Electrification of under construction OPD room for SCI and providing power supply to the HVAC system for the same at SKIMS Soura

Amount

Providing, fixing of fresh lighting point (5-6 amp) exposed,using double locked PVC channel 25x1.6 mm thick or PVC conduit 1" dia 1.5 mm thick with accessories to be fixed on the surface of the wall with rowel plugs, saddles, screws, using multi-strand 3 x1.5 mm sq. pvc insulated FRLS copper wire (P+N+E) complete with P/F of switch 5/6 amps F/T to be fitted on 3mm Bakelite sheet suitable size, M.S/Wooden box, rowel plugs & screws etc. complete Point.

Providing, fixing of fresh lighting point (5-6 amp) exposed,using PVC conduit 1" dia 2mm thick with accessories to be fixed on the surface of the wall with rowel plugs, saddles, screws, using multi-strand 3 x1.5 mm sq. pvc insulated FRLS copper wire (P+N+E) complete with P/F of switch 5/6 amps F/T to be fitted on 3mm Bakelite sheet suitable size, M.S/Wooden box, rowel plugs & screws etc. complete Point.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Socket 15 Amp 6 Pin

Socket 5 Amp 3/5 Pin

USB Charger 2 Module

Switch 15 Amp

Bakalite Plate 3mm Thick

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

150 mm X 150 mm X 60 mm deep

75 mm X 75 mm X 60 mm deep

150 mm X 75 mm X 60 mm deep

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular Switches in recess etc. as required.

12 Module (200mmX150mm)

2 Module (75mmX75mm)

SITC of 2'x2' 36W LED light fixture suitbale for ceiling recessed applications. The fixture has a power consumption of 36W and producing a system lumen output of minimum 3600 lumen. The fixture is designed for 50, 000 hrs of operational life Housing made of Metallic CRCA powder coated body with sheet thickness of 0 .7mm. Withstands 440Volt fast transit & Surge Protection 2KV. Luminous efficieny 100lm/ W, CRI> 80. The fixture has an operating voltage range 220-240V AC 50 Hz ,withstand 300Volt input for continuous operation & driver designed to withstand casing temp. 85 degree C.

SITC of Led 4feet long Batten 6000/6500k Light having extruded aluminum heat sink with anti-glare diffuser with energy eficient electronic driver CRI greater or equal to 80 with minimum system lumens 2000 and max wattage 20, IP 20, Surge protection 2kv or more including connection with multistrand copper conductor 3 core cable etc as reqd at site with burning hours greater than 50000 Hours

SITC of Led 2feet long batten 6000/6500k Light having extruded aluminium heat sink with anti-glare diffuser with energy efficient electronic driver CRI greater than 80 with minimum sytem lumens 1000 and maximum wattage 15 IP 20, Surge protection 2kv or more including connection with multistrand copper conductor 3 core cable etc as reqd at site with burning hours greater than 50000 Hours

Circuit wire to be laid / Replacement of damaged wire as per site requirements using multi strand pvc insulated FRlS copper wire (excluding the cost of conduit)

a) 3 x 1.5 mm2 multi strand pvc insulated copper.

b) 3 x 2.5 mm2 multi strand pvc insulated copper.

c) 3 x 4 mm 2 multi strand pvc insulated copper.

d) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Providing and Fixing of 25mm medium class PVC conduit 2mm thick along with accessories like with rowel plugs, screws, sadlles, bends etc complete as required at site . (in surface manner)

Supply and Installation of following Fans Heavy Duty Copper Wound

Supply installation testing and commissioning of following sizes of plastic body exhaust fans shutter type with Heavy duty motor Rated speed = 1400 RPM . RAte voltage -220 to 240 Volts . A) 250mm

Supply, Installation, Testing and Commissioning of 1200 mm sweep, Ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019),THD less than 10% and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulationresistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing following rating, 240/415 volts, “C”curve,10KA miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) MCB 32 Amp D.P

d) MCB TPN 63 Amp

Providing and fixing 250A 36kA Four pole MCCB adjustable type with ICU=100% ICS with thermomagnetic release in cubicle panel board, making connections, etc. as required.

P/f of Spreader links for 250A MCCB as mentioned above

Providing and fixing four pole MCCB 63 A having 30 KA B/capacity with Box, making connections, etc. as required. (Adjustable range from 0.7 to1)

P/f of Spreader links for 63A MCCB as mentioned above

Providing and laying of spans of 3 ½ core XLPE Al. cable Armored of various sizes as mentioned below 1.1KV confirming to IS 7098 part II

a) 120 mm sq. 3 ½ core

b) 70 mm sq. 3 ½ core

Supplying and making end termination with and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 120 sq. mm (45mm)

3½ X 70 sq. mm (35mm)

Providing and fixing of M.S. Angle 40 x40x 5mm Hangers for Cable Hanging 2.75 kg/hanger

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. 8 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

SITC of Mobile charging Station DBs Specification- mobile charging unit made of MS sheet CRCA 1.2mm thickness, IP 20 protection, 10 tank powder coting process with minimum 4 nos charging socket and 2 nos USB 1module controling 6A MCBs for every charging point , including suitable curved mobile holding tray of size 250 x 150mm and 4nos mobile holding pocket with fixing arrangements and required stickers and logo pasted.

M/S PEARL ENTERPRISES

K.J. Enterprises