PROVN OF SEPTIC TANK SOAKAGE PIT FOR GUARD POST NO 24 TO 30 AT JASAI MIL STN PROVN OF DESERT COOLER SOLAR WATER HEATER GEYSERS WITH ALLIED FACILITIES FOR CERTAIN UNITS AT JAILPA MIL STN AND OTHER SANCTION WORK UNDER GE A BARMER

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/in hard rock for foundation trenches or drains (not exceeding 1.5 m in width or 10 Sqm on plan),including dressing of sides and ramming of bottoms,lift upto 1.5m,including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m complete all as specified and as directed

M & L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in foundation of manholes, mass concrete etc. complete all as specified and directed.

M & L for Providing precast cement concrete type C1 1:3:6 (using 20mm graded stone aggregate) solid building blocks or slabs exc 10cm width (with plain or interlocking joints as directed) setting in Cement Mortar 1:6 in walls complete all as specified and directed.

M & L for PCC 1:2:4 type B0 (using 40mm graded aggregate) as in benching of surface channels/manholes including fair finishes of surfaces chamfering, throating and weathering and necessary form work complete as specified and directed.

M & L for rendering 15mm thick in cement mortar 1:3 on fair faces of brick or concrete surfaces and including mixing water proofing compound as per manufactureres instructions complete all as specified and directed. Note :- Water proofing compound shall be measured and paid for seperately under appropriate item of Sch "A' as supply only. complete all as specified and directed.

Supply only liquid water proofing compound (ISI Mark) complete all as specified and directed.

M & L for PCC 1:2:4 type B-0 12.5mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

M & L for mild steel TMT bar 10 mm dia and over as in reinforcement cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M & L for precast cement concrete manholes covers in RCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) with duly engraved "MES" marking and placing in position and set in CM 1:4 complete all as specified and directed.

Supplying, fixing, jointing and testing reinforced concrete drain pipes 150 mm bore, class NP3, laid and jointed with collar in C M 1:1 complete all as specified and directed.

M & L for concrete bed to drain pipes in PCC 1:3:6 type D-2 (using 40 mm graded stone aggregates) including packing under and hauching against the side of the pipes after they are laid tested for pipes of 150 mm bore dia complete all as specified and directed.

Returning, filling in the any type of soil including spreading, levelling. Watering and well ramming in layers not exceeding 25cm thick each layer complete all as specified and directed.

Removing the excavated soil to a distance not exceeding 50 metres away depositing where directed at a level not exceeding 1.50 metres above the starting point complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge

M&L for Soakage Pit/wells, excavation in Soft loose Soil/Hard/Dense Soil/Disintegrated/Hard Rock (any type of soil/rock), Fly ash solid brick masonry in CM (1:4) over coarse sand filling, Fly ash brick masonry, in CM (1:4) for Chamber and pedastal, RCC cover slab in M-25, Filling with broken Stone/boulder, 10mm thick plastering of Slab top, soak pit sides upto GL and pedastal in CM (1:4), removal of excavated material distance as specified by Engineer-in-charge complete of size 2.50 M dia X 2.40M deep (effective depth). (TD Drg No. CEJZ/2004/TD/S-17 Sheet 3/4.)

M&L for Septic tank, excavation in Hard/Dense Soil/Disintegrated Rock/Hard Rock (any type of soil/rock), foundation in PCC Type B2, (1:2:4) over 100mm thick hardcore compacted, Fly Ash Brick work in CM (1:4), 12mm thick internal plastering in CM (1:3), RCC M-25 Slab & 75mm thick RCC precast manhole cover having 8mm dia bars 0.15 C/C, RFR and removal of excavated material distance as specified by Engineer-in-charge, etc, complete for 10 to 30 users. (TD Drg No. CEJZ/TD/30 Sht No. 1/3, 2/3 & 3/3.)

M&L For construction of septic tank 10 users as per TD No CEJZ/TD/31 Sheet No 1/3 to 3/3 designed to carry sewage and sullage water, excavation in any type of soil/ rock , PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for For 10 User.

M&L Soakage wells excavation, in any type of soil/rock, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of stone masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete of 1.2 M dia X 3.0 M effective depth as per TD Drg No CEJZ/TD/29 sheet no 1/1 TO 3/3

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft/loose soil.

Removing excavated material exc. 500m and n exc 1.5km and depositing where directed at a level above the starting point complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade and pigments, including 25 mm thick sand cushion with clean river sand duly clear of residual , organic and deleterious materials spread evenly to uniform thickness laid over DLC layer, complete all as specified and directed.

Supply, installation, testing & commissioing of heavy duty duct cooler, electric driven (three phase), top discharge having nominal air flow Each capacity of 22000 CMH, with green pad and variable speed control nobe type ABS Cooler Body complete including fabrication of GI ducting sheet of 24 gauge of necessary dimension & size as per requirement at site alongwith, core cutting of hole of necessary size as per OEM specifications, including duct grill/diffuser and air cooler canvas of necessary dimensions including necessary plumbing work & electric connection with cables/wires and MCB DB including MCB of required size as per OEM specifications Note: The rated cost also includes necessary M.S. stand of required size, duct support etc. MAKE:- SKY AIR COOLER/UNITED AIR COOLING

S&F in replacement of angular stop cock fancy type chromium plated cast copper alloy screwed down,high Each pressure, screwed ends with wall flange for 15 mm bore of iron pipe or for union and fixed in position complete all as specified and directed

S&F storage type electric water heater of 25 Ltr capacity, 240 volts rated input 2 KW PUF Each insulated fitted with stainless steel inner container and copper coil of BEE rating 5 star models, max working head of water 60 Mtrs, fixing to wall with suitable MS tower/anchor bolts, bib cock of suitable size including CPVC pipe Inlet/outlet flexible (hose braided) hot water supply pipe, grouted to wall complete all as specified and as directed. Make: Havells/Venus/BHARAT/PEARL

Supply, Installation, testing & commissioning in replacement of Solar water heating system of 200 LPD capacity having Flat plate collector-02 Nos of approx size 2m x 1m and 1000 litre Stainless steel tank SS 304 grade with puff insulation of thickness not less than 30 mm, outer cladding and check valve at inlet & outlet including necessary PCC work, electric and water connection with electrical heating back up (heating element & thermostate), flange, rubber gasket, nut, bolt washers etc Solar water heater rates include the cost of PVC sintex tank 500 Itrs control valve of suitable sizes, MS structural staging work for PVC tank and solar tanks including necessary plumbing work with duly insultated Gl pipe and pipe fittings of necessary size as per site requirement with electric connection of 2 KW heating element etc all as specified and directed by Engr-in-charge. Make: M/s Tata BP Solar system/ M/s BHEL / M/s Best & Crompton Novel

M&L for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper point conductor cable(FRLS) of size 2.5 Sqmm, 1100 volts grade including 2.5 Sqmm PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc with and including 2.5 Sqmm (nominal area) PVC insulated unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including including 1.6 mm thick mild steel sunken boxes (ISI Marked) of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of steel screws for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one, one way switches complete all as specified and directed. Make of wire:- Polycab/Finolex/Havells/Gloster/KEI Make of PVC conduit :- Polycab/Pressfit/Precision/Anchor

M&L mild steel framed/sheet work for supported structure/ ladder and similar works conforming to Fe-290 Kg Gde-E-165 including welding/cutting of steel including painting of two coats of synthetic enemal paint over one coat of primer paint (incl prepration of surface) complete all as specified and directed

NOTE:- (i)- Quantities are clubbed in BOQ for three Jobs. For which ref. under mentioned below with respective qty:- (a) 001/LBW/Jasai/2025-26- All qty's of Item No. 04, 14, 15, 16 & 17 (b) 02/LBW/Jalipa/2025-26- All qty's of Item No. 23 to item No. 28. (c) Rest item's qty details as per Appendix "1" on Sl. Pg. No. 19 of tender. (ii)- The contract sum shall be arrived at after deducting amount of schedule of "Credit" from the Total quoted amount

Devi Engineeing (BID ID -3386790)

National Rewinding Works (BID ID -3379751)