NIT NO. 3(M-6)ITEM NO.4

S/o monoblock pump sets suitable for clear water TEFC 5 HP motor F class insulation three phase, 50 Hz speed- 3000 rpm, AC supply having the discharge-960 LPM and Head 18 mtr working on 415+5% volts. The pump should be fitted with CI casing CI impeller shaft of C-40 having suction and delivery of size 80 X 80 mm. Make:- Kirloskar/Crompton/DJB Approved

Dismantling of monoblock p/set by disconnecting electric connection, removing the existing damaged M.S. base frame from the foundation by cutting of nut & bolts with the help of gas cutter and man power etc. as required and old material shifted to the store as per direction of site in charge.

Breaking of CC foundation with the help of pneumatic hammer i/c manual & heavy labour taking out the existing damaged foundation bolt etc.

Making of new CC foundation with suitable ratio of gravels, sand and cement as per standard size suitable for above p/set i/c MS foundation bolts as required.

Providing of MS base frame for mounting of 5 HP monoblock pump set complete as per site requirement.

Fitting of M.S. base frame on C.C. foundation after proper alignment/level, Fitting of p/set on the base frame with the help of necessary material as required.

Supply of heavy duty 80 mm dia M.S. bend.

Supply of M.S. black pipe 80 mm dia C class heavy duty. Make: Jindal/TATA

Supply of 80mm dia flange thickness size 12mm as per site requirement.

Supply of CI double flanged spindle sluice valve PN 1.0 IS 14846 CI body/wedge/bronze ring/SS 410 shaft construction and SS IS 6603 Gr 12,Cr12 of 80 mm size Make:-Kirloskar/IVC/DJB approved.

Supply of CI swing type non return valve as per IS 5312 PN 1.0 CI body , door/bronze to rubber rings/SS 410 hinge pin of 80 mm size. Make:-Kirloskar/IVC/DJB approved.

S/o pressure gauge of 80 mm dia having required range with accessories such as GI fitting bib cock etc. as required to complete the work.Make:-Feibig/H-Guru/DJB approved make.

S/o different size of nut & bolts of good quality.

S/o rubber insertion jointing sheet conforming IS 638/79 with ISI mark 3 mm thick Make:- Jyoti or any other make approved by DJB

Making and laying the complete line with the above material with the help of cutting, welding and grinding etc. as per site requirement.

Installation of above pump sets on the MS base frame with proper alignment, taking all safety precautions arranging all tools & tackles etc and painting the above job with two coats of anti-corrosive paint after fittings all valves, bends etc in original position with complete floor works and testing/commissioning on full load i/c cartage etc.

S/o PVC insulated flat submersible cable with copper conductor having three core Size 4 sq mm 1100 volts(100mtr per roll).Make:-Grandlay/Gloster/Havells/Universal

Installation of the new L.T. Panel at site including providing of the all material required for fixing the panel in the newly laid foundation including grouting and minor civil work as per satisfaction of engineer in charge.

Testing & commissioning of the new starter panels including testing for their manual/ automatic operations for the pumps as after making required configurations for the automatic operations in the starters. Testing of Starters at No Load and then at on Load. Testing of tripping system of starters as per requirement.

DAYAL TRADERS