SITC of LIFT

Amount

SITC of automatic lift (as per manufacturer design as per detailed specfication below conforming to IS) and putting into operation after final testing in the existing shaft complete with all accessories and repairing the damaged wall / floor etc. if any to complete as required.

Make : OTIS / KONE / SCHNIDLER

Type : 6 Passenger Service Lift

Load : 6 Passenger / 408 Kg.

Control : Microprocessor based ac variable Voltage & Variable frequency (VVVF)

Machine : Energy Efficient Gearless Machine : Without Machine Room.

Speed : 1.0 Mtr. / Sec.

Floor Served : G + 3

Landing : 4 lands ; All on same side.

Total Rise : 12.6 Mtr. (approx)

Operation : Microprocessor based simplex full collective with or without attendent.

Singnals : Digital Car postion indicator, car travels direction indicator in car and at all landing with call registration indicator. COP & LOP must have stainless steel face plate silver brushed with surface mounted button with braille. Button : All buttons on car & landing shall be luminous & encoded with braille on / off switch for Lift, fan, light, toggle switch or key switch for automatic / attendent mode of operation Display type : Monochorome / colour LCD Segmented LCD / Scroll. Operation Push Buttom for lift maintenance & service should be on top of the car.

Travelling Accuracy : ± 5mm (Micro Levelling Arrangement)

Car Inside : 1000 mm (W) x 1100 mm (D) x 2200 mm(H)

Car Entrance : Clear Opening 800 mm (W) x 2000 mm (H) protected with car door.

Car Encloser : Stainless steel sheet (20 SWG) with hair line finish with hand rail.

Car Celing & Lighting : Stainless Steel with hair line finish with LED Lighting & Fan.

Car Ventilation : Axial fan with anodised aluminium / SS grill.

Car Flooring : Decorative Granite Flooring (as per direction of EIC and according to department order.)

Car Door : Stainless steel centre opening (COPD / Telescopic Opening (TSPD) automatic door provided with V3F controlled door drive system.

Landing Door : Stainless Steel Centre Opening (COPD) / Telescopic Opening (TSPD) automatic door provided with V3F controlled door drive system with fire rating of 120 min.

Door Opening : Automatic Power operated door with full length photocell assembly curtain sensor.

PROTECTIVE DEVICES & OTHER ACCESSORIES :-

ARD : Automatic rescue device complete with dry maintenance free batteries as required for automatic evacuation to the nearest floor in case of power failure / single phasing / others.

Overload Protection : Fully loaded with overload protection. On overloading condition the lift car will not start with door remaining open and give audio alarm & display indication.

Emergency lighting in Car : Battery Operated emergency lighting in the lift car.

Itercom System : Battery operated InterCom System in Lift Car & Control Room.

Emergency Alarm : Battery Operated alarm bell system in Lift Car & Control Room.

Fireman Switch : Fireman switch placed at ground floor, algorithm of operation will be such that in case of fire incident with 'Fireman Switch ON' the lift will move to and fro according to operator's choice & door will open at the desired floor when door open switch is pressed by the operator.

Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the lift.

Car Parking at top floor at idle condition.

Main wire Rope / Belt : As per manufacturer's standard conforming to IS.

DIMENSION OF SHAFT & POWER SUPPLY :-

Available Shaft Dimension : 1625 mm (W) X 1550 mm (D)

Pit Depth : 1350mm (Bidder should visit the site)

Overhead : 4200mm (Bidder should visit the site)

Electric power supply : AC 415V, 3Phase, 50Hz terminated in machine room as per IS.

SCHINDLER INDIA PRIVATE LIMITED (BID ID -6154641)