8518 REPAIRS TO PLUMBING TILING SANITARY FITTINGS DOOR WINDOW AND CONNECTED B R WORKS AT A AND B WING OF DAD RESIDENTIAL COMPLEX UNDER AGE BR I OF GE SOUTH PUNE

Amount

M&L for preparation of old painted surfaces of walls by washing, rubbing down and stopping and applying a coat of Apex ultima weather proof paint, complete all as specified and directed.

S&F in repairs 20mm bore GI elbo with internal threaded, ISI marked, jointing as in to GI pipe line complete all as specified and directed.

S&F in repairs 15mm bore GI elbo with internal threaded, ISI marked, jointing as in to GI pipe line complete all as specified and directed.

S&F in repairs 20mm bore union socket both side internal threaded, ISI marked fixed to GI steel tubing with using necessary adhesive etc, complete all as specified and directed.

S & F in repairs 20mm bore gun metal gate valves (Class I), with iron wheel head, screwed both ends for iron pipe, ISI marked, complete all as specified and directed

S & F in repairs 15 mm bore two way bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs 15mm bore health faucet chromium plated with 1.20 m long flexible chord etc. complete all as specified and directed.

S&F in repairs brass chromium plated shower rose, 125mm size with swivel joints, including fixing to steel pipe or union of 15mm bore, complete all as specified and directed.

S&F 100 mm dia PTMT grating doom, having minium weight 25 grams, complete all as specified and directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms), complete all as specified and directed.

M&L for coloured Ceramic tiles 450 x 300 x 7 to 8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces including triangular fitteting in CM 1:4 ton top edge including demolition of old unserviceable tiles works of any type and removal of debries material outside defence land etc., complete all as specified and as directed.

M&L for Non skid ceramic colored tiles 7 to 8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer as in CM 1:6 including demolition of old unserviceable tiles works of any type and removal of debries material outside defence land etc. complete all as specified and as directed.

M & L for granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite laid over and including screed bed or bedding layer 15 mm thick in CM 1:6 including demolition of old unserviceable existing stone slabs / tiles of any type and removal of debries material outside defence land etc., complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20mm to 25 thick, laid over and including screed bed or bedding layer 15 mm thick in CM 1:6, laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc including demolition of old existing unserviceable stone slabs / tiles of any type and removal of debries material outside defence land etc. , complete all as specified and as directed.

Rounding to edges of stone slabs and polishing in edges, such as in steps,shelf cooking platform, and other similar situations, complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar 1:6 on brick / concrete surfaces finished even & smooth with a thin layer of sagol including taking down of old existing unserviceable plaster complete all as specified and as directed.

M&L for 5 mm thick rendering in cement mortar (1:3) on ceiling surfaces and finished even and smooth without using extra cement including taking down of old existing unserviceable plaster, complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including 2 mm thick wall care putty complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceilings and applying two coats of oil bound distemper over a coat primer complete all as specified and directed.

S&F PVC down take pipe of inner side threading 32 mm bore for WHB / SINK waste water, 75/90 cm long etc. complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane, including hacking out old broken glass if any (any thickness, quality & size), complete all as specified and directed.

S & F 15 mm GI tubing medium grade including with all fittings & fixtures, fixed to walls / ceiling or laid in floors including taking up or down old unserviceable existing pipe, complete all as specified & as directed.

S & F 20 mm GI tubing medium grade including with all fittings & fixtures, fixed to walls / ceiling or laid in floors including taking up or down old unserviceable existing pipe, complete all as specified & as directed.

Cutting chases, pinning in, concrete block walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed.

M&L for hasp & staple 100mm size, aluminium anodised, safety type, aluminium anodised, including bolt to hing plate and fixed with screws, complete all as specified and directed.

S & F in repairs vitreous china squatting Pan "Orissa" pattern of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and as directed.

S&F in repairs sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repairs wash hand basins, vitreous china of size 550mm X 400mm (flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of supply and fixing waste pipe etc. complete all as specified and as directed.

S & F in repairs 15 mm bore pillar taps, fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with or without lettered " HOT" or "COLD" with long screwed shanks and fly nuts, complete all as specified and as directed.

S & F in repairs 15 mm bore bib taps, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 32 mm bore waste fittings (suitable for WHB / Sink), brass chromium plated with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repairs 15 mm stop valves, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

All as per item No. 33 above but concealed type, long shank complete all as specified and as directed.

S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, including flush pipe 32 mm bore complete all as specified and as directed.

S&F PVC (SWR), 75mm dia outlet floor trap, plain with grating including jointing with solvent cement, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

M&L for machine cut kota stone slab as in flooring 20-25 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, grinding and mirror polishing, laid over and including 20mm thick screed bed in cement mortar 1:6 including demolition of old existing unserviceable floor finishes of any type and removal of debries material outside defence land etc. complete all as specified and as directed. Note:- The size of kota stone slab shall not be less than 550mmx550mm (cut size except the location where balanced).

M&L for machine cut kota stone slab as in riser / tread, skirting / dado and similar lacations, 20-25 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, grinding and mirror polishing, laid over and including 15mm thick rendering in cement mortar 1:4 and triangular filleting on top in CM 1:4 including demolition of old existing unserviceable finishes of any type and removal of debries material outside defence land etc. complete all as specified and as directed.

Supply and fixing in repairs rotational moulded polyethylene water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position, three layered including with brass tank nipple of suitable size & dia, 20 mm ball brass valve high pressure with rod & high density plastic ball including taking down of old unserviceable tank, complete all as specified and directed.

S & F transparent Glass 7.5 x 7.5 inch corner bathroom shelves with bracket (set of 2) complete all as specified and as directed. (Model- Joyo Cera Gls 132 or of equivalent make)

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long complete all as specified and as directed.

Taking down wooden door shutter and refixing in including resecuring or easing and adjusting in the same opening not exc 1.00 sqm each complete all as specified and as directed.

Taking down wooden door shutter and refixing in including resecuring or easing and adjusting in the same opening exc. 1.00 but n. exc. 2.00 sqm each complete all as specified and as directed.

S & F harrison curtain rails, powder coated with suitable size brackets & end tops suitable for 25mm bore (Medium weight) curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc and match with complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) branch piece, 75mm bore, single (Single Y) equal or unequal, complete all as specified & directed.

S&F PVC (SWR) branch piece, 110mm bore, single (Single Y) equal or unequal, complete all as specified & directed.

S&F in repairs soap dish chromium plated brass fixed width brass screws complete all as specified and as directed.

S & F in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling of old existing unserviceable pipe, complete all as specified and as directed.

All as per Ser. item No. 49 above but 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) bends / Tee with access door for 110mm bore complete all as specified and as directed.

S&F PVC (SWR) bends / Tee with acess door for 75mm bore complete all as specified and as directed.

Taking down angle iron / wooden chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sqm each but n. exc. 4 sqm each and removed to store complete all as specified and as directed.

S & F 30 mm thick IInd class hard wood glazed and skeleton shutters, devided into squres with plain, chamfered or rounded mitered and rebated sash bars any numbers, open rebated prepared to receive guaze, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc size of members of shutters in SSR Part- I, Section 8, Clause 8.24 (a) complete all as specified and as directed.

M & L for preparation of new or previously untreated surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to newly wood surfaces complete all as specified and as directed.

S & F stainless steel wirecloth 0.36 mm nominal dia of wire and avarage width of aperature 1.40 mm & fixed with stainless steel wire stapples complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain co lour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain colour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet banding, and joints to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S & F 100 mm long butt hinges medium weight , cold rolled Mild steel for door shutters complete all as specified and as directed.

S&F 150 mm aluminium anodized barrel tower bolts of extruded section for door shutters complete all as specified and as directed.

S & F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified and as directed.

S & F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

S & F in repairs sheet glass 4 mm thick plain or tinted, fixed to aluminium frame in partition / window (three track sliding) exc.0.50 sqm including removal and re-fixing of existing shutters in same opening etc. complete all as specified and directed. (Note:- The cost of beading / rubber packing etc shall be deemed to be included in the Unit quoted rate)

Taking down shutters of any description exc 1 sqm but not exc. 2 Sqm each & removed to store complete all as specified and as directed.

M&L for 18/19mm thick pre-laminated particle board both side decorative face, including providing second class hard wood 3mm thick or PVC teak face beading for edges of board alround as in CB / WR / Kitchen cabinet etc. including taking down of old unserviceable shutters any type complete all as specified and directed by Engr in Charge.

S&F continuous (piano) hinges, mild steel, bright finish, width of flaps (When open) 30mm, complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius, built in CM 1:6 complete, including demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan not exceeding 6m mean radius, built in CM 1:4 complete, including demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

S&F in repairs stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304 of standard size 30"x32"x8"/10" and of approved quality of finish all as spd and directed and of ISI mark complete all as specified and as directed.

S&F two legged aluminium floor door stopper with rubber shoe 140mm long complete all as specified and directed.

Taking down / cutting steel window shutters by means of gas cutter without disturbing of soffit / jambs / cills etc. of any description not exc. 1.5 sqm (without taking off guard bars) complete all as specified and as directed.

S&F three track sliding window with two or more shutter witth 4 mm thick tinted glass, one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

S&F ventiltors/ louvers with partially guaged shutter using 4 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc complete all as specified and as directed. (a) SP 20048 (b) Glazing clips 19352

S&F 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels with and including both sides face covered with decorative face veneer with lipping etc. complete all asspecified and as directed.

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and as directed.

M&L for providing cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) 75 mm thick as in plinth protection finishing even and fair on top using extra cement with 6mm wide joints throughout the thickness of plinth protection complete all as specified and as directed.

M & L for carrying out non destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles/cracks in floor / wall with and including second course injection of CORESEAL 135A/CORESEAL 135B all as per manufacturers instructions and as directed by Engr-in-Charge. (Note :- The rate is inclusive of replacement of any defective fittings/fixtures of any type/material elbows, bend, tee, reducer single 'Y', double 'Y' with cleaning eye and concealed piece of pipe below floor as well as between wall and bend.) (Makes for this item :- AQUATYTE, CREAT SEAL grouting compound of Ashwin Enterprises, GPSS (ground penetrating sealing system) of Saga polytech or similar brand as approved by Accepting Officer.)

S&F PVC 40 mm bore pipes suitable for WHB outlets including necessary bend, tee etc. as in waste water, laid under floor / on wall etc complete all as specified and directed

S&F 100 mm size brass handles, cast type, polished bright etc. complete all as specified and directed

S&F 8mm dia ball catches spring of steel, brass body and striking plate etc. complete all as specified and directed.

S&F 40mm dia Knob of brass body fixed nut, screws and washer etc. complete all as specified and directed

S&F mild steel 300 mm, ordinary rat tail pattern, spring including rollar and rollar plate , complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of flooring, finish the surfaces fair and even, complete all as specified and as directed.

M&L for coloured precast cement concrete interlocking tiles 60mm thick, M-35 grade of any shape and size, conforming to IS-15658-2006 glossy finish as in floor/pavement laid on and including 40mm thick stone dust cushioning, laid dry to the profile over rammed earth/murrum filling complete all as specified and directed

S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm with and including MS hold fast - 04 Nos., MS cold rolld 100mm size butt hinges- 06 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1 for embadding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed.

S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm with and including MS hold fast - 04 Nos., MS cold rolld 100mm size butt hinges- 03 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1 for embadding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed.

M & L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.72 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including demolition of old unserviceable tiles of any type and removal of debries material outside defence land etc. complete all as specified and directed.

Suma Construction

SARATH ENTERPRISES

REKHA ELECTRICALS

Emerald Construction

R k construction

Sunny Enterprises

M/S Abhishek Builders