REPAIR/RESURFACING OF ROAD, FOOTPATH AND ALLIED WORKS AT OLD CANTT ALLAHABAD UNDER GE (EAST) ALLAHABAD

Amount

M&L for repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming, complete all as specified and directed.

M&L for premix bituminous macadam laid, rolled and compacted to required gradient and camber using binder (paving bitumen VG 30) with 4% by weight of total mix all as specified (consolidated thickness 75 mm or less) all as specified in particular specifications. Note:- (i) The quoted rate shall be worked out on the basis of binder contents (bitumen VG-30) of 4% by weight of total mix. (ii) Work shall be executed as per design mix as approved by GE and less bitumen shall be deducted from the quoted rate.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-10 grade @ 5 Kg per Ten Sqm on black top surface and applying 30mm thick (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5% paving binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed. NOTE: (i) Bituminous premixe asphaltic semi dense concrete work shall be executed as per design mix as approved by GE. (ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government. (iii) Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-10 grade @ 5 Kg per Ten Sqm on black top surface and applying 40mm thick (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 4.5% paving binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed. NOTE: (i) Bituminous premixe asphaltic semi dense concrete work shall be executed as per design mix as approved by GE. (ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government. (iii) Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed.

M&L for cleaning dirt, oil/ grease spots and foreign materials etc, from old/ new road surface and applying 2.5mm thick thermo plastic (retro reflective) road marking paint for marking white traffic lines, straight or curved, having clear and sharp edges over road surfaces by using thermo plastic paint applicator machine and necessary T&P, including cleaning of roads surfaces, heating the paints within temperature limits specified by the manufacturer, making proper arragement for traffic during operation etc. complete all as specified and directed. Make: Asian/ Nerolac/ Berger Paints. NOTE: Thermo plastic paint material shall consist homogeneously composed of pigment, resins and glass reflecto rizing beads in required proportion as per MORTH specification and conforming to relavent IS.

S&F in repair of colour reflective pavement marker (Cat Eye) with Micro prismatic lens in both direction having thermoplastic body with flex resistant base & abrasion resistant crfeamer coating fixing of road surface with special adhesive and suitable reivet. Head nail complete all as specified and directed. Make :- Dark Eye/3M or equivalent as per sample approved by GE.

S&F in repair solar road studs of dimension (125mmx125mm x25mm) shank 60mm of any coloured 100% water proof design acording to IP 65 working temp 10 to 75 degree centigrade high efficiency mono crystalline solar panel 2.4V/0.30 watt and rechargeble nickel cadmium battery (1.2V/1600Mah) six super bright LED with 10000 to 18000 mcd(milicandela) , complete all as specified and directed. Make :- Dark EYE (DHRUV) 3M India ACE polymers / Gogia plastics or equivalent as approved by GE.

S&F 90 degree road side safety unbrakable trafic convex oval mirror 60cm dia including stand and all necessary fittings complete all as specified and directed by Engineer-in-charge. Make : As approved by GE.

M&L precast PCC 1:2:4 type B-1 using 20mm graded stone aggregate solid blocks as in road side kerbs of size 450mmx150mmx250mm set in cement mortar 1:4 including demolition of old precast solid block complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of primer on new plastered surface/concrete surfaces of any description over 10cm girth or width including preparation of surfaces as in painting on centre divider complete all as specified and directed.

M&L for 80mm thick M-40 grade factory made rubber moulded machine pressed precast cement concrete interlocking paver block in approved design and colour conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling, sub base of floor and mass concrete complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facing, dressed stone work and precast concrete articles etc. complete all as specified and directed.

M&L for brick work with Fly Ash old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and finished surface fair and even , complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping including weathering slightly , rounded or chamfered on edges including form work complete all as specified and directed.

M/S NAGENDRA AND BROS ENTERPRISES

M/S A P CONSTRUCTION

M/S V K MEHROTRA

M/s M A Traders

Frends Enterprises

M/S C L GUPTA AND SONS