfces to an even and smooth finish by rubbing with sand paper of different grade etc and applying Two or more coats of water based 100% Premium acrylic smooth exterior emulsion paint with silicon aditive and colour stay technology, excellent Dirt Pick up resistance with low VOC less than 50 gm/litre as per the LEEDS specifications and UV resistance as per IS 15489:2004, Alkali & fungal resistance of required shade (Company Depot Tinted) @ 1.43 Ltr (undiluted)/10 Sqm per two coat diluted with water as per manufacturer instructions over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Note: Work shall be carried through an authorised applicator of the manufacturer's) Square Metre Excess(+) Full Conversion INR
M & L for preparation new external surfaces of wall etc after complete removal of existing treatment by wire brushing, crack filling and bio-wash to fight microbial growth and applying 3mm thick white wall care putty making the surfces to an even and smooth finish by rubbing with sand paper of different grade etc and applying Two or more coats of water based 100% Premium acrylic smooth exterior emulsion paint with silicon aditive and colour stay technology, excellent Dirt Pick up resistance with low VOC less than 50 gm/litre as per the LEEDS specifications and UV resistance as per IS 15489:2004, Alkali & fungal resistance of required shade (Company Depot Tinted) @ 1.43 Ltr (undiluted)/10 Sqm per two coat diluted with water as per manufacturer instructions over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Note: Work shall be carried through an authorised applicator of the manufacturer's) Square Metre Excess(+) Full Conversion INR
M & L for aluminium designer powder coated decorative curtain rod (Drapery rod), 20mm dia, exterior grade having 3mm wall thicknes with and including side caps, holding clamps and 'F' and 'L' brackets fixed to walol with PVC rawl plug and brass screws etc complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
S & F Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc. complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
Removinjg and re-fixing of existing garage door, adjustment the height of door (if required), erected in position as indicated complete, push pull or manual type and rewelding joints, stoppers etc, oiling, greasing, easing etc including necessary replacement of profile, grid channel (if required) for full functional of door complete all as specified and directed by the Engr-in-Charge. Each Job Excess(+) Full Conversion INR
M & L for Mild Steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and directed. Kg Excess(+) Full Conversion INR
M & L for 40 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in roof padding finished the surfaces even and fair without using extra cement complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for 10mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound "FOSROC's Complast 421 IC" @ 130 ml/per bag of cement including a bonding coat of "FOSROC's Nito Bond AR' cement slurry for roof slab/floor complete all as specified and as directed. (Make: M/S FOSROC or equivelant make as per List of manufacturer's) (Note: Liquid water proofing compound shall be measured and paid seperately as supply) Square Metre Excess(+) Full Conversion INR
M & L for Application of one coat of water based bitumen emulision primer @ 0.3 lit per sqm including cleaning of surface thoroughly from dust & dirt and laying APP based polymeric membrane minimum weight 3.8 Kg/Sqm and a minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150gms/Sqm) shall be laid over tack coat on roof and on verticle surface upto and insert in grooves and packed in CM (1:3) with overlaps in memberen 100mm, The over laps shall be sealed by flames or as per manufacturer's instuctions and A coat of hot blown bitumen @ 1.2 Kg/Sqm shall be applied over water proofing membrane complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed. Cubic Metre Excess(+) Full Conversion INR
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in hard/dense soil complete all as specified and directed. Cubic Metre Excess(+) Full Conversion INR
Removing excavated soil exc 1.5 Km but n. exc 5 Km and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. Cubic Metre Excess(+) Full Conversion INR
S & F 150 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, etc complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggragate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore drain pipes complete all as specified and directed . Running Metre Excess(+) Full Conversion INR
M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for plain cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed. Cubic Metre Excess(+) Full Conversion INR
M & L for Precast Reinforced Cement Concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in cover slab (For manhole etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:6 including necessary form, moulds, etc complete all as specified and directed by the Engr-in-Charge. (Note : Reinforcement shall be measured and paid separately) Cubic Metre Excess(+) Full Conversion INR
M & L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 150 mm bore of pipe complete all as specifieed and directed. Each Pipe Excess(+) Full Conversion INR
Extra for forming fair finished to concrete surface of drain 30cm inner girth in cement including forms, mould, mitred/stopped etc complete all as specified and as directed. Running Metre Excess(+) Full Conversion INR
Demolition of un-reinforced cement concrete in ground floors and pavings n.exc 15cm thickness, (Below or above Ground level) complete all as directed by the Engr-in-Charge Cubic Metre Excess(+) Full Conversion INR
Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed. Cubic Metre Excess(+) Full Conversion INR
M & L for hardcore of gauge n.exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. Cubic Metre Excess(+) Full Conversion INR
M & L for Sand filling under floors or in foundations including spreading, levelling, watering and consolidation complete all as specified and directed. Cubic Metre Excess(+) Full Conversion INR
M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
M & L for Chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, as in floors etc, including 20 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
Dismantling fencing wire mesh, any type complete complete all as specified and directed. Square Metre Excess(+) Full Conversion INR
Excavating in post holes (or similar holes) each n. exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface in hard/dense soil complete all as specified and directed. Each Excess(+) Full Conversion INR
Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed Kg Excess(+) Full Conversion INR
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. (Note: Rails, fillets etc shall be measured and paid seperately) Square Metre Excess(+) Full Conversion INR
M & L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in tie bar for fixing chain link fencing conforming to grade Fe-410-W (Gde.E-250), quality-A or Fe 290 (Gde - E-165) complete all as specified and directed. Kilogram Excess(+) Full Conversion INR
S & F Mild steel screw bolts of 11 to 15 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm and n exc 10cm long complete all as specified and directed. Kg Excess(+) Full Conversion INR
M & L for preparation of new or previously untreated steel surfaces of any description, n.exc 10 cm width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed. 10 Running Metre Excess(+) Full Conversion INR
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed. Point Excess(+) Full Conversion INR
Taking down unserviceable sub-main wiring (any numbers of cable) with rigid PVC/steel conduits/PVC casing-caping including cutting chases for conduits and making good disturbed surfaces complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
M & L for Sub main wiring with 2 runs of Single core 2.5 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLS (ISI marked) copper cable drawn through and including concealed PVC conduit of suitable size (Medium grade) with all conduit accesories and fittings along with 1 run of single core 2.5 sqmm PVC insulated multi stranded FRLS (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed. (Note :- (i) Two runs of 2.5 sqmm and one runs of 2.5 sqmm cable as earth wire and one run of conduit shall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one ) Running Metre Excess(+) Full Conversion INR
Disconnecting and taking down carefully existing exhaust fan of 250 to 300mm from it's existing position including louver and deposited MES store yard complete all as directed by the Engr-in-Charge. Each Excess(+) Full Conversion INR
Fixing only Exhaust Fan any sweep and any type (PVC 250mm/Metal 300mm) with all fixing accessories including cleaning and painting with one coat of white synthetic enamel paint (1st Grade quality) and connecting up including provision of cable from ceiling rose/connection to fan complete all as specified and directed. Each Excess(+) Full Conversion INR
Disconnecting and taking down carefully electric geyser of capacity upto 50 Litres by unscrewing nuts and bolts from clamps, disconnecting electrical connections and PVC cold/hot water connection pipes and keeping serviceable geysers in safe custody for re-fixing complete all as specified and directed by the Engr-in-Charge. (Note: The cost of transportation and depositing the unserviceable geysers to MES store yard is deemed to be included in the unit quoted rate.) Each Excess(+) Full Conversion INR
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers, complete with all accessories and electric connection including making necessary holes in walls and making good disturbed surfaces as per the existing one complete all as specified and directed Each Excess(+) Full Conversion INR
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete with all accessories and electric connection including making necessary holes in walls and making good disturbed surfaces as per the existing one complete all as specified and directed Each Excess(+) Full Conversion INR
Taking down existing electric meter of any capacity from its existing position and after disconnecting all connections, cleaning and depositing the same to BSO store yard in good condition and stickering the name of the correspoding quarter No complete all as specified and directed. Each Job Excess(+) Full Conversion INR
Fixing only serviceable LED light fittings of any type, 20 Amps, properly cleaned including connecting up with and including twin core flexible copper conductor cable opf suitable size complete all as specified and directed (Note: Old serviceable light fittings as obtained from taking down of point wiring above shall be re-used). Each Excess(+) Full Conversion INR
Fixing only serviceable LED light fittings of any type, 10 Amps, properly cleaned including connecting up with and including twin core flexible copper conductor cable opf suitable size complete all as specified and directed (Note: Old serviceable light fittings as obtained from taking down of point wiring above shall be re-used). Each Excess(+) Full Conversion INR
M & L for Point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore (Minimum) medium grade (ISI marked) concealed type including metal GI boxes of suitable module flush to wall including modular white cover plate of suitable module for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLS [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch complete all as specified and directed.. (Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface. (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one) Point Excess(+) Full Conversion INR
All as per item No. 186 above but for One light point controlled by two Nos two way switch complete all as specified and as directed. Point Excess(+) Full Conversion INR
All as per item No. 186 above but for One 3/5 pin socket outlet 6 amps on independent board complete ditto Point Excess(+) Full Conversion INR
All as per item No. 186 above but for One 3/5 pin socket outlet 6 amps point on same board complete ditto Point Excess(+) Full Conversion INR
All as per item No. 186 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 2.5 sqmm multistranded FRLS (ISI marked) and 2.5 sqmm PVC insulated unsheathed solid copper conductor cable FRLS (ISI marked) as earth lead complete ditto Point Excess(+) Full Conversion INR
All as per item No. 186 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 4 sqmm multistranded FRLS (ISI marked) and 4 sqmm PVC insulated unsheathed solid copper conductor cable FRLS (ISI marked) as earth lead complete ditto Point Excess(+) Full Conversion INR
S & F switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed. Each Excess(+) Full Conversion INR
S & F switch modular single pole Two way 6 amp 240 volts,1 module complete all as specified and as directed. Each Excess(+) Full Conversion INR
S & F Modular socket outlet 6A/16A, 2/3 pin combined, 2 module complete all as specified and as directed. Each Excess(+) Full Conversion INR
S & F Modular socket outlet 6A, 2/3 pin combined, 2 module complete all as specified and as directed. Each Excess(+) Full Conversion INR
S & F switch modular single pole one way 16 amp 240 volts,1 Module complete all as specified and as directed. Each Excess(+) Full Conversion INR
S & F modular bell push 6 am, 1 module,complete all as specified and as directed. Each Excess(+) Full Conversion INR
S & F Bell electric, Ding Dong AC 230 Volts, single pole complete all as specified and as directed. Each Excess(+) Full Conversion INR
S & F ceiling rose, 65 X 50mm two to three terminals, PVC/polycarbonate, insolated body complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete and connecting up complete all as specified and as directed. Each Excess(+) Full Conversion INR
S & F LED lights fitting 1x 20W, 220V, AC (4ft) decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completewith all accessories complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size completecomplete all as specified and directed. Each Excess(+) Full Conversion INR
S & F Decorative bedside brushed nicket finished fixture luminaire of single arm with opal glass diffuser with one LED lamp 5W, B22 with all accessories internally pre-wired and including connecting up completecomplete all as specified and directed. (Note: The cost of making good and matching to the existing surface is deemed to be included in the unit quoted rate) (Make: Havell's Gobleto WL 1LS E27 Gold IP20 or equivelant of make as per list of manfucturer's) Each Excess(+) Full Conversion INR
S & F Decorative wall mounting brushed nicket finished fixture luminaire of doublee arm with opal glass diffuser with two LED lamp 9W, B22 with all accessories internally pre-wired and including connecting up completecomplete all as specified and directed. (Note: The cost of making good and matching to the existing surface is deemed to be included in the unit quoted rate) (Make: Havell's Gobleto WL 2Ls E27 Gold IP20 or equivelant of make as per list of manfucturer's) Each Excess(+) Full Conversion INR
S & F decorative bulk head edge lit LED luminaire, 10 Watt with minimum 120 Lumen/Watt output, IP >=65, IK>=07 class I, environment friendly, energy saving, surface mounted, made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories. internally pre-wired and including lamp, and connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. (Make : Havell's Cat No. WL 2LS B22 SS LED and equivelant model of make as specified in list of manufacturer). Each Excess(+) Full Conversion INR
S & F Telephone Socket RJ-45, suitable for CAT 6 cable, sheilded, folded metal, modular, 1 Module complete all as specified and as directed. Each Excess(+) Full Conversion INR
S & F TV coaxial Socket modular 1 module complete all as specified and as directed. Each Excess(+) Full Conversion INR
M & L for Sub main wiring with 4 runs of Single core 4 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLS (ISI marked) copper cable drawn through and including concealed PVC conduit of suitable size (minimum 20mm dia) (medium grade) with all conduit accesories and fittings along with 1 run of single core 4 sqmm PVC insulated multi stranded FRLS (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed. (Note :- (i) Four runs of 4 sqmm and one runs of 4 sqmm cable as earth wire and one run of conduit shall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one ) Running Metre Excess(+) Full Conversion INR
S & F Rigid non-metalic PVC conduit (20mmdia) exclusive of boxes (junction/ treminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc. complete all as specified and directed. Running Metre Excess(+) Full Conversion INR
Taking down unserviceable main switches, DBs, bus bars chambers, VTPN etc any capacity including all fittings and fixtures such as MCBs, isolator, etc and removing from site complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F Distribution board (vertical load line DB), double door made out of CRCA mild steel sheet, surface with insulated materials like polyester or with epoxy powder coating and IP43 & IK 09 protection, VTPN, 08 wat, 415 Volts with copper bus bar of rating 160 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and TP MCB as outgoing and making all necessary connection complete all as specified and as directed. Each Excess(+) Full Conversion INR
S & F Distribution Board, Triple pole and neutral. 06 Way, 415V, Double door with IP 43 protection, IK 09 fitted with 200 Amps rated busbar and blanking plates, neutral link including all necessary fittings, and making all necessary connection and making good complete all as specified and as diretced complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F Distribution Board, SPN 4 Way, 240V, metal Double door with IP 43 protection, fitted with 200 Amps rated bus bar and blanking plates, neutral link including all necessary fittings, and making all necessary connection and making good complete all as specified and as diretced complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F MCCB, 4 Pole, 63 Amps rating (IcS=100% of Icu), 415 Volt, 16 KA breaking capacity with adjustable overload & adjustable short circuit setting thermal magnetic release complete all as specified and as directed . Each Excess(+) Full Conversion INR
S & F Miniature Circuit Breaker, SP, 6 to 32 Amps, 240 Volts, 10KA capacity, C Series complete all as specified and as directed Each Excess(+) Full Conversion INR
S & F minature circuit breaker, SPN, 6-32A Amps, 240 Volts, 10KA breaking capacity, C Series complete all as specified and as directed Each Excess(+) Full Conversion INR
S & F Miniature Circuit Breaker, TP, 32 Amps, 415 Volts, 10KA breaking capacity, B Series complete all as specified and as directed Each Excess(+) Full Conversion INR
S & F RCBOs for earth leakage, overload & short circuit protection, 32 Amps, 4 pole, 100mA, for electrical networks with high harmonics/pulsated currents and transients with earth fault indicator & positive contact indication complete all as specified and as directed Each Excess(+) Full Conversion INR
Supply, install, testing & Commissioning, electric water heater, 25 ltrs capacity, Storage type, steel body, electrically operated on single phase 230 Volts AC, BEE 5 Star Rating with Double Safety Thermostat, Multi-function Safety Valve, High Density Insulation, Cathodic Protection, Superior Quality copper Inner Tank, and Single/Dual Glass-coated Incoloy Heating Elements, 8 bars highest pressure rating with minimum five years warranty on inner tank, magnesium anode energy saving ISI marked complete including grouting of nuts and bolts on wall for propper hanging of geyser with all accessories and connection of inlet & outlet pipe line including connecting up with 3 single core PVC insulated, multistranded copper conductor cables complete all as specified and directed. Each Excess(+) Full Conversion INR
S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps complete all as specified and as directed. Each Excess(+) Full Conversion INR
S & F smart three phase, four wire, dual source pre-paid energy meter conforiming to BIS-15884 marked fixed in existing meter board/floor penals with pre payment capacity, touch keypad based digital having current range 10-60 Amps, 415 Volts, accuracy class 1.0 alongwith parallel home display split unit with inbuilt load control switch containing provision for TOD and RTC, inbuilt feature to sense the DG mode through PLSI, dual soruce registration with respect to grid as well as DG supply and dynamic load allocation facility from grid and DG, capable of define for tariff slabs, happy hour and hpoliday definition complete all as specified and directed. Each Excess(+) Full Conversion INR
M & L for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (light grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion inclduing taking down old one complete all as specified and as directed by the Engineer-in-Charge. Each Set Excess(+) Full Conversion INR
S & F Autoclean, filterless, electric chimney of 90cm hood, T-shaped, digital display, slant body and 200W power with high quality heat resistant tempered glass of 1500 cubic metre per hour turbo suction power, made of stainless steel materials and alongwith aminimium duct pipe of suitable size for exhaust purpose including provn of exhaust duct holes of suitable size in existing wall and making good disturbed surfaces as per the existing specifications complete all as specified and as directed by the Engineer-in-Charge. (Note: The items for necessary electrical connection shall be meaured and paid seperately) Each Excess(+) Full Conversion INR
Total in Figures
Quoted Rate in Figures Select
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.52 MB
tender85035_mrgd.pdf
Tender Documents • 1.97 MB
BOQ_844193.xls
BOQ • 0.47 MB
Download all tender documents and submit your bid