Construction of new botany LAB (First Floor), internal approach road (paver block) and development of playground at Sishuanata Mahavidyalay in the district of Khordha for the year of 2025-2026 .

CIVIL WORK Dismantling & removing 2.5 cm thick grading concrete from roof slab cleaning the surface lowering & removing debris with in 50. m Lead.

Dismanteling & removing RCC columns, beams, slab, staircase landing, lintels including stacking the useful materials for reuse and removing the debris with in 50. m Lead. (per 1 Cum.)

Removing old lime or cement plaster from walls including raking out joints 12 mm deep & removing the debris with in 50. m Lead.

Dismantling brick or stone masonry in lime or cement mortar above 3. m height including stacking the useful materials for reuse and removing the debris with in 50. m Lead

Dismantling & removing doors, windows, & ventilator including removal of frame, hinges, fastening & stacking the same for reuse and removing the debris with in 50. m Lead.

Provoding lifting ,hosting and laying reinforced cement concrete of M-20 grade to the following member or in places as shown in the drawing for allfloor with 20mm and down graded size black hard crusher broken granite chips of approved quality from approved quarry incl. mixing and vibro compacting to proper shape and size ,level and plumb and finishing the exposed surface smooth (if required by grouting /providing plaster with cement mortar 1:4 wherever necessary without any extra cost )scaffolding ,including watering and curing for the required periode incl. providing strong rigid ,levelled and pumpbed centring and shuttering to required shape and size ,floors with wooden or steel centring materials ,with all necessary bracing and ties and supports with level centring covered with bituminous paper with provision of necessary holes and pockets for electrical conduits ,pipes ,PH,pipes ,for hooks or boxes ,switchboard and insert plates clamps and extension bars etc. incl. dismantling the same after the required interval from the date of casting ,incl. cost of all materials ,labour ,conveyance ,loading and unloading taxes cess ,royalty ,scaffolding ,watering ,curing ,sundries tols and plants etc. as per direction of the engineer -in -charges but excluing cost of mmaterilas and labour reinforcement .a) COLUMN IN SUPERSTRUCTURE (First Floor)

b) COLUMN IN SUPERSTRUCTURE (Terrace Floor)

c) LINTEL (First Floor)

d) CHAJJA (First Floor)

e) ROOF BEAM (First Floor)

f) ROOF BEAM (Terrace Floor)

g) ROOF SLAB (First Floor)

h) ROOF SLAB (Terrace Floor)

i) STAIRCASE (First Floor)

Fly ash brick masonary in cement mortar (1:6) in super structure using fly ash brick of Size (25X12X8 cm) having a crushing strength of not less than 75kg /cm2 incl.splays cutting circular moulding chmfering and corbelling watering and curing etc. complete incl.cost and conceyance of all materials and labour with T&P required for the work with all taxes and royalties etc complete in all respect or as directed by the engineer -in -charges .having a crushing having a crushing strength not less than 50kg/sq including splays cutting ,circular moulding ,Chmfering and Corbelling Watering and curing etc. complete including cost and ,conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc.complete in all as per the respect or as directed by the Engineer -in -charges. First floor

Terrace Floor

Supplying,cutting ,straightening coiled or bent up M S Rod or of steel of primary steel products such as SAIL/Tiscon /RINL (grade Fe- 500 D) etc bending, binding, cranking, hooking, welding or jointing if necessary & tying the grills and placing in position as required for the RCC work & for providing fan hooks hosting lowering ,& laying steels including cost conveyance ,taxes & royalties of all materials and binding wires of 18 to 20 gauge & labour required for the work for bending ,binding, and tying the grills in all floors with labour cess etc (payment will be made on standard weight of BIS for MS Rod or steel only)etc complete as per specifiaction & direction of Engineer in charges. First floor

Terrace Floor

Providing 6mm thick cement plaster (1:4) ( 1 cement : 4 sand) to R.C.C surface including close & deep chipping and cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing as shown in the drawing including cost of all materials , labour ,conveyance ,loading and unloading , taxes, cess, royalities ,scaffolding, watering ,curring, sundries ,tools and plans etc complete as per direction of E.I.C. First floor

Terrace Floor

Providing 12 mm thick cement plaster (1:6) ( 1 cement : 6 sand) to outside plastered surface/ plumped surface of masonary ,racking out joints , cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing as shown in the drawing including cost of all materials , labour ,conveyance ,loading and unloading , taxes, cess, royalities ,scaffolding, watering ,curring, sundries ,tools and plans etc complete as per direction of E.I.C. First floor

Terrace Floor

Providing 16 mm thick cement plaster (1:6) ( 1 cement : 6 sand) to rough surface of masonary ,racking out joints , cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing as shown in the drawing including cost of all materials , labour ,conveyance ,loading and unloading , taxes, cess, royalities ,scaffolding, watering ,curring, sundries ,tools and plans etc complete as per direction of E.I.C. First floor

Terrace Floor

Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. First floor

Terrace Floor

Painting 1 coat with approved primer to wall (per one Sq. Mtr.) (Data per 9.30 Sqm.) including cost of materials &Labour etc. First floor

Terrace Floor

Wall painting TWOcoats with plastic emulsion paint of approved shade on new work to give an even shade including cost of brushes and putty including cost of paint. First floor

Terrace Floor

Wall painting 2 coats with weather coat cement paint of approved shade on outer wall surface over a coat of water bound wall cement primer to give an even shade including cost of brushes and putty including cost of paint scrapping, cleaning rubbing, scaffolding including all costs of labour etc. complete as per direction of E.I.C. First floor

Terrace Floor

25 mm Thick Grading Concrete in C.C.(1:2:2) using 6 mm H.G. chips. (Per Sq.M.) First floor

Terrace Floor

Supplying windows with M.S.Grill made out of MS angle frame , MS flat, sheet of approved section & design electrically welded properly 2with all necessary locking arrangement including cost & conveyance of all materials, labours charges,carriage of materils to the site etc complete. First floor

Terrace Floor

Painting with two coats of enamel paint of approved quality and shade over surfaces as specified below ( steel surface) to give an even shade with 2 coats of approved quality over one coat of steel primer including costs of all materials, labour , conveyance ,taxes, cess , royalities , scaffolding ,watering ,tools and plan etc complete as per direction of E.I.C. First floor

Terrace Floor

Supplying, fitting and fixing vitrifed tile in floors of size 600mm x 600mm of approved make confirming to IS 13755 laid on 20 mm thick cement mortar (1:4) (1 cement:4 course sand) and filling joints with white cement of approved qualiy including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-Charge.

Supplying, fitting and fixing vitrifed tile in dados of size 600mm x 600mm of approved make confirming to IS 13755 laid on 20 mm thick cement mortar (1:3) (1 cement:3 course sand) and filling joints with white cement of approved qualiy including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-Charge. First floor

Terrace Floor

Supplying, fitting and fixing vitrified industrial floor tile 30x30cm premium grade 8 to 10 mm thick in floors of approved make confirming to IS : 4457 laid on 20mm thick C.M (1:4) & filling joints with white cement of approved quality including cost of all materials, takes labour T&P etc required for the work. First floor

Terrace Floor

Supplying, fittin and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materilas, labour, T&P etc. required for the complete in all respect.

Sliding Window of Alluminium sec 9778 as window frame,sec no 4095,4096,and 9777,3994 as shutter frame with 5mm thick black glass as panel etc. complete.

EI WORK Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-L&T/ Anchor/ Havells/ V-Guard/ Great White/ HPL or equivalent). Group-A -L.P- 15 F.P- C.B.P-

Group-B L.P- 28 F.P- 20 C.B.P-

Group-C L.P- 22 F.P- 4 C.B.P- 4

Supply and fixing of 6Amp plug with 6Amp switch on existing board. (Modular type)(Make-Great white/ Legrand / ABB/ Roma/ Havells/ HPL/ Cona or equivalent).

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp switch and socket of Modular type including all connection. (Make-Great white/ Legrand / ABB/ Roma/ Havells/ HPL/ Cona or equivalent).

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches including all connection. (Make-Great white/ Legrand / ABB/ Roma/ Havells/ HPL/ Cona or equivalent).

Supply and fixing of Electronics step type Modular fan regulator. (Make-Great white/ Legrand / ABB/ Roma/ Havells/ HPL/ Cona or equivalent).

S/F of Multipurpose board consisting 2nos. 6Amp plug and switch with all connections. (Modular type) (Make-Great white/ Legrand / ABB/ Roma/ Havells/ HPL/ Cona or equivalent).

Recessed extra lead sub main wiring in 2 X 1.5sq.mm + 1 X 1.5sq.mm PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL or equivalent).

Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL or equivalent). 2 X 2.5 sq.mm +1 X 1.5 sq.mm -do-

2 X 4 sq.mm +1 X 1.5 sq.mm -do-

2 X 6 sq.mm +1 X 2.5 sq.mm in 25mm dia

Supply and fixing of superior type Ding Dong call bell / buzzer of ISI marked, conforming to IS-2268/ 1994 (Make-Cona/ Anchor or equivalent). Ding dong call bell/ Buzzer with 4" x 6" MS board and cover.

S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/ 1987 in place of ceiling rose .

Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required as per the direction of Engineer-in-charge. Standard earthing as per Govt. specification

Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (Make-HPL/ Havells/ Legrand / L&T/ C&S or equivalent). 8way, Double door

Supply and fixing of 0.5Amp to 32A rating 240 V "C" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand / L&T/ ABB or equivalent). 6Amp rating to 32Amp (SP)MCB

Supply and Fixing of following rating double pole 240 V MCB of "C" series in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. (Make-HPL/ Havells/ Legrand / L&T/ ABB or equivalent). 40Amp DP MCB

Supply and Fixing of 18/ 20 watt recess LED cicular light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton or equivalent). as per the direction of Engineer-in-charge.

Supply and Fixing of 60 watt LED street light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton or equivalent). as per the direction of Engineer-in-charge.

Supply and Fixing of 18/ 20 watt LED Tube light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton or equivalent). as per the direction of Engineer-in-charge.

Supply and fixing 10 watt LED BH fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton / Surya/ Jaquar or equivalent).

Supply and fixing of following fan. A.C Ceiling fan 48" size. (Make-Polycab -Vital / Crompton -Jura/ Havells-Velocity or equivalent). as per the direction of Engineer-in-charge.

Exhaust fan 12" size with making hole of required size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton or equivalent). as per the direction of Engineer-in-charge.

Wall mounted fan 16" size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton/ Polycab or equivalent). as per the direction of Engineer-in-charge.

Supply of PVC armored cables ISI marked.(Make- Glowstar/ Polycab/ Nicco/KEas per letter No.309 19.01.2011 of SEEC (R&B) Odisha 10sq.mm 4core

Cable laying on wall surface with steel shaddle up to 25sqmm (Vertically)

Supply and making end termination with brass compression gland and aluminium logs for following size of PVC insulated and PVC sheathed / XLPE aluminium cable of 1.1kv grade (without cost of cable ) as required. 4 X 10sqmm

SITC of 63Amp MCCB floor Panel having provision of :- Incomming : 63Amp MCCB - 1 No. Out going : 63Amp TPN MCB -2 Nos, Ammeter, Volt meter etc

Supply and fixing of Modular switch, Socket, T.V Socket and Telephone socket etc. (Make-Great white/ Legrand / ABB/ Roma/ Havells/ HPL/ Cona or equivalent). 32Amp Modular DP switch

Call bell push Modular type

S/F of multipurpose board Modular 6A 3nos. Switch and 3nos. Socket and 1no. Switch and socket 15A on Modular board and cover. (Make-Great white/ Legrand / ABB/ Roma/ Havells/ HPL/ Cona or equivalent).

Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existing surface/ recessed/ STEEL / PVC conduit as required. 1 X 1.5sqmm

P.H WORKS Supplying all materials, labour, T&P and Providing and fixing Chlorinated Polyvinyl Chloride (CPVC/UPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge .In 1st. floor = 20mm dia C-PVC pipes

25mm dia C-PVC pipes

25mm dia UPVC ASTM-D pipes

32mm dia UPVC ASTM-D pipes

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. In 1st. Floor - 250mm thick wall

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge. 250mm to 375mm thick wall.

