SPL REPAIR/REPLACEMENT OF LIGHTING ARRESTER, FLAME PROOF LIGHT, FLAME PROOF DB AND CONNECTED ITEMS AT OLD MARG SASF AND OTHER SANCTIONED WORKS UNDER GE ALWAR

Amount

Taking down old Unserviceable air termination rod of any size and capacity complete all as specified and as directed by Engineer-in-Charge.

M&L single pointed air termination aluminium rod 12 mm dia and 300 mm long complete all as specified and as directed by Engineer-in-Charge.

Taking down old Unserviceable aluminium/GI strip from roof and wall of SASF any size and position including making good to disrurbed surface of wall and roof complete all as specified and as directed by Engineer-in-Charge.

Refixing of serviceable aluminum/GI strip complete as obtain from above item 3 with on saddle / insulators, including straightning and fixing screws/accessories for roof and down conductor complete all as specified and directed by Engr-in-Charge. Note: 1.Fixing of serviceable insulators will be deemed to be included with quotade rate. 2.New insulators will be measured and paid separetly

S&F aluminium srip of size 32 X 6 mm complete with saddle and fixing with screw/accessories for roof and down conductor complete all as specified and as directed by Engineer-in-Charge.

S&F copper Strip 32x6mm fixed on wall or buried in ground or any other indicated situation complete all as specified and as directed by Engineer-in-Charge.

Taking down old Unserviceable GI rusted pipe from roof or wall any size and position including making good to disrurbed surface of wall and roof complete all as specified and as directed by Engineer-in-Charge.

S&F GI pipe light grade 50 mm dia for protection of GI strip complete all as specified and as directed by Engineer-in-Charge.( for strip protection)

M&L for Test point with Junction box of polycarbonate body with minimum rating IP 65 of size not less than 130mmx170mmx80mm complete including made of aluminium bronze size 75x75x32mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw fixed with earth strips including nut bolt with washer on both side inside the junction box and junction box shall be fixed on wall/ pole with suitable clamp including accessories complete all as specified and directed. Make of Junction box - Naptune Cat No 1005 / equivalent in Hansel/ Spelsberg including dismantling of old unservieable MS test point box complete.

M&L for framed brackets of angles or tee with web and flanges cut to shape, drilled and counter sunk for screw including bending and welding angles as necessary gusset plates riveting etc not exc 10 kg in weingh each brackets, clamps for holding pipe and aluminium strip for lightning protection including taking out old materials complete all as specified and as directed by Engineer-in-Charge.

Material and labour for renewal of copper Earthing complete with copper earth plate electrode of size 60cmx60cmx5mm thick buried directly in ground (earth pit should not less than 4 mtr deep below normal ground level ) with top edge of the plate not less than 2.95 mtr deep below normal ground connected to and included copper earth strip 32mmx 6mm by means of copper bolts nuts check nuts and washer returning and filling the pits with excaviated vsoil mixing with charcoal 250 kg, crystal salt 200 kg, magnisiun sulphate of 100 kg and vegitable soil all around the plate up to 350 mm above from top edge of plate and balence portion filling with excaviated soil in layers not exc 25 mm thick 25 mm bore galvanised iron medium grade watering pipe up to top of plate 50mm bore galvanised iron light grade pipe for earth strip protection including all excavation earth work in any type of soil pcc 1;3;6 type c1 ....for chamber of internal size 300mmx 300mmx300mm with 120mm thick wall and 700mmx700mmx150mm thick bed concreat RCC 1:2:4 ,type b1 for precast chamber cover 50mm thick reinforced with welded steel wire fabric orxPM jali (weight not less than 4.00 kg/sqmm) ,funnel,with wire mesh complete all as specied and directed. Note (i) Quoted rate shall be deemed to include for earth strip with protection pipe up to 7.5 M length INCLTaking down old Unserviceable rusted earthing materials any size and position including making good to disrurbed surface of wall including testing complete all as specified and directed.

M & L for cutting of bitumanous road or PCC upto 30cm deep and 20cm wide for laying of pipe lines for protection of GI strip and making good surface by PCC 1:2:4 type B-1,20mm grade complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) of any description and any position n.exc 15 cm thickness (below or above GL) complete all as specified and as directed by Engineer-in-Charge.

M&L of PCC 1:2:4 type B-1, 20 mm graded aggregate filling and mass concrete, for road finishing, PCC blocks, earthing pit cover, and foundation concrete complete all as specified and directed by Engr-in-Charge.

Checking/testing of Earth resistance value of earthing pits Installed inside SASF area as requirement basis as directed by Engr in Charge or as schedule and making the damaged earthing serviceable by pouring salted water into earthing or making continuity by AL/copper strips and bringing down the resistance value within specified limits, all as specified and directed by Engr-in-Charge. Note: (i) The entire station will be divided intotwo zones as per earthing location and the contrcator will deploy seperate team for each zone to test the resistance value of earthings in each zone to complete the process within one month. The entire process will be repeated after every three months (quarter yearly) upto completion of the contract. (ii) one earthing testing in one season is measured one job. (iii) Digital Earth tester will be arrange by the contractor his own. (iv) Date of testing and due date of testing is to be written on a register with sign of user rep & Engr-in Charge submitted to GE. (iv) Testing and correction action is to be done within one month from date of commencement .The contractor has to deploy electrician with helper and testing equipment and all the resources to complete the task within one month.

Excavation in trenches in soft/loose soil not exceeding 1.50 Mtrs wide and not exc. 1.5 Mtr deep and getting out for taking out/laying cable, poles &stay etc complete.

Returning, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid and tested complete.

Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete.

M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm. Note : Punned thickness shall be measured

Supply and laying of sub class 'B' bricks in trenches over cables for protection cover across the length of cable complete all as specified and directed.

M&L for driling hole in hard standing / road for laying of pipe for protection of cable etc by adopting method of horizontal manual drilling (trenchless technology) without disturbing the top surface or cutting and making good the disturbed surface to the existing surface.

Supply & laying LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sqmm 4 core sizes in trenches /passing through pipes/ on poles incl Taking down old cables etc complele all as specified and directed.

Supply & Fix & connecting totally enclosed CMRI Certified in replacement of LED flameproof wellglass suitable for hazardous area laden with gases or vapours of Group IIA & IIB and Zone 1&2. Die Cast Aluminum housing with heat resistant toughened glass cemented into a retaining ring fixed with screws to the main housing external reflector 40W including matching control gears and lamp complete of Crompton Greaves or equivalent model of Flexpro/Shyaam switchgear (P) Limited/Philips.

M&L concealed point wiring complete with two runs of 2.5 sqmm, single core multi stranded copper conductor PVC insulated and unsheathed FRLS cable, 1100volts grade IS-694 marked drawn through and including rigid steel ERW conduit min 20mm dia ( stove enameled) heavy duty as per IS 9537 Part I and including all necessary flame proof , weather proof conduit accessories and fitting fixed to concealed in wall/ceiling with teflon tape sealed in all threaded joints in conduit and fittings for light points and including 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade earth continuity wire (connecting to earth dolly) for the following incl taking down old unsv wiring complete .

(a) Two light points controlled by one switch

(b) One light points controlled by one switch

Supply and fixing in replacement of switch flame proof rotary type with termination box in LM6, 25 Amps double pole, 250 volts epoxy painted.

Supply and fixing in replacement of MCB SPN 16 amp TO 32 amp, 10KA rupturing capacity class-c (ISI marked IS -8828) fixing in DBs complete all as specified and directed.

M&L sub main wiring with two runs of single core PVC insulated but unsheathed FRLS cable of 4.0 sqmm with multi stranded copper conductors, 1100 volts grade, IS-694 marked , drawn-through rigid steel ERW conduit (stove enameled) 20 mm dia heavy duty and including suitable size and fittings/accessories, concealed in wall with cutting chassis and also including the one run of 4.0 sqmm earth continuity conductor of similar type cable complete all as specified and directed. Note :- Two runs of single core of 4.0 sqmm, one run of 4.0 sqmm earth continuity conductors and one run of 20mm dia ERW conduit with accessories shall be measured as one run length.incl taking down of old unsv sub wiring complete all as specified and direcected

Supply and fixing in replacement SP&N 8 way of factory made mild steel flame froof distribution boards, class LM-6 , protection class (IP-55) CMRI certified suitable for gas group IIA & IIB suitable for mounting MCB/RCCBs, DBs SP&N 8 way, 415 volts conforming to IS-2143 with minimum 200A rating copper bus bar complete all as specified and directed.

Demolition cement concrete (unreinfored) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.

Demolition of cement concrete (reinforced) in landing slab ,chullah hoods ,manhole covers , Roofs ,Floors, beams, stair case, landing, chajja and similar suspended work.

Demolition of brick work built in cement mortar or cement lime mortar including all quion arches

Taking down cement plaster on brick/stone/cement concrete surface of any description including racking out joints hacking for key scrubbing down with water complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters frome the frames) n exc 1.5 but each complete all as specified & directed.

S&F 15mm dia galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings including cutting through wall floor etc including taking down old existing pipe complete all as spd.

S&F 20mm dia galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings including cutting through wall floor etc including taking down old existing pipe complete all as spd.

S&F in repairs vitreous china wash down water closet (Pedastal pattern) Single Piece WC With PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 360x705x705 mm, S Trap- 300 m 'white including seat cover and making good to floor complete all as specified and as directed. Make: Cera, Hindware,and Somany.

S&F in repair oval type vitreous china wash hand basin white colour of size 550mmx400mm fixed in granite slab etc including 32mm dia CP brass waste coupling fitting and union complete all as specified and as directed Make: Cera, Hindware,and Parryware.

S&F Bottle Trap with Fully Casted Body 32 mm with 190 mm and 125 mm Long Connecting Pipess Also available LE-773ML300X125 with 300 mm and 125 mm Long Connecting Pipes complete all as spd. (Make- Prayag Cat No.ALE-773ML 190x125mm)

S&F high density polythelene pipe (HDPE) of 32mm, pressure rating 6 Kgf/cm2 fixed to ceiling, floor etc complete all as specified and directed

S&F in repair vitreous china urinal half stall type white excluding flushing cistern , but including CP urinal spreader, CP waste coupling and waste pipe complete all as specified and directed

S&F in repairs, 15mm bore angle valve chromium plated, fancy type complete all as specified and directed.

S&F in repairs 15mm bore long body bib tap cast copper cromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or bore brass ferrule all as specified. (Make : Prayag Cat No.ORB-105037 , Hindware and Somany.)

S&F in repair 15 mm bore centre hole basin mixer Single Lever without Popup Waste with 450mm Long Braided Hoses complete all as specified and directed.

S&F in repair CP Soap dish all as specified and directed.

S&F in repair soap dispensor with glass bottle all as specified and directed.

S&F in repair Hand Shower (Health Faucet) (ABS Body) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as spd.

S&F in repairs 10 ltrs capacity PVC low level flushing cistern complete with syphon handle lever, PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed.

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed.

S&F in repair single tubular towel rail of brass chromium plated all as specified & directed.

S&F in repair toilet paper holder complete all as specified

S&F 1000 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including 20mm float valve 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of old PVC water tank complete all as specified and as directed.

S&F in repair Vitreous china urinal partition slab white of size 310x700 mm slabs terminating about 40cm above floor line complete all as spd.

S&F in repair 20mm bore Gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed complete

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, incl taking down old existing pipe complete all as specified and directed.

S&F PVC (SWR) pipes of 110 mm nominal outside diameter double socketed in any length with rubber ring joints including all fittings/fixtures fixed on wall or in trenches or in floor incl taking down old existing pipe complete all as specified and directed.

S&F in repair PVC floor trap size 75mm dia out let with CP grating including connection to waste pipe with solvent cement complete all as specified and directed

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cemente.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F PVC (SWR) 'Y' Junction double branch pieces equal or unequal 75mm bore

M&L for brick work with fly ash 'brick (old size brick) straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and as directed

M&L for brick work with fly ash 'brick in any radius built cement mortar 1:4, half brick thick wall complete all as specified and as directed

M&L for 15mm thick rendering in cement mortar 1:6 on other than fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed

M&L for 5mm thick rendering in cement mortar 1:4 on ceiling surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed

M&L preparation of newly plasterd surface of wall and applying two coats of oil bound distemper white or tinted over and including 1mm thick wall care putty complete all as specified and dircted

M&L for preparation of newly plasterd surface of ceiling surface and applying two coats of white wash complete all as specified and dircted

M&L for Complete removal of existing treatment (White wash, colour wash, cement base paint, OBD or any other treatment) of wall by brooming down on steel wire brushing scrapping down smoke soot moulds, moss and efflorescent salts and trading oil greasy spot etc M&L for preparation of new plastered surfaces of walls and applying Finishing walls with Acrylic Smooth interior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of interior primer applied @ 2.20 kg/10sqm incl 1mm thick wall putty complete all as specified and directed.

M&L for preparation of old surface of ceiling and applying two coats of white wash complete all as specified and dircted

S&F Granite (of any type ) work 20mm thick (table rubbed and polished) in steps, jambs, pillars ,window cills,cooking platforms and like (including cutting for fixing of WHB, Sink etc) in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl dismantling old stone slab complete all as specified and directed

M&L non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc, set and jointed in neat cement slurry and pointed in white and coloured cement to match coloured tiles including Screed bed of mortar 15mm thick for laying floor finishes CM (1:6) including dismantling old tiles complete all as specified

M&L for glazed ceramic colour tiles in vertical surface 350X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10 mm thick rendering in CM (1:4), including dismantling old tiles complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed colour PVC sheet & edges will be painted to match with printed sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing

S&F 100mm size stainless steel butt hinges medium weight cold rolled complete all as specified & directed..

S&F Aluminum anodised, barrel tower bolts of extruded section and fixed 150 mm long

S&F extruded aluminium alloy handles 125mm size fabricated type anodized ISI marked.

S&F 25mm dia stainless steel (Grade 304) Curtain rod with SS designer knob fancy type with stainless steel brackets complete all as specified and directed.

S&F 150mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed

M&L for RCC work (Nominal mix) 1:2:4 type B-1 as in landing, cover slabs (for manholes etc) Chajjas, water troughs, managers, shelves and SImilar article with plain faces.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping and similar work.

M&L for TMT bars 10mm dia and over cut to length to shape required including cranking, bending spirally or hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9 mm dia all as specified.

M&L for Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement 2 coarse sand ) to match the existing floors, complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation filling and mass concrete as floor sub base complete all as specified and directed

S&F for 75mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified & as directed.

Dismantling wall and any type of ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness fixed to any type of frame including cover fillets complete all as specified.

M&L for suspended false ceiling system using 4 mm thick 'E' Board ceiling tiles classic/ designer as approved by GE of size 595 x 595mm (as approved by GE) fixed with and including galvanized iron powder coated GI Grid system suspended from ceiling with provision of galvanized wire 4 mm dia with butterfly clips and wall taping screw i, hold down clips for fixing the board to frame complete all as per manufacturer’s instructions, complete, all as directed and specified. (a) Size of grid - 600 x 600 mm. (b) Size of main Tee – 39 x 24 (c) Size of cross Tee – 25X25 (d) Size of wall angle – 22.20 x 22.20

S&F aluminium powder coated ventilators made of the following specifications :- (Net external size of ventilator shall be measured. Following items are included in this unit rate.)

(a) Aluminium frame powder coated styles, bottom, top and middle rail of hollow section 50 mm x 25 mm x 1.80 mm thick.

(b) Lower portion of ventilator shall be fixed with 3 mm thick pin headed glass fixed with suitable aluminium beading clips and EPDM beading (rubber).

(c) Upper portion shall be fixed with louver guides fixed with 3 mm thick pinheaded glass with suitable EPDM beading incl suitable handle and clips.

(d) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with suitable frame in upper panel.

S&F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F 12mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work.

Demolition and breaking up of SWG drain pipes 150 mm internal dia and removing of rubbish to a distance n.exc 50 m complete all as specified.

M&L for Concrete bed for 150mmdia drain pipes laid to falls including packing under and haunching against the sides of pipe after they are laid & tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone agg.) complete all as specified and directed.

M&L for 150mm salt glazed stone ware drain pipes laid in trenches and jointed, all as specified and directed.

M&L for Cement concrete 1:4:8 TypeD-2 (using 40mm graded stone aggregate) in filling and mass concrete compete all as specified and directed.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and get ting out in any type of soil.

Excavating in post holes in any type of soil n. exc. 0.50 cum getting out returning filling in and ramming earth or brocken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n. exc. 50 m and making good surrace complete all as specified and directed.

M&L for hard core of gauge n.exc 63 mm broken stone or boulder spread & levelled in layer n.exc 15 cm thick watered & rammed to a true surface.

M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete complte all as specified and directed.

M&L for Brick work with Sub class 'B' bricks straight or curved on plan exceeding 6m mean radius, built in Cement mortar 1:6

M&L for Rendering 15mm thick cement plaster in CM 1:4 finished even and smooth w/o using extra cement.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-0(using 12.5mm graded crushed stone aggregate) in benching, coping etc including weathering slightly rounded or chamfered angles including necessary form work and finished even and smooth without using extra cement etc complete all as specified & directed.

M&L for PCC 1:2:4 type B0 nominal mix (using 12.5 mm graded crushed stone aggregate) as in floor/Ramp/Post etc surface finished even & smooth without using extra complete all as specified and directed.

M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in footpath / plinth protections, finished even and smooth without using extra cement incl necessary form work complete all as specified.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment quality Fe-410-w gde E-250 complete all as spd.

M&L for two coats of synthetic enamel paint on new steel surfaces over one coat of red oxide over 10 cm width or girth not otherwise describedc, complte all as specified and directed.

M&L for Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L for 200 x 200 mm x 25 mm thick chequred cement concerete tile of glossy finished approved pattern and colour textured in floors set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match incl 15 mm screed bed in Cement mortar 1:4 all as specified and directed.

Taking down carefully copper/Aluminium point wiring for light/fan/socket/light fitting/power point and taking down of teak wood batten/PVC casing caping/PVC conduit/steel conduit and making good disturbed surfaces of walls/ceilings/floors etc incl dismentling of fittings.

M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 Volts grade confirming to IS-694 drawn through and including non metallic rigid PVC heavy duty conduit in concealed (min 20 mm external dia) but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part-I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recesed in wall or ceiling including 1.5 mm FRLS PVC insulated unsheathed coper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bkellite white/coloured top sheet cover 3.0 mm thick for one light point controlled by one may switch all as specified & directed.

All as per items No 112 here-in-before but for one exhaust point controlled by one switch and regulator.

All as per items No 112 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 AMP switch on same board.

All as per items No 112 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 AMP switch on independent board.

All as per items No 112 here-in-before but for one 3 pin 15/16 Amp socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.

Supply and fixing switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts.

Supply and fixing switch piano, flush type, single pole, two way, 5 Amps, 230 Volts.

Supply and fixing switch piano, flush type, single pole, one way, 15 Amp, 230 Volts.

Supply and fixing socket outlet, 3 pin (with 2 pin outlet also) 5/6 Amp, flush type, 240 Volts.

Supply and fixing socket outlet, 2 in 1, 3 pin, 5 and 15 Amp, flush type, 240 Volts.

Supply and fixing ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified.

Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexib le copper conductor cases of suitable size complete.

Supply and fixing lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.

S&F LED bulb energy saving 10/11 W complete all as specified and directed Make : Havells/Crompton/Syska

S&F sheet metal enclosures double door type suitable for fixing MCB's SPN with 200 Amps rate bus bar, 8 way, 240 Volts.

S & F MCB 63 Amp, three pole & neutral, 415 Volt complete all as pecified & directed.

S & F MCB 32/40 Amp, single pole & neutral,240 Volt complete all as pecified & directed.

S & F MCB 6-40 Amp, single pole 240 Volt complete all as pecified & directed.

S&F sub main wiring on and including passing through PVC conduit pipe 1100 Volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 including taking down existing U/S sub main wiring. (Note: Two runs of cable with one run of earth wire and one run of PVC Coundit should measured as one length)

Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed.

Supply and fixing in repair 25 mm GI water tubing IS-1239 marked, medium grade, in replacement including all necessary pipe fittings laid in trenches, on wall, under floor, under road on same or new route and making good the disturbed portion as existing and including taking down of old unserviciable pipe of the following sizes :- Note :-excavation earth work will be measured and paid saperatly.

supply and fix exhaust fan PVC body AC single phase 230/240 V of size 300 mm sweep with louver all as specified and directed by ebgineer-in-charge

PD GUPTA AND COMPANY (BID ID -3149579)

S.R.Enterprises (BID ID -3150080)