SPECIAL REPAIR REPLACEMENT OF ROOF SHEET OF TD BILLET T 77 AND PROVN OF CERTAIN MINOR WORKS AT AF STATION GWALIOR

Amount

Demolition of PCC in ground floors and pavings not exc 15 cm thickness below or above ground level and removing the debris to a distance not exc 2.5 Km from the starting point. Complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exc 2.5 Km from the starting point complete all as specified and directed.

M & L for cement concrete type B1 1:2:4 (20mm graded stone aggregate ) on roof kerbs and like rounded or chamferred on edges etc, complete all as specified.

S&F in repair coloured powder coated Drapery Rod of Aluminium 25 mm inner dia with support of coloured powder coated aluminium decorative type design and pattern approved by GE including decorative brackets at both ends complete all as specified and directed.

M&L for 50 mm thick PCC, 1:2:4 Mix, Type B1 (Using 20 mm graded stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC (1:4:8) Type D2 (40 mm graded aggre-gate) as in foundations, filling and mass-concrete complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6), type C-2, using 40mm graded stone aggregate as in plinth protection, surface finished even & smooth without using extra cement, with and including joint filling complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block 60mm thickness, M-35 Grade with grey cement & pigment any shape and size confirming to IS 15658-2006 with and including and PCC (1:2:4) type B1 side of path/paver block (kerbs), complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.

Taking up or down 15mm bore steel tubing and connections, including seggregation serviceable pipes cleaning for re-fixing or removal unserviceable pipes from site complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including seggregation serviceable pipes cleaning for re-fixing or removal unserviceable pipes from site complete all as specified and directed.

S&F GI tubing 15 mm dia bore medium grade with and including all fittings ISI marked and fixed to wall, floor and ceiling etc complete all as specified and as directed.

S&F GI tubing 20 mm dia bore medium grade with and including all fittings ISI marked and fixed to wall, floor and ceiling etc complete all as specified and as directed.

M&L for premium quality non skid, coloured ceramic tiles 7-8 mm thick desined/digital & approved colour (square/rectangular) area of each tiles exc 0.06 but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of coloured tiles over & includind 15 mm thick screed bed or bedding layer in Cement Mortar (1:6) complete all as specified.

M & L for premium quality coluored Glazed ceramic tiles of size 450 x 300 x 7 mm thick designed/digital/ Printed of approved colour, as in vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, ver and including 10mm thick screed bed in cement mortar (1:3) complete all as specified.

Supply and fix in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and 'S' or 'P' traps (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 580mm x 450mm excluding taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & PTMT waste coupling OF 32mm dia complete all as specified and directed. Note : Rate quoted under this item deemed included fixing of taps, plug and chain and connecting up to supply pipes, wastes or traps etc.

S&F in repair of fancy type overhead shower rose with arm, 125 mm size, with or without swivel joint, Brass chromium plated screwed down of 15mm bore complete all as specified and directed.

S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S & F in repair Bib taps, 15 mm dia, cast copper alloy, fancy type, long body, chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S & F fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, 12 CM wide with chromium plated brackets, guard and railing, 60 CM long fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

S&F PVC grating of 100 mm dia doom type with waste hole fixed in position with white cement complete all as specified and directed.

S&F in repair 15 mm bore stop valves, fancy type, chromium plated, cast copper alloy, long shank and cup (concealed type) screwed down, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed.

S&F 5mm thick beveled edge best quality looking mirror of size 600x450 mm with 30 mm PVC beading all around the glass, mounted over 3mm thick PVC sheet or 4mm thick AC bldg board, complete all as specified and directed.

S&F chromium plated brass tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed.

M&L for precast RCC, 1:2:4 Mix, Type B1 (using 20mm graded stone aggregates) as in cover slab/ Chajjas, set in CM 1:4 including necessary fair finish formwork complete all as specified and directed.

M&L for mild steel TMT bars as in reinforcement, 10mm dia and over cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for cement concrete type B1 1:2:4 (20mm graded stone aggregate ) as in coping, concrete block for fixing rungs on wall etc including necessary form work complete all as specified.

Taking down old cement / lime plaster on brick or concrete surfaces etc including racking out joint, hacking for key screbbing down with water etc.complete all as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. and segregation serviceable bricks, keep them staking for re use complete all as directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc,complete all as specified.

M&L for Brickwork (except bricks), straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc,complete all as specified. Note: Serviceable bricks received from item No. 35 here in before shall be reused in work.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface on wall in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface on wall in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified.

M&L for preparing newly plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over and including one coat of primer and a thing layer of JK/ Birla wall care putty complete all as specified and directed.

M&L for preparing newly plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint (Ace paint from Asian Paints or other equivalent brand from Berger/ Shalimar Paints) over and including one coat of primer and a thing layer of JK/ Birla wall care putty complete all as specified and directed.

Dismantling old plain or corrugated Asbestos cement/ Steel sheeting in roof coverings etc and remove materials from site of work complete all as directed.

Dismantling of timber scantling (Unframed Work) 40 sqcm and over in section, in any position as in framed work complete all as specified and as directed.

Dismantling framed trusses not exc 10 M Span complete all as specified and directed.

M&L for mild steel work as in roof trusses (Framed), trussed purlins, crane gantries, rail and fastening and heavy bracket framing (Beam, Tee, Angle, Channel or flat sections) including distance pieces, cleats etc confirming to Fe-290 (Gde E-165) Quality A complete all as specified and directed.

M&L for Pre-painted galvalume alu. Zinc coating GI based corrugated steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in roof covering fixed using hot dip galvanized self drilling and self tapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces)

M&L for Pre-painted galvalume alu. Zinc coating GI based Plain steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in ridges of roof covering fixed using hot dip galvanized self drilling and self tapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces)

Supply and fixing of rubber beading 40mm strip in bottom of door complete all as specified and directed.

Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of area not exceeding 1.50 Sqm each including cutting holes for taking out hold fast or dismantling brick work & removing from site complete all as specified and directed.

Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of area exceeding 1.50 Sqm but not exceeding 4.0 Sqm each including cutting holes for taking out hold fast or dismantling brick work & removing from site complete all as specified and directed.

S&F second class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 35mm thick factory made plain framed, panelled shutters (two panel) of IInd class hard wood rail and styles with lock rail and panel of 9 mm BWP commercial ply. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified.

S&F 35mm thick factory made second class hard wood glazed and skeltron door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.20 (a).

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube fixed with 75mm long MS screws with PVC fasteners to wall all including repair of james of wall & finishes complete all as specified and directed .

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel’ having a PVC sheet strip’ of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the fame at site as per specification & drawing. complete all as specified and directed.

S&F butt hinge, medium weight, cold rolled and fixed of size 100 mm complete all as specified and directed.

S&F powder coated aluminium barrel tower bolts of extruded section of size 150mm complete all as specified and directed.

S&F powder coated aluminium handles cast type of size 150mm complete all as specified and directed.

S & F for 140mm door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed complete all as specified.

S&F 200mm mild steel helical door springs fixed by welding to steel frame or by screwing to wooden frame complete complete all as specified and directed.

S&F anodised aluminium sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of size 250mm complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples etc. in doors / window/ Ventilators, complete all as specified and directed.

M&L for PCC (1:3:6) type C0 (using 12.50mm graded stone aggregate) as in back filling of door frame/ hold fast block etc including necessary form work if required complete all as specified and directed.

M&L for mild steel work as hold fast and similar small article works etc confirming to Fe-290 (Gde E-165) Quality A complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over and including a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.complete all as specified

M&L for two coats of synthetic enamel paint over and including a coat of pink primer including preparation of new wood or wooden base surface over 10cm width or grith complete all as specified and directed.

Dismantling of wall and ceiling boards ( fibre, pulp insulation etc.) or insulation boards/ slabs/ blankets of any thickness, including cover fillets complete all as specified and directed.

S&F HPSC pre-prime non asbestos fiber cement building board (E-classic) decorative finish fixed to aluminum or MS galvanised snap grid frame work with hold down clips in ceiling complete all as specified.

S&F in repair suspended false ceiling grid system of size 600 x 600 mm with main runner of size 32 x 24 x 0.8 mm, cross tee of size 26 x 24x 0.80 mm and wall angle of size 22.2 x 22.2 x 0.65 mm in ceiling suspended @ 1.2m c/c both way with 1.60 mm dia GI wire fixed with steel dash fasterers or from purlin of roof with butterfly clips hold down etc, complete (main runner/ cross tee / wall angle of MS powder coated) as per manufacturere instruction complete all as specified.

Supplying, fabricating and fixing of aluminium powder coated (minimum thickness of powder coating shall be 50 micron) for door/ window/ ventilator frames, shutters, partitions etc including necessary jointing cleats, glazing clips, aluminium snap beading having minimum weight 100 gram per RM, rubber neoprane gasket, screws, dash fasteners, rawl plug etc complete all as specified and directed. Note: Only weight of aluminium section shall be measured for payment purpose.

S&F for aluminium grills of size exc 5mm x 7.5mm and aperture n. exc 80mm incl fixing with aluminium channel 1mm thick with stainless steel screw and tint match with existing complete all as specified.

M&L for complete removal of existing treatment of old surface of wall including cornices surfaces by rubbing/sanding and applying one coat of primer and thin layer of JK/ Birla white wall care putty to obtain the desired/ true surface of wall complete all as specified and directed.

M&L for two coats of oil emulsion distemper on newly prepared surface of walls complete all as specified and as directed. Note : Shade of paint will be decided by GE.

M&L for two coats of exterior emulsion wall paint (Ace paint from Asian paint or wall mast from Berger paint) on newly prepared surface of walls complete all as specified and as directed. Note : Shade of paint will be decided by GE.

S&F 4.0 mm thick sheet glass ordinary quality, for aluminium windows/ ventilators etc, in square not exc 0.50 Sqm each pane complete all as specified and directed.

M&L for Granite of 18mm to 20mm thick (of any type) work (table rubbed/moulding and polished) in steps, jambs, pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm screed bed in Cement Mortar 1:4 complete all as specified.

M&L for mirror polished machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed Note:- The size of kota stone slab not less than 550mmx550mm (cut size except the location where balanced.)

M&L for grinding existing kota stone flooring / skirting with stones of suitable sizes minimum three cutting including filling all the hungry joints with neat cement slurry mixed with pigment to match the shade of Kota Stone and washing down the prepared surfaces with water and finally polishing the surface with the entire satisfaction of GE complete all as specified and directed.

M&L for preparing newly plastered / unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Dismantling old wrought iron or mild steel work of any description not otherwise provideded for etc. and remove materials from site of work complete all as directed.

M&L for preparing old painted steel surfaces exceeding 10 CM width or girth and applying two coats of synthetic enamelled paint complete all as specified and directed.

Refixing old suspended false ceiling snap grid of any description (Aluminium or GI) after carrying out necessary minor repairs to damaged parts of snap grid and replacing the damaged parts of snap grid with new ones of the same description to match with the existing complete all as specified and directed. Note: The quoted rate are inclusive of providing new hold down clips and GI suspension wire.

Excavating in trenches n'exc 1.5 m width and n'exc 1.5 m in depth for foundation etc n'exc 10 sqm on plan and n'exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil comlete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removal of surplus spoil to a distance n'exc. 50 Mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

S&F rolled section for structural steel work as in main and cross beams, hip and jack rafters, purlin where connected to common rafters and running rails and guides for sliding crane, fixed with angle cleats or other connecting plates/ bolts, conforming to Fe-290(Gde-E-165) complete all as specified and as directed. Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete.

M&L for 25 mm thick PCC 1:2:4 mix, type B0 (using 12.50 mm graded stone agg) as in sub base of floor finishing the surface even and rough to receive tiles etc complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to grade Fe.290. complete all as specified.

S&F 1.00 mm thick PGI sheet, cut to size, hole punched and welded to Mild Steel frame work complete all as specified and directed.

M&L for hard core of broken boulders/stone of gauge n exc. 63 mm, deposited, spreading, leveling watering and well ramming to true surface in layers not exceeding 15 cm thick each layer complete all as specified and directed.

M&L for RCC, 1:1.5:3 Mix, Type A1 (using 20mm graded stone aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles, raft etc and mass concrete complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

S&F mild steel frame work as in door or gates of angle or other section with gusset plate, rails, braces etc complete drilled for fixing of steel sheeting or other covering) complete all as specified and as directed.

M&L 100 mm thick PCC (1:2:4) type B2 (40 mm graded stone agg) as in floor finished even and fair without using extra cement complete all as specified and directed.

M&L for providing PCC 1:2:4 Mix, Type B1 (using 20 mm graded stone aggregate) as in mass concrete for grouting post etc including necessary form work as required complete all as specified and directed.

S&F wire netting of galvanised steel wire, 1.40 mm dia and size of mesh 25 mm fixed with tinned tacks of stainless steel wire staples complete all as specified and directed.

S&F 40 mm bore galvanised steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling complete all as specified and as directed.

S&F copper pipes of size 15 mm bore fixed in wall/ floor or laid in trenches including fixing of all necessary fittings as required at site as per manufacturers instructions including making necessary connection to inlet/ outlet of oxygen cylinders complete all as specified and directed.

Taking down carefully existing unserviceable aluminum point wiring of any description & in any position with and including pvc/steel conduit all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings call bell, lamp holders etc and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as directed. NOTE: Old fittings/fixtures/accessories like switch, sockets, lamp holders, regulators etc found in serviceable condition shall be removed carefully for reuse in the work and shall be paid for separately under appropriate item of Schedule `A’.

Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, FR single core, PVC insulated & unsheathed cable, 1100 volts grade in and including surface PVC conduit (Medium grade) of suitable size not less then 20 mm dia all as directed with using new sunken type pressed steel box/terminal boxes of suitable size, 2mm thick duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings wiring accessories with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor FR single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed.

NOTE : (i) The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs and provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable GI screws and cup washers) (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A 'Make of Cable/wire:- : Havells /Finolex/Polycab, Make of PVC Conduit:-Finolex/Kilinga Make of Laminated Sheet:-Hylam/National

Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor cable FR, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduit (Medium grade) of suitable size not less then 20mm dia all as directed with using new sunken type pressed steel box/terminal boxes of suitable size, 2mm thick duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/junction boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor cable FR single core. PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed.

NOTE : (i) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing colour of surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs and provision of 8covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable GI screws and cup washers) (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of BOQ (Make of Cable/wire:- : Havells /Finolex/Polycab/Grandlay Make of PVC Conduit:-Finolex/Ess Ess Kay Engineering, Make of Laminated Sheet:-/Hylam/National)

All as per item No 104 hereinbefore but point wiring for 5 pin switch socket outlet combination, 5/6 Amps on independent board.

All as per item No 104 hereinbefore but point wiring for one 5 pin socket outlet, on same board .

All as per item No 104 hereinbefore but point wiring for one six pin socket outlet, 15/5 Amps (independent board) controlled by one switch with using 2.5 Sqmm (nominal area) stranded copper conductor.

M & L for switch flush type single pole one way 5 Amps, 240 volts, white ivory finish complete all as specified. (Make :- Anchor(Panta)/ Cona/ Leader)

S&F switch socket combination multi purpose, 5 Pin 6 amps, flush typeWith Indicator complete all as specified and directed.Make:-Cat part No 2216 of cona or equivalent of Leader/ Anchor(Panta).

S&F for switch socket combination multi purpose, 6 Pin 6/16 amps, flush typeWith Indicator complete all as specified and directed. Make:-Cat part No 2711 of cona or equivalent of Leader/ Anchor(Panta).

M&L for ceiling rose surface Bakelite three terminal, 18 x 50 mm complete all as specified. (Make :- Anchor(Panta) , Cona , Leader)

M&L for lamp holder insulated body with back plate for batten fitting complete all as specified. (Make :- Anchor(Panta) , Cona , Leader)

S&F for step type electronic fan regulator single phase ,230 volt, 100/120 watt . Complete all as specified. (Size of PT switch ) Make:-Cat part No 3211 of cona or equivalent of Leader/ Anchor(Panta).

Supply & Fix for decorative slim linear LED LED T5 AL Batten Tube 01x20 watt light with co extruded polycarbonate body, environmental frendly, energy efficient ready to use pack with all accessories and connecting the same to ceiling rose with using copper conductor 23/0.0076 flexible PVC sheathsd and fixing arrangement for fixing the light fitting to wall/ roof surface complete all as specified. (Make-Havell's Cat Part No LUMILINEBS20WLED865SPCWH/Surya Cat No -SLEBT -20 /CG cat No -LCTL 18 CDL)

S&F decorative oval bulk head LED fitting 10 watt energy saving new generation IP 65 luminatre with opel diffuser complete with lamp all as specified. (Make-Havell's Cat Part No-HEXAFT10WLED857SSYMBOPC/Surya cat Part No -SLE BH-10/ CG Cart Part No -LBHP-10 CDL)

Dismantling & Taking out MCB DBs any size , any type and capacity and remove materials from site of works. Complete all as directed.

S&F for sheet metal enclosure Double door for DB’s 8 way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires. Complete all as specified. (Make;ABB,Schneider,Legrand)

S&F for sheet metal enclosure Double door for DB’s 4 way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires. Complete all as specified. (Make;ABB,Schneider,Legrand)

S&F for MCB single pole 6 to 32 Amps, "C" Curve ,240 Volts complete all as specified (Make:Legrand/ABB/Schneider )

S&F for MCB Single pole and neutral 40 to 63 Amps 10 KA, 'C' series, 240 Volts complete all as specified. (Make:Legrand/ABB/Schneider )

M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable FR of size 10.0 Sqmm of voltage rating upto and including 1100 Volts grade in and including concealed PVC conduit, med grade of size not less then 25 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 10 Sqmm as earth continuity conductor cable FR all as specified and directed including taking down old submain wiring with any type of conduit. Complete all as specified. (NOTE : Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.) incl taking out old sub main wiring with any type of conduit.

M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable FR of size 4.0 Sqmm of voltage rating upto and including 1100 Volts grade in and including concealed PVC conduit, med grade of size not less then 20 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 4 Sqmm as earth continuity conductor cable FR all as specified and directed including taking down old submain wiring with any type of conduit. Complete all as specified. (NOTE : Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.) incl taking out old sub main wiring with any type of conduit.

M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable FR of size 6.0 Sqmm of voltage rating upto and including 1100 Volts grade in and including concealed PVC conduit, med grade of size not less then 25 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 6 Sqmm as earth continuity conductor cable FR all as specified and directed including taking down old submain wiring with any type of conduit. Complete all as specified. (NOTE : Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.) incl taking out old sub main wiring with any type of conduit.

M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB of capacity 20 Amps, 240 Volts complete fixed on wall by provisioning of suitable sizes of MS strips, nuts, bolts and washers all as specified. (Make:ABB/Schneider/Legrand)

Taking down carefully ceiling fan/exhaust fan including electric connection complete from site and re-fixing the same in existing position after civil work with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Taking down carefully Water heater (Geyser,s) any capicity any size and disconnecting all electric conection including hot & cold PVC water connection and refixing the same and connecting electric & water connection after the civil work. Complete all as directed.

M&L for earthing complete with MS Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level including necessary excavation, earth work ,charcoal, salt etc and connected to GI earthing lead wire 4 mm dia by means of GI bolt nuts check nuts washers etc and 20 mm dia GI light grade watering pipe with funnel, wire mesh etc including PCC (1:3:6) type C-1 using 20 mm graded stone aggregate earth pit with 40x40x6 mm mild steel angle iron frame, RCC cover (1:2:4) type B-0, 50 mm thick reinforced with 8 mm dia round bar @100 mm centre to centre both ways with mild steel handle 12 mm dia, plastering 12 mm thick in cement mortar (1:6) internally and upto 150 mm below ground level externally, and GI earth lead wire 4 mm dia and 15 mm dia GI protection pipe medium grade from earth plate to test point upto 7.5m length all as shown in electrical plate No 3 of SSR Part -I 2009 and connected to earth test point including testing complete all as specified & directed. Note: Earth strip and protection pipe upto and including 7.5m deemed included in unit rate quoted by the contractor.

S& F Street light fittings 1x15watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP65 roadway luminaire with high power LED as light source with acrylic cover suitable for pole dia O 40mm(Max) with complete (40 mm GI pipe light grade ),clamp,nut-bolt and washer. Complete all as specified. ( Make : Havells Cat part No - ENDURAPEARLSL15WLED757SASYTOPC /Surya Cat Part No -SLEUL 15W IP 66LXN/CG cart part No -LSTS-15CDL.)

S&F in replacement 36W LED recess softline luminaire suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extruded diffuser giving glare free light and good aesthetic appeal. Fixture size 595x595x70mm complete with LED tube and all accessories specified. (Make : Havells cat part No PLUTONEO2X2PLR34WLED840S/Surya Cat No- SLEFP36R 22/ CG Cat Part No -LCTLSN36- CDL.)

S& F Street light fittings 1x35watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP65 roadway luminaire with high power LED as light source with acrylic cover suitable for pole dia O 40mm(Max) with complete (40 mm GI pipe light grade ),clamp,nut-bolt and washer. Complete all as specified. ( Make : Havells/ Surya/ CG)

S&F for sheet metal enclosure Double door for DB’s 4 way, TPN, 415 volts with 200 Amps rated bus bar for complete fixed properly on in MS Strip and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires. Complete all as specified. (Make;ABB,Schneider,Legrand)

S&F for MCB Tripple pole and neutral 100 Amps 10 KA, 'C' series, 415 Volts complete all as specified. (Make:Legrand/ABB/Schneider )

S&F/Laying, connecting and testing of LT cable XLPE insulated screened PVC badded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade as per IS 7098 with stranded aluminium conductor of size 25 Sqmm, 4 Core complete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed. Note : Punned thickness shall be measured and paid.

Supply & Laying sub class `B’ bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed.

S&F ceiling fan of 1200mm sweep and connecting up including provion of three core flexible cable of size 1.5 Sqmm copper wire from ceiling rose/connector to fan of length not less than 0.5 mtr. complete all as specified and directed. Make: Havells/ Bajaj/ Crompton/Orient

NOTE:- Site clearance of materials- All demolished material obtained from dismantling/demolition items shall be deposited at place shown by Engr-in-charge properly spread and levelled and site to be cleaned to the entire satisfaction of Engr-in-charge otherwise panel recovery to a sum of Rs. 10000.00 be deducted from dues without any prior intimation.

M/S NIRMAL SINGH DHANJAL

M/s Jai Durga Construction

SHRI RAM CONSTRUCTION

M/S YOGANSH CONSTRUCTION CO.