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.In 1st. Floor

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. (Plaza/Amber/Aquatic/Somany/Cera/Hydro).15mm dia CP Pillar cock(Plaza/Amber/Aquatic)

15mm dia CP Angle stop cock(Plaza/Amber/Aquatic)

15mm dia CP Two way Bib cock(Plaza/Amber/Aquatic)

15mm dia CP Health Faucet (Plaza/Amber/Aquatic)

25mm CPVC Ball Valve

32mm CPVC Ball Valve

15mm dia CP Flange

15mm dia CP Extension Piece

125mm dia CP Gratting

Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral or P trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge. E.W.C. S trap plain (Parryware/Hindware/Neycer)

Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan / Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal all complete as per specification and direction of the Engineer in charge.580mmx440mm size Orissa pan (Parryware/Hindware/Neycer)

Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. 10 litres capacity PVC LL cistern (Parryware/Hindware/Neycer)

Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge.Urinal FB 61x41x38 (Hindware) Cat No-60002

15mm dia urinal spreader

32mm dia CP dome waste

Supplying all materials, labour, T&P and fixing of wash hand basins with pedestal complete recessed at the back for the reception of pipes and fittings with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge.550mmx400mm size Wash hand basin with Porcelain Pedestal (Parryware/Hindware/Neycer)

Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 3.18m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. 2000 Ltr PVC water storage tank (3 Layer White)-on 2nd. Floor

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge. (Supreme/Ashirvad/Oriplast).110mm dia U-PVC SWR pipes(Supreme/Ashirvad/Oriplast)

110mm U-PVC door Tee

110mm U-PVC door bend

110mm U-PVC Plain Tee

110mm U-PVC plain bend

110mm dia U-PVC 'P' trap

110mm dia U-PVC cowl

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge. 600mmx450mm size B.E mirror

Supplying all materials, labour, T&P and fixing standard size glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 600mmx125mm glass shelf with CP/NP guard rails

Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. CP Towel Ring Round

25mm x 600mm long CP towel rail

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. CP Soap Holder

Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Cooler-cum-Purifier of size (700x430x460mm ht) with water cooling capacity of 40 PPH with contineously flow with one faucet having option for cold water and normal water etc.with internal water supply connection complete as per direction of the Engineer-in-charge.(Aqua guard) Cooler-cum-Purifier

Supplying all materials, labour T&P and fitting and fixing of Stainless steel stand for Aquaguard cooler-cum-purifier of size (700x430x460mm ht) with water cooling capacity of 40 PPH etc. all complete as per specification and direction of the Engineer-in-charge.Stainless steel for Aquaguard stand

Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.2x0.75x2.10 =

Factory made Solid WPC door frame of size 95mmx55mm fabricated. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge . 2x4.95 =

Supplying all materials, labour, T&P and providing Ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete. Size 30cmx30cm (Kajaria / Somany / Johnson) to be pre-approved by the Engineer in charge. In 1st. Floor.1x3.90x1.80 =

Supplying all materials, labour, T&P and fixing Porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete. Size 45cmx30cm (Kajaria / Somany / Johnson) plain/printed to be pre-approved by the Engineer in charge. In 1st. Floor.2x5.70x2.13 =

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In 1st. Floor = Measurement same as above dado tiles

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chipsincluding watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In 1st. Floor = 7.02x0.10 =

Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:1.5:3) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, fly ash bricks in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI/P-trap gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Gully trap chamber Inside size 250mmx250mm

Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.Inspection chamber Inside size 760mmx760mmx460mm

RCPC Cover (18" round)

Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.RCC rings soakway pit 1.22m dia x 2.10m deep

Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class 3(0.60mpa) including jointing with supply of approved solvent cement by non heat application method/as per manufacturers specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C 1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia upvc pipe alround concrete

160mm dia u-pvc pipe alround concrete

Construction of 30 users RCC Septic tank-1no.Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.1x4.10mx1.90 x1.50m=

- do - with addl. Depth of 1.5 m

Excavation of foundation in laterite rock or any hard rock (other than granite or disintegrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.50 mtr. in depth and depositing the soil within initial lead of 50 mtr. and as per specification approved by the Department.1x4.10x1.9x0.70=

Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge.In ground floor = 1x4.10mx1.90x0.15m=

Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.In ground floor = 1x4.10mx1.90x0.15m=

Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge Roof Slab

For RCC wall

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor

Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and fitting and fixing S.W.Tee of size 160mx160mx160m as per P.H.D.specification and direction of the E.I.C.

Supplying all materials, labour, T&P and constructing vent base as per P.H.D specification etc all complete.

Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge.110mm diameter U-PVC SWR pipe

110mm dia U-PVC Plain shoe bend

110mm dia U-PVC Cowl

Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge1 x2 x(4.10+1.60) x 0.15 x 2.00

Please Enable Macros to View BoQ information