Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹16.7 LAccepted-AOC SANDHYA NIWAS MAGADH COLONY ROAD NO 03 SHERGHATI ROAD PS MAGADH MEDICAL COLLAGE DIST GAYA PIN 823001 BIHAR | GAYA | BIHAR | 823001 | 1 | Accepted-AOC ok | |
| 2 | 2₹17.2 L+₹29,087.78 (1.72%)Rejected-Finance | 2 | Rejected-Finance Quoted rate more than L1 | |
| 3 | 3₹17.5 L+₹55,867.03 (3.31%)Rejected-Finance D 9 NETAJI NAGAR KANTATOLI COLONY RANCHI 834001 | RANCHI | RANCHI | JHARKHAND | 834001 | 3 | Rejected-Finance Quoted rate more than L1 | |
| 4 | 4₹17.5 L+₹56,608.52 (3.35%)Rejected-Finance WAXPOL ROAD NEAR MILITARY GATE BUTI MORE PS SADAR RANCHI JH 835217 | RANCHI | JHARKHAND | 835217 | 4 | Rejected-Finance Quoted rate more than L1 | |
| 5 | 5₹18.0 L+₹1.1 L (6.64%)Rejected-Finance KRISHNA NAGAR BOOTY RANCHI 835217 | RANCHI | JHARKHAND | 835217 | 5 | Rejected-Finance Quoted rate more than L1 |
Tender Value
Refer Docs
EMD Value
₹47,560
Closing Date
6 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dipatoli
GARRISON ENGINEER MILITARY ENGINEER SERVICES DIPATOLI CANTT PO- HOTWAR RANCHI Pin- 834012
SPL REPAIR TO BLDG NO P-86 (8 QTRS) GOVT MD ACCN OF JAK RIF AT DIPATOLI POCKET UNDER GE DIPATOLI
2023_MES_623542_1
8000/1933/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Dipatoli
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Dipatoli
₹47,560
Yes
26 Dec 2023
16 Oct 2023
8 Nov 2023
16 Oct 2023
6 Nov 2023
30 Oct 2023
Amount
Demolition of plain cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level including removal of same to exceeding 1 Km but not exceeding 1.5 Km, complete all as specified and directed.
Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement , complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) with using WPC (WPC shall be measured seperetly)on wall finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.
M&L for 10 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as specified and directed.
M&L for preparing newly platered surfaces and applying two coat of distember oil emulsion white or tinted on ceiling complete over one coat of primer all as specified and directed
M&L for complete removal of existing treatment and applying two coats of distember oil emulsion white or tinted on ceiling complete over one coat of primer all as specified and directed
M&L for preparing newly platered surfaces and applying two coat of distember oil emulsion white or tinted on walls complete over one coat of primer including one coat of 3mm thick wall care putty on walls all as specified and directed
M&L for complete removal of existing treatment and applying two coats of distember oil emulsion white or tinted on walls complete over one coat of primer including one coat of 3mm thick wall care putty on walls all as specified and directed
M&L for preparing the new plastered surfaces and applying two coats of exterior Emulsion weather proof coat white or tinted on walls/soffit of chajja surfaces complete all as specified directed.
M&L for complete removal of existing treatment and applying two coats of exterior Emulsion weather proof coat white or tinted on walls/soffit of chajja surfaces complete all as specified directed.
S&F in repair for 10ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed.
Demolition of side wall and top of old RCC water tanks 1000/500 ltrs capacity excluding tank beam and tanks bottom slab after removing existing inlet and outlet connection with all fitting and reparing remaining structure with plastering and making the surface flat and level in CM 1:4 complete all as specified and directed.
Dismantling of existing water tanks and removinging to store and S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed , complete all as specified and directed.
S&F in repair for PVC connection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as specified and directed.
Taking up or down steel tubing and connection of 15 mm bore complete all as specified directed at site , complete all as specified and directed.
All as per item No 16 above but for 20 mm dia bore pipe, complete all as specified and directed.
S&F steel tubing and connection tubing in new or old position to walls, ceiling, floors etc including all fitting as socket,elbow,nipple,union etc complete all as directed at site for 15 mm bore all as specified.
-Ditto-All as above item No 18 but for 20 mm dia, complete all as specified and directed.
S&F 15 mm Angle/Stop valves, fancy type chromium plated, or butterfly handle, screwed both ends for iron pipe or for unions and fixed , complete all as specified and directed.
S&F in repair, 15mm bore bib taps fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed
S&F in repair, 15mm bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed) screwed down,high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.
S&F in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed , complete all as specified and directed.
Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter without taking of shutter from framed complete incl removing from site, complete all as specified and directed.
Taking down chowkhats or frame exc 1.50 Sqm each with shutter without taking of shutter from framed complete incl removing from site , complete all as specified and directed.
Taking down shutters of any description exc 1 sqm and n. exc 2 sq m each and removing from site , complete all as specified and directed.
Resecuring or easing and adjusting without taking down shutter of any description exc 1 sqm and n exc 2 sqm each complete all as specified , complete all as specified and directed.
M&L for PCC 1:2:4 type B1 using 20mm graded stone agg as in coping, bed plate etc complete , complete all as specified and directed.
M&L for 2ndclass hard wood plain,solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fixed , complete all as specified and directed.
M&L for 2nd class hardwood of sectional area exc.13 & n.exc 25 sqcm in plain fillets,square rectangular in section,clean sawn,secured with nails complete all as specified and directed
M/L for 35mm thick 2nd class HW rail and style plain framed, factory made paneled shutter (one panel) without interlocking rail and 12mm veneered particle board with commercial veneering on both faces the size of rail and style as per IS -1003 (Pt-I)kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 2nd class HW glazed and skeleton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass. Gauze etc and all as specified in SSR and fitted to chowkhats , complete all as specified and directed.
S&F powder coated aluminium window shutter sliding type with frame of powder coated aluminium channel section suitable for sliding aluminium shutters weighing 0.55 Kg/M including necessary joining cleats glazing clips rubber packing powder coated aluminium shop beading screws with two shutter including 5mm thick coloured glass and one shutter with stainless steel wire gauge including necessary locking arrangement and handle etc., as specified etc., complete all as specified and directed
S&F powder coated aluminium ventilator louvre type with frame, aluminium section weighing 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc., complete all as specified and as directed
S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified.
S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame , complete all as specified and directed.
S&F in repairs for galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm, complete all as specified and directed.
S&F Hasp and staple safety type aluminium anodized hinges pin incl bolt to hinges plate 125 mm long , complete all as specified and directed.
S&F butt hinges 100mm long medium weight cold rolled MS and fixed , complete all as specified and directed.
S&F extruded aluminium alloy butt hinges 100mm size type B-21 all as specified & directed.
S&F 150 mm long aluminum anodized barrel tower bolt extruded section , complete all as specified and directed.
S&F aluminum handles cast type anodize 150 mm long , complete all as specified and directed.
S&F aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alumionium alloy and fixed 300mm long. all as specified
S&F in repair 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and direcetd.
S&F in repair for curtain rails, anodised aluminium alloy with fixing brackets,stops,rollers etc., complete all as specified and directed.
M&L applying two coat of synthetic enamelled paint over one coat of pink primer on new wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of new surface all as specified and directed
M&L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface all as specified and directed
M&L for preparing the newly surface of any description not otherwise described over 10 cm width or girth on steel surface and applying two coats of synthetic enamel paint over one coat of zinc chromate primer all as specified and directed
S&F prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed in repair to timber frame work all as specified and directed
Dismantling of boarding any description, fixed in any position with screws all as specified and directed
S&F 30mm continues piano hinges mild steel bright finish or elec-trogalvanised complete all as specified and directed.
S&F in repairs for shower rose chromium plated with or without swivel joints 125 mm dia complete all as specified and directed
M&L in repairs for pillar tap of 15mm dia bore pipe, fancy type cast copper alloy with capstain head chromium plated with or without lettered “hot or cold” with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.
S&F in repair vitreous china wash basin, white flat back size 550 x 400 mm including waste, chain & plug and poreclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waste pipe fitted complete all as specified and directed
M&L for roof treatment in repair by complete removel of existing old treatment and treated with following specifications :- (a) Brushing neat cement slurry @ 3Kg per Sqm on roof slab. (b) 15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC on roof slab. (c) Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface. (d) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture's instruction. (e) Applying two coat of aluminium paint @200 gm/Sqm over bituminous surface of membrane. Note : Supply only WPC shall be measured and paid separately under relevant item.
Supply only integral water proofing compound , complete all as specified and directed.
S&F brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
M&L for coloured glazed ceramic tiles in vertical surface 300x200x5 to 6mm thick over10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces, complete all as specified and directed.
M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but n.exc 0.11sqm infloor etc,over 15 mm thick screed bed in CM(1:4),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site, complete all as specified and directed.
M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.
M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.
S&F PVC (SWR) bends 110 mm bore of any radius all as specified & directed
S&F PVC (SWR) bends 75 mm bore of any radius all as specified & directed..
S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door all as specified & directed..
S&F PVC (SWR) junction single (singleT) equal or unequal 75mm bore provided with access door all as specified & directed..
S&F 110 mm bore PVC (SWR) vent cowl, complete all as specified and directed.
S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement, complete all as specified and directed.
S&F 110mm dia PVC (SWR) WC connector with lip ring, complete all as specified and directed.
M/L PCC (1:2:4) type B1 using 20mm graded stone aggregate as in sunken floor .average thickness 50mm and making adequate slop towards spout pipe etc complete all as directed.
M&L rendering 10mm thick on fair faces of brick or concrete surfaces and finishing the surfaces fair and even without using extra cement in CM (1:4) with WPC (WPC will be measured and paid separately) complete all as directed at site.
M&L for PCC (1:5:10) type E2 using 40mm graded brick aggregate as in sunken portion complete all as directed.
S&F 32 mm dia GI spout light grade for sunken portion complete all as directed at site.
M&L for bitumen blown 85/25 applied hot two coats to concrete surfaces at rate of 1.2 Kg/sqm per coat complete all as directed at site.
M&L for polythene film black 200 micron laid in floors etc complete all as directed at site.
S&F vitreous china squatting pan ORRISA Pattern of size 580x 440mm white with integral foot rest complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints all as directed.
M&L for 100 mm thick PCC 1:4:8 Type D-2 using 40mm graded aggregate as in sub base all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 Type C-2 using 40mm graded aggregate as in plinth protection etc finished cement concrete surface even and smooth without using extra cement all as specified.
M&L for repair and rendering 10mm thick in cm 1:3 on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs all as directed.
S&F in repair stainless steel kitchen sink with drainage board 1 mm thick including bedding in cement mortor on to dwarf wall or including fixing cantilever brackets over all size 915 mm x 460mm bowl size 410 mm x 330 mm x 160 mm and including 38/40mm dia waste pipe , complete all as specified and directed.
S&F utensil rack / Kitchen rack stainless steel size 900 mm x 900 mm x 250 mm and 1 mm thick approved Make complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. etc complete all as specified and directed.
Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.
Taking down old/unserviceable MCB DB SPN any capacity by disconnection of electric connection including MCBs,Isolators,etc and making good to disturbed surface complete all as specified and directed.
Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and directed.
M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade , drawn through PVC concealed conduit 20/25 mm dia on wall/ceiling ,including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes ,cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: The rate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.
All as per Ser item No 88 here-in-before but one 3 Pin Socket out let 5 Amps on the same board.
All as per Ser item No 88 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board.
All as per Ser item No 88 here-in-before but one bell/buzzer point controlled by one push button on the independent board.
All as per Ser item No.88 here - in - before but one light point controlled by two 2 - way switches,with wire 1.5 Sqmm size
All as per Ser item No 88 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly.
S&F Switch Piano type 2 way switch 5 amp 230 v complete all as specified and directed at Site.
Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified & directed.
S&F Switch piano type , single pole , one way 15 Amps complete all as specified and directed.
S&F Socket out let 2-in-1 2/3 pin 5 Amps complete all as specified and directed.
S&F Socket outlet 2-in-1, 3 pin ,5 and 15 amps , flush type complete all as specified & directed.
S&F in replacement electric Bell, ding dong type AC 230 Volt single pole complete all as specified & directed at site.
S&F in replacement Bell push 5 Amps for electric Bell/Buzzer, AC 230 Volt single pole complete all as specified & directed.
S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed.
S&F electronic regulator step type 230 Volts single phase 120 watt complete all as specified and directed at site.
M&L for lamp holder , PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed at site.
M&L for submain complete with 2x1.5 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)
All as per ser item No-104 here-in-before but 2X2.5 Sqmm and 1X 2.5 Sqmm for Earth wire
All as per ser item No-104 here-in-before but 2X4 Sqmm and 1X 4.0 Sqmm for Earth wire
All as per ser item No-104 here-in-before but 2X 6 Sqmm and 1X 6.0 Sqmm for Earth wire
Supply and fix MCB DB SPN 8 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories , complete all as specified and directed..
Supply and fix MCCB DB TPN 4 way with metal door suitable for Provision of incommer and out going MCCB grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed.
Supply and fix in replacement MCCB 100 Amp 415 volts 16kA 4 pole complete all as specified and directed .
S&F in replacement of MCB SP 6 to 32 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.
S&F in replacement of MCB DP 40 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles , complete all as specified and directed.
S&F in replacement of isolator DP 63 Amps 'C' Series fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.
S&F in replacement of LED tube light fitting 20 watt 230 Volt decorative ultra slim linear LED Lighting with aluminium housing & integrated electronic driver , including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed .
S&F in replacement of environmental friendly, ultra modern, energy saving, surface mounted, decorative oval plastic bulk head LED light fittings 10 watt capacity ,comprising of high brightness LEDs, IP54 protection complete with all accessories internally pre-wired and inncluding connecting up with 2/3 core twisted flexible copper conductor cable with suitable size of flexible PVC/steel Conduit complete all as specified and directed at site.
S&F in replacement of building LED security light fitting 40 Watt in aluminium pressure die cast aluminium housing with high power LED as lightning sourse and lens embedded PC Cover having IP 65 protection and impect resistance of IK07 with 10 KV Built in super protection device. luminaire with high power LED as light source including suitable size of GI bracket fixed with two Nos GI clamp nut,bolt,washer etc complete all as specified and directed at site.
M&L for rewinding repair and greshing of ceiling fan of any size sweep single phase. Ceiling fan of any size opening from any height or any locations, fan opening from hook, clamp & refixing the same after cleaning and greshing with required necessary cutting/welding/granding job or required store such as nuts, bolts, washer and suitable length mild steel/ down rod duly making holes etc complete as specified and directed.
S&F for highly efficient LED bulbs, 10 W complete all as specified and derected
S&F steel body exhaust fan single phase 300 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed.
Supply, Laying on replacement ,connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable all as directed.
Excavation in trenches in loose/soft soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete, all as specified.
Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.
Returning & filling in including spearing, leveling watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.
Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed.Note : Punned down thickness shall be considered for measurement , complete all as specified and directed.
Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed
M &L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed. Note :- i) Earthing test must be carried out in presence of Engr-in-Charge. ii) The earthing result not more than 2 Ohms or disered earth resistance value. iii) Megger required for testing will be be provided at site by the contractor. iv) Contractor shall submit earth resistance testing report before submission of bill.
MS JODHI PRASAD SINGH SONS
M/s Kundu Enterprises
M/s Animesh Kumar & Co.
M/S OMANIA ENTERPRISES
M/S ROHIT CONSTUCTION
M/S Sweta Construction
M/s Ray construction
united builders
HARINANDAN RAI SONS
96archana ent
ashiyana electrical company
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .