Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.8 LAccepted-AOC ANANDAPALLY WARD NO VII P O P S MAL DIST JALPAIGURI PIN 735221 WB | MAL | JALPAIGURI | WB | 735221 | ₹33.8 L Quoted ₹34.8 L | L1 | Accepted-AOC Accepted |
| 2 | L2₹36.3 LRejected-Finance RATNA RAJ BUILDING 1ST FLOOR 262 BIDHAN ROAD OPP TERA HOTEL WEST BENGAL | MEDINIPUR WEST | WEST BENGAL | 712122 | ₹36.3 L | L2 | Rejected-Finance Not Lowest |
| 3 | L3₹36.4 LRejected-Finance | ₹36.4 L | L3 | Rejected-Finance Not Lowest |
| 4 | Rejected-Technical OODLABARI P O MANABARI DIST JALPAIGURI WB PIN 735222 STATE WEST BENGAL | JALPAIGURI | WEST BENGAL | 735222 | - | - | Rejected-Technical Rejected due to not in appropriate category. |
| Sl No | Description | Qty | Unit | ENGINEERING AND CONSTRUCTION CO. L2 | M/S SANJIB DEY SARKAR L3 | BIJOY DEY L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for foundation, laying GI pipes and UG cables etc not exc 10 sqmtr on plan, in soft/loose soil and getting out complete all as specified and directed. | 404 | CUM | 90 ₹36,360 | 128 ₹51,712 | 180 ₹72,720 |
| 2.00 | Excavation in trenches not exceeding 1.5 mtr wide and exceeding 1.5 mtr but not exceeding 3.0 mtr deep for foundation, laying GI pipes and UG cables etc not exc 10 sqmtr on plan, in soft/loose soil and getting out complete all as specified and directed. | 1 | CUM | 200 ₹200 | 205 ₹205 | 380 ₹380 |
| 3.00 | Returning filling in with approved excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. | 360 | CUM | 50 ₹18,000 | 48 ₹17,280 | 80 ₹28,800 |
| 4.00 | Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed. | 45 | CUM | 60 ₹2,700 | 76 ₹3,420 | 180 ₹8,100 |
| 5.00 | Materials and labour for 50 mm outer dia double wall corrugated (DWC SN-8) HDPE pipe, ISI marked for enclosing cable below ground/road surface to a required depth including suitable size couplers for jointing of pipe all as per site requirement etc complete all as specified and directed. | 870 | RM | 50 ₹43,500 | 54 ₹46,980 | 50 ₹43,500 |
| 6.00 | Materials and labour for 75 mm outer dia double wall corrugated (DWC SN-8) HDPE pipe, ISI marked for enclosing cable below ground/road surface to a required depth including suitable size couplers for jointing of pipe all as per site requirement etc complete all as specified and directed. | 1,000 | RM | 80 ₹80,000 | 91 ₹91,000 | 72 ₹72,000 |
| 7.00 | Materials and labour for GI tubing of 40 mm bore light grade with all fitting fixed to wall/ceiling/pole or in trench formed by road/PCC cutting/boring as cable protection laid on floor all as specifed and directed. | 20 | RM | 400 ₹8,000 | 271 ₹5,420 | 320 ₹6,400 |
| 8.00 | Materials and labour for GI tubing of 50 mm bore light grade with all fitting fixed to wall/ceiling/pole or in trench formed by road/PCC cutting/boring as cable protection laid on floor all as specifed and directed. | 20 | RM | 450 ₹9,000 | 337 ₹6,740 | 340 ₹6,800 |
| 9.00 | Materials and labour for GI tubing of 80 mm bore light grade with all fitting fixed to wall/ceiling/pole or in trench formed by road/PCC cutting/boring as cable protection laid on floor all as specifed and directed. | 10 | RM | 900 ₹9,000 | 601 ₹6,010 | 550 ₹5,500 |
| 10.00 | Supply and laying in trenches/wall LT UG XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 95 sq mm x 3.5 core including taking down old unserviceable cable and making necessery connections all as specified and as directed. | 400 | RM | 760 ₹3.0 L | 646 ₹2.6 L | 560 ₹2.2 L |
Updated dates
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
15 Dec 2025, 6:00 pmClosed
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
REPAIR/MAINTENANCE TO E/M INSTALLATIONS AND E/M INFRASTRUCTURE AT BAGRAKOTE MIL STN UNDER GE SEVOKE ROAD
2025_MES_739294_1
8538/SEV OF 2025-26
Open Tender
Civil Works
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUS
8 documents required · 8 mandatory
₹500
GE SEVOKE ROAD
₹96,000
19 Jan 2026
11 Nov 2025
17 Dec 2025
11 Nov 2025
15 Dec 2025
26 Nov 2025
12 Nov 2025 - 21 Nov 2025
Amount
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for foundation, laying GI pipes and UG cables etc not exc 10 sqmtr on plan, in soft/loose soil and getting out complete all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr wide and exceeding 1.5 mtr but not exceeding 3.0 mtr deep for foundation, laying GI pipes and UG cables etc not exc 10 sqmtr on plan, in soft/loose soil and getting out complete all as specified and directed.
Returning filling in with approved excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed.
Materials and labour for 50 mm outer dia double wall corrugated (DWC SN-8) HDPE pipe, ISI marked for enclosing cable below ground/road surface to a required depth including suitable size couplers for jointing of pipe all as per site requirement etc complete all as specified and directed.
Materials and labour for 75 mm outer dia double wall corrugated (DWC SN-8) HDPE pipe, ISI marked for enclosing cable below ground/road surface to a required depth including suitable size couplers for jointing of pipe all as per site requirement etc complete all as specified and directed.
Materials and labour for GI tubing of 40 mm bore light grade with all fitting fixed to wall/ceiling/pole or in trench formed by road/PCC cutting/boring as cable protection laid on floor all as specifed and directed.
Materials and labour for GI tubing of 50 mm bore light grade with all fitting fixed to wall/ceiling/pole or in trench formed by road/PCC cutting/boring as cable protection laid on floor all as specifed and directed.
Materials and labour for GI tubing of 80 mm bore light grade with all fitting fixed to wall/ceiling/pole or in trench formed by road/PCC cutting/boring as cable protection laid on floor all as specifed and directed.
Supply and laying in trenches/wall LT UG XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 95 sq mm x 3.5 core including taking down old unserviceable cable and making necessery connections all as specified and as directed.
All as item No 10 but of size 70 sqmm 3.5 core
All as item No 10 but of size 50 sqmm 3.5 core
All as item no 10 but of size 16 sqmm 4.00 core
All as item no 10 but of size 10 sqmm 4 core
All as item no 10 but of size 10 sqmm 2 core
Supply and fixing Steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screws of type 410 SP-31 ( 9 metre long) including dismantling old unserviceable pole complete all as specified and directed.
Supply and fixing GI strip 32 x 6 mm as eath continuity conductor or main earthing lead buried in ground or drawn through pipes or fixed to wall or poles or any other situation for loop earthing etc including dismantling old unserviceable strip complete all as specified and directed by Engr-in-Charge.
Materials and labour for PCC, type C1, (1:3:6), using 20mm graded crushed stone aggregated, as in coping of poles including formwork including demolition of old damaged concrete from pole complete all as specified and as directed
Materials and labour PCC, type D2, (1:4:8), using 40mm graded crushed stone aggregated as in PCC/Road cutting /installation area and foundation of pole etc complete all as specified and as directed.
Materials and labour for boring holes 1mtr deep in soil under roads/PCC as directed for cable passing through pipes of required size and disposal of soil to a distance not exc. 50m. (Note: Connected items like Pipes is measured and paid seperately under relevant items).
Supply and fixing in repair Indicator lamp (AC/DC), LED, type for as per existing fitting.complete all as specified and as directed by Engr-in-Charge.
Supply and fixing in repair 3 Phase LED Ammeter complete all as specified and as directed by Engr-in-Charge.
Supply and fixing in repair, 3 phase LED Voltmeter complete all as specified and as directed by Engr-in-Charge.
Supply and fixing cable jointing kit for 1.1 KV grade for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5/4 core XLPE, armoured, aluminium conductor cable of size 25 to 50 Sqmm, Outdoor type, including taking out & relaying damaged UG cable after repair complete all as specified and as directed. (Note:- Excavation and connected items will be measured and paid separately)
Supply and fixing cable jointing kit for 1.1 KV grade for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5 core XLPE, armoured, aluminium conductor cable of size 70 to 120 Sqmm, Outdoor type, including taking out & relaying damaged UG cable after repair complete all as specified and as directed. (Note:- Excavation and connected items will be measured and paid separately)
Supply and fixing as in repairs MCCB four pole , 415 Volt, 63 Amps,16 KA , fixed thermal & magnetic setting complete all as specified and directed
Supply and fixing as in repairs MCCB four pole , 415 Volt, 100 Amps,16 KA , fixed thermal & magnetic setting complete all as specified and directed .
Supply and fixing as in repairs MCCB four pole , 415 Volt, 125 Amps,16 KA , fixed thermal & magnetic setting complete all as specified and directed.
Supply and fixing MCCB, 160 Amps, 4P, 25 kA, 415 Volts, with adjstable thermal release & adjustable magnetic release complete including taking down old unserviceable MCCB complete all as specified and as directed. .
Supply and fixing MCCB, 200 Amps, 4P, 25 kA, 415 Volts, with adjstable thermal release & adjustable magnetic release complete including taking down old unserviceable MCCB complete all as specified and as directed.
Supply and fixing MCCB, 250 Amps, 4P, 25 kA, 415 Volts, with adjstable thermal release & adjustable magnetic release complete including taking down old unserviceable MCCB complete all as specified and as directed.
Supply and fixing MCCB, 400 Amps, 4P, 36 kA, 415 Volts, with adjstable thermal release & adjustable magnetic release complete including taking down old unserviceable MCCB complete all as specified and as directed.
Supply and fixing MCCB, 630 Amps, 4P, 36 kA, 415 Volts, with adjstable thermal release & adjustable magnetic release complete including taking down old unserviceable MCCB complete all as specified and as directed.
Materials and labour for earthing complete with galvanized steel pipe electrode 40mm bore, medium grade, 3.5 meters length, buried directly and preferably vertically in ground with top edge not less than 1.25 meters below ground level connected with earthing lead galvanized iron strip of size 25x4 mm connected to galvanized earth pipe by means of bolts, nuts, checknuts and washer of galvanized iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanized steel tube for watering with one end fix with cast iron funnel and wire-mesh, with protection pipe of 32 mm dia light grade galvanized steel tubing upto 7.5 meters length for drawing earthlead including common salt, charcol , bentonite in alternate layers etc all in around of earthing pipe of 600mm dia, complete all as shown in EP number 2 of SSR Part-1 including testing on completion and including taking down old U/S earthing & testing complete all as specified and as directed.
Materials and labour for water proof, 3core PVC insulated and PVC sheathed, copper conductor cable of size 1.5 sqmm, 1100 Volts grade for electrical connection of street light fittings, complete all as specified and directed.
Supply and fixing thermoplastic polycarbonate cable junction box having protection IP 66 "dust proof, acid resistant, shock proof, fire retardent self extinguisher" for outside installation with knockout entry for cable of size 16 sqmm and 155x210x92 mm with terminals, brackets for street light pole mounting and provision of one 6A MCB SP all as specified and as directed.
Materials and labour for painting old painted LT Panel/feeder pillar by two coats of synthetic enamel paint after preparation of surfaces complete all as specified and as directed.
Servicing of LT Panel after shut down and removing all dust particles and proper layout of LT panel wlth gland packing including 2.5 sqmm copper single core copper cable including repairing/replacing door hinges/door lock etc for necessary connections complete all as specified and directed
Materials and labour for Preparation of metalic surface with sand paper for street light pole and other steel surface complete all as specified and as directed by Engr- in-Charge
Materials and labour for one coat of red oxide zinc chrome primer on steel surfaces of street light pole and other steel surface complete all as specified and as directed by Engr- in-Charge
Materials and labour for aluminium paint two coats on newly primed metalic surface of street light pole and other steel surface complete all as specified and as directed by Engr- in-Charge
Materials and labour for two coats of Yellow/black synthetic enamel paint on metalic surface complete all as specified and as directed by Engr- in-Charge
Materials and labour for preparation of old decorated concrete/plastered surfaces and applying two coats of Cement based paint complete all as specified and as directed by Engr- in-Charge
Labour only for taking down any unserviseable street light fittings/flood light/garden light/gate light/fountain light fitting any type/size and refixing same after repair/replacement of all unserviceable accessories of any type and size from existing position/location or removing connection by cleaning terminals and shifting materials to store for keeping in safe custody for repair work or taking credit complete all as specified and as directed. (Note: Items required for repair work/replacement will be measured and paid seperately under relevant items as supply only)
Supply only new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium street security light with high power LED as light source lamp type 70 W Lumen output 140 lumen/watt with SPD, IP 66 protection with toughened glass cover incl fixing GI pipe complete all as specified and as directed.
Supply only new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium street security light with high power LED as light source lamp type 60 W Lumen output 140 lumen/watt with SPD, IP 66 protection with toughened glass cover incl fixing GI pipe complete all as specified and as directed.
Supply only new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium street security light with high power LED as light source lamp type 90 W Lumen output 140 lumen/watt with SPD, IP 66 protection with toughened glass cover incl fixing GI pipe complete all as specified and as directed.
Supply only post top lantern LED type, 20 watt, 230 volts AC outdoor type with decorative post top for 360 degree indirect light, IP 65 protection with pressure die cast powder coated housing and PC diffuser luminaire, with impact and corrosion resistant complete with driver and lamp.
Supply only post top lantern LED type, 40 watt, 230 volts AC outdoor type with decorative post top for 360 degree indirect light, IP 65 protection with pressure die cast powder coated housing and PC diffuser luminaire, with impact and corrosion resistant complete with driver and lamp.
Supply, fixing, testing and commissioning of LED flood light fitting 100 W new generation energy saving and enviromental friendly, long life, versatile pressure die cast aluminium IP 65 PDC floood light aesthetically designed with better thermal management with electronic driver complete all as directed by Engr-in-Charge
S & F all in one solar LED security light 30 watt made with High Efficiency Mono Crystalline Solar PV Module, Lithium Ferro Phosphate battery with in-built BMS technology, High Efficacy LED, MPPT Solar Charge Controller and Aluminium Extruded body & is specially progrmmed to automatically control the dimming and brightness of lightincluding taking down old panel and street light complete all as specified and directed.
S & F all in one solar LED security light 60 watt made with High Efficiency Mono Crystalline Solar PV Module, Lithium Ferro Phosphate battery with in-built BMS technology, High Efficacy LED, MPPT Solar Charge Controller and Aluminium Extruded body & is specially progrmmed to automatically control the dimming and brightness of lightincluding taking down old panel and street light complete all as specified and directed.
S & F in repair 5 KW ,three phase automatic Street Light timer switch for automatic switching on/off street light based on lux level of nature light, consisting of sensor overload protection fuse gear, power contactor & MCB of suitable capacity, terminal blocks for cable entry & control unit enclosed in pole/Wall mountable elcosure made out of rust proof, shock proof, termite proof FR grade SMC, conforming to IP 66 with universal lock and key arrangement complete all as specified and as directed by Engr- in- Charge Make: kakatiya energy system Pvt Ltd Cat No. Swadeep 66-02EC-5KW 3P or equivalent in Havells/GE
Supply only LED driver for 45/60/72 Watt LED street light complete all as specified and as directed.
Supply, fixing, testing and commissioning of LED flood light fitting 200 W new generation energy saving and enviromental friendly, long life, versatile pressure die cast aluminium IP 65 PDC floood light aesthetically designed with better thermal management with electronic driver complete all as directed by Engr-in-Charge
Supply Only Bollard light LED 9 watt 3000K complete all as specified and directed.
Materials and labour Street light bracket, made out of 32 mm dia GI pipe (light grade) 1.5 m long bend to shape as required and welded and fixing in position including dismantling and taking down old unserviceable bracket complete all as specified and directed.
ENGINEERING AND CONSTRUCTION CO. (BID ID -3497351)
M/S SANJIB DEY SARKAR (BID ID -3487979)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
TENDERDOCUMENTS8538.pdf
Tender Documents • 1.72 MB
BOQ_827808.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid