Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹29 L
EMD Value
₹2.9 L
Closing Date
23 Nov 2026, 12:30 pmDue tomorrow
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EE PD PWD MATHURA
EE PD PWD MATHURA
Road Safety and Junction development work on Delhi Calcutta road Deeg Gate Tiraha near Shri Krishna Janamsthan
2026_CEAGR_1208869_6
4205/A-7 Date 31.10.2026
Open Tender
Civil Works - Others
Lump-sum
120 days
Mathura
Road Safety and Junction development work on Delhi Calcutta road Deeg Gate Tiraha near Shri Krishna Janamsthan
2 documents required · 2 mandatory
₹860
₹2.9 L
Yes
17 Nov 2026
17 Nov 2026
23 Nov 2026
17 Nov 2026
23 Nov 2026
17 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Plain Cement Concrete (PCC Grade M15) in Open Foundation complete as per Drawing and Technical Specifications.Clause 1500, 1700 & 2100. As per S.I. No. 12.08 A Case-II | 72 | Cum. | 6,150 | ₹4,42,800 |
| - | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) (Light shade pigment using white cement). As per DSR No. 11.20.1 | 728 | Sqm. | 1,020 | ₹7,42,560 |
| - | Reinforced Cement Concrete (M-20) in Open Foundation complete as per Drawing and Technical Specifications Clause 1500, 1700 & 2100. As per S.I. No. 12.08 C Case I | 73 | Cum. | 6,625 | ₹4,83,625 |
| - | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. As per DSR 5.22.1 | 3.55 | MT | 78,524 | ₹2,78,760.2 |
| - | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade and undacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applid @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work.for two coat. As per DSR No. 13.47.1 | 466 | Sqm. | 124 | ₹57,784 |
| - | Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-39, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen pre- coated fine grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces is not less than 1000C, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 516. | 900 | Sqm. | 539 | ₹4,85,100 |
| - | Providing & applying Tack Coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.20Kg./Sqm. on the prepared primed granular/old painted surface, cleaned with air compressor, including all Taxes, Material, Labour, T&P etc required for proper completion of the work. (For Bitumenous Surface). | 122 | Sqm. | 17 | ₹2,074 |
| - | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. | 7.35 | Sqm. | 13,500 | ₹99,225 |
| - | Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.40% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects | 3.15 | Cum. | 15,700 | ₹49,455 |
| - | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads 0? 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes. As per Chapter no. 28 SL No. 2 | 251 | Sqm. | 618 | ₹1,55,118 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.04 MB
6T1.pdf
Tender Documents • 3.14 MB
BOQ_2294567.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .